SEWAGE SCHEME BHIWANI TOWN...

COPPER CABLE: Supply, erection, testing and commissioning of IS marked 3core Copper Cables, Solid Copper conductor up to 6sqmm and balance Stranded Copper, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Glavanised wire for cables up to 10x1.5sqmm, 8x2.5sqmm, 2x10sqmm, 3x10sqmm, 4x6sqmm and balance all galvanized steel strip), extruded PVC type ST2Outer Sheathed, /1100V grade as per IS 7098(Part 1) 1988with up to date amendments along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-incharge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables.70Sqmm size

COPPER CABLE: Supply, erection, testing and commissioning of IS marked 3core Copper Cables, Solid Copper conductor up to 6sqmm and balance Stranded Copper, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Glavanised wire for cables up to 10x1.5sqmm, 8x2.5sqmm, 2x10sqmm, 3x10sqmm, 4x6sqmm and balance all galvanized steel strip), extruded PVC type ST2Outer Sheathed, /1100V grade as per IS 7098(Part 1) 1988with up to date amendments along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-incharge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables.25Sqmm size

COPPER CABLE: Supply, erection, testing and commissioning of IS marked 3core Copper Cables, Solid Copper conductor up to 6sqmm and balance Stranded Copper, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Glavanised wire for cables up to 10x1.5sqmm, 8x2.5sqmm, 2x10sqmm, 3x10sqmm, 4x6sqmm and balance all galvanized steel strip), extruded PVC type ST2Outer Sheathed, /1100V grade as per IS 7098(Part 1) 1988with up to date amendments along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-incharge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables.16Sqmm size

Motorized Gate valve: Removal of existing gate valves and Supply, Installation, Testing and Commissioning of motorized gate valves as per design in existing Channels (MOC of valve SS-316) including Electrical Panels, Electro-mechanical actuator non intrusive type with IP-68protection with manual override wheel integrated with central PLC/SCADA, cables along with tray, Civil works, elctric and instrumentation work complete in all respect as Per Specifications and make mentioned in the DNIT.

Mechanical Grit Mechanism: Desilting, cleaning and removal of existing grit mechanism and Supply, Installation, Testing and Commissioning of Mechanical Grit mechanism including screw classifier, deflector, Electro-mechanical actuator non intrusive type with IP-68protection with manual override wheel integrated with central PLC/SCADA, scrappers, valves, cable with tray, panel, Organic return pump with drive head, scrapper, valves, electric and instrumentation work in existing grit channel for 15 MLD average flow with peak factor 2.25complete in all respect as per specification mentioned in DNIT

AIR BLOWER: Removal of existing blowers including all components. Supply, Installation, Testing and commissioning of Rotary Twin/Tri Lobe type Air Blower having capacity 3750NM³/Hr along with suitable size main header MS pipe epoxy coated, electric motor, acoustic, VFD panels including Electromechanical actuator with IP-68protection integrated with central PLC/SCADA, suitable size Power, control/signal cables along with tray and all other civil, electrical, mechanical and instrumentation work complete in all respect as per the specifications of DNIT`

CENTRIFUGE: Removal of installed damaged centrifuge pumps, Providing and installing 2no. centrifuges as per design (1Working plus 1Stand bye) including, feed pump, VFD panels with Electro-mechanical actuator with IP-68protection integrated with central PLC/SCADA, suitable size Power, control/signal cables along with tray, replacement of all open and underground pipe fittings and all other civil, electrical, mechanical and instrumentation work complete in all respect as per the specifications of DNIT

CHLORINATION SYSTEM: Design, installation, Testing and commissioning of Chlorination system including chlorine dosing pumps, Emergency equipments, complete in all respect. for 15.00MLD STP complete in all respect and entire satisfaction of Engineer-in-charge

Electromagnetic Flow meter: Supply, installation and commissioning of Electromagnetic Flow meter of 800 mm Dia, 4-20mA output and RS-485communication complete in all respect as per specifications mentioned in DNIT (2at treated effluent)

