Dismantling and removing of a portion of existing damaged loco track from LM9 section and relaying of loco track with cold bending of rails in workshop premises

Removing of a portion of existing Loco Track carefully from LM 3 Section, LM 9 Section carefully without any damage to the loco rails by chipping /cutting of concrete / Bitumen and stored in a safe place for reuse including cleaning and removing and preparing for welding of new additional sleepers , lead, lift etc., complete.

Cold bending of 18 Nos of 6 Mtr long loco rails to make suitable curvature from LM 3 Section, LM 9 Section inclusive of transport charge.

Cutting of Galvanised MS Angle 45x45x6 mm to the cut length of 1220mm for the fabrication of sleepers to the laying of lock track within the central store premises

Charges for welding of Galvanised MS Angle 45x45x6mm for the fabrication of MS channel 95x40mm for loco track sleepers.

Fabrication of various steel sections for additional support to the sleepers including all labour charges lead,lift charges including the cost of steel sections.the required steel sections(channel,angle,flats) will be supplied bY TANGEDCO.

Electricity charges for welding at the rate ofRs 8.05/unit for 30 units per shift and for 6 shifts.(Will be provided by Tangedco which has TO BE DEDUCTED FROM CONTRACTORS BILL)

Providing steel reinforcement using high strength deformed TMT Bars having characteristic strength of for all RCC works including cutting, bending, binding, tying and placing in position including cost of steel, binding wire, lead, lift and etc., complete as directed by the Engineer in charge

(Earth work excavation for foundation and depositing on bank with initial lead of 10m & initial lift of 2m as directed by the Engineer in charge including all Labour charges, Lead, Lift, T&Ps etc., complete.)In all types of soils such as earth, SDR, medium rock, dense medium rock not requiring blasting.

(Earth work excavation for foundation and depositing on bank with initial lead of 10m & initial lift of 2m as directed by the Engineer in charge including all Labour charges, Lead, Lift, T&Ps etc., complete.)Removing hard rock by wedging, chiseling and trimming to proper shape where blasting is prohibited

Providing Random Rubble soling with filling crusher dust as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, leads, lifts etc., complete

Providing P.C.C. 1:4:8 using 20mm HBG metal for over a soling as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, leads, lifts etc., complete

Providing R.C.C. 1:1.5:3 mix for rail raft beam using 12mm to 20mm graded HBG metal with adding admixture Conplast SP 430 or its eqivalent material 150ml for 50 kg of cement as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.water will be provided by TANGEDCO and the charges to be borne by the contractor.

Refilling with excavated earth well -watered and consolidated in layers of not more than 150mm thick in foundation and basement as directed by the Engineer in charge including all Labour charges, Lead, Lift, T&Ps etc., complete.