REPAIRS MAINT OF CERTAIN BR DAY TO DAY MAINT WORK IN NEW NAVY NAGAR UNDER AGE BR I OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

M&L in repair 100mm stainless steel grating doom with waste hole complete all as specified and as directed.

Supply and fixing in repair CP brass swan neck type pillar tap of 15mm dia, screwed down high pressure fancy type complete all as specified and directed by Engg-In- Charge

S&F in repair 15 mm stop valve cast copper alloy with fancy type chromium plated with high pressure, with crutch butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Supply and fixing PVC connection of 15 mm size with PTMT nuts of length 600 mm length complete all as specified and directed by Engg-In- Charge

S&F in repair for chromium plated brass telephonic health faucet shower with flexible tube of stainless steel, 1.00 Mtr long with CP holder, multi flow 15mm dia for iron pipe or for brass ferrule etc. complete all as specified and as directed.

S & F in repair 40mm/32mm dia PVC waste pipe of 900mm for drain of water from WHB and Sink.

S&F in repair 40mm SS Sink waste coupling (half or full threaded) complete all as specified and directed

Material & Labour in repair 32 mm dia SS waste coupling (half or full threaded) complete all as specified and directed by Engg-In- Charge

S&F in repair SS flange 50 mm dia complete all as specified and directed.

Material & Labour 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs complete all as specified and as directed by Engg-In- Charge.

Supply and fixing in repair vitreous china wash down water closet (EWC) (Pedestal) P or S trap including PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper. Complete all as specified and as directed.

S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including making good to floor.

Supply and fixing in Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets complete all as specified and as directed by Engg-In- Charge.

S&F in repair Sinks with drainage board made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm. Complete all as specified and as directed.

Supply and fixing in repairs stainless steel plate rack 0.63mm thick stainless steel sheet overall size stainless steel plate rack 31” x 31” x 10” kitchen rack all as specified and as direted by Engg-In- Charge.

S&F in repair washer for flushing tank/pillar tap etc complete all as specified and directed.

S & F in repairs lever operated 15 mm dia angular type chromium plated brass Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

Supply and fixing in repair 40mm UPVC pipes in any length fixed to wall with clamp incl all fittings like sockets, bend, junction, elbow etc. complete all as specified and directed by Engg-In- Charge.

S&F in repair soap dish stainless steel and fixed with screw including wooden/plastic cleats complete all as specified and directed.

S&F in repair towel rail CP 20 mm dia 750 mm long all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair SS auto closing hinges openable at 0/90 degree for kitchen cabinet shutters,

Supply & Fixing in repair stainless steel handles 100 mm size for kitchen cabinet shutters,

Supply and fixing in repair 100mm size SS butt hinges fixed with SS screws complete all as specified and as directed by Engg-In- Charge.

Supply and fixing in repair 150 mm long aluminium anodised barrel tower bolts of extruded section fixed with SS screws complete all as specified and as directed by Engg-In- Charge.

Supply and fixing in repair 150mm size extruded aluminium alloy handles, fabricated type anodised fixed with SS screws complete all as specified and directed by Engg-In- Charge.

Supply and fixing in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm fixed with SS screws complete all as specified and directed by Engg-In- Charge

Supply and fixing in repair Floor door stopper of 140mm aluminium alloy body and tongue with hard drawn steel spring fixed with SS screws complete all as specified and directed by Engg-In- Charge

Supply and fixing in repair hasp and staple 150mm size, safety type, aluminium anodised with mild steel hinge pin fixed with SS screws including bolt to hinge plate and fixed with screw.

Supply and fixing in repair magic eye fancy type of brass for door including drilling cutting of holes and making good complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC cabinet size 450x600mm with looking mirror in white colour complete all as specified.

Material & Labour in repair stainless steel 25mm dia curtain rod complete all as specified and directed by Engineer-In-charge.

Supply and fixing in repair stainless steel 100mmx20mmx1mm fancy type brackets incl stainless steel domes 25mm dia complete all as specified and directed by Engineer-In-charge.

S & F in repair of 04 pieces pulley operated cloths drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.50 mtr with pulley made up of Devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope. Channel to be dia of minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs. including taking down old unserviceable pulley complete all as specified & directed by Engineer-in-Charge. Make : As per sample approved by GE

Taking down cement or cement lime plaster on brick or stone walls, any description complete as directed by Engr-in-charge.

Material & Labour for cement plaster 15 mm average thick using factory manufactured pre mix/ready mix having minimum composition of C:S :: 1:6 on internal wall surface complete all as specified and as directed by Engg-In- Charge.

All as per item No 36 above but 10 mm thick in C:S:: 1:3 on ceiling complete all as specified and directed.

Complete removal of existing treatment on wall, ceiling, roof projections including facia, cornices etc by scrapping with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc and wash with water by skilled labour upto 15 storey height of bldg complete all as specified and directed.

