REPAIR/MAINT OF WATER SUPPLY PIPELINE WITH ALLIED MISC WORKS AT BARKI COY,CARIAPPA COY,JAYANTI COY,CHQ AND REPAIR/MAINT OF CHLORINE DOZER WITH ALLIED MISC WORKS AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Amount

Taking up or taking down old unsv steel tubing and connections removal to store for the following sizes complete all as specified and directed :-

(a) 50mm bore

(b) 40mm bore

(c) 25mm bore

(d ) 20mm bore

Relaying of old GI pipe line after cleaning of joints and fittting as taking out against item No 1 for the following size :-

(a) 50mm bore

(b) 40mm bore

(c) 25mm bore

(d ) 20mm bore

Supply, fixing / laying, jointing and testing of GI pipes, medium grade, ISI marked with all fittings fixed on wall/ roof or laid in trenches/ floors complete all as specified including taking out the old pipe as directed for the following size :-

(a) 50mm bore

(b) 40mm bore

(c) 25mm bore

(d ) 20mm bore

S&F in repair sluice valve ISI Marked (IS 14846-2000), Class PN-1.6, both ends flanged with CI body, stainless steel spindle, chucknut and iron wheel etc including provision of new nuts, bolts, washers and gasket including testing complete all as specified and directed for following size :-

(a) 150mm bore

(b) 100mm bore

(c )80mm bore

S&F in repair Gun metal globe or gate valve with iron wheel head, ISI marked screwed both ends for iron pipes and fixed including taking down the old one complete all as specified and directed for the following size:-

(a) 50mm bore

(b) 40mm bore

(c )25mm bore

(d) 20mm bore

Taking up or taking down CI/DI pipe from position including opening of any type of joints for following sizes complete all as specified and directed :-

(a) 150mm bore

(b) 100 mm bore

(c) 80 mm bore

Relaying of old CI/DI pipe after cleaning of joints and fittting as taking out against item No 6 for the following size :- Note: Jointing material will be measured and paid seperately

(a) 150mm bore

(b) 100 mm bore

Supply, fixing/ laying, jointing and testing of Cast Iron pipes with spigot and socket ends centrifugally cast, Class 'LA' in any length, laid in trenches or fixed on wall complete all as specified and as directed including taking down the old pipe for the following size :- Note : Run lead joints shall be measured and paid separately.

M & L for Excavation for taking out/laying cable/GI pipe in trenches in any type of soil not exc 1.5 m wide and not exceding 1.5 m deep for GI pipe of any size complete all as specified and directed by Engineer-in-Charge

Returning filling in including spreading, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing surplus soil to distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L for run lead joints with jointing materialof size 150/100 mm dia complete all as specified.

M & L for tyton joints ( rubber gasket ) of size 100 mm dia as per existing sample complete all as specified.

M&L for valve chamber of size 1500mm x 1500mm x 860mm (internal dimention) with brick masonty valve chamber, 100mm thich PCC (1:4:8) type D2 as in foundation, 200mm thick brick wall built in CM (1:6), 50mm thich coping of PCC (1:3:6) type C1, 15mm thick plastering in CM (1:4) to all internal and exposed surface including necessary excavation and earth work in soft/loose soil, MS sheet cover 6mm thickness along with angle iron frame of size 40 x 40 x 5mm with locking arrangement with necessary fixing materials like hinges, nut bolts etc (valve chamber cover shall be opened in two valves) and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc with and including dismantling and taking out existing damaged/ rusted valve pit cover of any size from valve pit chamber complete including demolish the old one all as specified and directed.

Supply and fixing of CI/DI fittings i.e. bends (any type, radius and angle), tapers any type (straight, bend increasing, decreasing or double socket etc), T- pieces single branch, 'Y' junciton double branch, cross (all sockets or socket and spigot), collars, caps and plugs etc suitable for & upto 150mm bore pipes complete all as specified and directed.

