Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.4 CrAccepted-AOC | ₹18.4 Cr Quoted ₹18.5 Cr | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹19.0 CrRejected-Finance | ₹19.0 Cr | L2 | Rejected-Finance Other than L1 |
Tender Value
₹17.5 Cr
EMD Value
₹12.0 L
Closing Date
2 Aug 2023, 6:00 pmClosed
HQ,Chief Engineer Lucknow Zone, Lucknow
HQ,Chief Engineer Lucknow Zone 17, Cariappa Road Cantt,Lucknow-02
BEAUTIFICATION AND DEVELOPMENT OF AKSHAYVAT COMPLEX, PATALPURI AND SARASWATI KOOP AT OD FORT UNDER GE (E) PRAYAGRAJ
2023_MES_607419_1
CELZ/ALD/T-02 OF 2023-24
Open Tender
Civil Works
240 days
PRAYAGRAJ
Please refer tender documents
8 documents required · 8 mandatory
₹3,000
GE(E) Prayagraj
₹12.0 L
Yes
Lucknow
21 Aug 2023
1 Jul 2023
4 Aug 2023
1 Jul 2023
2 Aug 2023
21 Jul 2023
1 Jul 2023 - 7 Jul 2023
8 Jul 2023
Amount
Demolition of Dismantling in Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Dismantling fencing wire mesh, any type complete all as specified and as directed.
Dismantling cast iron work of any description complete all as specified and as directed.
Surface dressing & Site Clearance of the ground 15 cm deep complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting in out any type of soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting in out any type of soil complete all as specified and directed.
M&L PCC 1:3:6 type-C 2 (using 40 mm graded stone aggregate) as in Cement concrete as in foundations, filling and mass concrete complete all as specified annd as directed.
M&L for Reinforced cement concrete (design mix) M-25 (20 mm graded stone aggregates) as in: Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete ,complete all as specified and as directed.
M&L for Reinforced cement concrete (design mix) M-25 (20mm graded stone aggregates) in: pillars, piers, posts and struts mass concrete. upto 5th floor level Columns, complete all as specified annd as directed.
M&L Reinforced cement concrete (design mix) M-25 (20mm graded stone aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span upto 5th floor level. complete all as specified and as directed.
M&L Reinforced cement concrete (design mix) M-25 (20mm graded stone aggregates) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like upto 5th floor level complete all as specified and as directed .
S&F Formwork ( rough finished surfaces ) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
S&F Formwork to ( rough finished surfaces ) sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed
S&F Formwork to ( rough finished surfaces ) soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and as directed
S&F for Formwork to ( rough finished surfaces ) sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and as directed.
M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
M&L for TMT steel bars 5 mm to 10 mm dia. ,as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde E- 250) qualityA- complete all as specified and as directed
S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
S&F Extra only over Item 20 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified and as directed.
Providing & Installation 12mm clear toughned glass with ozone make E Series Spider glazzing and double leaf patch fitting openable door with H-Handle (18'') All the joint fill up with clear silicon fin glass will be laminate (10mm 1.52PVB +10mm) complete all as specified and as directed.
M&L Brickwork with fly ash bricks of old size , compressive strength not less than 100 Kg/Cm2 , straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed
M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces including finishing the surface fair and even ,complete all as specified and as directed
M&L for Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and as directed.
M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed
M & L for finishing of walls with textured exterior paint of approved shade : New work (Two coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified & directed.
M&L for prepration of Newly steel surface and applying two coat synthenic enamel paint over a coat redoxide, over 10cm in width or girth,not otherwise described,complete all as specified and as directed
M&L for Theme painting on boundary walls and flyover pillars with Artistic Acrylic colours including all materials, labour, T&P etc. required for proper completion of work, complete all as specified and as directed.
S&F 375mm long aluminium anodised, skeleton tower bolts with plate, staples and bolt of extruded section and fixed complete all as specified and as directed.
S&F for 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed to door etc complete all as specified and as directed.
S&F for 125 mm log aluminium handles, cast type, anodised fixed to door etc ,complete all as specified and as directed.
M&L for Anodised aluminium frame for (Power Coating minimum thickness of powder coating 50 micron) doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L for Anodised aluminium window and ventilator shutters, side hung type (Powder coating of any colour , thickness or powder coating not less than 50 micron).without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F for 5.50 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each complete all as specified and directed.
S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required , complete all as specified and as directed.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface usig Broken stone or boulders complete all as specified and as directed.
M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.
M&L for Providing and fixing red sand stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.complete all as specified and as directed.
S&F for Dholpur stone cladding (25 to 30mm thick) gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment.including 15mm thick Rendring as in backing coat 1:4 plaster, complete all as specified and as directed.
S&F 40mm thick sand stone slabs, dressed close picked on exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match including 20mm thick screeding in cement Mortar 1:6 complete all as specified and as directed.
M&L for red sand Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : complete all as specified and as directed.
Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars complete all as specified and as directed.
Extra for stone work ashlar sunk or moulded in cornices complete all as specified and as directed.
