PROVN OF CERTAIN SPL RAPAIR AND MINOR WORK UNDER AGE B/R-III AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 but except bricks complete all as specified & directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified & directed.

Demolition of cement concrete of ground floor and pavings not exc 15 cm in depth (below or above ground level) for.

Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match laid over & including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. Complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified and directed.

Demolition and breaking up of drain pipe salt glazed stoneware of 150mm bore set in cement mortar complete all as specified and directed.

M & L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M & L Concrete bed in cemen concrete (1:4:8 type D-2 (using 40mm crushed stone aggregate) to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 150mm dia pipe. Complete all as specified and directed.

M & L RCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in slabs/precast cover slabs for man holes set in cement mortar 1:6 including necessary form work, placing in desired placing and demolition and breaking of old cover slabs complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing withclips. Complete all as specified and directed.

All as item No 14.00 here-in-before but 6mm to 8mm dia

All as item No 14.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each. Complete all as specified & directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: The rate quoted against this items shall including supply & fixing of stainless steel 03 x butt hinges, 02 x aluminium handle, 02 x 150mm tower bolt will also included in each door

S&F Box type steel window comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc and including two coats of synthetic enamel paint over a coat of red oxide primer, 3mm thick glass panes and galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

M & L 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed.

M&L preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M&L preparation of old surface after complete removal of existing treatment by mechanical means and applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M& L preparing plastered new surfaces of ceiling and applying 2mm thick wall care putty and two coats of oil emulsion distemper on ceiling surface

All as item No. 28.00 here-in-before but one coat of oil emulsion distemper on old ceiling surface.

M & L preparation of new plastered surface of wall and applying two coats of exterior emulson paint (weather proof) using using roller over and including 2mm thick wall putty after finishing the wall surfaces complte all as specified and directed.

M&L applying two coats of exterior emulson paint on old surface (weather proof) using roller over and including 2mm thick wall putty including complete removal of existing treatment by scraping surface by mechanical means and finishing the wall surfaces complte all as specified and directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site.

All as Item No.33.00 here-in-before but 20 mm bore pipe.

S&F GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore. Complete all as specified and directed.

All as item No. 35.00 here-in-before but for 20 mm bore pipe.

S&F three layered 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks & removing complete all as specified and directed.

S&F three layered 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule. Complete all as specified and directed.

S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule. Complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe with 'S' Trap complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe with 'S' Trap complete all as specified and directed.

Supply and fixing plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fixed in repair vitreous china urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, PVC urinal Spreader fixed to water supply pipe, cp greating 125mm etc complete all as specified and directed.

Supply and fixed vitreous china urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, PVC urinal Spreader fixed to water supply pipe, cp greating 125mm etc complete all as specified and directed.

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

S&F vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

Supply and fixed in repair of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white i as approved incl ball valve float valve and handle,32 mm dia flush pipe complete all as specified and directed.

Supply and fixed PVC low level flushing cistern 10 litre capacity valveless syphonic action type white i as approved incl ball valve float valve and handle,32 mm dia flush pipe complete all as specified and directed.

S&F in repair vitereous china wash basin white Oval type size 560x470x190mm, including 15mm bore pillar tap swan neck, 32mm dia CP waste fitting and PVC waste pipe 610mm long and cp grating 125mm complete all as specified and directed.

Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repair CP brass soap dish (rectangular, with suitable perforations and moulds for soap, paste etc) complete all as specified and directed.

Supply and fix in repair PVC pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC bends 75mm bore, any radius complete all as specified & directed.

S&F Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair) complete all as specified and directed.

S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed.

Supply and fixing PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/urinals complete all as specified & directed.

Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

M&L for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each. Complete all as specified and directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fittings like lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed.

Supply and fixing made plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial veneering on both faces, the size of rail at stile as per IS: 1003 Pt-I kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing for 35mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepaired to receive glass gauge etc, (with sash bars) edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) complete all as specified and directed

Supply and fixing for stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets. Complete all as specified and directed.

