Construction of Residential Building of New Police Station at Kulpahad Dist. Mahoba

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary rock DSR 2021 2.7.1 (AOR)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift 1.5 m to 3.0 m, as directed by Engineer-in-charge. Ordinary rock

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift 3.0m to 4.50m, as directed by Engineer-in-charge. Ordinary rock

Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling, watering &ramming of excavated earth into the trenches or into the spac e between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches. SOR 251

Filling By carted earth in trenches, plinth, sides of foundation, campus etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50 m & lift upto 1.50 m. AR-1

Sand filling in plinth & trenches including supply of necessary quantity of sand from a distance from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. SOR 2020 255

Providing and laying cement ( OPC ) concrete 1:4:8 (1cement ( OPC ) :4 C. sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. SOR 2020 281

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement ( OPC ) concrete work, using cement ( OPC ) content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement ( OPC ) concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement ( OPC ), including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. All works up to Plinth level. DSR- 2021 5.33.1.1

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement ( OPC ) concrete work, using cement ( OPC ) content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement ( OPC ) concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement ( OPC ), including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.All works above plinth & up to floor V level. DSR- 2021 5.33.2.1

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete including all labour, material, T&P for proper completion of work as per directio of E/I DSR- 2021 5.9 (AOR) 5.9.1

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including all labour, material, T&P for proper completion of work as per directio of E/I 5.9.2

Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform including all labour, material, T&P for proper completion of work as per directio of E/I 5.9.3

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers including all labour, material, T&P for proper completion of work as per directio of E/I 5.9.5

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts including all labour, material, T&P for proper completion of work as per directio of E/I 5.9.6

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases including all labour, material, T&P for proper completion of work as per directio of E/I 5.9.7

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide including all labour, material, T&P for proper completion of work as per directio of E/I 5.9.16.1

Brick work with common burnt clay bricks of class-150 in foundation and plinth in: cement ( OPC ) mortar 1:6 (1 cement ( OPC ) : 6 coarse sand). DSR 2021 6.1.2

Brick work with common burnt clay bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in : cement ( OPC ) mortar 1:6 (1 cement ( OPC ) : 6 coarse sand). From G.F.+FF+SF+Terrace DSR 2021 6.4.2

Half brick masonry with common burnt clay bricks of class-150 in superstructure above plinth level up to floor V level. cement ( OPC ) mortar 1:4 (1 cement ( OPC ) : 4 coarse sand). GF+FF+SF+MUMTY DSR 2021 6.13.2

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. DSR 2021 4.13 (AOR)

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m. (4) treatment of soil along external parameter of building 7.50 lire per sq.m. (5) treatment of soil under Apron along external perimeter 5 Liters per sqm. SOR CH. 7 Add. Item

Steel reinforcement ( OPC ) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 2021 5.22.6 (AOR)

Providing and fixing ISI marked S.S. sliding door bolts with nuts and screws etc. complete size 250x16 mm AR

Providing and fixing ISI marked S.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 250 x 10 mm AR

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. :100 mm. DSR 2021 9.165.1 (AOR)

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3.15 mm M.S. gusset plates at the junctions and corners, hooks at top 25 mm dia, pullyes at bottom 40x40x6 mm and angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. complete and applying one priming coat of approved lead paint. SOR 519

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge DSR 2021 9.129 (AOR)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, with 1.0 mm thick lamination on both side and core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick SOR + DSR 2021 470+9.127.2

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, with 1.0 mm thick lamination on one side and core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick SOR + DSR 2021 470+9.127.2

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement ( OPC ) concrete block 15x10x10 cm of C.C. 1:3:6 (1 cement ( OPC ) : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR 2021 10.15.1 (AOR)

Supply and fixing of MS Grill of a appproved quality and drawing made of flat iron not bigger than 20x4 mm size including supply of materials, fabrication, labour, T&P and also one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site. SOR CH-10, New Item-03

Supply and fixing of MS Angle iron door, windows ventilation frame made of approved MS angle iron wrought to required from including drilling hole, welding and recetting where necessary and also including supply of all materials, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper complete of work at site of work. SOR CH-10, New Item-02

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes DSR 2021 10.30.1 (AOR)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading 0 9.51.2

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Second class teak wood 0 9.134.1.2.1