M&L for TMT steel bars 5 mm to 10 mm dia. ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
Providing & Fixing wall Mural (70mm thick Red Sand Stone) complete all as specified,shown on drawings and as directed by Engineer-in-Charge.
S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors , complete all as specified and as directed.
S&F PVC (SWR) bends any radius 110mm dia complete all as specified and as directed.
Fabrication and manufacturing of solid precast concrete element with provisions of shear keys, connecting loops, dowel tubes and proper lifting accessories for walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different concrete grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts form, table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutout/holes of required sizes for services, yard handling & stacking all complete as per IS 11447:1985 and as per approved shop drawings and design mix as per the direction of Engineer-in-Charge (Cost of reinforcement, Mechanical, Electrical and Plumbing inserts will be paid separately). Concrete grade M-30 complete all as specified and as directed.
Supplying & laying of bi-axial extruded high modulus polypropylene geogrid coforming to MORTH SPECIFICATION for base/sub-base reinforcement having minimum tensile strength 40kN/m in the longitudinal and transverse direction, with 14kN/m and 28kN/m tensile strength at 2% and 5% strain respectively in the longitudinal and transverse direction, junction efficiency not less than 95% and with 38mm X 38mm mesh opening complete all as specified and as directed.
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type SS fastner 12 mm dia ,150 to 250 mm long complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
ENTRANCE GATE Dismantling of structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.
S&F for rough fiished surfaces Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.
M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work complete all as specified and as directed.
M&L for Boring for Bored cast in situ piles 300 mm dia @ 5 metres in soil and getting out and disposal of spoil to a distance 50 metres using DMC method (Direct mud circulation) & using Reinforced cement concrete (design mix) M-25 (20mm graded stone aggregates) complete all as specified and as directed.
POLICE BOOTH ,JODHA VATIKA S&F for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough fiished surface of concrte ,complete all as specified and as directed.
S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and as directed.
M&L Brickwork with flyash bricks,(old size ,sub class -B bricks in cement mortar 1:4) straight or curved on plan to any radius in half brick thick walls, built in complete all as specified and as directed.
M&L Rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces including finishing the surface fair and even. complete all as specified and as directed.
M&L Rendering 5mm thick Cement plaster 1:4 on fair faces of Slab or concrete surfaces including finishing the surface fair and even.complete all as specified and as directed.
M&L Vitrified tiles (Dark shed ) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed 1:6 bed or bedding layer of mortar for laying floor finishes , complete all as specified and as directed.
S&F Non - skid Ceramic tiles Coloured Tile 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 15 mm thick screed bed in 1:6 for laying in floor finishes , complete all as specified and as directed.
M&L for Glazed ceramic tiles in vertical surface 350 mm x 250 mm x 7 mm/ 450 mm X 350 mm X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat in 1:4 cement sand mortar complete all as specified and as directed.
M&L for Machine cut pre-polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Screed bed or bedding layer of mortar 20 mm thick cement sand Mortar 1:6 for laying floor finishes complete all as specified and as directed.
M&L for machine cut pre polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rendering 10mm thick (1:4) on fair faces of brick work or concrete surfaces complete all as specified and as directed.
M&L for Granite tiles for 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including Screed bed or bedding layer of mortar 20 mm thick (Mortar 1:6) for laying floor finishes complete all as specified and as directed.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick of size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm , modulus of elasticity 850 N/mm 2 2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S &F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 100 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and as directed.
S&F Floor door stopper of aluminium alloy body tongue with hard drawn steel spring, fixed in door of size 140 mm long complete all as specified and directed.
M&L for Reinforced cement concrete (design mix) M-25 (20mm graded stone aggregates) walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttressescomplete all as specified and as directed.
M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and as directed.
M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges Type B0 1:2:4 (12.5mm graded stone aggregate) including necessary form work complete all as specified and as directed.
M&l Liquid water proofing compound complete all as specified and as directed.
S&F Vitreous China wash down water closet pan (pedestal pattern) 655 mm x 370 mm x 770 mm, white (excluding fixing bolts, flushing cistern and flush pipe) wash down water closet (Pedestal pattern), complete all as specified and as directed.
S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) Water closet (Squatt pattern) complete including provision of lime concrete bedding complete all as specified and as directed.
S&F PVC valveless, syphonic action type, flushing cistern (10 litre), low level, white, with inlet, ball valve, float and handle including brackets Flushing cistern and flushing pipe (exclusive of brackets). complete all as specified and as directed.
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall complete all as specified and as directed.
M&L Formwork for fair finished faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.
S&F for Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20 mm stone aggregate for 100 mm outlet dia complete all as specified and as directed.
M&L Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.
S &F PVC (SWR) pipes single socketed 75 mm dia , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S &F 110 mm outlet dia , PVC (SWR) bends any radius with access door complete all as specified and as directed.
S &F 75 mm outlet dia , PVC (SWR) bends any radius with access door complete all as specified and as directed.
