REPAIRS TO INTERNAL WATER SUPPLY, JOINERY WITH CONNECTED ITEMS AND CLEANING OF OHT IN DOMESTIC AREA UNDER GE AF UTARLAI

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sqm complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm complete all as specified and directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed

All as per item No 03 above but exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening complete all as specified.

S&F factory made for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,suppling and fixing in opening as per specification & drawing complete all as specified and directed.

S&F Fatory made solid panel PVC door shutter, 30mm thick(stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 35mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S&F factory made 35mm thick 2nd class Hard wood (Hollock) Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.

S&F 2nd class HW 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed

S & F for Framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

S&F MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed.

S & F 100 mm long medium weight, stainless steel Butt hinges complete all as specified and directed.

S & F 100 mm long medium weight, mild steel Butt hinges complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paints over one coat of pink primer over 10 cm width or girth complete all as specified and directed.

M&L preparation of new steel surfaces and two coats of synthetic enamel paint over a coat of red oxide primer of any description,over 10cm in width or girth, not otherwise described complete all as specified and directed.

S & F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Hacking out old broken glass any thickness size, quality or description from wooden frame/metal frame glazed with puty or fixed with beads complete all as specified and directed..

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F sheet glass 3mm thick ground or obscured or frosted or pin headed type , on one side & glazing with oil putty in square/ rectangular n.exc 0.5 Sqm in each pane complete all as specified.

M&L for Welding in repairs n.exc 6mm thick metal and n. exc 2.50cm in length to steel windows and doors of any nature and in any position complete all as specified and as directed.

Repairing, resecuring, easing, adjusting shutters of any description exc 1 sqm but not exc 2 Sqm each without taking down including necessary repairing old iron mongry, if required compete all as specified and directed.

S & F pressed steel door frame of size 125 x 60 mm with lugs hinges, lock strike plate etc (thickness of sheet shall be 1.25mm) and with & including making good the disturb surface of wall upto satisfaction of Engr-in-charge complete all as specified and directed.

S&F 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in kitchen cupbords, modular kitchen drawer and almirah shutters or other placed as specified and directed by Engr-in-charge.

S & F factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement etc complete, one shutter with glazing bars for glass panes and other shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC and making good the disturb surfaces upto satisfaction of Engr-in-charge complete all as specified and shown on drawings drg No CEAA/TD/120 R dated 06 June 2002 sheet no 1/4 to 4/4. Note:-(i) PCC 1:3:6 type C-1 using 20mm graded stone aggregate for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.

S & F factory made for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc) including all accessories and makinggood the disturb surfaces upto satisfaction of Engr-in-charge complete all as specified and shown on drawings drg No CEAA/TD/120 R dated 06 June 2002 sheet no 1/4 to 4/4. Note:-(i) PCC 1:3:6 type C-1 using 20mm graded stone aggregate for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc and similar work conforming to Fe-290, Gde -E-165 complete all as specified.

S&F anodized aluminium brown/white colour door made of anodized aluminum frame size 101x44x2mm thick and anodized aluminium shutters having bottom rail of size 114x44x2mm thick, top rail 83x44x2mm thick, middle rail 85x44x2mm thick with two numbers of disc/D type handle in each shutter, 200mm size aluminium tower bolts 02 Nos brass lock 04 levers and key, floor door spring and hydraulically regulated door closer glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading compete all as directed.

S&F three track aluminium powder coated sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm thick ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm thick and glazing with 5 mm thick Transparency glass of poly carbon including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.

S&F fixed type powder coated aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 100x44.45x1.5mm thick etc in frame complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F in repairs for 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F in repairs for 20-25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F in repairs IInd class hard wood (teak) beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads from site complete all as specified.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps when open 40 mm complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified.

S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified.

S&F in repairs magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm complete all as specified.

S&F in repairs aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S & F in repairs plain aluminium door strip with bush and rubber gasket suitable for wooden doors to cover gap between door and floor etc complete all as specified and directed by Engr-inCharge. Note:- Thickness of plain aluminium sheet shall be 0.56mm and width of aluminium sheet shall be equal to width of bottom rail of door.

S & F stainless steel telescopic ball bearing channel for modular kitchen/drawer in kitchen including repair to modular kitchen drawer complete all as specified and directed. Note : sample of stainless steel telescopic channel shall be decided by Engineer-In-Charge.

S & F in repair 100 mm aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and type B-21all as spd and dircted.

S & F in repairs 100mm long mild steel butt hinges "medium weight" cold rolled mild steel complete all as specified.

