REPAIR MAINT OF SERVICING OF DG SETS WITH CONNECTED ITEMS, SOLAR WATER HEATERS, LIGHTNING CONDUCTORS, RO PLANTS, SOLAR STREET LIGHTS, CRANES, COMPRESSOR ETC. WITH MISC ITEMS AT JUTOGH, KELVIN GROVE SANJAULI, KUFRI AND CHAIL UNDER GE JUTOGH

Amount

Servicing of DG Set of capacity 630 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump , cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction complete all as specified and directed. Make of DG Set: Cummins Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under relevent items. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Lubrication Oil filter with seal/ gasket / ring suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.

Fuel filter with gasket suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.

By Pass fuel filter with gasket suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.

Element air cleaner(Air filter) inner and outer suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.

Fan belt set suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.

Repair, maintenance and cleaning of radiator of DG set (630 kVA) incl dismenteling and taking down carefully, draining and refixing after repair incl cleaning, repairing , soldering , brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately.

S&F in replacement of water body suitable for 630 kVA DG Set (Cummins) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F in replacement of fuel pump suitable for 630 kVA DG Set (Cummins) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F in replacement of high pressure rubber hose pipe upto length 1.2 mtr and required dia as per sample incl clamp/nuts and other connecting items suitable for 630 kVA DG Set (Cummins) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F of self starter motor 24 volts suitable for DG set (Cummins) of caacity 630 kVA incl dismantling and taking down old unser from DG set complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F of alternator for charging battery 24 volts suitable for DG set (Cummins) of caacity 630 kVA incl dismantling and taking down old unser from DG set complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

Servicing of DG Set (Make: Kirlosker) of capacity 125 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly turbo etc and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump and cleaning oil sump,and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under successive items here-in-after. However, labour charge are deemed to be included in item rate above. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Servicing of DG Set (Make: Mahendra) of capacity 63 kVA-100 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump and cleaning oil sump,and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under successive items here-in-after. However, labour charge are deemed to be included in item rate above. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Lub Oil filter with gasket suitable for 63 kVA to 125 kVA DG Set complete all as specified and directed.

Fuel filter with gasket suitable for 63 kVA to 125 kVA DG Set complete all as specified and directed.

By Pass fuel filter with gasket suitable for 63 kVA to 125 kVA DG Set (Cummins) complete all as specified and directed.

Element air cleaner(Air filter) inner and outer suitable for 63 kVA to 125 kVA DG Set complete all as specified and directed.

Fan belt set suitable for 63 kVA to 125 kVA DG Set of any type any make complete all as specified and directed.

Repair, maintenance and cleaning of radiator of DG set (63-125 kVA) incl dismenteling and taking down carefully, draining and refixing after repair incl cleaning, repairing , soldering , brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately.

S&F self starter motor 24 volts suitable for DG set (Kirlosker) of caacity 125 kVA incl dismantling and taking down old unser from DG set complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F of self starter motor 12 volts suitable for DG set (Mahendra) of caacity 63 kVA- 100 kVA incl dismantling and taking down old unser from DG set complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F in replacement of water body suitable for 125 kVA DG Set (Kirlosker) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F in replacement of water body suitable for 63-100 kVA DG Set (Mahendra) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F in replacement of fuel pump suitable for 63-100 kVA DG Set (Mahendra) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

S&F in replacement of high pressure rubber hose pipe upto length 1.2 mtr and required dia as per sample incl clamp/nuts and other connecting items suitable for 63-125 kVA DG Set incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.

Servicing of diesel fire pump (Make: Kirlosker) of capacity 90 BHP ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump and cleaning oil sump,and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction complete all as specified and directed. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under successive items here-in-after. However, labour charge are deemed to be included in item rate above. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.

Lub Oil filter with gasket suitable for fire pump set complete all as specified and directed.

Fuel filter with gasket suitable for fire pump Set complete all as specified and directed.

Element air cleaner(Air filter) inner and outer suitable for fire pump complete all as specified and directed.

Fan belt set suitable for fire pump complete all as specified and directed.

Repair, maintenance and cleaning of radiator of fire pump incl dismenteling and taking down carefully, draining and refilling coolant incl cleaning, repairing , soldering , brazing etc complete with the help of proper cleaning agent and wire brushtesting and refilling complete all as specified and directed. Note: Coolant will be measured and paid separately.