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia DAR 2021 9.46.2 (AOR)

Providing and laying "brick coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with fap of 15 mm to each other, over 20 mm thick base of cement ( OPC ) mortar 1:4 cement ( OPC ) and coarse sand mixed with water proofing compound spreading cement ( OPC ) slurry mixed with aerelic cement ( OPC ) concrete water proofing compound filled gaps of coba and top of coba mortar mixed with water proofing compound in 1:4 cement ( OPC ) and coarse sand mortar finished smooth and top mashed false square 30 cm x 30 cm and side wall parapet shall be monolythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement ( OPC ) and coarse sand masonary coba with top finish plaster mixed with acetic water profing compound @ 2% by weight & including S/o all material, labour, t&P etc. complete for proper completion of work. SOR CH. 11 (New Item-01)

12 mm thick plaster with cement ( OPC ) mortar in consisting of 1:6 cement ( OPC ) and approved coarse sand of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On smooth surface of wall. SOR 586+583-582

15 mm thick plaster with cement ( OPC ) mortar in consisting of 1:6 cement ( OPC ) and approved coarse sand of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On rough surface of wall. SOR (586+583-582)/12*15

12 mm cement ( OPC ) plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. (i) 1 cement ( OPC ): 3 course sand in ceiling. GF+FF+SF+MUMTY SOR 583+587

15 mm cement ( OPC ) plaster of mix : 1:4 (1 cement ( OPC ): 4 coarse sand) in single coat on rough side of single or half brick wall. In plinth. SOR (584+583-582)*15/12

Add for plaster drip course in plastered surface or moulding to R.C.C. projections SOR 5.30 (AOR)

Supply and fixing 6 mm. (¼") China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement ( OPC ) and approved coarse sand mortar finished with white cement ( OPC ) slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. (size 300X300) SOR 628

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement ( OPC ) mortar 1:4 (1 cement ( OPC ) : 4 coarse sand), joints treated with white cement ( OPC ), mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. DSR 8.2.2.2 (AOR)

Providing and laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mm x 600mm size in flooring laid with 1:3 cement ( OPC ) mortar (1 cement ( OPC ), 3 coarse sand) finishing with cement ( OPC ) slurry & with pigment grouting & Polishing complete i/c s/o all material labour T&P etc. required for proper completion of work excluding base concrete. SOR Ch-14 New Item

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement ( OPC ) slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement ( OPC ) mortar 1 : 4 (1 cement ( OPC ) : 4 coarse sand) : 20 mm thick DSR 11.26 (AOR)

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement ( OPC ) mortar 1:3 (1 cement ( OPC ): 3 coarse sand) and jointed with grey cement ( OPC ) slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR 11.27 (AOR)

Providing and fixing glass strips of 3.15 mm thickness in joints of floor and skirting at the time of laying floor, flush with floor including labour, tools and plants etc. complete. 4.5 cm depth SOR 631 (i) - c

Distempering (two coat) with OIL BOUND distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement ( OPC ) primer of approved brand and manufacture such as Berger, J&N Shalimar, Asian Paints after thoroughly brushing the sufface free from mortar dropping and other forein matter and also including prepairing the surface even with Plaster of Paris or approved synthetic material and sand papered smooth including cost of all material SOR 649+650-650

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) SOR 2020 Ch-15 Item - 13.47.1

Providing and applying white cement ( OPC ) based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. SOR 2020 Ch-15 Item - 13.8

Painting or Varnishing new iron work in small areas or new wood work with one coat (up to one sqm) of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials labour and tools and plants etc. required for proper completion of the work. Paint to be used confirm the ISI no. 103-1950 SOR 2020 641+642-642

French spirit polishing : Two or more coats on new works including a coat of wood filler DAR 2021 13.68.1 (AOR)

Making plinth protection 50 mm thick of cement ( OPC ) concrete 1:3:6 (1 cement ( OPC ): 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. DSR 2021 4.17 (AOR)

Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement ( OPC ) mortar 1:4 (1 cement ( OPC ) : 4 fine sand) DSR 2021 6.44 (AOR)

Supply and filling of Cinder in sunken portion of building including breaking into required sizes including supply of all material, labour, T&P required sizes including supply of all material, labour, T&P required for proper completion of work. SOR Ch-11, New Item-03