M&L for 3mm thick wall care putty on wall/ceiling in three coats, thickness of each coat n.exc 1.00mm thickness complete all as specified and directed.

M&L for Prepration of new plastered surfaces of walls and applying one coat of primer complete all as specified and direceted.

M&L for applying one first coat oil emulsion distemper on surface of wall including prepration of surface complete all as specified and direceted.

M&L for applying one second coat oil emulsion distemper over first coated distempered wall surface including prepration of surface complete all as specified and direceted.

Material & Labour for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed by Engg-In- Charge.

All as per item No 43 above but one coat on old surface of ceiling.

Material & Labour for preparing old previousely treated wooden surfaces over 10 cm of width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engg-In- Charge.

Material & Labour for preparaing of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed by Engg-In- Charge.

Demoliton of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar

Material & Labour for machine cut pre-polished kota stone slab as in flooring, steps, window cill and jams etc or similar work 18-20mm thick over and including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes laid and jointed with grey cement slurry mixed with pigment in cement mortar (1:6) to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-In-charge. (Note : The rate includes the cost of cement screed bed)

M&L for 18-20 mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over and including bedding layer of 20mm thick screed bed or bedding layer of mortar in C:S :: 1:4 for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Complete all as specified and as directed by Engr-in-Charge.

Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engg-In- Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposal of debris out side the MoD land etc complete all as specified and directed by Engg-In- Charge.

M&L Non - skid coloured ceramic tiles 7 to 8 mm thick of size area of each tile exc 0.09 Sqm but n.exc 0.18 Sqm in floors over and including 20 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match (Note : Cost of 20 mm thick screed bed and epoxy grouting is included in the rate).

Material & Labour for coloured glazed ceramic tiles in vertical surface 300x450x7 to 8mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge.

Material & Labour for coloured joint free ceramic tiles of size 600mmx600 9to 10mm thick in floors over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge.

Ditto all as per item No 54 above but as in skirting over & including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge.

Taking down shutter exc 1 Sqm but nexc 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed by Engg-In- Charge

Taking down shutter nexc 1 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed by Engg-In- Charge

Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each and complete all as specified and directed by Engg-In- Charge.

Taking down Shutters of any description n exc 1 Sqm each complete all as specified and directed by Engg-In- Charge.

Supply and fixing 2nd class hard wood 35mm thick factory made plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial or 12mm veneered particle board with commercial veneer on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed by Engg-In- Charge.

Suppling and fixing 2nd class hardwood 35mm thick skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engg-In- Charge.

M&L for 18-19mm thick Block boards, grade1 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws to timber frame-work including teak wood lipping, 6mm thick fixed with nails as in Cup board shutter and shelves complete all as specified and directed.

Suppling and fixing in repair 2nd class hardwood mitred beads of size 15mm x 20mm for securing wire mesh etc complete all as specified and directed by Engg-In- Charge.

Supply and fixing 2nd class hard wood plain, solid straight chowkats and frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engg-In- Charge.

Taking down chawkhats or frame (w/o taking off shutters from the frames) but exc 1.50 but n.exc 4.00 Sqm each complete all as specified and directed by Engg-In- Charge.

Taking down chowkats or frame (w/o taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed by Engg-In- Charge.

Material & Labour for preparing new wood or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engg-In- Charge.

Supply and fixing MS holdfast, wall ties and similar articles confirming to Fe-290 Gde- E-165 complete all as specified and directed by Engg-In- Charge.

M&L for PCC (1:3:6) type C-1 (20mm graded agg) for fixing of hold fast complete all as specified and directed by Engg-In- Charge.

S&F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S Square tube, all as per specification and drawing upto 4 storey.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawing upto 4 storey.

Supply and fixing 100mm size SS butt hinges fixed with SS screws complete all as specified and as directed by Engg-In- Charge.

Supply and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section fixed with SS screws complete all as specified and as directed by Engg-In- Charge.

Supply and fixing 150mm size extruded aluminium alloy handles, fabricated type anodised fixed with SS screws complete all as specified and directed by Engg-In- Charge.

Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm fixed with SS screws complete all as specified and directed by Engg-In-Charge.

Material and labour in repair for aluminium anodised powder coated grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aparture 50mm) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair 4.00 mm thick plain glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame/wooden frame including hacking out old one complete all as specified and directed by Engg-In- Charge.

Material & Labour Aluminium alloy wire cloth, 0.35mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding complete all as specified and directed by Engg-In- Charge.

All as per Item No 78 but fixed in repairs complete all as specified and directed by Engg-In- Charge.

SRI SAIRAM COUNSTRUCTION

jkconstruction

SHREE JAGDISH FURNITURE CO.

SHRI SAI ENTERPRISES

P LAXMI AND CO.