S&F for 110 mm outlet dia , PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed.
S&F for 75 mm outlet dia , PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed.
S&F for 110 mm outlet dia , PVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified and as directed.
S&F for 75 mm outlet dia , PVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified and as directed.
S&F for 110 mm outlet dia , PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.
S&F for 75 mm outlet dia , PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.
S&F for 110 mm outlet dia , PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and as directed.
S&F for 75 mm outlet dia , PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and as directed.
Taking up or down 20 mm dia (inner fitting) steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 25-32 mm dia (inner fitting) steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
S&F 20 mm dia (inner fitting) tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F 25 mm dia (outer fitting)Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Cutting existing 20 mm dia (inner fitting) steel tubing for alterations or additions (Each cut measured) complete all as specified and as directed.
Cutting existing 25 to 32 mm dia (outer fitting) steel tubing for alterations or additions (Each cut measured) complete all as specified and as directed.
S &F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 32 mm nominal bore. complete all as specified and as directed.
S&F Plug type bib taps, cast iron, screwed for iron pipe and fixed 15 mm nominal bore complete all as specified and as directed.
S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 20 mm nominal bore, complete all as specified and as directed.
M&L Bottle trap of 32 mm dia PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed.
M&L 1000 litre capacity Rotational moulded polyethylene water storage tanks ISI marked two layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part complete all as specified and as directed.
Providing and fixing 600 mm x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and as directed.
S&F Ball brass valves 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F Ball brass valves 25 mm dia , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F 52mm thick PVC Partition consisting of 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes In between two MS tubes, 12mm thick both side prelam PVC plastic ply sheet and 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel.The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete all as specified and as directed.
HORTICULTURE Supplying and stacking of good earth at site including royalty charges, if any complete all as specified and directed by engineer-in charge. Note:- Earth supplied and stacked will be reduced by 20% for payment purpose.
Supplying and stacking of manure at site including royalty charges, if any complete all as specified and directed by engineer-in charge. Note:- Manure supplied and stacked will be reduced by 8% for payment purpose.
M&L for complete maintenance of 810 nos Shurbs/Herbs and 50 Nos trees including watering, cleaning, manuring, removing weeds/ bushes, making of basin at regular intervaland applying insecticides /fungicides including removing of cut/waste material outside the OD fort complete all as specified and as directed. Note:- Manure used shall be measured and paid separately under respective item.
Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) including removal of cut materials outside OD fort complete all as specified and as directed by Engineer-in-charge.
Plantation of Shrubs and Hedge at site after digging hole of dia and depth 45 CM in ordinary soil and refilling the same with the good earth mixed with manure in the ratio of 2:1 by volume (2 parts of stacked volume of earth: 1 part of stacked volume of manure), including watering , dressing and removal of rubbish and surplus earth (not in use) outside OD Fort complete all as specified and directed.
Supplying and stacking of Ficusblackii (F.vivion) (bushy) of height 150-165 cm with 8-10 branches and healthy foliage complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Gardenia jasminoides of height 45-60 cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Cestrum nocturnum (Raatki Rani) of height 60-75 cm complete all as specified and directed by engineer-in-charge.
Providing and stacking of Cycas palm of height 30-45 cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Hibiscus rosasinensis of height 45-60 cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Murraya exotica of height 45-60 cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Nyctanthesarbor-tristis (Hasingar) of ht 90-105 cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Tecomastans of height 45-60 cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Ipomoea purpurea (Morning glory) of height 30 to 45 cm complete all as specified and directed by engineer-in-charge.
M&L for anti-termite treatment by digging 6 to 7 pits of size 30 cm deep and 4 cm in dia around the tree using chemical emulsion Chlorpyriphos 20% EC in the ratio of 1% concentration at the rate of 1.5 litre per hole two or more application as required to get the trees free from termite infection complete all as specified and directed.
Plantation of Trees at site after digging hole of dia and depth 60 CM in ordinary soil and refilling the same with the good earth mixed with manure in the ratio of 2:1 by volume (2 parts of stacked volume of earth: 1 part of stacked volume of manure), including watering , dressing and removal of rubbish and surplus earth (not in use) outside OD Fort complete all as specified and directed. Note :- Good earth, manure and trees shall be measured and paid separately under respective item.
Supplying and stacking of Chinese Orange of height 120-130cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Callistemon lanceolatus of height 150-165 cm complete all as specified and directed by engineer-in-charge.
Supplying and stacking of Delonixregia (Gulmohar) of height 150-165 cm complete all as specified and directed by engineer-in-charge
Supply & installaton HU3"(2"X2)-GF+MF+DF+V2" BOM-IND WITH AUTOMATED FLUSHING complete all as specified and directed.
Supply & installaton SWING CHECK VALVE 3" complete all as specified and directed.
S&F 25 mm dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches.
S&F 32 mm dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches.
S&F 50 mm dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches.
S&F 75 mm dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches.
S&F 110 mm dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches.