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement ( OPC ) slurry mixed with water proofing cement ( OPC ) compound consisting of applying : a) First layer of slurry of cement ( OPC ) @ 0.488 kg/sqm mixed with water proofing cement ( OPC ) compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement ( OPC ) @ 0.242 kg/sqm mixed with water proofing cement ( OPC ) compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR 2021 22.5 (AOR)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests SOR CH-5 sanitary installation 301a

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid DSR 2021 17.2.1

Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where required : White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 17.7.4

Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. Sink without drain board 610X510 mm bowl depth 200mm. including all labour, material, T&P for proper completion of work as per directoin of E/I 17.10.2.1

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement ( OPC ) mortar 1:4 (1 cement ( OPC ) : 4 coarse sand), joints treated with white cement ( OPC ), mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shadea rea of slab over 0.50 sqm DSR 2021 8.2.2.2 (AOR)

Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete 32mm Dia including supply of all material, labour, T&P required for proper completion of work. 17.28.2.1

Providing and fixing PTMT Bottle Trap for Wash basin and sink..Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. including supply of all material, labour, T&P required for proper completion of work. 17.70.1

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm including supply of all material, labour, T&P required for proper completion of work. 17.32.1

Providing and fixing toilet paper holder : C.P. brass including supply of all material, labour, T&P required for proper completion of work. 17.34.1

Providing and fixing soil, waste, vent pipes Centrifugally cast (spun) iron S&S pipe 100mm dia cast (spun) iron S&S pipe including supply of all material, labour, T&P required for proper completion of work. 17.35.1.2

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement ( OPC ) concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement ( OPC ) : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 100mm dia. Pipe including supply of all material, labour, T&P required for proper completion of work. SOR CH-5 sanitary installation 338

Providing and fixing heel rest sanitary bend, in 100mm Centrifugally cast (spun) iron pipe S&S including supply of all material, labour, T&P required for proper completion of work. SOR CH-5 sanitary installation 340

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 100X100X100mm Sand cast iron S&S as per IS : 3989 including all labour, material, T&P required for proper completion of work. SOR CH-5 sanitary installation 341

Providing and fixingPLAIN JUNCTION of required degree 100X100X100mm Sand cast iron S&S as per IS : 3989 including all labour, material, T&P required for proper completion of work. DSR 2021 17.44.1.2

Providing and fixing terminal guard: 100mm Sand cast iron S&S as per IS - 3989 including all labour, material, T&P required for proper completion of work. SOR

Providing and fixing collar. 100mm Sand cast iron S&S as per IS - 3989 including all labour, material, T&P required for proper completion of work. SOR CH-5 sanitary installation 350

Providing and lead caulked joint 100 Dia including all labour, material, T&P required for proper completion of work. SOR CH-5 sanitary installation 351

Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 100 mm outlet,Sand cast iron S&S as per IS: 3989 including all labour, material, T&P required for proper completion of work. SOR CH-5 sanitary installation 365

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work 100mm dia including all labour, material, T&P required for proper completion of work. DSR 2021 17.65.1

Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms DSR 2021 17.72

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall including all labour, material, T&P required for proper completion of work. 15 mm nominal outer dia pipes 201

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall including all labour, material, T&P required for proper completion of work. 20 mm nominal outer dia pipes 202

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall including all labour, material, T&P required for proper completion of work. 25 mm nominal outer dia pipes 203

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall including all labour, material, T&P required for proper completion of work. 32 mm nominal outer dia pipes 204

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall including all labour, material, T&P required for proper completion of work. 40 mm nominal outer dia pipes 205

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm nominal outer dia pipes DSR 2021 18.11.1

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 20 mm nominal outer dia pipes 18.11.2

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work 40 mm dia, nominal bore SOR CH-4 water suppy 209a

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work 50 mm dia, nominal bore 209b

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work 65 mm dia, nominal bore including all labour, material, T&P required for proper completion of work. 18.12.7

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 25mm dia, nominal bore including all labour, material, T&P required for proper completion of work. DSR 2021 18.17.1

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 32 mm dia, nominal bore including all labour, material, T&P required for proper completion of work. 18.17.2

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 40 mm dia, nominal bore including all labour, material, T&P required for proper completion of work. 18.17.3

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 50 mm dia, nominal bore including all labour, material, T&P required for proper completion of work. 18.17.4

