LIFT at BIE

Supply, transportation, installation, testing and commissioning of 13 Passenger Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including comprehensive maintenance of lifts during the defect liability period. Makes: Schindler / Kone / OTIS / Mitsubishi or equivalent -Specifications: a)Type : Machine room less,b)Pit Depth :1500 mm or as per NBC, c) Minimum Floor to Floor Height (Required) : As per Standard, d)Travel height : 12 mtrs ( As per Standard Requirement), e)Head room Height : 4.5mtrs ( As per Standard Requirement) ,f)Lintel Height (Required) : 2240mm from finished floor level +/- 10%, g)Number of persons : 13 P ,h)Rated Load : 884 Kgs, i)Number of Stops : 5 Stops , j)Number of Access sides : 1, k)Floor Designations : G, 1, 2,3,4, l)Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF).m)Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n)Speed of Travel 1.0 m/s, o)Car size : As per Standard, p)Door width : 800/ 900/1000mm or As per Standard, q)Door Height : 2000 mm or as per standard,r)Rated output motor : as per standard, s)Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling., t)Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline.Full Height mirror on rear car panel. -u)Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, Pre-announcing arrows for collective controls, 16 Segment displayv)Landing Doors : Fully automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition, w)Special Features :Closed loop control system Self Diagnostic control Overload detection Automatic evacuation to nearest floor(ARD) Light curtain on car entrance Alarm Horn Fire Switch Handrail in stainless steel finish on rear wall Auto Fan off Auto light off Intercom-3way ELEC- 15.1.1

Supply and Transportation of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years ELEC-6.1.1 - 2.0 / 1.8 TR 3 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R- 410 Makes : Daikin / Toshibha / Carrier / Blue Star / Hitachi / LG / Samsung / Lloyd or equivalent-ELEC-6.1.1

Plastering 12mm thick in two coats using screened sand(with 50% river sand & 50% manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)