Supply & installaton PE IRRI.PIPE 16/2.5/1.1-1.3MM CL-II complete roll of 400 m or part thereof in single length complete all as specified and as directed.
Supply & installaton DRIPNET PC AS 16008 2.0L/H 0.40M 500MIND complete all as specified and as directed.
Supply & installatonPP BALL VALVE 2.5"(63MM) PLAIN-IND complete all as specified and as directed.
Supply & installaton Pop Up Sprinkler for Lawn (Imported- 12Meter Range) complete all as specified and as directed.
Supply & installaton Pop Up Spray for Lawn (Imported- 3Meter Range) complete all as specified and as directed.
Supply & installatonSwing Assembly 1/2" complete all as specified and as directed.
Supply & installaton NMV PVC BALL VLV 1 UNION 2" SG ISO/D complete all as specified and as directed.
Supply & installaton NAVK 10 2" KINETIC AV PN10 BSP complete all as specified and as directed.
Supply & installaton PVC FLUSH VALVE 63MM-IND complete all as specified and as directed.
Supply & installaton RUBBER GROMMET OD DIA 16*ID 10.7 MM complete all as specified and as directed.
Supply & installaton START NIPPLE 16 MM -IND complete all as specified and as directed.
Supply & installaton REDUCER 17X16 MM BARB-IND complete all as specified and as directed.
Supply & installaton END CAP 16/17 MM- IND complete all as specified and as directed.
Supply & installaton NIPPLE 17 MM BARB - IND complete all as specified and as directed.
Supply & installatonNIPPLE 16 MM BARB- IND complete all as specified and as directed.
AKSHAYAVAT Demolition of Concrete of any description and in any position not otherwise specifically provided
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed
S &F Non - skid Ceramic tiles Coloured Tile 350x 250x / 450X 350X 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick (1:4) on fair faces of brick work or concrete surfaces
S &F glazed ceramic tiles in vertical surface 350 mm x 250 mm x 7 mm/ 450 mm X 350 mm X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar 15 mm thick (1:6) for laying floor finishes complete all as specified and as directed
S&F Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors (With mixture of white & grey cement in equal proportions & no pigment) Screed bed or bedding layer of mortar 20 mm thick (Mortar 1:6) for laying floor finishes complete all as specified and as directed.
Treating the top surface of filled earth @ 5 litres of emulsion per sqm of surface complete all as specified and directed .
Treating the soil under plinth protection @ 5litres of emulsion per sqm of surface complete all as specified and directed
JODHA VATIKA Providing & Fixing Surya Namaskar Mural (Fibre Materials) Size 6.0 feet Height all complete all as specified,shown on drawings and directed by Engineer-In-Charge.
Providing & Fixing Shri Krishan Bhagwan Ji Mural (Fibre Materials) Size 9.0 feet Height all complete all as specified ,shown on drawings and directed by Engineer-In-Charge.
M&L for walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and directed by Engineer-In-Charge.
PATALPURI TEMPLE WORK S&F for Providing and installation of DUSTBIN mobile container 120 litre (for Class A) Normal Type G.M DUSTBIN (Wheel dustbin 120 litre) complete all as specified and directed.
Supplying and laying of 20 mm dia (inner dia) , with SDR 13.5 pipes & plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
Supplying and laying of 32 mm dia (inner dia) , with SDR 13.5 pipes & plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
S&F for Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 15 mm nominal bore complete all as specified and directed.
Providing and laying name plate of patalpuri mandir complete all as specified ,shown on drawings & directed.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm , modules of elasticity 900 N/mm2 2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Ditto but of Frame size 65x 150 mm
S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed.
SARASWATI KOOP M&L for renewing tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete (Cement Concrete Tiles) complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe-410 -W ( Gde-E-250 ) Quality -A complete all as specified and directed.
M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Screed bed or bedding layer of mortar 20 mm thick (Mortar 1:6) for laying floor finishes complete all as specified and directed.
Providing and fixing wash basin including C.I. brackets, 32 mm C.P. brass waste coupling with 32mm pvc flexible pipe of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require white vitreous china wash basin size 630 mm x 450 mm with a pair of 15 mm C.P. brass pillar taps complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.
M&L for point wiring in concealed PVC conduit for One light/fan/exhaust fan point controlled by one switch complete including necessary chasing, cutting with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) multi stranded copper conductor single core and including non metallic concealed PVC conduit not less than 20 mm dia with concealed in wall and including PVC insulated and unsheathed cable 1.5 sqmm (nominal area) stranded copper conductor single core of green col our as earth wire to common earth and connected to earth dolly drawn in same concealed conduit incl making good disturbed surfaces and finished to match with existing surface complete all as specified and directed for the following:
All as per item no 177 above but for One 5 amp socket outlet point on same board complete all as specified and directed
All as per item no 177 above but for One 5 amp socket outlet point on an independent board complete all as specified and directed
Sub main wiring complete with 2 runs of 1.5 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawing into non-metallic PVC conduit not has than 20 mm dia concealed in the wall and connecting terminal ends to DB's including providing 1 run of 1.5 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 1.5 sq.mm copper conductor, one run of 1.5 sq.mm copper earth continuity conductor and one run of PVC riged conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.