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 65 mm dia, nominal bore including all labour, material, T&P required for proper completion of work. 18.17.5

Providing and fixing uplasticised PVC connection pipe with brass unions :including all labour, material, T&P required for proper completion of work. 45 cm length 15 mm nominal bore DSR 2021 18.21.2.1

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter including all labour, material, T&P required for proper completion of work. DSR 2021 18.22.1

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 15 mm nominal outer dia pipes including all labour, material, T&P required for proper completion of work. DSR 2021 18.38.1

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 20 mm nominal outer dia pipes including all labour, material, T&P required for proper completion of work. 18.38.2

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 25 mm nominal outer dia pipes including all labour, material, T&P required for proper completion of work. 18.38.3

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 32 mm nominal outer dia pipes including all labour, material, T&P required for proper completion of work. 18.38.4

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls) 40 mm nominal outer dia pipes including all labour, material, T&P required for proper completion of work. 18.38.5

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality including all labour, material, T&P required for proper completion of work. 40 mm dia, nominal bore DSR 2021 18.40.5

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality including all labour, material, T&P required for proper completion of work. 50 mm dia, nominal bore 18.40.6

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality including all labour, material, T&P required for proper completion of work. 65 mm dia, nominal bore 18.40.7

Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work including all labour, material, T&P required for proper completion of work. 65 mm dia, nominal bore 40 mm dia, nominal bore 18.41.5

Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work including all labour, material, T&P required for proper completion of work. 65 mm dia, nominal bore 50 mm dia, nominal bore 18.41.6

Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work including all labour, material, T&P required for proper completion of work. 65 mm dia, nominal bore 65 mm dia, nominal bore 18.41.7

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) including all labour, material, T&P required for proper completion of work. 15mm nominal bore DSR 2021 18.46.1

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) including all labour, material, T&P required for proper completion of work. 20mm nominal bore DSR 2021 18.46.2

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) including all labour, material, T&P required for proper completion of work. 25mm nominal bore DSR 2021 18.46.3

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) including all labour, material, T&P required for proper completion of work. 32mm nominal bore DSR 2021 18.46.4

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) including all labour, material, T&P required for proper completion of work. 40mm nominal bore DSR 2021 18.46.5

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) including all labour, material, T&P required for proper completion of work. 50mm nominal bore DSR 2021 18.46.6

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) including all labour, material, T&P required for proper completion of work. 65mm nominal bore DSR 2021 18.46.7

Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore SOR CH-4 water suppy 239

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. including all labour, material, T&P required for proper completion of work. 15mm nominal bore DSR 2021 18.51.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) including all labour, material, T&P required for proper completion of work. 15 mm nominal bore. 15 mm nominal bore 18.53.1

Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia including all labour, material, T&P required for proper completion of work. DSR 2021 18.58.1.1

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. DSR 2021 2.13.1.2

Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement ( OPC ) mortar in the proportion of 1:1 (1 cement ( OPC ) : 1 fine sand) including testing of joints etc. complete : 150 mm diameter DSR 2021 19.1.2

Providing and laying cement ( OPC ) concrete 1:5:10 (1 cement ( OPC ) : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe DSR 2021 19.2.2

Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 100x100 mm size P type With F.P.S. Bricks class designation 75 DSR 2021 19.4.1.1

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement ( OPC ) mortar in the proportion of 1:2 (1 cement ( OPC ) : 2 fine sand) including testing of joints etc. complete : 250 mm dia rcc pipe DSR 2021 19.6.3

Constructing brick masonry manhole in cement ( OPC ) mortar 1:4 ( 1 cement ( OPC ) : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement ( OPC ) : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement ( OPC ) : 4 coarse sand : 8 grade Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With F.P.S. bricks with class designation 150 DSR 2021 19.7.1.1

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With F.P.S. bricks class designation 150 DSR 2021 19.7.2.1

Extra for depth for manholes : Size 90x80 cm including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 150 DSR 2021 19.8.1.1

Size 120x90 cm including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 150 19.8.2.1

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement ( OPC ) mortar 1:4 (1 cement ( OPC ) :4 coarse sand) inside cement ( OPC ) plaster 12 mm thick with cement ( OPC ) mortar 1:3 (1 cement ( OPC ) : 3 coarse sand) finished with a floating coat of neat cement ( OPC ) foundation concrete 1:3:6 (1 cement ( OPC ) : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement ( OPC ) concrete 1:2:4 (1 cement ( OPC ) : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement ( OPC ), all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement ( OPC ) concrete 1:2:4 (1 cement ( OPC ) : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement ( OPC ) plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 150 DSR 2021 19.11.1.1