Supplying, Installation, Testing and Commissioning of ‘Silent Type Diesel Generating set as per CPCB IV plus or better norms along with having Prime Power Rating of KVA as below, 415volts at 1500RPM, 0.8 lagging power factor at 415V suitable for 50Hz, 3 phase system, including testing at factory and site with fuel, load for test and other necessary arrangements with rating plate as per relevant IS Code etc. and consisting of the followings: (A) Diesel Engine: Turbocharged Diesel engine 4stroke water cooled, multi cylinder, dynamically balanced fly wheel, electric start of suitable BHP at 1500RPM suitable for above output of alternator at 40Deg C, 50%RH and at 1000Meter MSL , capable of taking 10%over loading for one hour after 12hours of continuous operation. The engine will be with Electronic governor, Dry type Air filter with service indicator, first filling of engine fuel (after commissioning) lubricating Oil, Coolant and other consumables complete with all the required accessories, the Electronic governor shall be as per ISO 8528.The engine shall comply to the latest CPCB norms (CPCB IV plus or better) and Conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018. (B) Engine mounted Instrument Panel fitted with and having digital display for following: (As per HSR, Gazette notification no. 15-2026Dated on: 13April 2026) (i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication and Voltage indication (vi) RPM indication (vii) Over speed indication (viii) Low lubrication Oil trip indication (ix) Engine Running Hours indication (x) Fuel Level` (C) Alternator: Synchronous alternator rated of appropriate KVA, 415volts at 1500RPM, 3phase 50Hz, AC supply with 0.8lagging power factor at 40 0C, 50%RH and at 1000Meter MSL. The alternator shall be having Screen Protected Drip Proof (SPDP) enclosure IP23, brushless, continuous duty, dynamically balanced rotor, capable of taking 10%over loading for one hour after 12hours of continuous operation, self cooled,self-excited and self-regulated through AVR conforming to IS13364(Part 2)/IS: 4722/BS 2613suitable for tropical conditions and with class- H insulation. (D) Base Frame and Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. (E) FUEL TANK: Daily service fuel tank of suitable liters capacity, fabricated out of 3mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications and accessories as required as per specifications. (F) Exhaust System: Dry exhaust manifold with hospital type exhaust silencer and catalytic convertor. (G) Starting System: 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable numbers of batteries (180AH capacity lead acid SMF type) as required as per specifications. The battery shall be housed inside the acoustic enclosure of DG Set. (H) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine and alternator, extraction, discharging hot air in to the atmosphere and the temperature rise inside the enclosure, noise level outside enclosure. The acoustic enclosure should be suitable for cable connection/conection through bus-trunking. Such arrangements on acoustic enclosure should be water proof and dust-proof conforming to IP-65protection. The enclosure shall be as per CPCB IV plus or better norms etc. and. (I) AMF Panel: Free standing floor mounted IP 42automatic mains failure control panel including auto bypass, suitable for KVA as below for silent type DG set complete with relays, timers, set of CTs for metering and protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA (Phase and Total), KW and provision for overload, short circuit, restricted earth fault, under frequency, power (aluminium) and control (copper ) cabling of suitable size upto 15meter between AMF panel, LT Panel and DG Set including connection interconnection etc. as required, all complete and inter locking and communication/ Ethernet /RS485/SNMP port open protocol for BMS integration including suitable software etc. as per approved by Engineering in charge and including the following: 1. Suitable numbers and appropriate capacity 4pole motorised electrically operated draw out with cradle type 3position ACB/ MCCB with electronic release for O/C and E/F and shunt trip. `2. Auto/Manual/Test/Off selector switch 3. Protection for under and over voltage phase reversal (2nos Over voltage relay, 2Nos. reverse power relay and 2Nos. under voltage relay). 4. 3Sets of current transformers 15P 10accuracy for protection and 15VA class-I for metering 5. Energy analyser unit to indicate current, Voltage( LN and L_L), kW, kVA (Phase and Total), Frequency, KWH, PF. 6. LED Indicating lamps for load on mains and load on set 7. Fuse/ MCB for instruments 8. Battery charger, complete with transformer/ rectifier,D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment. 9. Main supply failure monitor 10. Supply failure timer 11. Restoration timer 12. Control unit with three impulse automatic engine start/stop and failure to start lockout. 13. Impulse counter with locking and reset facility. 14. ON/OFF/Control circuit switch with indicator 15. Audio/Video annunciation for (i) High water temperature (ii) Low lubricating oil pressure (iii) Engine over speed (iv) Engine fails to start (v) Full load/maximum load warning 16. Protection for over/under Frequency, Loss of AC sensing, Over Current, Unbalancing load with suitable number of relays and accessories 17. Maintenance notification based on Engine Run Hour and due date. 18. Load Management through PLC to achieve auto opening and closing of incomer breakers, bus coupler switching of essential panel, interlocking providing signal to AMF Panel for load status and AMF shall give command to DG Set to auto start / auto stop depending upon load status and requirement etc. and necessary hardware and software required to perform the operation shall be provided by the contractor including all control wiring. 19. Suitable rating of AC contactors/ ATS / ACB with control wiring.` 100KVA