Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.8 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 BIDDER | |
| 2 | L2₹51.9 L+₹2.2 L (4.34%)Rejected-Finance | L2 | Rejected-Finance REJECTED DUE TO L2 BIDDER | |
| 3 | L3₹53.3 L+₹3.5 L (7.06%)Rejected-Finance | L3 | Rejected-Finance REJECTED DUE TO L3 BIDDER | |
| 4 | L4₹53.3 L+₹3.5 L (7.12%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L4 | Rejected-Finance REJECTED DUE TO L4 BIDDER | |
| 5 | L5₹54.1 L+₹4.3 L (8.66%)Rejected-Finance | L5 | Rejected-Finance REJECTED DUE TO L5 BIDDER |
| Sl No | Description | Qty | Unit | M/S SM ANSARI L2 | M/S ASHOK CONSTRUCTION L3 | M/S PREM THILLEY L1 | M/S R N ENTERPRISES L4 | M/S N D ENTERPRISES L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting and dismantling carefully the existing inlet,outlet,wash out and over flow pipes, MS sheet, PS plate of any size and thickness, MS structural steel of any section from the existing PS Tank of capacity 20000 to 30000 Gln including unbolting nuts bolts and washer where ever required from existing PS tanks and making by pass arrangement to continue existing water supply by using GI tubing, valves, fittings etc of required sizes and taking out the said arrangement after completing the work all as directed. (Note : cost of by pass arrangement shall deemed to be included in quoted rate) (Engr Water Point Tank No 1) | 1 | Each Job | 80,000 ₹80,000 Lowest | 80,500 ₹80,500 | 80,000 ₹80,000 Lowest | 82,000 ₹82,000 | 83,000 ₹83,000 |
| 2.00 | Dismantling carefully the existing MS sheet of any size and thickness, MS structural steel of any section from the existing PS Tank of capacity 40000 to 50000 Gln including unbolting nuts bolts and washer where ever required from existing PS tanks (CT Water Point Tank No 1 & 2) | 20 | Each Sheet | 1,500 ₹30,000 | 1,600 ₹32,000 | 1,400 ₹28,000 Lowest | 1,600 ₹32,000 | 1,700 ₹34,000 |
| 3.00 | Supply and fix MS plate 6 mm thick as per existing size for bottom and side of the PS tank upto 10 mtr height from the ground pre fabricated, factory made including drilling holes, welding cutting etc fixing with new nuts, bolts and washers and all new jointing materials such as lead wool gasket black non toxic putty etc complete all as specified and directed. (Engr Water Point PS Tank No 1- 65 Nos Plate @ 74 Kg size 1.25x1.25x6mm) | 5,000 | Kg | 280 ₹14,00,000 Lowest | 280 ₹14,00,000 Lowest | 280 ₹14,00,000 Lowest | 288 ₹14,40,000 | 290 ₹14,50,000 |
| 4.00 | Supply and fix 3.15 mm thick MS sheet as per existing size for roof of the PS tank upto 12 mtr height from the ground pre fabricated, factory made including drilling holes, welding cutting etc fixing with new nuts, bolts and washers and all new jointing materials such as lead wool gasket black non toxic putty etc complete all as specified and directed. (CT Water Point PS Tank No 1 & 2-10 & E/WP -15 Nos Plate @ 70 Kg size 2.44m x 1.22mx3.15mm) | 1,750 | Kg | 230 ₹4,02,500 | 235 ₹4,11,250 | 205 ₹3,58,750 Lowest | 235 ₹4,11,250 | 250 ₹4,37,500 |
| 5.00 | Supply and fix MS angle, MS flat or MS tee section of grade Fe-410-W cut to required size and shape for bracing, supports and clamps including welding drilling holes, fixing with new or old serviceable nuts, bolts and washers complete all as specified and directed. (Note :All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only). (Engr Water Point 100 RM & CT - 50 RM total 150 RM wt 65x65x6mm @ 5.8 Kg per RM | 800 | Kg | 185 ₹1,48,000 Lowest | 192 ₹1,53,600 | 185 ₹1,48,000 Lowest | 190 ₹1,52,000 | 200 ₹1,60,000 |
| 6.00 | S&F 16 mm to 20 mm Hexagonal head and 30 to 75 mm long MS screw bolt (Machine made) with two number of washers one hexagonal nuts for required size of bolts (n.exc 5 cm long) incl washers complete all as specified and directed. ( 3424 Nos nut @ .4kg/Nut & 6848 Nos washers @ .03 Kg per washer) | 1,500 | Kg | 240 ₹3,60,000 | 250 ₹3,75,000 | 205 ₹3,07,500 | 250 ₹3,75,000 | 200 ₹3,00,000 Lowest |
| 7.00 | M/L for cleaning of PS storage tank of capacity 20000-30000 Gln upto 22 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed.: (CT-02, Tenga Market - 02 & Engr Water Point - 03, GOC House - 01) | 16 | Each Job | 8,000 ₹1,28,000 | 8,000 ₹1,28,000 | 7,218 ₹1,15,488 Lowest | 8,000 ₹1,28,000 | 8,200 ₹1,31,200 |