S & F in repairs 75mm long mild steel butt hinges "medium weight" cold rolled mild steel complete all as specified.

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 150 mm long complete all as specified.

S&F in repair MS pressed handle,oval type ,stove enamelled black size 150mm, all as specified

S&F in repairs aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S&F in repairs MS barrel tower bolts stove enammelled black with bright bolt, 150mm length complete all as specified and directed.

S&F in repairs extruded aluminium alloy ,anodised ,sliding door bolt 300mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repairs 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F in repairs Aluminium hasp and staple 100 mm size safety type aluminium with mild steel hinge pin including bolt to hinge plate and fixed with serews complete all as specified and directed

S&F in repairs kitchen plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 750mm X 600X250mm and assembled with using brass nuts, bolts and washers complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

M&L glazed ceramic coloured tiles in vertical surfaces 350x250x7/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, shade of tiles laid and including 10 mm thick screed plaster in CM 1:6 finished even & fair complete all as specified.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over & including 15mm thick screed bed in CM 1:4 complete all as specified & directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match shade of tiles over 15mm thick screed bed in CM 1:6 complete all as specified.

M & L for light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Taking up or down steel water tubing of 15 mm bore and connections, including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down steel water tubing of 20 mm bore and connections, including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down steel water tubing of 25 mm bore and connections, including cleaning for refixing or removing from site complete all as specified and directed.

S&F steel water tubing medium grade galvanized of 15 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors complete all as specified and directed.

S&F steel water tubing medium grade galvanized of 20 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors complete all as specified and directed.

S&F steel water tubing medium grade galvanized of 25 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors complete all as specified and directed.

Refixing of steel tubing 15mm bore including connections in new or old position including necessary cutting threading with necessary fittings like tees,elbows,sockets,reducers,bends etc complete all as specified and directed.

All as per Item No 73 above but 20mm bore

All as per Item No 73 above but 25mm bore

Cutting existing steel tubing 15mm bore for alterations or additions (Each cut measured ) incl threading of pipe complete all as specified and directed.

Cutting existing steel tubing 20mm bore for alterations or additions (Each cut measured ) incl threading of pipe complete all as specified and directed.

Cutting existing steel tubing 25mm bore for alterations or additions (Each cut measured ) incl threading of pipe complete all as specified and directed.

M & L for Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type chromium plated stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type CP stop valves with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore dia Chroium Plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair chromium plated brass shower rose, 125 mm size with or without swivel joints long chromium plated arm including fixing to steel pipe or union 15mm bore complete all as specified and directed.

Dismantling of cast iron or RCC drain pipe of 100 mm bore, set in cement mortar complete all as specified and directed

S&F 100 mm bore cast iron, sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed on wall complete all as specified and directed.

Dismantling of cast iron or RCC drain pipe of 75 mm bore, set in cement mortar complete all as specified and directed.

S&F 75 mm bore cast iron, sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed on wall complete all as specified and directed..

S&F 100 mm bore CI bend (any radius) with oval access door, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75 mm bore CI bend (any radius) with oval access door, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F stack clamp out of 50 mm by 5 mm flat iron and 16mm dia round iron stays suitable for 100 mm bore CI pipe Including necessary nut , bolts & washer and securing ends of stays to wall or roof complete all as specified and directed.

S&F stack clamp out of 50 mm by 5 mm flat iron and 16mm dia round iron stays suitable for 75 mm bore CI pipe Including necessary nut , bolts & washer and securing ends of stays to wall or roof complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC(SWR) bends 110 mm bore of any radius complete all as specified and directed.

S&F in repairs wash hand basin vitreous china wash basin white flat back size 550x400 including supplied and fixed angle iron brakets errecting stand and 15mm bore CP Piller tap fancy type 1 No,32mm PTMT waste coupling& pvc waste pipe 32 mm dia and pvc 15mm 450mm long connection compleete all as specified.

S & F in repairs vitreous china (water closet) squatting pan, orissa pattern, size 580 x 440 mm, white, with CI 100mm dia P or S trap front or back inlet and integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S & F in repairs 10 ltrs cap. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32mm flush pipe of polythene low or high density (including dismantling of half turn valve 32mm of any description if reqd) complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan pedestal pattern(EWC), white incl necessary fixing arrangments (excluding fixing bolts, flushing cistern and flush pipe) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device icluding jet spray complete all as specified and directed..

S & F in repair rotational moulded polyethylene double layered ISI marked water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position including taking down of ball valve complete all as specified and directed.