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S. (non modular) bricks of class designation 150 including all material, labour, T&P required for proper completion of work as per direction of E/I. DSR 2021 19.12.1

R.C.C. work with cement ( OPC ) approved coarse sand and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 in slab, excluding supply of reinforcement ( OPC ) and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. 0 288

Providing & Filling of O.B. brick ballast 25 mm to 40 mm size inside of upper layer in soak pit. Ch-11, New Item-03

Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement ( OPC ) mortar in the proportion of 1:1 (1 cement ( OPC ) : 1 fine sand) including testing of joints etc. complete, 150 dia S.W. Inlet Pipe (DSR-19.1.2)

40 mm thick cement ( OPC ) concrete flooring with concrete 40 mm thick cement ( OPC ) concrete 1:2:4 (1 cement ( OPC ) : 2 coarse sand : 4 stone grit 20mm nominal size) by volume. including supply of all materials, labour and tools and plants etc required for proper completion of work. 605

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement ( OPC ) concrete blocks 1:3:6 (1 cement ( OPC ) : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar Foot Step (5 kg/sqm.) (DSR 19.15.1) (DSR 19.15.1)

Providing and fixing soil, waste, vent pipes Centrifugally cast (spun) iron S&S pipe including supply of all materials, labour and tools and plants etc required for proper completion of work. C.I. Pipe (100 mm dia) (DSR 17.35.1.2) DSR 17.35.1.2

Providing and fixing of HCI terminal guard slitted cowel, 100 mm dia including supply of all materials, labour and tools and plants etc required for proper completion of work. C.I.cowel. SOR 439

Providing and fixing plain bend of required degree. 100 mm dia C.I. plain bend including supply of all materials, labour and tools and plants etc required for proper completion of work. (SOR 348)

Providing and fixing single equal plain junction of required degree : C.I. single equal plain junction including supply of all materials, labour and tools and plants etc required for proper completion of work. (DSR 17.44.1.2)

500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg including supply of all materials, labour and tools and plants etc required for proper completion of work. (DSR 19.18.2)

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All type of soil and 400mm dia (DSR 23.1.1.3) DSR 23.1.1.3

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia DSR 23.3.3 23.3

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia DSR 23.4

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR 23.5

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. DSR 23.6

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. DSR 23.7

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge. DSR 23.8

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in pproved laboratory, i/c disinfection of ubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per uirement and direction of Engineer-in-charge. DSR 23.12

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia DSR 23.13.3

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia DSR 23.15.3

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: Ordinary Rock and Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. DSR 2.13.1.2

Providing, laying and jointing P.V.C. pipes including testing of joints etc. complete : 200 mm dia pipe. MR

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement ( OPC ) mortar 1:4 (1 cement ( OPC ) : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement ( OPC ) : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement ( OPC ) : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement ( OPC ) mortar 1:3 (1 cement ( OPC ) : 3 coarse sand), finished smooth with a floating coat of neat cement ( OPC ) on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : DSR 19.30.3.1

Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement ( OPC ) mortar 1:4 (1 cement ( OPC ) : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : DSR 19.27

R.C.C. DRAIN work with cement ( OPC ) approved coarse sand and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 FOR DRAIN WORK, excluding supply of reinforcement ( OPC ) and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. 0 287+288-284+279b-279a

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. DSR 16.1

Granular Sub-Base with Close Graded Material (Table: 400-1): Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. For Grading-I Material (By Mix in Place Method). AOR

Construction of unreinforced, dowel jointed at expansion and construction joint only, plain cement ( OPC ) concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement ( OPC ) or any other type as per clause 1501.2.2 M30 (grade), coarse sand fine aggregates conformiung to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing)spreading the concrete with showel, rakes, compacted and expansion, construction joints applying debonding strips, primer, sealent, SOR 2020 Road Works Ch-6 Item 6.4

Providing and fixing in position pre-moulded joint filler in expansion joints. 10 mm wide in full depth including all material , T&P, labour for proper competion of work. As per direction of E/I. DSR 16.45

Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound. 10 mm wide in full depth including all material , T&P, labour for proper competion of work. As per direction of E/I. DSR 16.46.1

Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in th wall with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit with modular type switch and CR/angle/batten holder on complete in all respects. as directed by E/I including matching colour wash. 138[C] + 187[A]

Wiring point for two ways light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit and two numbers two ways modular type switches & ceiling rose/angle/batten holder complete in all respect, as directed, including matching colour wash. 139©+ 187(B)

Wiring point for H.P.M.V./ Sodium Vapour lamp with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy Duty PVC Conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire and 15 A piano type switch etc.,complete in all respect including matching colour wash. 143[C] + 187[A]

Wiring point for fan/ fresh air fan with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in th wall with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit with modular type switch and CR/angle/batten holder on complete in all respects. 140©+ 187(A)

Wiring point for Plug Point+TV Point+Aquaguard Point with 1.5mm² FR PVC Insulated with M/S copper wire with 1.5mm² Insulated M/S copper wire as earth wire drown in PVC pipe partly laid concealed in slab & partly load in the wall with modular tyhe switch, ceilling rose/angle/Batten Holder bucket sheet etc complete in all respect. as directed by E/I including matching colour wash. 141©+ 187(C)

Wiring point for Call bell with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in th wall with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit with modular type switch and CR/angle/batten holder on complete in all respects as directed by E/I including matching colour wash. 142[C] + 187[E]

Wiring point for exhaust point with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in th wall with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit with modular type switch and CR/angle/batten holder on complete in all respects as directed by E/I including matching colour wash. 144©+ 187(D)

Add for invertor wiring point for light/fan /plug with 1.50 mm Cu wire. 189 (A)

S/F of 20A/250V power plug fush type modular switch and 5 pin 20A/250V flush type universal modular socket on concealed M.S. Box including supply of all material labour T&P etc. required for proper completion of the work. 1139 [A]

S/F of 20A/250V power plug fush type modular switch and 5 pin 20A/250V flush type universal modular socket on concealed M.S. Box including supply of all material labour T&P etc. with One Number 6 Amp to 32 Amp. SPMCB.required for proper completion of the work. 1139 [A] + 1002 Cat A

S & F sheet steel enclosure surface/Flush mounting fitted with 20Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site by Engineer in charge. 1031 Cat A

S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge. 1025 (A) Cat A

S & F surface/Flush mounting 8wa ys SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge. 1024 (A) Cat A

S&F of 6 Amp to 32 Amp. DP MCB (10 KA) C Curve 1009 Cat A

S&F of 40 Amp. DP MCB (10 KA) C Curve 1010 Cat A

S & F surface/Flush mounting 6ways VTPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. 1027 [C] Cat A

S&F of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal Magnetic release. 1021 Cat A

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve 1002 Cat A

S&F of MCCB Enclosure Suitable for 80 to 100 Amp MCCB. QR

Supply and fixing of door chime on polished MDFEG / Teak ply board including making connections etc. complete in all respect. 1102

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. 2420 system lu,ems, 110 lm/W, PF>0.95, THD<10%, CRI>80, sheet thickness 0.8mm, tube with aluminnium heat with 5 year warrantee. 1413 Cat AAA

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. 4950-5500 system lumens, high poer LED with lenses, 110 lm/W, PF>0.95, THD<10%, CRI>70, potted driver set (not circuitory with 5 year warrantee. 1421 Cat AAA

Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. 1100 system lumens,ems, 110 lm/W, PF>0.95 with 5 year warrantee. 1417 Cat AAA

Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect. 330-660 system lumens,ems, 110 lm/W, PF>0.95 with 5 year warrantee. 1417(A) Cat AAA

S/F of M.S. Drum with luvers Making Hole Complete in all respect. 1122 (A)

Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. 1109

Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 1131 BOQ-A

Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 1132 BOQ-A

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 725 (B)

Supply and fixing of Two number 8 SWG Cu wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. 724

S/L of 35 sq mm size 3-1/2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 501[J]

Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable ) but in 20 mm dia heavy duty (2mm thick) PVC conduit concealed in wall, with with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire etc., complete in all respects including matching colour wash etc. complete in all respect. 1304 ©