| 8.00 | M/L for cleaning of PS storage tank of capacity 40000-50000 Gln upto 22 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed (CT-02 Nos) | 4 | Each Job | 9,000 ₹36,000 | 9,000 ₹36,000 | 8,222 ₹32,888 Lowest | 9,000 ₹36,000 | 9,200 ₹36,800 |
| 9.00 | M&L for thorough cleaning of sedimentation tank with Gravity feed filter bed of of size 15x12x3.5 m after draining out complete, clean the surface, bottom, wall, chamber etc by the help of brushes chemical/Acid and taking out all silt, dirt etc complete all as specified and directed. (CT Water Point -1) | 3 | Each Job | 18,000 ₹54,000 | 19,000 ₹57,000 | 17,518 ₹52,554 Lowest | 18,500 ₹55,500 | 19,000 ₹57,000 |
| 10.00 | M&L for thorough cleaning of sedimentation tank with Gravity feed filter bed of of size 12x6x2.5 m after draining out complete, clean the surface, bottom, wall, chamber etc by the help of brushes chemical/Acid and taking out all silt, dirt etc complete all as specified and directed. (Engr Water Point - 1) | 3 | Each Job | 18,000 ₹54,000 | 19,000 ₹57,000 | 17,245 ₹51,735 Lowest | 18,500 ₹55,500 | 18,500 ₹55,500 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
22 Nov 2025, 9:00 amClosed
GE TENGA
GE TENGA PIN-790116 C/O 99 APO
REPAIR/REPLACEMENT OF WATER FILTRATION PLANT, CONTROL VALVES P S TANK, STAGING, FILTER MEDIA AND CONNECTED ITEMS AT PHASE -II (CHINDIT TOP, TENGA LEDGE, GOC CAMP AREA) OF E/M UNDER GE TENGA
2025_MES_727760_3
8044/E8
Open Tender
Civil Works
Item Rate
270 days
GE TENGA
PLS REF NIT
7 documents required · 7 mandatory
₹500
GE TENGA
₹96,000
Yes
7 Jan 2026
1 Nov 2025
24 Nov 2025
1 Nov 2025
22 Nov 2025
15 Nov 2025
Amount
Disconnecting and dismantling carefully the existing inlet,outlet,wash out and over flow pipes, MS sheet, PS plate of any size and thickness, MS structural steel of any section from the existing PS Tank of capacity 20000 to 30000 Gln including unbolting nuts bolts and washer where ever required from existing PS tanks and making by pass arrangement to continue existing water supply by using GI tubing, valves, fittings etc of required sizes and taking out the said arrangement after completing the work all as directed. (Note : cost of by pass arrangement shall deemed to be included in quoted rate) (Engr Water Point Tank No 1)
Dismantling carefully the existing MS sheet of any size and thickness, MS structural steel of any section from the existing PS Tank of capacity 40000 to 50000 Gln including unbolting nuts bolts and washer where ever required from existing PS tanks (CT Water Point Tank No 1 & 2)
Supply and fix MS plate 6 mm thick as per existing size for bottom and side of the PS tank upto 10 mtr height from the ground pre fabricated, factory made including drilling holes, welding cutting etc fixing with new nuts, bolts and washers and all new jointing materials such as lead wool gasket black non toxic putty etc complete all as specified and directed. (Engr Water Point PS Tank No 1- 65 Nos Plate @ 74 Kg size 1.25x1.25x6mm)
Supply and fix 3.15 mm thick MS sheet as per existing size for roof of the PS tank upto 12 mtr height from the ground pre fabricated, factory made including drilling holes, welding cutting etc fixing with new nuts, bolts and washers and all new jointing materials such as lead wool gasket black non toxic putty etc complete all as specified and directed. (CT Water Point PS Tank No 1 & 2-10 & E/WP -15 Nos Plate @ 70 Kg size 2.44m x 1.22mx3.15mm)
Supply and fix MS angle, MS flat or MS tee section of grade Fe-410-W cut to required size and shape for bracing, supports and clamps including welding drilling holes, fixing with new or old serviceable nuts, bolts and washers complete all as specified and directed. (Note :All new nuts and bolts and washer shall be measured and paid seperately here-in-after as supply only). (Engr Water Point 100 RM & CT - 50 RM total 150 RM wt 65x65x6mm @ 5.8 Kg per RM
S&F 16 mm to 20 mm Hexagonal head and 30 to 75 mm long MS screw bolt (Machine made) with two number of washers one hexagonal nuts for required size of bolts (n.exc 5 cm long) incl washers complete all as specified and directed. ( 3424 Nos nut @ .4kg/Nut & 6848 Nos washers @ .03 Kg per washer)
M/L for cleaning of PS storage tank of capacity 20000-30000 Gln upto 22 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed.: (CT-02, Tenga Market - 02 & Engr Water Point - 03, GOC House - 01)