Supply and fixing Non return valve ISI Marked (IS 14846-2000), Class PN - 1.6, both ends flanged with CI body, having counter weight with leather sheet etc including provision of new nuts, bolts, washers and gasket including testing including taking out the old one complete all as specified and directed of following size :-

(b) 100mm bore

(b) 80mm bore

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with modular size full brick subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M & L for demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in flooring on existing sub base surfaces of OH tank,pump houses finished cement concrete surface even and smooth without using extra cement including necessary form work and concrete (PCC) to be cast in alternate bays complete all as specified and directed. complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in flooring on existing sub base surfaces of OH tank,pump houses finished cement concrete surface even and smooth without using extra cement including necessary form work and concrete (PCC) to be cast in alternate bays complete all as specified and directed. complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring on existing sub base surfaces of OH tank,pump houses finished cement concrete surface even and smooth without using extra cement including necessary form work and concrete (PCC) to be cast in alternate bays complete all as specified and directed. complete all as specified and directed.

Taking down cement/ lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as spfd directed.

M&L for 15mm thick rendering on surfaces of brick work or stone walling in CM 1:6 finishing the surface fair & even complete all as spfd and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out in soft/loose Soil

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Painting of steel surface of any description, over 10cm in width or girth apply two coat of synthetic enamel paint over a coat of red oxide primar.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for moorum filling floors or pavings laid in layers n exc 15 cm thick , spread, levelled, and blind earth and rammed in cluding watering all as spesified and directed by Engr -In- Charge.

S&F in motor 370 Watt,1425 RPM,1 Ph ,suitable for operating on 220/230 V as per existing sample including taking out the old unserviceable motor complete all as specified and directed.

M & L for servicing/repairing of chlorine dozer including top up of suitable oil and making it serviceable complete all as specified and directed.

S&F MCCB TPN 63 Amp 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old one complete all as directed. Make: HAVELLS/ABB/C&S

S&F MCCB TPN 32 Amp 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old one complete all as directed. Make: HAVELLS/ABB/C&S

S&F Change over switch 63 amps euload type as per existing sample including taking out the old one complete all as directed. Make: HAVELLS/ABB/C&S

M & L for wiring of LT panel of any size and capacity to making functional ammeter,voltmeter and indication lamp including taking out the old unserviceable wiring complete as directed. Note: Ammeter, Voltmeter and indicating lamp will be measured and paid seperately while cost of PVC insulated copper wire of suitable capacity is deemed to be included in the quoted rate.

Supply, fixing / laying, jointing and testing of GI pipes, medium grade, ISI marked with all fittings fixed on wall/ roof or laid in trenches/ floors from chlorine dozer to main line complete all as specified including taking out the old pipe as directed for 25 mm dia bore including taking out the old pipe.

S&F in repair Gun metal globe or gate valve of 25 mm dia with iron wheel head, ISI marked screwed both ends for iron pipes suitable for chlorine dozer as per existing sample and fixed including taking down the old one complete all as specified and directed .

M&L for 80 mm bore DI pipes of make as approved by AGE(I) with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, in any length coforming to IS: 8329 (2000) as per latest amendments, laid in trenches with & including making rubber gasket joints (Tyton joint) and testing on completion complete all as specified and directed. Note:- Excavation and earth work shall be measured and separately under respective items of BOQ. Make:TATA/ELECTROSTEEL/JINDAL

M&L for 100 mm bore DI pipes of make as approved by AGE(I) with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, in any length coforming to IS: 8329 (2000) as per latest amendments, laid in trenches with & including making rubber gasket joints (Tyton joint) and testing on completion complete all as specified and directed. Note:- Excavation and earth work shall be measured and separately under respective items of BOQ. Make:TATA/ELECTROSTEEL/JINDAL

M & L for provisioning the overflow pipe in underground sump after making a hole suitable for 40 mm dia GI pipe and fixing a GI pipe and making the hole leakproof complete all as specidied and directed. Note : GI pipe will be measured and paid seperately

Supply, fixing / laying, jointing and testing of GI pipes, medium grade, ISI marked with all fittings fixed on wall/ roof or laid in trenches/ floors complete all as specified and directed for 40 mm dia bore including taking out the old pipe.

M/S Ramesh Chandra Agrawal

GHASI RAM SAHU

M/S Shanti Enterprises

M/S RAKESH TRADERS

BRICKS ON CLOUD INFRA