New dehydrated Engine/lubrication oil as per required grades suitable for 63 kVA to 630 kVA DG Sets of complete all as specified and directed.

Inhibitor corrosion , antifreez / Coolant suitable as per requirement for 63 kVA to 630 kVA DG sets complete all as per directed.

S&F in replacement maintenance free battery 12V 180 AH, incl dismantling and taking down old unser batteries complete all as specified and directed.

S&F in replacement maintenance free battery 12V 150 AH, incl dismantling and taking down old unser batteries complete all as specified and directed.

S&F in replacement of heavy duty copper battery terminals for connection complete all as specified and directed.

S&F in replacement digital Multifunction meter indicate voltage, current , frequency etc, incl dismantling and taking down old unser meter any type complete all as specified and directed. Note: Rates of fabrication work, cutting , welding, nut, bolts etc required for fixing meter in existing panel are incl in quoted rates.

S&F in replacement contactors of capacity 63 Amps 4 Pole, rated insulation voltage 690 Volts, rated operational voltage 415 volts, rated impulse withstand voltage 8kV, frequency 50 Hz, coil voltage 240/415 Volts ,dimension as per existing incl connections complete all as specified and directed.

S&F in replacement contactors of capacity 100 Amps 4 Pole, rated insulation voltage 690 Volts, rated operational voltage 415 volts, rated impulse withstand voltage 8kV, with inbuilt auxiliary contacts , frequency 50 Hz, coil voltage 240/415 Volts , dimension as per existing incl connections complete all as specified and directed.

S&F in replacement contactors of capacity 160 Amps 4 Pole, rated insulation voltage 690 Volts, rated operational voltage 415 volts, rated impulse withstand voltage 8kV, with inbuilt auxiliary contacts , frequency 50 Hz, coil voltage 240/415 Volts , dimension as per existing incl connections complete all as specified and directed.

S&F in replacement contactors of capacity 200 Amps 4 Pole, rated insulation voltage 690 Volts, rated operational voltage 415 volts, rated impulse withstand voltage 8kV, with inbuilt auxiliary contacts , frequency 50 Hz, coil voltage 240/415 Volts , dimension as per existing incl connections complete all as specified and directed.

S&F in replacement programable digital time switch 1 channel weekly cycle,56 adj. pre-recorded prog., 2 modules with impulse and holiday function inck dismantling and taking down old unser complete all as specified and directed.

Repair and replacement of PVC insulated cable single core with copper conductor 25 Sqmm size 1100 volt grade incl lugs and complete connection all as specified and directed .

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose/soft soil and getting out for underground cable/erection of poles, stays , trench etc complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed.

Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed.

M & L earthing complete with copper earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick surrounded by char coal and salt burried directly in ground vertically in pit of depth not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 m below the normal ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected with Copper strip 20 x 3 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel and connected to earthing test point including all earth work , earth lead protection light grade GI pipe of 40 mm dia, light grade GI pipe of 20 mm dia for watering with funnel , wire mess, PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical plate No 3 of SSR Part-I including testing complete all as specified and directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator,PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test poit, and earth lead exceeding 7.5 mtr are measured and paid separately.

M&L for earthing complete with galvanized steel earth electrode plate of size 60x60x6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to GI earth lead strip of size 25X4.0 mm at two points by means of GI nuts bolts, check nuts and washers and connected to earthling test point drawn through 40 mm dia GI pipe for protection pipe incl PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I including testing and dismantling ,taking down old unser earthing complete all as specified and directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator,PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test poit, and earth lead exceeding 7.5 mtr are measured and paid separately.

M&L for earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to galvanised earth lead wire of 4.0mm dia at two points by means of GI nuts bolts, check nuts and washers and connected to earthling test point drawn through GI pipe for protection of earth lead wire incl PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I including testing and dismantling ,taking down old unser earthing complete all as specified and directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator, PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test poit, earth lead exceeding 7.5 mt are measured and paid separately.

S&F in repair of earth continuity GI wire of 4 mm dia or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed.

S&F in repair of earth continuity strip or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or fixed on wall with porcelain insulator or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip complete all as specified and directed.

