Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.8 L+₹12.0 L (52.8%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L2 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 3 | L3₹34.8 L+₹12.0 L (52.8%)Rejected-Finance | L3 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 4 | L4₹36.7 L+₹13.9 L (61.1%)Rejected-Finance | L4 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 5 | Rejected-Technical | - | Rejected-Technical NO REQUISITE DOCUMENTS FOUNDS ATTACHED |
| Sl No | Description | Qty | Unit | M/S PARSHOTAM KUMAR GUPTA L4 | KRISHNA ENGINEERING ENTERPRISES L3 | NATIONAL TRADING COMPANY L2 | narayan construction L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Cleaning of blockage of Indian / european type WC up to first manhole and making the drain pipe of any dia fully functional by flushing with water to entire satisfaction of Engr-in-Charge including disposal of sludge outside the periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits complete all as specified and directed.
Note:- Unit rate quoted by tenderer shall include clearing blockage, taking out sludge(liquid/semi liquid/solid ) , excavation of borrow pits for dumping sludge ,removing including loading/unloading and transportation etc. | 560 | Each Job | 20 ₹11,200 Lowest | 20 ₹11,200 Lowest | 20 ₹11,200 Lowest | 100 ₹56,000 |
| 2.00 | Cleaning of blockage of Floor/Nahni/vermin trap of Kitchen/Bathroom/basin/sink/urinal etc upto & including gully trap by using hand pump with bucket or manually by rodding till clear flow of water is observed and removing the deposited sludge/solid/liquid material outside MD land, complete all as specified. | 320 | Each Job | 100 ₹32,000 Lowest | 100 ₹32,000 Lowest | 100 ₹32,000 Lowest | 100 ₹32,000 Lowest |
| 3.00 | Cleaning of blockage of under ground sewer lines of any dia of pipe including manholes, gully traps etc. by means of cleaning by roding from manholes to manholes / inspection chamber to manholes / gully trap to inspection chamber and flushing after cleaning, taking out sludge collected in manholes, removing & depositing the same outside the periphery of defence land in the pit at a minimum distance of 50 m from nearby living accn and covering the sludge in pit with earth and finally spraying unslaked lime, dry, around the manholes and cover the pit, complete all as specified and directed.
Note:-Cost of Taking out sludge, transporting of sludge out side the defence land, earth work & deposition in the pit with & including removing of surbs, grass, small roots etc around manhole, inspection chamber etc where required is deemed to be included in the unit rate to be quoted by tenderer. | 850 | RM | 20 ₹17,000 Lowest | 20 ₹17,000 Lowest | 20 ₹17,000 Lowest | 50 ₹42,500 |
| 4.00 | Cleaning of blockage of under ground sewer lines of any dia of pipe by breaking / puncturing of pipe line including excavation in type of soil to depth upto 3mtr deep, removing the blockage and making good the pipe line bedding, relaying of pipe and making good the earth excavated incl redressing complete all as specified and directed. | 40 | Each Job | 300 ₹12,000 | 300 ₹12,000 | 300 ₹12,000 | 100 ₹4,000 Lowest |
| 5.00 | Opening of cover (of any description and size) of septic tanks and soakage well/ pits, desludging/ dewatering of septic tanks and soakage well/pits of any size and depth by manually operated machine (where approach for vehicle is not feasible) making it fully functional and removing sludge outside the periphery of defence land at his own arrangement at a minimum distance of 50 m from nearby living accn and burring in excavated pits including spraying of lime over returning filling of sand and covering the same including refixing covers after cleaning complete all as specified and all as directed by Engr-in-Charge.
Note: Unit rate quoted by tenderer shall include taking out sludge from septic tank and soakage well/pits in ground with pit by excavation of borrow pits for dumping sludge, removing including loading/unloading and transportation etc. | 300 | Cum | 100 ₹30,000 Lowest | 100 ₹30,000 Lowest | 100 ₹30,000 Lowest | 300 ₹90,000 |
| 6.00 | Opening of cover (of any description and size) of septic tanks and soakage well/ pits, desludging/ dewatering of septic tanks and soakage well/pits of any size and depth by mechanical pumping truck mounted (having minimum storage capacity of 2500 ltrs) making it fully functional and removing sludge outside the periphery of defence land at his own arrangement at a minimum distance of 50 m from nearby living accn and burring in excavated pits including spraying of lime over returning filling of sand and covering the same including refixing covers after cleaning complete all as specified and all as directed by Engr-in-Charge.