S&F GI snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm GI angles weight 0.36 kg fixed all along the wall at ends and with GI main and cross tee of size 36.50 mm x 25 mm x 1.4 mm width not less than 0.24 kg per RM including GI cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including supply & fixing suitable non asbestos fibre cement boards in ceiling of size 600 mm x 600 mm complete as per approved make, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantiling 40 Sqcm and over in section in any position complete all as specified and directed.

S&F structural steel work as in roof truss/purlin/rafter/post or simillar work, made of tubular/angular(equal/unequal angles/ISMB section/plates as per site requirement) including welding, special shaped washers etc. using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240 complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, Fe 410-W (Gde-E-250) quality A without any attachment complete all as specified and directed.

M&L PCC type B1 (1:2:4) using 20 mm graded aggregate as in hold fast, filling in pressed steel chawkhat, window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.”

S&F 1mm thick mild steel plain, black sheet in wall cladding, steel gates and similior work, cut to size, holes, punched, including round headed screws, eaves boards, clout nails or rivets and fixed to wood or steel framing witn plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed

M&L for 5-6mm dia GI wire, fixed with 10mm dia round MS bar, including suitable hooking & Nut/washers at either end, fixing/grounting/inserting in wall for fixing of mosquito net complete all as specified & directed.

S&F 150mm long, extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed.

S&F 150mm long, aluminium anodised barrel tower bolts of extruded section. Complete all as specified and directed.

S&F 300mm, Mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint (by spraying) over a coat of red oxide complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L applying two coats of exterior emulson paint (weather proof) on plastered or unplastered surfaces, using roller over and including 2mm thick wall putty after preparation of new/old surface & scraping the wall surfaces complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed.

Supply and fixing vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 55 cm long between flanges.

S&F stainless steel 3mm thick soap dish/plate of size 300 x 100mm, with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush complete all as specified and directed.

M&L for anodised aluminium door(partially or fully glazed) shutter without sashbars, aluminium sections weighing 0.55Kg/m (min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable anodised fittings such as hinges, handels, sliding door bolt/mortice lock as per instruction, including anodised aluminium frame with one or more rebates 5 to 6mm thick black glass/aluminium composite panell (commercial type) sheet or aluminium grill fixed to frame complete all as specified and directed.

Supply and fixed Double action floor spring hydraulically door closer regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed.

S&F, 100mm Grease trap of Cast iron, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes complete all as specified and directed.

All as item No 105.00 here-in-before but 75mm dia bore pipe

Suply and fix 75mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply & fix 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Suply and fix 110mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply and fixing for 20 mm dia mild steel powder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends as fixed in repairs complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass, type D-2 1:4:8 using (40 mm graded stone agg) complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix),Type B1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressumm?ers, lintels over 1.5m span complete all as specified and directed

Preparation of New plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.

Preparation of New plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

S&F 15mm bore, Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

All as item No. 118.00 here-in-before but 20 mm bore pipe.

S&F, 16 mm (outer dia), 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Supply and fixing 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

Supply and fixing 15mm bore stop valve/angle valve (as per site requirement), fancy type, chromium plated, cast copper alloy, screwed down, high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil. Complete all as specified and directed.

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point, complete all as specified and directed.

M&L, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

Supply & fix 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Cutting, Screwing existing steel tubing for alterations or additions for pipe bore 40-50mm in position without taking down complete all as specified and directed.

Supply, fix 25 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / bell point controlled by one, one way switch 05 / 06 Amps.

All as item No 132.00 here-in-before but One exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as item No 132.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as item No 132.00 here-in-before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as item No 132.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply and fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

Supply and fix in repair of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

Supply and fix in repair lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fix LED lamp 9/10 watt complete all as specified and directed.

Supply and fix in repair LED Batten 20 Watt aluminium housing integtrated type complete with all accessories and fixing material complete all as specified and directed.

Supply and fix in repair LED tube light fitting 9/10 watt surface mounted,with extruded polycarbonate , integrated lamp & driver , with opal diffuser and decorative end plates.complete with acessories complete all as specified and directed.

Supply and fix in repair LED bulk head light fitting wall mounted with back lit LED 10 watt, IP-66,complete with complete all as specified and directed.