M/L for cleaning of PS storage tank of capacity 40000-50000 Gln upto 22 mtr height from the ground by draining out water and removing of mud/sludge and sediments accumulated in bottom of the tank throughly by scrapping with wire brush, broom and wash out by flushing with clean water and drain out and drying up inluding marking the date of cleaning and due date for next cleaning, capacity of tank etc by painting complete all as specified and as directed (CT-02 Nos)
M&L for thorough cleaning of sedimentation tank with Gravity feed filter bed of of size 15x12x3.5 m after draining out complete, clean the surface, bottom, wall, chamber etc by the help of brushes chemical/Acid and taking out all silt, dirt etc complete all as specified and directed. (CT Water Point -1)
M&L for thorough cleaning of sedimentation tank with Gravity feed filter bed of of size 12x6x2.5 m after draining out complete, clean the surface, bottom, wall, chamber etc by the help of brushes chemical/Acid and taking out all silt, dirt etc complete all as specified and directed. (Engr Water Point - 1)
M&L for dismantling carefully the existing inlet,outlet pipe including unbolting nuts bolts and washer where ever required from vassel of the filtration plant cylindrical type at Chindit top & Engr water point and taking out carrefully existing filter media (sand/gravel), removing the same not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as directed. (CT-01, Engr WP-1)
M&L Silica Quartz sand with pebbles of multi grade sand filter as per the existing by size wise (i.e. 3 mm to 12.5 mm ) and layer wise complete all as specified and as directed.
M&L for taking out carrefully existing filter media in various sizes (sand/gravel) from 3 to 4 m depth Gravity feed filter bed and removing the same not exceeding 30 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as directed (CT Sedimentation Tank)
Supply and laying round shape gravels of size 6.5 to 12.5 mm for gravity feed filter as per existing by size wise and layer wise complete all as specified and as directed by Engr-in-Charge.
Supply and laying Barakar dust free river sand of size 0.5 to 1.0 mm for gravity feed filter as per existing by size wise and layer wise complete all as specified and as directed by Engr-in-Charge.
M&L for machine spray paint of outer surfaces of PS tank height 6-10 mtr from ground including rubbing, scrapping, cleaning, washing and applying coats of blue synthetic Enemel paint over a coat of red oxide primer for External sufaces of PS tank including writing letter or figures such as capacity of tank, date of cleaning (Block, Roman, Italic or Indian ) of letter size not exceeding 30 cm height with white synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
M&L for machine spray paint of inner surfaces of PS tank height 6-10 mtr from ground including rubbing, scrapping, cleaning, washing and applying coats of black bituminous paint anticorossive (suitable for drinking purpose) on internal sufaces of PS tank complete all as specified and directed.
Supply and Fixing for CI sluice class PN 1.6 long body type, 80 mm bore with brass spindle, both ends flanged with holes, ISI Marked (IS-14846-2000) provision of carbon steel nuts, bolts & washers, rubber gasket etc, with wheel, fixed to CI/GI water mains in any position including taking down old unserviceable sluice valve complete all as specified and as directed by Engr-in-Charge. Make :- Zoloto/Kirloskar/Venus/BIR
Description all as per item no 18 of above but size 100 mm dia Make :- Zoloto/Kirloskar/Venus/BIR
Description all as per item no 18 of above but size 150 mm dia Make :- Zoloto/Kirloskar/Venus/BIR
Supply only Calcium Hypochlorite 65% to 70% chlorine content in packed with 45 Kg each drum (calcium based granular disinfectant for water treatment much more stable than chlorine gas and stronger than bleaching powder & sodium hypochlorite complete all as specified and as directed by Engr-in-Charge. Make : Aquafit or equivalent as approved by NMPT committee of E-in-C's Branch. Note :-1.The calcium hypochoride will be issued in sealed containers of capacity 30/45/50 KG, cost of same shall be included in quoted rate.