Supply and fixing BLDC ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE five star rated complete all as specified and directed.
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F MCB single pole 240 volt any rating from 6 to 40 amps , with rupturing capacity 10 KA 'C' curve complete all as specified and directed.
S & F MCB SPN 240 volt any rating from 6 to 40 amps , with rupturing capacity 10 KA 'C' curve complete all as specified and directed.
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1(using 20mm graded stone aggregates) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No.3 of SSR Part-I connected to earth test point complete all as specified or indicated including testing on completion complete all as specified and directed.
Public Addressable System: Supplying, installation, testing & commissioning of Zone Controller (4 Zone) alongwith goose neck mic with seamless integration facility with main fire alarm panel for voice evacuation complete complete all as specified and directed.
Supplying, installation, testing & commissioning of 15W Floor Mounted IP 67 speaker of standard make complete all as specified and directed.
Supplying, installation, testing & commissioning of digital audio booster 240 Watt of standard make complete all as specified and directed.
Supplying, installation, testing & commissioning of Manual Alarm Call Point of standard make complete all as specified and directed.
Supplying and drawing of cable of 2 x 1.5 Sqmm FR PVC insulated copper conductor in the existing surface / recessed conduit of following pairs, cores and size including connections and interconnections etc complete all as specified and directed.
Supply and laying of 50mm Dia DWC PIPE including all necessary /fixing arrangement complete all as specified and directed.
CCTV WORK SITC of 5 MP IR Fixed Bullet Network Camera -1/2.8″ Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.002 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection, False alarm reduction through human and vehicle target classification based on deep learning UL, CE, FCC certified complete all as specified and directed.
SITC of 16 Ch Network Video Recorder- Connect Up to 64 IP Cameras, Up to 12 Megapixels Resolution, HDMI1/VGA1 and HDMI2/VGA2 outputs provided, atleast one HDMI output with 4K (3840 × 2160), atleast one VGA output with 2K (2560 × 1440) resolution, Support H.265/MJPEG, Supports N+1 hot spare system, Supports RAID0, RAID1, RAID5, RAID6 and RAID10, Supports HDD hot swap, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, 1 × eSATA interface, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 10 TB, Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0, Alarm I/O 16/4, RS-232, RS-485, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified including cost of hard disk and 900VA UPS complete all as specified and directed
SITC of 42 inch full HD professional LED display for CCTV monitoring including all necessary /fixing arrangement complete all as specified and directed.
SITC of 4 Pair Cat-6 cable in DWC Pipe 50mm Dia including all necessary /fixing arrangement complete all as specified and directed.
SITC of metal door detector suitable for stand alone operation alongwith metal sensor to be fixed as per requirement alongwih SS plateform to be fixed at site complete all as specified and directed.
Supply ,laying and testing cable XLPE Insulated ,screened ,PVC bedded, galvanized steel strip or wire armoured, electric power cables(heavy duty) 1100Volts grade with stranded aluminium conductor or size 6.0 sq mm 4 core and including rigid PVC conduit as per site requirement, flat or circular and , fixed on walls and ceilings with clamps / laid in trenches of complete all as specified and directed.
Supply , laying and testing cable XLPE Insulated ,screened ,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor or size 16 sq mm 4 core and including rigid PVC conduit as per site requirement, flat or circular and , fixed on walls and ceilings with clamps / laid in trenches complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
Supply and fixing post top lantern LED type 40watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.
Supply installation of LED lamp 10W, IP 65, mounted on stone bracket including connection with suitable size of copper wire complete all as specified and directed.
Supply installing testing & commissioning of out door type street light feeder pillar Distribution Panel of size 1000 mm x 1000 mm x 150 mm factory made cubical powder coated with fabricated 3.15 mm thick compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required with following incomming & outgoing as per detail below complete all as specified and directed. Incoming:- 100 Amp. 10 KA FP MCCB 1 No. Suitable contractor and timer for down & dusk 160 Amp. TPN Alu. Bus bar Outgoing:- 63 Amp. 10KA FP MCB 4 No. 32 Amp. 10KA FP MCB 6 No.
Supply and Installation of 3m Hybrid cast aluminium Pole duly primer coated & Polyester / Polyurethane painted alongwith foundation etc as required having top dia between 80 to 100mm and bottom dia 300 to 500mm complete all as specified and directed.