Supply and fix exhaust fan 300 mm , single phase , 50 HZ with double ball bearing heavy duty all with all including all fixing material including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 incl recolouring and nut, bolt and clamp etc required includind taking down old unserviceable from site complete all as specified and directed. Note :-Old unserviceable exhaust fan should be deposited to AGE E/M Yard under GE(S) Meerut)

Supply and fix exhaust fan 300 mm , single phase , 50 HZ with double ball bearing heavy duty all with all including all fixing material including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 incl recolouring and nut, bolt and clamp etc required complete all as specified and directed.

Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing IP-66 comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase / PVC / polycarbonate isolated body complete all as specified and directed.

Supply and fix in repair sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fix in repair sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length).

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity32 Amps to 40 Amps 10kA and making connections complete all as specified & directed.

Supply & Isolator 4 pole 'B' series 63 AMP amps capacity AC 415 V,10kA complete all as specified and directed.

Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply and fixing steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified and directed.

Supply and fixing decorative LED tube light fitting/warm as directed 1x20 watt surface mounting , intigrated with opal diffuser complete with complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 160 Amp and 12 Nos MCB'S inside of DB, including 100 Amps ,18 KA 4 pole MCCB with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed.

Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Old unserviceable fan will be deposited to AGE E/M-II (South) yard only

Taking down unsv cable of any type/size and S&F laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supply and fixing in repair LED security light fitting 1x35 Watt luminaries with die cast aluminium housing IP-66 comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 35 watt complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep 450 mm sweep heavy duty with, blades, and frame and louverscomplete all as specified and directed. Note:- Old unserviceable fan will be deposited to Yard of AGE E/M-II (S) Meerut

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department .

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Material and labour in repair for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

M & L for Aluminium strip of size 25 x 3.15 mm for earth continuity from test point to Air termination rods inter connections including brazing for joint, copper/brass nut bolts/washers with insulators for necessary fixed on wall/laid on roofs/trenches etc. Complete all as specified and directed.

Supply and fixing of Aluminium Air termination, single pointed aluminium rod 12mm dia and 300mm long a proper distance as per direction of EIC incl all cutting/welding/fixing without any other extra cost complete all as specified and directed.

Supply and fix GI tubing light grade 40 mm dia fixed with base plate on roof and fix with air termination rod at other side and grauted using nut,bolts, plate etc using welding/soldering work if required complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Material & labour for earthing complete with copper earth plate electrode 60cmx60cmx 3.15mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with copper earth plate electrode 60cmx60cmx 3.15mm by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main test point including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover. Complete all as specified and directed.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilling and screw incl 03 nos 8mm dia 25mm long hex, head screw. LED wall mounted flame proof light fitting 30 Watt, 230 V, electronic driver high transculent frosted diffuser complete with all accessories internally prewired complete all as specified and directed.

Supply / laying and fixing 80mm bore galvanised steel tubes with all fittings, light grade, complete all as specified and directed

Supply and fix LT OH lines on existing poles with ACSR conductors size 2 of 6/1x2.59 mm. Complete all as specified and directed.

Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt. Complete all as specified and directed.

Supply, laying commissioning, testing of XLPE LT cable 1100 volts grade of size 10 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty. Complete all as specified and directed.

Supply, laying commissioning, testing of XLPE LT cable 1100 volts grade of size 6 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty. Complete all as specified and directed.

Supply & fixing MCB SPN, AC, 240 volts of 40 Amps, C curve, 10 kA,. Complete all as specified and directed.

Supply and fix desert cooler electric driven single phase 230 Volt metallic body (GI) medium, capacity of water not less than 75 Ltr , 1440 RPM and power consumption not more than 240 watt, 50 Hz complete all as specified and directed .

Supply and fixing post top lanteen LED type 40 watt volts AC out door type with decorative post top for 360 degree indirect light IP 65 proction with impact and corrosion resistant complete with driver and lamp Complete all as specified and directed.

Material and labour for Cement concrete in foundation, filling and mass concrete type B2 , of ratio 1:2:4 complete all as specified and directed.

Material and labour for Cement concrete in foundation, filling and mass concrete type C2 , of ratio 1:3:6 complete all as specified and directed.