E-Tender No. 52/2023-24, EUDC-II, Noida.

Amount

Replacement of 11KV VCB of 33/11 KV NTPC Road Dadri and Kot, Dadri and Supply of 02 Nos. Transformer Trolly.

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 3

11 KV O/G VCB

11 KV XLPE Cable 3x185sqmm

400KVA T/F

LT XLPE 1x400sqmm

SUPPLY OF FOLLOWING MATERIAL BY THE CONTRACTOR FROM THE PVVNL APPROVED VENDORS AS PER GTP APPROVED.

Heat Shrinkable outdoor type end termination cable jointing kit suitable for 11KV XLPE 3x185 Sq.mm. cable (Make - Raychem/3M/Denson)

Fabrication of Transformer Trolley as per Specification and Drawing: Qzse& ,e-,l- pSuy 100×50×6 fe-eh- ,e-,l- pSuy 75×40×6 fe-eh-] ,e-,l- pSuy 50×50×6 fe-eh- yEckbZ & 3658 fe-eh-] pkSM+kbZ & 1829 fe-eh-] Å¡pkbZ & 2300 fe-eh- ¼IysV QkeZ ls½ csl & ,e0,l0 IysV 6 fe-eh-] lkbZM & ,e-,l- ,DliSUMsM esMy ifg;s & 4 vnn~ 7-50×16×14 IykbZ fje Mcy IysVsM ,fDly & LDok;j 65 fe-eh- otu & 1760 fdyks de T;knk 10 fdyks] {kerk & 5 Vu

Supply and Errection of the Following material for completing the work as per RESPO.

Laying and Fixing of LT 3x185sqmm Cable at for VCB installed at 33/11KV Substation Kot.

Laying and Fixing of LT 1x400sqmm Cable for Transformer Trolley.

Preparation of 11 KV Power Cable ends: Making of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect at 33/11KV Substation Kot.

Mounted of 400KVA T/F on new fabricated Trolley with commissioning of 400KVA and complete connections in all respect. (Connection for cable, lug or other preety items are in the scope of the contractor.)

Providing and Fixing of Best Quality Alu. Lug 400sqmm for Transformer Trolley as per site requirement.

Providing and Fixing of Best Quality Alu. Bus Bar for Transformer Trolley as per site requirement.

Installation and commissioning of 11KV O/G VCB at 01 No. 33/11KV S/s NTPC Road and 02 Nos. 33/11 KV S/S Kot Dadri with complete connections in all respect.

SUPPLY AND Laying of 3x50mm2 11KV cable from 11KV outgoing VCB in control room to PCC Double Pole after digging trench for laying cable and refilling of trench including connections at both ends after providing and crimping of lugs of proper size for completion of work and laying brick over & both sides of 11KV cable after digging trench of 0.3 m wide & 0.5 m depth and providing and wearing 75 mm dia G.I. pipe of 2.5 M length over 11KV Cable complete in all respect.

Plinth for 11 KV V.C.B. Construction of plinth for the structure of 11 KV VCB as per details (All required materials provided / Supply by the contractor own his cost) :- Excavation of earth of size (2.4x1.5x1.0)m pits for construction of plinth. Brick Ballast ratio (1:4:8) (cement, sand & brick ballast) for foundation work (2.4x1.5x0.15)m plinth. R.C.C. work in ratio 1:2:4 (cement, coarse sand & stone grit) of 20m size for making plinth of size (2.4x1.5x1.0)m and grouting of foundation bolts 03 Nos. for 11 KV VCB.12mm thick plaster with cement mortar in ratio 1:4 (cement & fine sand) of plinth of 0.4m upper side size (2.4x1.5x0.4)m.

Dismentaling of old and damaged 11KV O/G VCB at 01 No. 33/11KV S/s NTPC Road and 02 Nos. 33/11 KV S/S Kot Dadri and safe carriage of its from Site to any Store/Workshop of PVVNL including loading and unloading both ends.

M/s Ashu Brothers

Anjali Electricals