Furniture Work at Disaster AND Control Room First Floor GSouth Ward Administrative Bldg

Civil work

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead

Supply and installation of Demountable Modular partition doubleskin solid wall partition, 75 mm thick, comprising of aluminium profile sections

Providing and fixing superior quality factory made phenol bonded solid core single leaf flush commercial door shutter

Providing &fixing ply board paneling to existing column by using 37x25mm thick approved quality seasoned T.W.frame covered with 12mmthick marine ply .Paneling up to 900mm from FFL is finished with 3mm veneer & melamine polish .The edges of coloumn are finished withdecorative 75x25mm thick approved quality T.W. battans. The coloumnsurface from 900mm level upto false ceiling should be finished with 12.5 thick Gypsum board with S.S 316 grade band of 16 guage as perArchitects detailed drg. & design and as directed. The coloumn also tohave 100mm wide decorative skirting using 25mm thk.approvedT.W. planks polished with melamine of approved tint.(Basic Veneer RateRs.75/-per sft)

Fire rated door

FRP door frames

FRP flush door shutters

Providing and supplying corner table of required size with top made of 8mm thick bevelled glass and under structure made of 18mm thick Marine ply (IS 710 : 2010) with all exposed edge are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent)for better impact resistance etc. complete. Nylon button stopperto hold glass top in position, Nylon bushers etc. complete

Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion madewith foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and coveredwith foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc.complete.

Providing and fixing on site VENEER FINISH WALL PANELING made by using approved quality seasoned T.W. framing of 38 x 25 mm at approximately600 x 450 mm center to center or as per site conditions and covered by12 mm thick marine ply generally confirming to I.S.303 /I.S.710-1980 finished with 3 mm thick group match veneer of approvedquality with groove pattern including all necessary end mouldings, moulding pattern, and melamine polish. Antitermite treatment toplywood and woodwork etc.including all leads & lifts complete as perArchitects detailed drg. & design and as instructed by The Engineer In Charge (Basic Veneer Rate Rs.75/-per sft)

Providing and fixing of Modular table with fixed pedestal having 2 book drawers and 1 file drawer. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces.

High back chair

Providing and supplying center pivot, revolving, Mid back chair Depth-45cm, width-50cm, height- 105cm to 115cm & seat height- 45cm to 55cm. (+/- 2cm ) with five legged metal / moulded nylon base with push back arrangement. Chairs shall have high density moulded, 360 revolving on suitable base, gas lift , heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge.

Providing and supplying Modular CUPBOARD made up of required size. Top made of 25mm Marine ply (IS 710 : 2010), having post formed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces etc. complete. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins etc. complete. Storage Back made of 9mm thick Marine ply (IS 710 : 2010) etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with inserts etc. complete. Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing, suitable locking provision etc. complete.