Supply,erecting, testing and commissioning of motorized High Mast Lighting System (as per particular specification attached) complete with mast shaft, head frame with pullies lantern carriage, luminaries mounting arms, U bolts. Lightning finial, stainless steel wire rope 3 nos. for lantern carriage + 2 nos for winch, transient plate, double drum winch, power tool, winch & power tool mounting bracket, foundation bolts and nuts, anchor & template top junction box , aviation light etc. & comprising of the following;- (i) High Mast shaft of 16 mtr height above the ground level , in two section, hot dip galavinised inside and out side in single dip, suitable for dynamic loading completely as per IS 875 / 1987 Part III. It shall also include accessories for high mast, including head frame, 2 point suspension system with steel wire rope (7/19 construction) double drum winch, galvanized lantern carriage arrangement suitable for upto 12 Nos of LED 200W luminaries symmetrically or unsymmetrical (as required at site), lighting finial and integral power tool for raising and lowering operation of the High Mast. (ii) Foundation bolts manufacture from special steel (Hot dipped galvanized high tensile studs ) along with nuts washers anchor plate & templates. (iii) 12 nos of luminaries LED fittings including LED flood light fittings 200W complete with control gear box. (iv) Twin dome aviation obstruction lights with LED lamp. (v) Control panel suitable for control circuit and automatic switching ON and OFF of the Mast. It shall also have suitable controls for operation of power tool. (vi) Earthing complete with connection of High Mast earth terminal. (vii) Construction of foundation for high mast shall be as per drawing provided by manufacturer using PCC of grade 1:2:4 type B-1 (using 20mm graded stone aggregate) complete as per manufacturer’s recommendations. (viii) Power tool for electrical operation for raising and lowering of lantern cartage, motor capacity not less then 1.0 HP. (ix) Erection of the high mast with the help of suitable equipments and wiring of luminaries complete. (x) PCC Foundation complete for suitable control panel in cement motor 1:3:6
Notes for Item No 207 contd... :- (A) High Mast shaft of 16 mtr shall be continuously tapered, polygonal cross section of at least 20 sides with a good and pleasing appearance. (B) High mast shaft is fabricated from high tensile steel plates confirming to BS EN 10025 or equivalent having minimum yield strength of 355 N/mm formed in polygonal shape and fillet welded longitudinally confirming to relevant IS (C)' the mast shall be provided with fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange shall be fully developed to the strength of the entire section. The base flange shall be provided with supplementary gussets between bolt holes to eliminate helical stress concentration. (D) An adequate vandal and weather proof door with provision to padlock shall be provided at the base of the mast to have clear access of base compartment components such as motor, winch , cable, wire rope, plug and socket, terminations etc. the door shall be designed and reinforced with adequate steel section so that shaft strength at base is not compromised. (E) For raising and lowering (R & L) fully loaded luminaries carriage an arrangement comprising of winch, head arrangement and stainless steel wire ropes complete with connected accessories shall be provided. (i) Winch shall be designed for easy installation and removal from the mast door. Winch shall be completely self sustaining without the need of any break/spring/clutch, self lubricating by means of oil bath, worn gear driven, grooved drums for tidy and smooth rope lay. termination arrangement of rope shall not distort the rope. (ii) Head arrangement shall be complete with cast aluminum pulley with bush bearing and stainless steel spindle provided with guides, separator and adjusters to prevent ropes and cable leaving their respective pulley grooves. Pulley assembly shall be housed in a chassis integral with a sleeve which slips over the top of the mast and is secured axially and azimuth. Complete fabricated assembly and canopy covering the pulley assembly is hot dip galvanized. (iii) Stainless steel wire ropes in grade 304 or 316 in flexible 7/19 construction of various diameters shall have factor of safety more than 5.
Notes for Item No 207 :- (F) The power tool for winch operation shall be integral/ external type suitable for handling the total head load. It shall have a mechanical torque limiter for safety of equipments. it shall also have a provision to lower the luminaries carriage manually by handle. (G) Luminaries carriage shall be constructed from durable round steel tube for aerodynamic effect and it shall have provision for mounting 18 light fittings. Provision of mounting fittings and control gear shall be designed in such away that it does not offer eccentric load and offer least resistance to wind. (H) Motorized High Mast Lighting Systems shall be got installed, commissioned and tested by only any one of the manufacturer namely: - Bajaj / Crompton Greaves / Philips with their items/products/plants/systems. No cannibalizing of makes shall be permitted. (I) 415V, 3 phase electric supply will be terminated at one point in the control panel through UG cables near mast which will be measured and paid separately. Complete wiring and cabling beyond this point shall be part of item no. 1 only. (J) Each high mast shall be provided with lightning protection system complete with earthing and rate shall be included in the item no-1.
Earth work in all kind of soil in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead exc 1.50 Km and nexc 5.00 Km and lift upto 1.5m, complete all as specified and directed.
Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
Supply and fixing of MS bracket made of angle iron of size 40 mm x 40 mm x 6 mm and 1.5 metre long ,bend to shape ,duly painted with black enamel paint and including suitable size of fastners for fixing of flood light fitting on wall /bracket at required height complete all as specified and directed.
CONSERVATION WORKS (a) SITE CLEARANCE AND DISMANTLING WORK Clearance of Debris around the heritage building by excavation n exc 1.5 mtr depth carefully without damaging the buried arcitectural parts of the building and collect all the intact parts at proper place for re-use at the time of restoration work complete all as specified and directed by Engineer -in Charge. .