Note: Unit rate quoted by tenderer shall include taking out sludge from septic tank and soakage well/pits in ground with pit by excavation of borrow pits for dumping sludge, removing including loading/unloading and transportation etc. | 90 | Each Job | 1,850 ₹1,66,500 | 1,850 ₹1,66,500 | 1,850 ₹1,66,500 | 100 ₹9,000 Lowest |
| 7.00 | Cutting and demolition of exising SGSW sewer pipe in damaged portion alongwith concrete bedding including removing unsv materials from site as directed and providing SGSW drain pipe grade 'A' placed in position and jointed with existing sewer line in CM 1:1 including packing under and haunching against the sides of pipe with PCC 1:3:6 type C-2 using 40 mm graded stone aggregate for 100mm internal dia of sewer line, complete all as specified and directed.
Note:- Earthwork like excavation, returning filling and removal required for the repair of said work shall be inclussived in the rate quoted by the contractor | 240 | RM | 390 ₹93,600 Lowest | 390 ₹93,600 Lowest | 390 ₹93,600 Lowest | 700 ₹1,68,000 |
| 8.00 | All as per item No-07 above but for 150mm dia pipes, complete all as specified and directed. | 110 | RM | 490 ₹53,900 Lowest | 490 ₹53,900 Lowest | 490 ₹53,900 Lowest | 900 ₹99,000 |
| 9.00 | Repairs to Rat / mouse holes to the faces / surfaces of manhole by making good to wall surface, benching, drains / channel etc of sectional area not exc 150sqcm each and depth n.exc 25cm each and filling the same with plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) and finished the surfaces even and fair, complete all as specified and directed. | 34 | Each Job | 200 ₹6,800 | 200 ₹6,800 | 200 ₹6,800 | 50 ₹1,700 Lowest |
| 10.00 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. | 5 | Cum | 200 ₹1,000 | 200 ₹1,000 | 200 ₹1,000 | 50 ₹250 Lowest |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
23 Aug 2025, 6:00 pmClosed
GE 881 EWS
GE 881 EWS C/O 56 APO
CLEANING AND REPAIR OF SEWAGE LINES, SEPTIC TANKS, SOAKAGE WELL ALLIED WORKS AND REPAIR/ REPLACEMENT REWINDING OF VARIOUS RATING PUMP SETS INCL SUBMERSIBLE PUMPS ALONGWITH CONNECTED ACCESSORIES AND CLEANING OF RESERVOIRS/ UG SUMPS OF WATER SUPPLY SYS
2025_MES_719411_2
GE/PNH-50/2025-26
Open Tender
Civil Works - Canal
Item Rate
180 days
GE 881 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 881 EWS
₹78,000
Yes
3 Nov 2025
11 Aug 2025
26 Aug 2025
11 Aug 2025
23 Aug 2025
18 Aug 2025
Amount
Cleaning of blockage of Indian / european type WC up to first manhole and making the drain pipe of any dia fully functional by flushing with water to entire satisfaction of Engr-in-Charge including disposal of sludge outside the periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits complete all as specified and directed. Note:- Unit rate quoted by tenderer shall include clearing blockage, taking out sludge(liquid/semi liquid/solid ) , excavation of borrow pits for dumping sludge ,removing including loading/unloading and transportation etc.
Cleaning of blockage of Floor/Nahni/vermin trap of Kitchen/Bathroom/basin/sink/urinal etc upto & including gully trap by using hand pump with bucket or manually by rodding till clear flow of water is observed and removing the deposited sludge/solid/liquid material outside MD land, complete all as specified.
Cleaning of blockage of under ground sewer lines of any dia of pipe including manholes, gully traps etc. by means of cleaning by roding from manholes to manholes / inspection chamber to manholes / gully trap to inspection chamber and flushing after cleaning, taking out sludge collected in manholes, removing & depositing the same outside the periphery of defence land in the pit at a minimum distance of 50 m from nearby living accn and covering the sludge in pit with earth and finally spraying unslaked lime, dry, around the manholes and cover the pit, complete all as specified and directed. Note:-Cost of Taking out sludge, transporting of sludge out side the defence land, earth work & deposition in the pit with & including removing of surbs, grass, small roots etc around manhole, inspection chamber etc where required is deemed to be included in the unit rate to be quoted by tenderer.
Cleaning of blockage of under ground sewer lines of any dia of pipe by breaking / puncturing of pipe line including excavation in type of soil to depth upto 3mtr deep, removing the blockage and making good the pipe line bedding, relaying of pipe and making good the earth excavated incl redressing complete all as specified and directed.