Supply and wiring of submain with two number 6 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable but in 25 mm dia heavy duty (2mm thick) PVC conduit concealed in wall, with with 1 number 4 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire etc. complete in all respects including matching colour wash etc. complete in all respect. 217 ©

Supply and wiring of submain with two number 10 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable ) but in 32 mm dia heavy duty (2mm thick) PVC conduit concealed in wall, with with 1 number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire etc. complete in all respects including matching colour wash etc. complete in all respect. 218(c)

Supply and wiring of submain with two number 16 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable ) but in 32 mm dia heavy duty (2mm thick) PVC conduit concealed in wall, with with 1 number 10 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire etc. complete in all respects including matching colour wash etc. complete in all respect. 219(c)

Supply and wiring of submain with 4 number 25 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable ) but in 50 mm dia heavy duty (2mm thick) PVC conduit concealed in wall, with with 1 number 10 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire etc. complete in all respects including matching colour wash etc. complete in all respect. 275 (c)

Supply and fixing of 4 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[a]

Supply and fixing of 6 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[b]

Supply and fixing of 10 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[c]

Supply and fixing of 16 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[d]

Supply and fixing of 25 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[e]

Supply and fixing of 35 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[f]

Supply and fixing hexagonal/RoundG.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm& brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. 1149

Supply of ceilling fans with fan motor A.C Permanent insulation capacitor rating conforming BEE5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 ,volts 50HZ, 1-ph AC the fan assemble should consists of down rod blades , shakle canopies etc with double ball bearing system. (i) BEE 5 Star rated - 1200mm sweep. 1501 (i)

Supply and fixing of electronic fan regulator ( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. 1203[c]

Erection and testing of ceiling fan and regulator etc. excluding supply of down rod, complete in all respect. 1115

Erection and testing of Fresh air fan/exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect. 1120

Supply and fixing and concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. (For Teliphone Wire and TV Cable.) 149(A)

Supply and fixing of LED Mirror Light batten fitting suitable for up to 1 X 10 watt LED tube light on surface complete in all respect. Havells / Equivelent make. AR

S/F of Fresh air fan 300mm size, turbo force comlete in all respect. AR

S/F of L.E.D Bulb 15 W . AR

S/F of Exhaust fan 300mm size, turbo force comlete in all respect. AR

Providing laying and fixing of 100 mm dia GI pipe (Medium Pipe) in ground complete in all respects with GI fitting includinng trenching (75 cm deep) and refilling etc as required.P.S No-: 14.13.3 (DSR-18)

S/F of three phase Prepaid meter up to 45 kw capacity fitted in intrigral box on wall comlpete in all respect. Annexure-26 Cost data Book

S/F of telephone socket outlet moduiar switch/ socket on the existing modular plate and switch box including connection but excluding modular piate etc as required. DSR

S/F of TV antena socklet uotlet moduiar switch/ socket on the existing modular plate and switch box including connection but excluding modular piate etc as required. DSR

Supply and Drawing Co axial T V Cable. RG-6 grade ,.70 mm solid copper conductor Shield with fine tinned copper braid and protected with pvc sheath in the existing surface/ recessed steel/ PVC Conduit as required. DSR

S/L of 400 sq mm size 3-1/2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 501[t]

S/L of 300 sq mm size 3-1/2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 501[s]

S/L of 95 sq mm size 3-1/2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 501[n]

S/L of 25 sq mm size 3-1/2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 501[J]

Supply and fixing of 400 sq mm brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503[t]

Supply and fixing of 300 sq mm brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503[s]

Supply and fixing of 95 sq mm brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503[n]

Supply and fixing of 400 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[o]

Supply and fixing of 300 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[n]

Supply and fixing of 240 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[m]

Supply and fixing of 150 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[k]

Supply and fixing of 95 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[i]

Supply and fixing of 50 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504[g]

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 717

S/F of Sub feeder piller panel with 01 No.320 Amp 4 Pole MCCB incoming and outgoing Multi Connection Bus bar with Reference Meter Chamber ( 500 mmx 500 mm) complete With Digital meetering phase indicator Double Door Out Door Type Febrication 16 SWG CRCA Sheet Complete in all respects. QR

S/F of Sub feeder piller panel with 01 No.160 Amp 4 Pole MCCB incoming and outgoing Multi Connection Bus bar with Reference Meter Chamber ( 500 mmx 500 mm) complete With Digital meetering phase indicator Double Door Out Door Type Febrication 16 SWG CRCA Sheet Complete in all respects. QR