Supply , Fixing & laying GI tubing light grade 15 mm dia incl fixing with pole / wall/ culvert / drainage or under ground for protection of cable or earth lead etc. complete all as specified and directed. Note: Rates for all accessories, bend, joints, clamps, nut, bolts and other items required for fixing etc shall be deemed to be included in quoted rates.

Supply , Fixing & laying GI tubing light grade 20 mm dia incl fixing with pole / wall/ culvert / drainage or under ground for protection of cable or earth lead or for watering etc for mechanical protection of cable complete all as specified and directed. Note: Rates for all accessories, bend, joints, clamps, nut, bolts and other items required for fixing etc shall be deemed to be included in quoted rates.

Supply , Fixing & laying GI tubing light grade 40 mm dia incl fixing with pole / wall/ culvert / drainage or under ground for protection of cable or earth lead etc. complete all as specified and directed. Note: Rates for all accessories, bend, joints, clamps, nut, bolts and other items required for fixing etc shall be deemed to be included in quoted rates.

Supply & fixing or laying in replacement HDPE (DWC) tubing 50 mm dia of pressure rating 6Kgf/Cm2 fixing on poles, walls under floors, road crossing laying on surface etc complete all as specified and directed. Note: Rates for all accessories, bend, joints, clamps, nut, bolts and other items required for fixing etc shall be deemed to be included in quoted rates.

Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc complete all as specified and directed.

Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 25 sqmm 4.0 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc. complete all as specified and directed. Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 16 sqmm 4.0 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc. complete all as specified and directed. Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

S&F in replacement of PVC insulated flexible unarmoured cable three core with copper conductor 2.5 Sqmm size 1100 volt grade incl lugs and complete connection all as specified and directed.

S&F in replacement air termination single pointed copper rod 12 mm dia and 300 mm long with necessary fixing arrangement on roof incl dismantling and taking down old broken air termination complete all as specified and directed.

S & F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors with rubber & bitumen washer & fixed to porcelain insulator on wall for down conductor incl dismantling and taking down old unsv strip complete all as specified and directed

S & F in replacement test point terminal block made of phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws fixed to copper strip bracket fixed to porcelain insulator in wall complete all as specified and directed

Repair and refixing of aluminium strip complete all as specified and directed. Note: Rate of misc items for refixing deemed to be incl in quoted rates.

Repair and refixing of termination rod all as per specified and directed. Note: Rate of misc items for refixing deemed to be incl in quoted rates.

Servicing, cleaning and testing of RO plant of capacity 30/50/60 LPH and make full functioning of plant to entire satisfaction of Engineer-in-Charge, complete all as specified and directed.

S&F in replacement of sediment filters for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of carbon filters for RO system of capacity 30/ 50/60 ltr/hours complete all as specified and directed.

S&F in replacement of RO membran filters assembly for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of RO DC adaptor, input voltage 220 volts, 50 Hz, output voltage 48 volts suitable for RO syatem of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of RO booster pump, 48 volt DC, nominal flow rate not less than 1.8 LPM, max. pump output pressure 110 Psi, Max inlet pressure 60 Psi suitable for fixing in RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of pre filter for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of flow switch for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of solenoid valve for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of pvc pipe for water connection suitable for RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

S&F in replacement of pvc pipe connector suitable for connection of PVC pipe of RO system of capacity 30/50/60 ltr/hours complete all as specified and directed.

M&L for overhauling , servicing , repairing of gear box of high mast light incl replacemnt of unsv parts and makie full functioning of gear box to entire satisfaction of Engineer-in-Charge, complete all as specified and directed.

M&L for overhauling , servicing , repairing of 3 phase induction motor 1.1 0 KW , 415 volt , 920 RPM, 50 Hz, single phase of high mast light incl replacemnt of unsv parts and makie full functioning of motor to entire satisfaction of Engineer-in-Charge, complete all as specified and directed.

M&L for overhauling , servicing , repairing and lubrication of OH crane of capacity 2 Ton for smooth functioning of crane to entire satisfaction of Engineer-in-Charge, complete all as specified and directed.

Comprehensive maint of Air compressor and carry out the repair and servicing incl replacement of minor sapres parts required for repair , nut, bolts, gasket, lubrication complete all as specified and directed. Note: (i) The rate for the minor spare parts required for repair is deemed to be included in quoted rates.

S&F in replacement Air filling pipe with nozzle (12 Mtr) complete all as specified and directed.