Opening of cover (of any description and size) of septic tanks and soakage well/ pits, desludging/ dewatering of septic tanks and soakage well/pits of any size and depth by manually operated machine (where approach for vehicle is not feasible) making it fully functional and removing sludge outside the periphery of defence land at his own arrangement at a minimum distance of 50 m from nearby living accn and burring in excavated pits including spraying of lime over returning filling of sand and covering the same including refixing covers after cleaning complete all as specified and all as directed by Engr-in-Charge. Note: Unit rate quoted by tenderer shall include taking out sludge from septic tank and soakage well/pits in ground with pit by excavation of borrow pits for dumping sludge, removing including loading/unloading and transportation etc.
Opening of cover (of any description and size) of septic tanks and soakage well/ pits, desludging/ dewatering of septic tanks and soakage well/pits of any size and depth by mechanical pumping truck mounted (having minimum storage capacity of 2500 ltrs) making it fully functional and removing sludge outside the periphery of defence land at his own arrangement at a minimum distance of 50 m from nearby living accn and burring in excavated pits including spraying of lime over returning filling of sand and covering the same including refixing covers after cleaning complete all as specified and all as directed by Engr-in-Charge. Note: Unit rate quoted by tenderer shall include taking out sludge from septic tank and soakage well/pits in ground with pit by excavation of borrow pits for dumping sludge, removing including loading/unloading and transportation etc.
Cutting and demolition of exising SGSW sewer pipe in damaged portion alongwith concrete bedding including removing unsv materials from site as directed and providing SGSW drain pipe grade 'A' placed in position and jointed with existing sewer line in CM 1:1 including packing under and haunching against the sides of pipe with PCC 1:3:6 type C-2 using 40 mm graded stone aggregate for 100mm internal dia of sewer line, complete all as specified and directed. Note:- Earthwork like excavation, returning filling and removal required for the repair of said work shall be inclussived in the rate quoted by the contractor
All as per item No-07 above but for 150mm dia pipes, complete all as specified and directed.
Repairs to Rat / mouse holes to the faces / surfaces of manhole by making good to wall surface, benching, drains / channel etc of sectional area not exc 150sqcm each and depth n.exc 25cm each and filling the same with plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) and finished the surfaces even and fair, complete all as specified and directed.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and directed.
Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with mixing with water proofing compound as per manufacturer's instruction & finishing the surface even and smooth without using extra cement, complete all as specified. Note:- WPC shall be measured & paid seperately under relevent item.
Supply only Integral water proofing compound confirming to SI: 2645-1975 specifiaction complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge.
M&L for Plain Cement concrete (1:2:4) using 20mm graded stone aggregate as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block, kneelers, apex stones, bed plates, roof kerbs round or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as specified and directed.
M&L for Precast reinforced cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:6) including necessary form work complete all as specified and directed by Engineer-in-Charge. Note:- Reinforecement shall be measured & paid seperately under relevent item.
S&F TMT bars, 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia, complete all as specified and directed.
M&L For RCC M-20 (Nominal Mix) 20mm graded aggregate,Slabs supported on walls beams and columns in floors, roofs,landings, balconies,canopies, deck slabs and in shelves complete all as specified and directed.
Formwork to soffits of suspended slabs,flooeslabs,landings and similar work not exceeding 200mm thik on flat surfaces complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer and fixed in position incl all connections, all as specified in SSR Part-I, incl dismantling of existing water tank and removing to store, complete all as specified and directed.
S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer and fixed in position incl all connections, all as specified in SSR Part-I, incl dismantling of existing water tank and removing to store, complete all as specified and directed.
M&L for Lifting /lowering unservicable submersible pump assembly completely any type/size up to 30 HP alongwith column/delivery pipe of 50/80mm dia after disconnecting the electrical connection from the deep tube well/Dugwell of various depth, segregating components for carrying out repair work such as rewinding of burnt motor and servicing of pump etc and re-assembling after repair, lowering in to the bore well, including aligning and commissioning complete all as specified and directed. Note: (a) Unit rate quoted shall deemed to be included labour for taking up & lowering the submersible pump from bore well along with delivery pipe complete (b) Repairs/rewinding of submersible pump shall be measured & paid for separately under relevant items. (c) Replacement of column pipe will be measured and paid for separately as supply only, under relevants items.
M&L for transporting the unserviceable submersible pump set upto 30 HP capacity from site to nearest authorised work shop, dismantling the pump motor assembly, replacement of unserviceable parts including servicing/overhauling the pump, re-assemblying and brought back to site, complete all as specified and and directed.
Supply only following spare parts for submersible pump set vertical type up to 30 HP of existing make complete all as speified and directed:-
SS impeller
Thrust bearing
Thrust plate set
Sand Guard
Stainless steel bush
Pump Shaft
Non Return Valve
M&L for taking out the submersible pump set upto 30 HP capacity from site to nearest authorised work shop, dismantling and rewinding the burnt motor with suitable gauge of PVC insulated super enamelled copper wire as per manufacturer's instruction and reassemblying, testing and brought back to site complete all as specified and directed.
Supply only column pipe 80 mm dia galvanised iron medium grade, 3 metre in length, both ends flanged and duly welded complete all as specified and directed.
Supply only column pipe 50 mm dia galvanised iron medium grade, 3 metre in length, both ends flanged and duly welded complete all as specified and directed.
M&L for dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carrying necessary repair/ servicing by replacing the unservicable parts including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 25 HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed. Note: (a) Unit rate quoted against this item shall deemed to include only labour for transportation and repair. (b) Spares /rewinding of pump set shall be measured & paid for separately under relevant items.
Supply only following spare parts for centrifugal pump set up to 25 HP complete all as speified and directed:-
CI impellers
Diffuser
Neck ring
Shaft bush
Shaft
Roller bearing
Stuffing box gland.
Bearing 6307/6309/ 6312/7307/7308. Make SKF/SBC
M&L for dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carrying necessary repair/ servicing by replacing the unservicable parts including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 30 to 60 HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed. Note: (a) Unit rate quoted against this item shall deemed to include only labour for transportation and reapir. (b) Spares /rewinding of pump set shall be measured & paid for separately under relevant items.
Supply only following spare parts for centrifugal pump set up to 30 HP to 60 HP complete all as speified and directed:-
CI impellers
Diffuser
Neck ring
Shaft bush
Shaft
Roller bearing
Stuffing box gland.
Bearing 6307/6309/ 6312/7307/7308. Make SKF/SBC
M&L for taking out worn out winding of centrifugal pump motor of capacity upto 25 HP carefully and rewinding the same with existing size of super enamelled copper winding wire, including necessary varnishing and insulating material baking etc, transportation to workshop and back to site complete all as specified and and directed by Engineer-in-Charge.
All as per item No 58 above but motor capacity 30 to 60 HP complete all as specified and and directed.
M&L for taking down/disconnecting the existing Star Delta starter of Centrifugal / submersible pump from motor control panels of various pump houses and replace with new Star delta starter of capacity 10 HP to 25 HP, three phase, including making electric connection, complete all as specified and directed.
All as per item No. 60 above but of capacity 30 HP to 60 HP complete all as specified and and directed.
M&L for repair of starter panel by disconnecting all electric connections and replacement of unsv parts like contactor, relays, coil etc and connecting to the existing pump set of capacity up to 60 HP and testing taking , complete all as specified and directed.
M&L for replacement of MCCB, 35 KA capacity, 4 pole, 400 amps with necessary cable thimble and insulating material, complete all as specified and directed.
M&L for replacement of MCCB, 35 KA capacity, 4 pole, 250 amps with necessary cable thimble and insulating material, complete all as specified and directed.
M&L for repair to starter panel with replacement of worn out parts like connecting cables, voltmeter, ammeter, single phase preventer, indicator, CTs etc incl necessary insulation to bus bar, complete all as specified and directed.
M&L for replacement of unserviceable change over switch, enclosure type, powder coated with necessary connection of capacity 400 A complete all as specified and as directed.
M&L for replacement of unserviceable change over switch, enclosure type, powder coated with necessary connection of capacity 200 A complete all as specified and as directed.
S&F in repair Submersible cable flat three core PVC insulated and PVC sheathed industrial copper cable of size 16 Sqmm 1100 Volts for connection from starter to motor, complete all as specified and directed.
S&F in repair Submersible cable flat Three core PVC insulated and PVC sheathed industrial copper cable of size 6 Sqmm 1100 Volts for connection from starter to motor, complete all as specified and directed.
S&F in replacement manually Operated Oil Immersed Star Delta Motor Starter for 50 to 60 HP Motor, 3 phase, 415 Volt, with thermal over load relay, single phasing protection and free mechanism with single contact duly oil filled including testing and taking down old unserviceable starters complete all as specified and directed.
All as per item No. 70 above but motor capacity 25 to 40 HP complete all as specified and directed.
S&F in repair Cast iron reflux valve 100 mm bore, with by pass arrangement, complete all as specified and directed.
All as per item No. 72 above but 80 mm bore complete all as specified and directed.
All as per item No. 72 above but 50 mm bore complete all as specified and directed.
Supply and fixing in repair cast iron foot valve with Gun metal ring and ledgther gasket of size 80 mm complete all as specified and and directed.
Supply and fixing in repair cast iron foot valve with Gun metal ring and leather gasket of size 50 mm, complete all as specified and and directed.
M&L for repalcement of pump set chasis with necessary welding work, replacement of mounting bolts and necessary PCC work, complete all as specified and directed by Engr-in-Charge at site.
M&L for cleaning of under ground sump, semi under ground sump of capacity 10000 to 50000 gallons ( Drinking water sump) after bailling out of water from tank & cleaning of all sides of wall, top, bottom with fresh water, with the help of pressure jet pump (Maximum pressure up to 120 bar ) and vacuum suctioner pump, spray of chemical for anti fungal approved by WHO on all sides of walls after cleaning and applying two coats of white wash on external surfaces and writing date of cleaning on the tank complete all as specified and and directed by Engineer - in -charge .
S&F in repair Earthing complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron strip 32X6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 40mm dia connected to main earth wire on pole or control board, GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1, 40mm thick Precast RCC cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle including excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and and directed by Engineer - in -charge .
S&F in repair pump for priming of monoblock pump 1 HP single phase mounted on MS channel/angle iron including all necessary fittings complete all as specified and directed.
M&L for preparation of old steel surface by complete removal of old paint and Painting of pump/ motor of any type and any capacity and Pipe of any dia for complete surfaces by applying two coats of synthetic enamel paint over one coat of red oxide primer as per colour code on pump sets including marking of SM/MES No of appropriate size of letters with white paint, complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:3:6 (nominal mix) type C-1 using 20mm graded crushed stone aggregate, as in foundation filling and mass concrete for haunching of pipe of any size complete all as specified and directed.
M&L for dismantling and taking out the centrifugal pumping set with motor from the existing foundation for refixing on another location/ Pump house by aligning and commissioning including necessary new foundation alongwith 8 Nos of "J" bolts and chasis of suitable size, connecting up all as required at site of capacity from 25 to 60 HP including necessary addition and alteration or modification to existing pipe line upto 150mm dia including cutting, welding, flanges, gasket complete all as specified and directed. Note: (i) Any bend, elbow, reducer, any short length, flanges, gasket, nut & bots etc is deemed to be included in quoted rate. (ii) Starter & cable to be measured and paid separately.
S&F in repair CI/DI flanged fittings like bends (any radius and angle) tappers any type (straight, bend, increasing, decreasing or double socket), Tee pieces single branch, "Y" junction, double branch, cross (all socket or socket spigot) collars, caps, caps & plug for pipes with spigot or flanged end of any size, complete all as specified and directed.
S&F in repair metal pump & motor star coupling of size 4" dia suitable for existing pump set complete all as specified and directed.
S&F in repair metal pump & motor coupling tyre type of size 4" dia with nut & bolts suitable for existing pump set complete all as specified and directed.
S&F in repair rubber tyre coupling No. TC-013/014/016 of size 6" dia suitable for existing pully set of pump & motor with nut and bolts complete all as specified and directed.
S&F in repair rubber star coupling L-225 of size 125mm dia suitable for existing pully set including alignment of pump & motor, complete all as specified and directed.
S&F in repair DOL starter 7.5 HP (MK 2) suitable for 7.5 HP 3 phase, 415 volts AC supply motor complete all as specified and directed.
S&F in repair Amp meter square type of size 9.5 cm x 9.5 cm digital type with CT 03 Nos complete of suitable size, complete all as specified and directed.
S&F in repair Amp meter square type size 5 cm x 5 cm analogue type with CT 03 Nos complete of suitable size complete all as specified and directed.
S&F in repair Volt meter square type of size 9.5 cm x 9.5 cm digital type, complete of suitable size complete all as specified and directed.
S&F in repair cooling pipe set incl nut and stud nipple alongwith aie release valve suitable for existing centrifugal pumps upto 60 HP as per existing make & model, complete of suitable size, complete all as specified and directed.
S&F in replacement of thimble aluminium upto 300 Sqmm suitable for LT XLPE cable, complete of suitable size complete all as specified and directed.
Supply, laying , jointing and testing in replacement of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 95 sqmm 3.5 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts including cable gland of suitable sizes and aluminium lugs for connection, complete all as specified and directed.
All as per Item No 95 above but size 3.5 core 70 sqmm complete all as specified and directed.
All as per Item No 95 above but size 3.5 core 50 sqmm complete all as specified and directed.
All as per Item No 95 above but size 3.5 core 25 sqmm complete all as specified and directed.
NATIONAL TRADING COMPANY (BID ID -3403469)
KRISHNA ENGINEERING ENTERPRISES (BID ID -3403863)
M/S PARSHOTAM KUMAR GUPTA (BID ID -3403835)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .