Day to day maintenance of water supply including providing and fixing water fittings, HDPE Overhead tanks, valves etc. for residential and welfare buildings at Kuchana Housing Complex under Majri Area.

Amount

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 50 mm dia nominal bore

Providing and fixing G.I pipes complet with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work- Exposed on wall : 25 mm dia nominal bore.

Providing and fixing G.I pipes complet with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work- Exposed on wall : 20 mm dia nominal bore.

Providing and fixing G.I pipes complet with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work- Exposed on wall : 15 mm dia nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing brass stop cock of approved quality. 15 mm dia nomial bore

Providing and fixing brass bib cock of approved quality. 15 mm dia nomial bore

Providing and fixing PTMT bib cock of approved quality (Prayag / Pearl or equivalent make) and colour 15 mm nominal bore, 122mm long, weighing not less than 99 gms

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 80 mm

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tall pieces if required will be paid separately) :100 mm dimmeter class II.

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tall pieces if required will be paid separately) :150 mm dimmeter class II.

Providing and fixing ball valve (brass) of approved quality, High or low pressur, with plastic floats comlpete. 25 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore

Providing and fixing PTMT, push cock of approved quality (Prayag / Pearl or equivalent make) and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Providing and fixing PTMT grating of approved quality (Prayag /Pearl or equivalent make) and colour.Circular type 100 mm nominal dia

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation up to store excluding GST levied by GOI and GOM in all respect etc. complete. 150 mm dia

Exacavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil,and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed,within a lead of 50 m :All kinds of soil. Pipes,cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.

Providing and fixing PTMT pillar cock of approved quality (Prayag / Pearl or equivalent make) and colour. 15 mm nominal bore, 125 mm long foam flow,weighing not less than 120 gms.

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length : 15 mm nominal bore.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing and fixing CP Brass pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 690gms

Providing and fixing CP Swan Neck pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long fome flow, weighing not less than 690 gms

Assistant to departmental fitter by engaging unskilled manpower in attending minor/major water supply complaints as per instruction of Engineer-in-charge.

Providing & fixing HDPE over head tank cover for 500/ 1000 ltr capacity etc all complete job as per instructions of E/I .

Providing and fixing G.I. Flanges 50 mm dia including nut and bolt as per instruction of EI

Total impact of GST for the purpose of CTC

SURYANATH YADAV

SAMEER SANJAY BOBADE

PRASHANT RAMBHAU PETKULE