S/F of Sub feeder piller panel with 01 No.100 Amp 4 Pole MCCB incoming and outgoing Multi Connection Bus bar with Reference Meter Chamber ( 500 mmx 500 mm) complete With Digital meetering phase indicator Double Door Out Door Type Febrication 16 SWG CRCA Sheet Complete in all respects. QR

Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. 647

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect 6600-7920 systems lumens, High Power LED with lenses > 110lm/W, PF › 0.95, Potted driver set (Non circulatory), Phase to Phase protection at 440V&>300V auto cut and re-start features with 5 year warrenty. 1422 Cat-AAA

S/F of 6 Amp to 32 Amp DPMCB for Controlling street light, Including Cost of din mounting rail,connecting strip,earth linked etc. complete in all respect. AR

Making connection of each street light fitting by S/L 1.50 sq mm FRLSH copper m.s wire from pole busbar box to street light fitting.( for single Bracket Light.) AR

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 15 A SPN 807 a(II)

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 701

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 716

Providing, laying and fixing following dia GI pipe (Medium class) in ground complete with GI fittings includinng trenching (75 cm deep) and re-filling etc as required. 50 mm dia DSR-14.13 14.13.1

Supply and laying of 6 sq. mm 2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 501 (a)

Supply and fixing of 6 sq. mm 2 core brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 (a)

Providing and Fixing of self illuminated/auto glow exit signs printed on photo-luminescent sheet containing self illuminated base chemical of appropriate size not less than 400 x 150 mm suspended from ceilling or fixed to the walls with accessories as required and as directed at site. DSR

Supply, Installation, Testing and Commissioning of electric driven terrace pump suitable for automatic operation and consisting of following complete in all respects as required (TerracePump) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-F insulation, conforming to IS-325 M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plasted and with anti vibration pads. 450 lmp at 35 m Head DSR

Providing, Laying, Testing & Commissioning of 100 mm dia C Class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. DSR

Providing, Laying, Testing & Commissioning of 80 mm dia C Class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. DSR

Supply, Installation, Testing and Commissioning of 80 mm dia Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. DSR

Supply, Installation, Testing and Commissioning of 100 mm dia Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. DSR

Providing, Installation, Testing and Commissioning of 100 mm dia Non-Return Valve of following size conforming to IS 13095 complete with rubber gasket, GI bolt, nuts, washers etc. as required. DSR

Providing, Fixing, Testing and Commissioning of 100 mm dia resilient rubber lined single Arch Vibration Eliminators suitable for raw water up to 45 0c temperature, working pressure 8.8 kg/cm² and test pressure 20 kg/cm² for:- DSR

Supplying and Fixing single headed Internal Hydrant Valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank gunmetal/stainless steel cap and chain as required. single headed stainless steel DSR

Supplying and Fixing 63 mm dia 15m long RRL Hose Pipe with 63 mm dia male and female coupling duly bound with GI wire, rivets etc. conforming to IS 636 (Type-A) as required. Stainless steel (Grade 304) DSR

Supplying and Fixing 63 mm dia gun metal short Branch Pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. Stainless steel DSR

Supplying and Fixing First-Aid Hose Reel with MS construction sprey painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type-2 as per IS 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & MS pipe and socket. 30 m DSR

Providing & Fixing of 1.5 mm thick MS/Door Frame door capable of accommodating fire hose reel, landing valve, hose pipes, fittings & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample befire ordering) cost of fire extinguishers not included in item rate. (Liasioing with civil contractor for making recessed type mansoary box by civil contractor) 1200 x 900 mm (Indoor Cabinet) Only Frame DSR

Providing & Fixing of cast iron air release valve of 25 mm dia includinng 25 mm dia Ball valve with fittings etc. as per the requirement. DSR

Supply and Fixing of Tarrace PVC Tank having capacity 5000 Liter. SOR of Civil Circle Jhansi.

SITC of Automatic Panel of Terrace Pump for Suitable HP Tarrace Pump. CE (E/M)-Circular-786 ईएम/13ईडब्लूई सी0ई0(ई/एम) वृत्त/2020-21, दिं0-15.05.20

M/S S.P. AND COMPANY

M/S SAI DEVELOPER

M/S RAJ CONSTRUCITON