Comprehensive maint of single phase Car washing pump and carry out the repair and servicing with replacement of the following spares and refixing the same in original position and testing complete all as specified and directed. Note: (i) The rates for minor parts required for repair other than the parts consider under relevant items to be included in quoted rates. (ii) Spares required for replacement shall be measured and paid under relevant items.

Supply only Gasket

Supply only PVC hose pipe flaxible(14 RM) as per sample with adjustable water nozzle complete all as specified and directed.

M & L for De-scaling, cleaning of hot water tanks , heat collector, pipes etc with suitable agents incl mixing of anti freezing agent of solar heating system of capacity 1500 LPD complete all as specified and directed.

M & L for De-scaling, cleaning of hot water tanks , heat collector, pipes etc with suitable agents incl mixing of anti freezing agent of solar heating system of capacity 500 LPD complete all as specified and directed.

S&F in replacement electric heating element 3 kW capacity 240 volt incl complete all as specified and directed.

S & F in replacement water storage tank of 1000 Ltr capacity rotational moulded polyethylene water storage tank, 3 layered (Cylindrical / vertical with closed top), hoisted and fixed in position, connected to existing water system incl provision of float valve complete all as specified and directed.

S & F in replacement Polytuf 20 mm ball cock valves 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed with existing water connections complete all as specified and directed.

S & F fully integrated all in one Automatic light (Inbuilt Mono/poly crystalline panel SPV module 40 Wp and inbuilt LiFePO 4 battery ) Luminaire wattage 12 watt, system voltage 12 volts, Lumen per watt >125 , battery type LiFePO04 ( 12.8 V & 13/14 AH), IP66, colour temperature 6000K-6500K, incl taking down old unserviceable and complete fixing and connection complete all as per specified and directed. Make: Approved from Ministery of New and Renewable energy or certified by Govt approved lab or certified by CE.

S & F semi Integrated two in one Automatic light (Inbuilt LiFePO 4 battery ) Luminaire wattage 12 watt, system voltage 12 volts, Lumen per watt >125 , battery type LiFePO04 ( 12.8 V & 13/14 AH), IP65, colour temperature 6000K-6500K incl taking down old unserviceable and complete fixing and connection complete all as specified and directed. Make: Approved from Ministery of New and Renewable energy or Certified by govt approved lab or certified by CE.

S & F in replacement KIOSK box weather proof made out of PVC one piece mounted SMC base and door pole mounted hinged door size 333 x 233 x 200mm out side and 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp and 10 Amp MCB for controlling the street light fitting including clamps with necessary MS nuts bolts and washer complete all as directed. Make :Sinterx cat pat no GS JB 3020 or equivalent in FINOLEX/ UNIVERSAL SWITCH GEAR

Repair and replacement of AC/DC drivers upto 45-50 watt Watts for LED street light fittings incl taking down old unsv fitting and refixing after replacement of old unsv driver incl complete connections all as directed .

Repair and replacement of AC/DC drivers 60-72 Watts for LED street light fittings incl taking down old unsv fitting and refixing after replacement of old unsv driver incl complete connections complete all as specified and directed.

Repair and replacement of AC/DC drivers 90-100 Watts for LED street light fittings incl taking down old unsv fitting and refixing after replacement of old unsv driver incl complete connections complete all as specified and directed.

S&F in replacement of MCB double pole 240 volts, 50Hz , breaking capacity 10KA, B curve 6 to 32 Amps, complete all as specified and directed.

S&F in replacement of MCB four pole 415 volts, 50Hz , breaking capacity 10KA, B curve 32 Amps, complete all as specified and directed.

S & F in replacement of Automatic street light control with infrared sensor based NATRURE SWITCH and VOLTAGE MONITORING SYSTEM (VMS) Three phase load of 5 KW for automation of street lights. Nature Switch operation should be based on Natural light Lux level. Required illuminance level for switching ON is < 30 Lux and for switching OFF > 10 Lux. The sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs. VMS should have adjustable over & under Voltage trip level and protection against phase loss, Beutral loss & Phase reverse incl Power contactors (3 nos of capacity 16 amps per phase each) and incoming (3 nos of capacity 20 amps each)- outgoing MCB(3 nos of capacity 20 amps each) & main load circuit wiring (Copper) of minimum 10 sqmm. The sensor , VSM, Power contactor, MCBs incl connected items should be enclosed in a Pole/wall mountable enclosure made of rust proof, electric shock proof,termite proof and FR grade SMC junction box conforming to IP54. The circuit should also have provision for manual operation (i.e. sensor & VMS By-Pass option). Model Swadeep- 02EC5kW3P-VMS or equivqlent in Schneider/Havells/Legrand