S & F in repair rotational moulded polyethylene double layered ISI marked water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including taking down of ball valve complete all as specified and directed.

S&F in repair 15 mm bore brass chromium plated wall mixer for mixing hot and cold water along with CP brass caps screwed for fiixing complete all as specified and directed.

S&F in repairs 15mm bore wall mixer, mixing for cold and hot water brass chromium plated with telephonic shower arrangements, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair 15 mm bore ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair fancy type long shank pillar tap of 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore chromium plated wash basin mixture fancy type, with capstan heads, chromium plated, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm iron pipe and fixed comple all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm bore and 600mm length with PTMT nuts on both ends complete all as spfd and directed.

Cleaning and removing all scale and dirt etc of storage water tanks of capacity exc 250 ltrs but n exc 500 ltrs including cleaning of mouths of circulating pipes by applying bleaching powder 5kg and brushing with wire brushes taking out all scales etc cleaning of tank with fresh water, flushing out disinfecting of tank with potassium permaganate 2% solution till stored in tank become clear including writing date of cleaning in DD-MM-YY Format in block letters all as specified and as directed

All as Item No 108 above but tank of capacity exc 500ltrs but nexc 1000ltrs

S & F in repairs bath PVC cabinet mirror of size 350X450mm complete all as specified and directed by Engr-in-Charge. make : prayag/polytuf/shakti

S&F in repairs straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge. .

S&F in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in repairs 32 mm bore PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as specified and directed..

S&F in repairs 32 mm outlet dia waste fittings, brass, chromium plated for wash hand basin/ stainless steel sink etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed to waste pipe complete all as specified and directed.

S&F in repairs plastic sheet covers for water closet, black,closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level/ high level cistern for IWC, EWC and anlo-Indian water closet complete all specified and directed.

S&F in repairs providing PVC flush Internal kit for 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle complete all as specified and directed

S&F in repairs cast iron floor trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

S& F in repairs providing brass jumper valve and repairing to leakage brass bib taps/stop cock cast copper alloy with crutch or butterfly handle with for 15mm or 20mm bore bib taps/ stop cock complete all as specified and directed.

S& F in repair providing brass Spindle face and repairing to leakage brass chromium plated pillar taps, bib taps , wall mixer, WHB mixer with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut capstan head for 15mm bore pillar taps or bib taps, wall mixture, WHB mixture etc complete all as specified and directed. Note:- sample as approved by Engineer-In-Charge

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 25 mm bore complete all as specified and directed.

S&F in repairs 40 mm bore half turn flushing stop valve including cutting, threading of old GI pipe and fixing with necessary fittings like GI union, Socket,Nipples complete all as specified and directed.

S&F in repair grating dome 125 mm dia of stainless steel with or without hole complete all as specified and directed.

S & F in repair, 15 mm bore Bip tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/) complete all as specified and directed.

S&F CP toilet paper holder fixed on wall with PVC washers and dash fastners complete all as specified.

S&F in repairs kitchen sink with drainage board made of stainless sink steel 1mm thick kitchen with plugs, washers and waste pipe , waste coupling, cantilevers brackets, connecting union overall size 915x460mm bowl size 410x330x160mm complete all as specified

S&F in repairs Mild Steel cantilever brackets for stainless steel sink / wash hand basin including embeded in wall by drilling and making good with cement mortar/ PCC 1:2:4 type B1 20mm graded stone aggregate complete all as specified and directed. Note:- Size of contilever braskets shall be as per existing size.

S&F in repairs vitreous China bowl urinal flat back, minimum size 465 x 355 x 265/430 x 370 x340 mm ,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F in repairs 15mm bore stainless steel chromium plated urinal spreader with pvc connection complete all as speicfied and directed.

S&F in repairs 15mm bore stainless steel CP Health faucet of standared quality and make with high denesity chromium plated flexible pipe of minimum length 1.50 mtr complete all as specified and directed.

S&F in repair 15mm bore two ways brass chromium plated angle cock cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body complete all as specified and directed.

S&F in repair PVC cover (lid) for PVC water tank for necessary locking arangments for 500 & 1000 ltr capacity water tanks complete all as specified and directed.

S&F in repairs 15 mm bore stainless steel Chromium plated jet spray with 1.0 mtr long PVC pipe and CP connector complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work/ concrete surfaces in CM(1:4) finished even and smooth with out using extra cement complete all as specified.

M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 on ceiling or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge.

M&L for rendering 15mm thick on fair faces of concrete surfaces, stone masonry or brickwork in cement mortar 1:6 on wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M/s Malinath Electricals

m/s sai construction company,bijarar