Clearing jungle including uprooting of rank vegetation , grass brush wood , trees and sapling of girth up to 30 Cm measured at 1.0 metre above ground level and removal of rubbish up to a distance of 50 metre out side the periphery of the area cleared complete all as specified and directed.
De- vegetation from monument by removing bushes ,trees including complete uprooting from the wall & roof/ structure carefully including suitable chemical treatment to roots to avoid further growth including disposal of rubbish within 250 metre complete all as specified and directed.
Taking out cracked and decayed veenars stone very very carefully includding stacking of dismantled material away from site complete all as specified and directed.
Taking out decayed and buldged R.R masonry including stacking of serviceable items and removal of ruubbish material from site to a lead of exc 1.5 KM but nexc 5 KM complete all as specified and directed.
(b) STABILIZING THE FOUNDATION AND EARTH WORK Scientific Excavation over area ( exceeding 30 cm in depth ,1.50 in width as well as 10 Sqm on plan ) up to 2.0 mtr depth around heritage structure without damaging the burried architectural part of the building including screening , collecting and depositing the usable objects / articles at the specified place including getting out the excavated soil and disposal of the source in the authoised dumping ground as per consultation of the conservation Architect complete all as specified and directed by Engineer -in Charge.
M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in lime mortar 1:2 complete all as specified and directed by Engineer-in-Charge.
M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in lime mortar 1:2 (except stone)complete all as specified and directed by Engineer-in-Charge.Note:- Material obtained from ser item No 217 shall be used.
CHAPPAI OF THE MASONRY WALL IN FOUNDATION : Chhapai 20 mm thick in 1:1:1 (1 Lime putty: 1 Surkhi:1Fine sand) on the masonry of the foundation and filling the core masonry voids very very carefully and pushing the mortar in joints complete all as specified and directed.
PROVISION OF BUTTRESS OR BREAST WALL : Random rubble /coarse rubble masonry with hard stones in foundation and plinth including levelling up with lime concrete using 40mm stone aggregate up to plinth level with lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) NOTE: 1 metre wide wall after every 3 metre complete as per direction of the Engineer -in Charge.
BASE OF BUTTRESS WALL :Providing and laying lime concrete in foundation, footings, bases of columns etc. Of specified grade excluding cost of cantering and shuttering with stone aggregate 40mm nominal size and 40% mortar comprising of (1 lime putty : 1 surkhi : 1 coarse sand) complete all as specified and directed.
BLANK
(c) STONE WORK Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height, backing filled with grout of average 12 mm thick lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) including pointing in lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) with an admixture of pigment matching the stone shade : (To be secured to be backing and the sides by means of cramps and pins which shall be paid for separately):VENEER FASCIA STONE SLABS : 100mm thick complete as per direction of the Engineer -in Charge.
Providing and fixing horizontal chajja of stone 40mm thick and upto 80 cm projection in lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand), including pointing in lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) with an admixture of pigment matching the stone shade: Red sand stone complete as per direction of the Engineer -in Charge.
Providing and fixing red sand stone brackets 55 cm x 22.5 cm x 45 cm sunk and moulded including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long and dowel bars 7.5 cm long 6mm dia as per design complete as per direction of the Engineer -in Charge.
Providing and fixing red sand stone work in plain fine dressed in string coarse as Chaukhat, Slab, Dab & quid set in composite lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) mixed with composite materials and include taking out old decayed and broken red sand stone by chiselling out bit by bit very carefully without disturbing to the adjoining structures complete all as specified and directed.
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand), including making the necessary chases in stone and holes in walls wherever required complete all as specified and directed.
Recessed Pointing with 1:1:1 ratio composite lime mortar (1 lime : 1 coarse sand : 1 surkhi) mixed with colour pigment including racking out joints etc. and supply of all materials labour T&P etc. required for proper completion of work complete all as specified and directed.
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone well lining in lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand), including making the necessary chases complete all as specified and directed.
Providing and fixing stone dowels 10 cm x 5 cm x 2.50 cm cut to double wedge shape as per design in lime mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand), including making the necessary chases complete all as specified and directed.
Providing and fixing stone jali 40 mm thick throughout in lime mortar (1 lime : 1 surkhi : 1 coarse sand), including pointing in lime mortar 1:2 (1 lime : 1 surkhi : 1 coarse sand) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red / or matching colour of the sand stone complete all as specified and directed.
(d) RESTORATION OF BALCONIES Providing new /restoration of decorative sandstone columns as per the original details found on site of size around 2.1 to 2.5 metres in height & (square/ rectangular upto 200 mm x 400mm ). The damaged portions of the original column to be carefully dismantled without damaging the adjacent areas, & replacing the same with new detail of the same size & design. Sample of the terra cotta column to be shown to the Engineer in charge for approvals before procuring & fixing the same on site. Item to include all necessary anchoring details, scaffolding if required etc. complete. Mode of Measurement: Item to be paid each restored/new column. complete all as specified and directed.