Make (i) Nature switch: Kakatiya Energy Systems/Healer/Bajaj (ii) Power contactor- L&T / BCH / Schneider (iii) Voltage Controlling Device- L&T(GIC) or equivalent (iv) MCB-Hager/schneider/L &T /Legrand, (v) Enclosure & circuit sheet- Sintex (shock proof, rust proof, termite proof, FR rade) (vi) Circuit wiring-Polycab/Finolex Note: (i) Nut , bolts, clamp for fixing on Poles/wall are to be included in quoted rates. (ii) The sensor must have the warranty of min of defect liability period. (iii) Test certificate and warranty cirtificate must be provided by supplier. (iv) Cost of marking description on the box is incl quoted rates.

S&F in replacement of LED street light fittings of 45 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection of up to 5kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BRTFG 45W LED V2 or equivalent in Appx 'A' of tender documents.

S&F in replacement of LED street light fittings of 60-62 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection of up to 5kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BRTFG 60W LED V3 or equivalent in Appx 'A' of tender documents.

S&F in replacement of LED street light fittings of 72-75 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection of up to 5kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BRTFG 72W LED V3 or equivalent in Appx 'A' of tender documents.

S&F in replacement of LED flood light fittings of 80 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection of up to 5kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BJFL 80W LED I WW or equivalent in Appx 'A' of tender documents.

S&F in replacement of Mushroom shaped decorative LED bollard with IP 65 protection and 9 watt capacity warm white , 240 Volts AC, 50 Hz, incl make proper connection complete including PCC, cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BLBMC 9W WW LED or equivalent in Appx 'A' of tender documents.

S&F in replacement of Cylindrical shaped (FLUTE) LED bollard with opal acrylic diffuser and IP 65 protection and 9 watt capacity warm white , 240 Volts AC, 50 Hz, incl make proper connection complete includingPCC, cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BGBOL 605 9W LED or equivalent in Appx 'A' of tender documents.

S&F in replacement of Tulip shaped LED bollard with opal acrylic diffuser and IP 65 protection and 9 watt capacity warm white , 240 Volts AC, 50 Hz, incl make proper connection complete including PCC, cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BGBOM 650 9W LED or equivalent in Appx 'A' of tender documents.

S&F in replacement of Rectangular shaped victorian design (TETRIS) LED bollard with opal acrylic diffuser and IP 65 protection and 9 watt capacity warm white , 240 Volts AC, 50 Hz, incl make proper connection complete including PCC, cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BGBOS 600 9W LED or equivalent in Appx 'A' of tender documents.

S&F in replacement of Inverted Pyramid tripod type LED bollard with soft 360 light, IP 65 protection ,resistance to corrosion, better optics for uniform distribution and 10 watt capacity warm white , 240 Volts AC, 50 Hz, incl make proper connection complete including PCC, cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: CG Cat Part No: LBLS1-10-CDL or equivalent in Appx 'A' of tender documents.

S&F in replacement of LED post top in made in die-cast aluminium housing with decorative clear opal acrylic diffuser IP 65 protection, warm white , 240 Volts AC, 50 Hz, incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make: Bajaj Cat Part No: BGCT W4 LED WW or equivalent in Appx 'A' of tender documents.

S & F in replacement of street light bracket made out of GI pipe note less than 25mm bore light grade suitable for fixing LED street light approx length not less than 1.20 mtr bent to shape including new clamps made of MS flat of size 30x4 mm thick including cutting, welding drilling holes, nut, bolts washers etc including two coat of aluminium paint over one coat of red oxide primer on MS work complete all as specified and directed.

S&F in repair of earth continuity strip or main earthing lead of size 20x3 mm copper strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or fixed on wall with porcelain insulator or any other indicated situation for loop earthing etc. as required complete all as specified and directed.

M&L cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts and wasters,clamps,welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat of red oxide primer and two coats of aluminum paint incl dismantling and taking down old unserviceable complete all as specified and directed.

Babu Ram Sud and Sons

M/S kuldeep kumar khullar