Supply only Alum crystal type for agitation and water treatment as approved by GE. Note:-Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days.
S & F in replacement incl leakage testing galvanised steel water tubing medium grade 80 mm dia bore with all fittings such as bends, elbow, socket, reducer etc,connecting pipe to PVC tank through connectors as required at site, laid under floor / trenches all as specified & directed.
Description all as per item No 23 of above but of size 100 mm dia all as specified & directed
S&F in relacement of butterfly valves of 100 mm bore, (class I), ISI marked with operating hanlde fixed both ends for iron pipe, ISI marked, including dismantling U/S Butterfly valve complete all as specified and directed . Make :- Zoloto /Jindal/Sant
S&F in relacement of butterfly valves of 50 mm bore, (class I), ISI marked with operating hanlde fixed both ends for iron pipe, ISI marked, including dismantling U/S Butterfly valve complete all as specified and directed . Make :- Zoloto /Jindal/Sant
M&L for structural MS frame work half round or other stock section including securing posts and stuts in fencing, frame work for pump house/gates of installations, base frame for equipments including securing bolts, posts and sturts in fencing including cutting and makeing shapes as desired, drilling holes, notching for wire cut to size and made to the exisitng shape suitable for fixing MS chequred duct covers / door panels, including nuts, bolts and washers, welding / bracing works, bending cold or hot drilling holes for bolts in any shapeetc flat iron fillets (for securing wire mesh etc) all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 including one coat of primer and two coats of synthetic enamel paint to the entire steel surfaces all as specified and directed.
M&L for chain link MS galvanised fencing including lines wires, dia of chain link n less than 3.5 mm any mesh any size any type to any type strands rails, straining bolts etc complete all as specified and as directed by Engr-in-Charge.
M&L MS angles as fencing port, struct cutting tops in shape incl all necessary drilling, notching and reveting etc and similar work confirming Fe 410 complete all as specified and as directed by Engr-in-Charge.
M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as directed.
M&L for PCC 1:3:6 Type C2 for erection of fencing post/ mas concrete with 40 mm gradede coarse agreegete complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.
M & L for 15mm thick rendering on fair faces of brick,stone work/concrete surfaces of wall in CM (1:4), finished surface even and smooth without using extra cement complete all as specified and as directed.
M&L for construction of brick masonnary with full brick wall chamber size of 1000x1000x1000mm internal diemension with earth work on any type of soil , PCC M-10 type C-2 as in foundation , brick work in CM1:4, 15mm thick plaster in CM1:4 internaly and externally , flush pointed in same mortar as work proceeds , 75mm thick PCC coping all around (M-15 with 20mm aggregate ) , flooring shall 40mm thick PCC M-15 (Nominal Mix ) laid over 75mm thick hard core. Top cover shall be made out of 3mm thick MS sheet fixed in angle iron frame made out of angle iron size 40x40x6mm with two numbers of hinges on one side and locking arrangement at other side complete including painting with two coats of synthetic enamel paint over a coat of redoxide primer including demolation of old existing Abandoned valve pits complete all as specified and as directed by Engr-in-Charge.
Taking down defective electric motor of dosing motor 1 HP cap and supply and fix in replacement of dosing motor 1 HP cap squirrel cage type single phase 230 volt 50 Hz cap re-installation at site complete and testing complete all as specified and as directed by Engineer-in-Charge. Make- Pearls Filter/Daclibac/HP or eqivalent make .
Supply , fixing, testing and Commissioning Strainer ‘Y’ Conforming 150 mm dia complete all as specified and as directed by Engr-in-Charge.
Supply and fix in replacement,high pressure transparent type Suction/Discharge PVC pipe 3/8 '' dia outer of chloronome plant, as per OEM complete all as specified and as directed by Engr-in-Charge.
Supply only Orthotoline Solution in 500 Ml Bottle Note:- Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days.
Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing complete all as specified and as directed by Engr-in-Charge. tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 3 mtr in depth for laying of pipe/ cables/ poles/fencing posts etc and getting out hard & densile soil complete all as specified and as directed by Engr-in-Charge.
M/S SM ANSARI (BID ID -3475934)
M/S ASHOK CONSTRUCTION (BID ID -3476816)
M/S R N ENTERPRISES (BID ID -3476291)
M/S N D ENTERPRISES (BID ID -3476746)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.86 MB
BOQ_826385.xls
BOQ • 0.28 MB
Tender.pdf
Tender Documents • 6.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .