Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹44.4 L+₹1.1 L (2.66%)Rejected-AOC | L2 | Rejected-AOC 2nd Lowest | |
| 3 | L3₹44.7 L+₹1.5 L (3.37%)Rejected-AOC | L3 | Rejected-AOC 3rd Lowest | |
| 4 | L4₹45.0 L+₹1.7 L (3.98%)Rejected-AOC | L4 | Rejected-AOC 4th Lowest | |
| 5 | L5₹45.4 L+₹2.1 L (4.91%)Rejected-AOC | L5 | Rejected-AOC 5th Lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
11 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR TO BLDG NO T18 24 OF ASC BN MT ADDN ALTN TO BLDG NO T87 AT TAC AF AND COVERED DRAINAGE SYS OF FAMILY WARD AND DELIVERY SUIT OF MH UNDER AGE BR II AT RMS
2023_MES_581799_1
8519/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹84,000
17 Mar 2023
20 Feb 2023
13 Mar 2023
20 Feb 2023
11 Mar 2023
6 Mar 2023
20 Feb 2023 - 27 Feb 2023
Amount
B/R PORTION Dismantling plain or corrugated steel sheeting, any gauge, thickness,including Nanital or similar pattern roof covering complete all as specified and as directed.
Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed .
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m each Ditto but with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkats or frames with shutters with exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm but not exc 2.00 Sqm each complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling of frame work timber scantling 40 Sq cm and over in section in any position complete all as specifed and directed.
Dismantling of frame work timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section ® complete all as specifed and directed.
Demolition of reed, lathing, single or double, including battens and olaster or chicken wire lathing complate all as specified and as directed.
Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engineer-in-Charge.
M&L Cement concrete in foundations, filling and mass concrete in 1:3:6 type C2, using 40mm graded stone aggregate complete all as specified.
M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface.
S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws complete all as specified and as directed.
all as per Item No 20 here-in-before but plain sheet as in ridges, roof covering or in cladding etc complete complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame etc complete all as specified and as directed.
M & L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) 25 mm thick as in sub base to receive tiles finishing cement concrete surface even and smooth without using extra cement etc complete all as specified and as directed.
M&L for dark shade Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. set and jointed in neat cement slurry over screed bed of 15 mm thick in CM1:6 and pointed in white or coloured cement to match etc complete all as specified and as directed.
All as per Item No 26 here-in-before but on vertical surfaces such as skirting over screed bed of 15mm thick in CM 1:4 and pointed in white or coloured cement to match etc complete all as specified and as directed.
M&L for dark shade Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. set and jointed in neat cement slurry over screed bed of 15 mm thick in CM1:6 and pointed in white or coloured cement to match etc complete all as specified and as directed.
All as per Item No-28 here-in-before but on vertical surfaces such as skirting over screed bed of 15mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified.
M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over screed bed of 15mm thick in CM 1:4 and pointed in white or coloured cement to match etc complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and mirror polishing including 15mm screed bed or bedding layer in 1:4 CM complete all as specified as directed
All as per Item No-31 here-in-before but on vertical surfaces over 15mm screed bed or bedding layer in 1:3 CM complete all as specified and as directed by Engineer-in-Charge.
M&L for 18-20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer-in-Charge.
M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.
M&L Granite (of any type) 20mm thick machine cut, as in skirting/dadoes, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in vertical surfaces over 20mm thick screed bed in CM (1:3) complete all as specified and as directed by Engineer-in-Charge.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engineer-in-Charge.
Fixing only in other opening Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.
Fixing only in other opening factory made panelled shutter 35mm thick B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.
M&L Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.
M&L Flush shutters 35mm thick , solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge.
S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in-Charge.
S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge.
All as per item No 42 here-in-before but in repairs complete all as specified and as directed.
S&F 200 mm long aluminium anodised, barrel tower bolt of extruded sections complete all as specified and as directed by Engineer-in-Charge..
S&F 150mm long aluminium alloy handled, fabricated type anodised complete all as specified and as directed by Engineer-in-Charge..
Preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge..
All as per Item No 46 here-in-before but on old surfaces complete all as specified and as directed.
S&F 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller complete complete all as specified and as directed by Engineer-in-Charge..
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
All as per Item No-50 above but in half brick thick wall built in CM 1:4 complete all as specified and directed by Engr-in-charge.
M&L for Rendering 15mm thick cement plaster in CM 1:6 on brick work/concrete surfaces finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and fair with WPC @ 2% by weight of cement content and without using extra cement complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping, back filling, bed plates including necessary formwork complete all as specified.
Formwork to chajjas including edges for flat rough finished surfaces complete all as specified and as directed.
M&L RCC M-30, 1:1.5:3, type B-1,( Nominal mix) as in chajjas complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.
M&L for TMT steel bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm.complete all as specified and as directed.
All as per item No 58 here-in-before but above 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed. .
S&F Anodised aluminium powder coated ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete as as specfied
S&F for providing sliding type (3 Track +3 shutter) aluminium windows, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19, aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall b provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Alom extrusions etc all as listed. Note:- Glazing and Stainless steel wire mesh will be paid seperately.
S&F Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified
S&F Floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring , fixed in floor , overall length of cover plate 140mm complete all as specified and as directed.
M&L for Second class clean sawn hardwood in scantling fixed in timber framed work complete all as specified
M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or breads sectional area exc 3 sqcm but not exc 6 sqcm complete all as specified and as directed.
Supply and fixing in repair 0.71 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams etc, including all laps cutting and waste complete all as specified and as directed.
Welded steel wire fabric weight not exc 4.00 kg per Sqm supplied and fixed complete to wood or steel members complete all as specified and as directed.
Material and labour for rendering 15 mm thick plaster in cm (1:4) with using water proofing compund on one side of lathing finished even and smooth with out using extra cement cpmlete all as specified and as directed.
Material and labour for rendering 15 mm thick plaster in cm (1:6) other side one side of lathing finished even and smooth with out using extra cement cpmlete all as specified and as directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping, back filling, bed plates including necessary formwork complete all as specified.
Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.
S&F for joist, channels, angles, or tee sections, fixed independently, without connecting plates, etc, (cut to ordinary lenght i.e. Within 20mm of the lenght indicated conforming Fe-410-W (Gde E-250 quality -A) complete all as specified and directed by Engr-in-charge..
S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0 complete all as specified and as directed..
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed.
S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W complete all as specified and directed by Engr-in-charge..
S&F bands, straps or stays , plain angle cleats or flat irons cleats or securing purlins to wooden trusses or rafters, knee pieces and similar small articales etc conformings to Fe-290 Grade E-165 complete all as specified and directed by Engr-in-charge.
S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia complete all as specified and as directed.
M&L Two coats of OBD on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.
M&L Two coats of Cement base paints on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.
Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L one coats of OBD on old plastered surfaces of walls including preparation of old plastered surfaces complete all as specified and as directed by Engr-in-Charge.
M&L one coats of cement base paint on old plastered surfaces of walls including preparation of old plastered surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for plain cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in roof kerb complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
S&F in replacement of 500 ltr capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ), including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), all specified in SSR Part-I complete all as specified & directed.
M & L 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards complete all as specified and as directed..
M&L two coat synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any des-cription, over 10cm in width or girth, not otherwise described complete all as specified and as directed.
All as per Item No 88 here-in-before but on old surfaces complete all as specified and as directed.
M&L for grinding to kota stone in three coats and final coat as mirror polishing to existing kota stone complete all as specified and as directed
S&F 20mm Tubes, 'medium grade', galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.
Excavation In trenches n. exc 1.5,m wide and n. exc 1.5m deep and getting out in soft loose soil complete all as specified and as directed.
M&L for Precast factory made manhole cover/Drain covers with plain faces using RCC 1:2:4 type B-1 and set in CM 1:4 including formwork etc of required sizes complete all as specified and as directed by Engineer-in-charge.
Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc. complete all as specified and as directed.
Add for additional 25mm inner girth or under girth 30cm etc complete all as specified and as directed.
Returning, filling in incl spreading, levelling, watering and well ramming in layers n.exc.25cm thick complete all as specified and as directed..
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
E/M PORTION Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
One light/Fan pointcontrolled by one, one way switch etc complete all as specified and as directed.
One 3 pin socket outlet 5 Amps on the same board with other switches etc complete all as specified and as directed.
One 3 pin socket outlet 5 Amps on the switch socket combination etc complete all as specified and as directed.
All as per item No 99 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed. Make : Anchor/Legrand/Havells
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed.Make : Anchor/Legrand/Havells
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.Make : Anchor/Legrand/Havells
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush typeetc complete all as specified and as directed. Make : Anchor/Legrand/Havells
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc etc complete all as specified and as directed. Make : Anchor/Legrand/Havells
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.Make : Anchor/Legrand/Havells
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme/Richa
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 6 Sq mm and one run of 6 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 6 Sq mm + one run of 6 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme/Richa
Taking down S&F for LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Geaves/Havells/Bajaj/ Philips.
Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge.Make : Crompton Geaves/Havells/Bajaj/ Philips.
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Crompton Geaves/Havells/Bajaj/ Philips.
Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make : Crompton Geaves/Havells/Bajaj/ Philips.
M&L for VTPN 4 way,double door 415 Volts, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs incl taking down of DBs complete all as specified and as directed. Make : Legrand /ABB/Siemens
Supply and fixing MCCB 3 Pole .415 Volts fixed type, 25 to 100 Amps with breaking capacity 16 KA complete with connection testing and commissioning all as specified and as directed. Make : Legrand /ABB/Siemens
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make : Legrand /ABB/Siemens
M&L for MCB SPN 40 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand /ABB/Siemens
M&L for MCB SP 6-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand /ABB/Siemens
M&L for MCB SP 6-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand /ABB/Siemens
Taking down Ceiling fan/ Exhaust Fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.
M&L for replacement of capacitor2.5 Mfd incl making electrical connection complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed.
M&L for copper rewinding for suitable size complete to the existing ceiling fan/Exhaust Fan complete all as specifed and as directed.
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 35 sq mm, 3.5 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Richa/Havells/Finolex
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Richa/Havells/Finolex
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed.
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make : Jindal/TATA/Surya Prakash
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.
PERFECT BUILDERS AND SUPPLIERS
SHRI HRIDAY NARAIN GIRI
SHRI RAJNATH SINGH
KAILASH KUMAR LADHA
M/S RAHUL TRADING CO.
M/S Lucky Builders
m/s chakraborty enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .