ARIASP-EGTRD-263

Amount

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres. a) Cement concrete work grade M15 & M20

Labour for desilting of land slide soil/mud/ debris etc from road surface Road side drain and side berm by truck carriage within a distance of 3.00km including loading and unloading both ends etc completed as directed.

Providing, fitting and fixing in position of Ornamental Grill of size (2000mm x 1120mm) at Footpath edge as per drawing and technical specification as directed by the deptt.

Providing and fixing in position moulded cement concrete block( kerb) manufactured by GEMs of base width 30cm and height 45cm in proper level and grade at footpath edge divider block etc as directed by the department. Size-300x550x100

Providing and fixing in position moulded cement concrete block( kerb) manufactured by GEMs of base width 30cm and height 45cm in proper level and grade at footpath edge divider block etc as directed by the department. Size-300x450x100

Providing and fixing in positiuon Anti skid paver Tiles as per BIS specification with size 340mmx340mm x 25mm as directed and approved by the department.

40 mm thick marble chips flooring rubbed and polished to granolithic finish with under layer of 25 mm thick cement concrete in prop. 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate of 10 mm and down graded) and top layer 15 mm thick with marble chips of any colour or combination of colours of required sizes from 7 mm to 10 mm nominal sizes laid in cement marble powder mix 3:1 (3 cement:1marble powder by weight) in proportion 4:7 (4 cement marble powder mix :7 marble chips by volume )

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed.

Plain/Reinforcedcement concrete, in open founadtion complete as per drawing and technical specification and steel shuttering formwork. M20

Brick masonry work in cement mortar 1:3 in foundation complete excluding pointing and plastering, as per drawing and technical specifications

Painting on Steel Surfaces (Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade)

Applying one self-priming coat of Unicem "Shakti" brand of required shade over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachablebattery, m6 LED sthree on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician).

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surfac using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandator & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand). 60cm equilateral traingle

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandator & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand). 60cm circular.

Raising and Repairing of Drain: (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres). a) Cement Concrete Grade M15 & M20

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres). b) Dismantling brick/Tile work

Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and technical specifications.

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical specifications.

Plain/Reinforcedcement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. N) Without plasiticiser, A) RCC M20

Supplying, fitting and placing TMT bar reinforcement in substructure complete as per drawing and technical specifications. (a) TMT-IS 1786 (Fe 500D) Primary producer (TATA/SAIL/Esser Steel/Jindal panther steel/Shyam steel or equivalent)

Providing weep holes in Brick masonry/Plain /Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification

Construction of Slab (size-1.05m x 47m : Plain/Reinforcedcement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. A) M20

Supplying, fitting and placing TMT bar reinforcement in substructure complete as per drawing and technical specifications.

Construction of Slab (size-1.35m x 47m : Plain/Reinforcedcement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. A) M20

Supplying, fitting and placing TMT bar reinforcement in substructure complete as per drawing and technical specifications.

RCC Slab Culvert: (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres). a) Cement Concrete Grade M15 & M20

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres). b) Dismantling brick/Tile work

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material

Construction of dry rubbl flooring at cross drainage works for relatively less important works

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Supplying, fitting and placing HYSD reinforcement in substructure complete as per drawing and technical specifications

Plain/Reinforcedcement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. Using Concrete Mixer. A) RCC M20

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification. Sandy Materials

NIRMAL PATHAK