Restoration & Retrofitting of Broken Stone slab or piece without removing the stone from its original place and realign the cracked & disturbed stone with the help of manual or mechanical jacking and support on both side of the crack up to 1 meter or as per the site condition. The crack stone should be carefully realigned by expert stone craftsmen considering its structural loading and place of installation within the structure and without damaging the adjacent areas. The stone crack further stitched by SS rod/clamp by cutting the groove on both side of the crack and after stitching finishing the groove by filling it matching stone dust and adhesive. The stone crack portion to be shown to the Architect/Engineer in charge for approvals before executing the same on site and should be completed in all respect as specified and directed. Note:- Item to be paid for the length of clamp stitching groove and Cost of SS clamp to be paid in respective item.
(e) PLINTH PROTECTION Providing and laying lime concrete in foundation, footings, bases of columns etc.of specified grade excluding cost of centering and shuttering.With brick aggregate 20mm nominal size and 40% mortar comprising of (1 lime putty : 1 surkhi: 1 coarse sand) complete all as specified and directed.
Providing and fixing Red sand stone flooring over 20mm (average) thick base of combination mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand), including pointing with combination mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) 50 mm thick Red sand stone complete all as specified and directed.
(f) FORM WORK AND SCAFFOLDING Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, upto 25 meter height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 meter center to center, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis., M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen, etc., complete as per directions and approval of Engineer-in-charge. Note:1. The elevational area of the scaffolding shall be measured for payment purpose. 2. The payment will be made once only for execution of all items for such works. 3. This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done
COPING : Providing and laying 50 mm thick lime concrete coping on parapets/ kanguras and on top of walls in lime mortar 1:1:1 (1 lime: 1 surkhi: 1 coarse sand) mixed with 40% brick jeera upto floor five level excluding cost of centering and shuttering complete all as specified and directed.
(g) ORNAMENTAL STONE CORNICES : Removal & fixing of stone base moulded as per existing design with fine finishing fixing in grinded lime mortar (1:2) i/c all lead a lift complete in all respect as specified and directed.- Extra for carving (Pan Patti) 100 mm thick to 150 mm thick NOTES: 40% of decorative surfaces in sandstone (250 mm along parapet and 150 mm at sill level)
Providing second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & lengthcomplete all as specified and directed. (Note: Hold fast lugs or dash fastener shall be paid for separately).
Providing and fixing double leaf door or wooden shutters made of M.P teak wood grade Ist as per traditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50 mm and 35 mm,including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect as specified and directed.
Providing and fixing double leaf Window wooden shutters made of Ist grade wood as per traditional design (Deshi pattern) planks thickness 25mm and width of Binies, Andheri 35mm and 25mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect as specified and directed : Sheesham wood grade Ist. M.P teak wood grade Ist
Returning filling in, including spreading levelling watering and well ramming in layer not exc 25 cm in any type of soil complete all as specified and directed .
Removing excavated soil to a distance exc 1.5 Km but not exceeding 5.00 Km and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square meter of vertical surface complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil including bottom surface to required level or slope for laying of cable etc. Complete all as specified and directed.
M&L sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches and consolidated complete all as specified and directed. NOTE : Punned thickness 18 cm only shall be considered for payment.
Supplying and laying precast concrete cable cover ISI marked, class LV, type 1 flat with peak, size 250mm x 150mmx 40mm complete all as specified and directed.
Supply & fix sheet metal enclosure MCB distribution board single pole & neutral 240 volts 4 way, with IP-43 IK-09 protection double door complete with appropriate size bus bar 63A rated and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
One 15 Amp socket outlet on Independant board but with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) multi stranded copper conductor single core including PVC insulated 2.5 sq mm stranded copper conductor green colour as earth wire complete all as specified and directed
S&F Modular switch, single pole one way 6 Amps 240 Volt capacity flush type complete all as specified and directed
S&F Modular switch, single pole one way 15 Amps 240 Volt capacity flush type complete all as specified and directed
S&F Modular socket 6A - 2/3 pin combined 2 module , 240 Volt capacity flush type complete all as specified and directed
S&F Modular 3 pin 15 Amps socket outlet flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed
M&L ceiling rose three terminals/PVC/polycarbonate,isolated body on PVC board complete all as specified and directed
S&F White cover plate with frame, 2 module all as specified and directed.
S&F White cover plate with frame, 4 module all as specified and directed.
S&F White cover plate with frame, 6 module all as specified and directed.
S&F Modular metal flush box, 2 module all as specified and directed.
S&F Modular metal flush box, 4 module all as specified and directed.
S&F Modular metal flush box, 6 module all as specified and directed.
Supply , laying ,jointing and testing 3.5 core 70 sqmm XLPE cable insulated ,screened ,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ,fixed on walls and ceilings with clamps / laid in trenches complete all as specified and directed.
Supply and installation of water cooler fully stainless steel body with tank and single tap having storage capacity minimum 120 litres and nominal cooling capacity 60 litres per hours BEE 5 star rated and with inbuilt stablizer complete all as specified and directed.
M/s Highway Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid