S PL REPAIR TO LT UG CABLES, LT PANELS, STREET LIGHT TUBULAR POLES AND CONNECTED WORK AT RASPUNJA MIL CAMP UNDER GE (CENTRAL) KOLKATA

Amount

Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for laying of cables/foundation of poles and getting out in soft /loose soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well rammming in layers not exc 25cm complete all as specified and directed.

Removing excavated materiasl not exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and direced.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed.

Laying only in trenches Old serviceable bricks obtained from taking out old unserviceable XLPE cable, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed.

Taking out old U/S LT UG cable of any size and any description including GI pipe of any dia fixed with bldg and bricks for cable protection where ever appeared complete all as directed by Engineer-in-Charge. Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately.

Supply & laying or fixed with bldg incl clamps for XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 120 Sqmm 3.5 core complete all as specified and directed.

All as per item No 8.00 above but 95 Sqmm 3.5 core

All as per item No. 8.00 above but 70 Sqmm 3.5 core

All as per item No. 8.00 above but 50 Sqmm 3.5 core

All as per item No. 8.00 above but 35 Sqmm 3.5 core

All as per item No. 8.00 above but 25 Sqmm 4.0 core

All as per item No. 8.00 above but 16 Sqm 2 core

All as per item No. 8.00 above but 10 Sqm 2 core

M&L for Cutting roads / hard standing to a depth not less than 60 cm and not less than 45 cm wide for laying of GI pipe to draw the UG cable and making good the disturbed surfaces by filling of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate and finished the surface even and smooth with out using extra cement and disposed off the surplus debris and soil to a distance not exc 50 m complete all as specified and as directed.

M&L for 40mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed.

All as per item no 17.00 but 50 mm dia

All as per item no 17.00 but 80 mm dia

All as per item no 17.00 but 100 mm dia

S&F PVC cable terminal boxes, outdoor type of size 155mm x210mm x92mm with MCB SP 6 to 32 Amps including all necessary fittings and connection including taking down old unserviceable one complete all as specified and directed. Make:- Hansel Model No. KF 1616G or equivalent model from Make:- Sitex/ Universal.

S&F PVC cable terminal boxes, outdoor type of size 93mm x93mm x62mm including fixing with clamp including taking down old unserviceable one complete all as specified and directed. Make:- Hansel Model No. KF 0200B or equivalent model from Make:- Sitex/ Universal.

S&F PVC pole boxes, outdoor type of size 195mm x135mm x90mm IP 65 for pedestrin lighting including fixing with clamp including taking down old unserviceable one complete all as specified and directed. Make:- Sintex Model No. GSJB 2014 or equivalent model from Make:- Hansel/ Universal.

S&F Straight through joint kit heat shrinkcable jointing kit for LT ,1100 Volts grade complete with jointing materials and accessories suitable for 3.5/4 core XLPE armoured conductor cable of following size including testing complete all as specified and as directed. (A)10 to 16 Sqmm 2 core

25 to 50 Sqmm 3.5 core

70 to 150 Sqmm 3.5 core

Supply and fix PVC insulated, stranded copper electric cable, 2.5 Sqmm 2 core drawn into the steel tubular pole by drilling holes above the junction box and another holes near street light bracket including taking out old unserviceable copper wire complete all as specified and as directed.

S&F Changeover switch in sheet steel encloser four pole 200 Amps ,Manual type 415Vwith necessary cable lugs including taking down old burnt/unserviceable one after opening all electrical connection complete all as speceified and directed.

S&F MCCB, 400 Amps, 36kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 250 Amps, 36kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 200 Amps, 36kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 160 Amps, 36kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 100 Amps, 25kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F LED decorative post top lanterns 35/40 W for energy conservation upto 50% and with eco friendly lighting system including taking down old unserviceable post top lantern of any capacity complete all as specified and as directed. Make : Bajaj Celesta BGCL 40W LED WH or Havelles cat part no RUBYPT35WLED830PSYMTOPC or Crompton Greaves Cat No. MAPLE LPTO-40/CDL or equivalent

S&F LED street light luminaries 60 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal mangement in multiple optics with IP 65/66 protection including taking down old unserviceable one complete all as specified and as directed. Make : Bajaj cat no. ENXT P 72L WH CR PC SD or CG model No. LST-60-CDL-M or Surya model no: SLE UL 60W IP66(LXN) or equivalent .

S&F LED street light luminaries 90 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal mangement in multiple optics with IP 65/66 protection including taking down old unserviceable one complete all as specified and as directed. Make : Bajaj cat no. ZELA P 108L WH PO TG SD or CG model No. LSTP-90-CDL-HPM or Surya model no: SLE UL 90W IP66(LXN) or equivalent make of Bajaj/Philips or etc.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 32x6 as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed.

Supply, installation, testing and commissioning of feeder pillar box CPRI approved of size 1.5m x 1.5m x 0.50m, outdoor type, totally enclosed, dust and vermin proof, factory made, confirming to IP-54, double door both front and back side, with locking arrangement, prewired, made out of 3mm thick CRCA sheet with 04 Nos legs, MS angle of size 40x40x6mm of size 0.60m long suitably grouted with PCC type C2 ( 1:3:6, using 40mm graded crushed stone aggregates) and 15mm thick cement plaster in CM 1:4 over concrete surfaces including two coats of synthetic enamel paint of approved colour over a coat of red oxide primer on stell surfaces both internally and externally with aluminium bus bar 600 Amps rated duly colour coated 04 Nos and connection through aluminium busbar of appropriate size to MCCBs and MCBs and power contactor and accessories fitted in it for incoming and outgoing cable, including LED multi function meter and necessary cable, lugs and glands with following accessories including taking down old unservicaeble feeder pillar box complete all as directed by Engineer-in-Charge. incoming (a) MCCB, 250Amps, 4 Pole, 415 Volts, 25 kA fixed thermal and magnetic release. -01 No (incoming) (b) MCCB, 63 amps 4 pole , 25 KA.fixed thermal and magnetic release. -04 No (out going) (c) MCB, B Curve FP 32 apms breaking capacity 10 KA- 02 Nos(out going) (d) LED Multifunction meter with CT of required capacity . -01 No. (e) LED Phase indicating lamp RYB- 1 SET (f) Timer switch of FM/1 QUARTZ type (daily)cotact rating 240V AC (resistive) single phase Make:- L&T Cat part No. AUTS01ANA00 or equivalent model from make:- Schneider / ABB / SIEMENS-01 No. (g) Modular Contactor, 40A-4NO, 3 module -01 N0.Make:- L&T Cat part No. AUMC2004003 or equivalent model from make:- Schneider / ABB / SIEMENS-01 No. Note:- Drawing shall be submitted from manufacturer and same shall be got approved by Accepting officer.

Supply, installation, testing and commissioning of feeder pillar box CPRI approved of size 1.5m x 1.2m x .60m, outdoor type, totally enclosed, dust and vermin proof, factory made, confirming to IP-54, double door both front and back side, with locking arrangement, prewired, made out of 3mm thick CRCA sheet with 04 Nos legs, MS angle of size 40x40x6mm of size 0.60m long suitably grouted with PCC type C2 ( 1:3:6, using 40mm graded crushed stone aggregates) and 15mm thick cement plaster in CM 1:4 over concrete surfaces including two coats of synthetic enamel paint of approved colour over a coat of red oxide primer on stell surfaces both internally and externally with aluminium bus bar 600 Amps rated duly colour coated 04 Nos and connection through aluminium busbar of appropriate size to MCCBs and MCBs and power contactor and accessories fitted in it for incoming and outgoing cable, including LED multi function meter and necessary cable, lugs and glands with following accessories including taking down old unservicaeble feeder pillar box complete all as directed by Engineer-in-Charge. (a) MCCB, 200Amps, 4 Pole, 415 Volts, 36 kA fixed thermal and magnetic release. -01 No ( Incoming). (b) MCCB,100Amps, 4 Pole, 415 Volts, 25 kA fixed thermal and magnetic release. -04 No ( outgoing). (c) MCB, B Curve FP 32 apms breaking capacity 10 KA- 02 Nos(out going) (d) LED Multifunction meter with CT of required capacity . -01 No. (e) LED Phase indicating lamp RYB- 1 SET (f) Timer switch of FM/1 QUARTZ type (daily) cotact ratings 16A ,240V AC (resistive) single phase-01 No. Make:- L&T Cat part No. AUTS01ANA00 or equivalent model from make:- Schneider / ABB / SIEMENS (g) Modular Contactor, 40A-4NO, 3 module -01 N0.Make:- L&T Cat part No. AUMC2004003 or equivalent model from make:- Schneider / ABB / SIEMENS Note:- Drawing shall be submitted from manufacturer and same shall be got approved by Accepting officer.

M&L Preparation of old painted surface of existing steel tubular swaged pole 9 mtr long, cross arms, clamps, GI street light bracket etc and applying two coats of aluminium paint including writing pole number & bottom of pole painted with black paint with yellow strip around between the junction of aluminium paint and black paint complete all as specified and directed.

Taking up unserviceabel LT steel tubular pole of any size including demolition of PCC foundation and coping of any description transporting to store complete all as specified and directed by Engineer-in-Charge.

M&L Steel tubular sewaged pole 9 mtr long completed with MS base plate, finial taper plug nut bolts, screws as specified type 410 SP-31 as per relevant IS specifiecation including two coats of aluminimum paint over a coat of red oxide primer complete all as specified and directed. Note : Earth work/excavation PCC shall be measured and paid separately under relvent item.

M&L Plain cement concrete (1:4:8) type D-2, using 40mm graded aggregate as in pole foundation/foundation of feeder pillar complete all as specified and as directed.

M&L Plain cement concrete (1:3:6) type-C-2 using 40mm graded aggregate as in bases of pole and feeder pillar including necessary form work complete all as specified and as directed.

M&L Plain cement concrete (1:2:4) type-B-1 using 20mm graded aggregate as in coping of pole including necessary form work complete all as specified and as directed.

M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces even & smoth without using extra cement complete all as specified and directed.

M&L Danger notice plate of 1.6mm thick for HT 20x15cm mild steel sheet, vitreous enameled white with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts incl taking down old unserviceable one complete all as specified and as directed.

S&F Flexible pvc pipe of size 25mm suitable for electric connection complete all as specified and as directed.

S&F Analog Timer switch 240V AC 50Hz Current rating 16A/250V AC Resistive type QT(daily) after taking down old unserviceable one complete all as specified and directed. Make :L&T Cat No. SS90721 or equivalent as specified in the particular specifications.

Yaduvanshi Traders

Ultimate Solution Company

M/s UNIVERSAL

INDIA ELECTRICAL EQUIPMENTS

SANTOSH INTERNATIONAL

R T BUILDERS

ESS PEE UDYOG

M/S RAJ CONSTRUCTION AND COMPANY

KAY BEE ASSOCIATES