SPECIAL REPAIR TO BLDG NO 27/B, PROVN OF WATER SUPPLY AND WATER DRAINAGE FOR NFS, ADDN/ALTN OF OLD SEWAGE LINE OF JCOS/OR MD ACCN OF 1ST MED REGT AND CERTAIN REVENUE AND MINOR WORKS AT MIL STATION AJMER UNDER GE NASIRABAD

Amount

Demolition of plain cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description, complete, all as specified & directed.

M&L for machine cut Kota stone slab flooring 20 to 25mm thick & 550x550mm size, laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified & directed.

M&L for machine cut Kota stone slab 20 to 25mm thick on vertical surfaces such as dado, skirting, cills etc. laid over & including screed bed or bedding layer of 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified & directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in sirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed backing in cement & sand mortar 1:4 complete, all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in sub base/levelling course of flooring, finished even and fair, complete, all as specified & directed.

Demolition of plain cement concrete/lime concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified.

M&L for PCC 1:5:10 type E2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete, complete, all as specified & directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic & sand (1:3).

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry, concrete or stone masonry surfaces of walls, finished even & smooth without using extra cement, complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces of stone masonry surfaces of walls, finished even & smooth without using extra cement, complete all as specified.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of acrylic washable distemper of approved shade/tint over a coat of primer over & including 1mm thick white wall care putty on wall surfaces, complete, all as specified & directed.

M&L for rough cast plaster over 15mm thick in rendering in cement mortar 1:4 on fair faces of brick/stone masonry, wall surfaces, complete all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces in ceiling, chajjas, isolated width etc., finished even & smooth without using extra cement complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling, surfaces., finished even & smooth without using extra cement, complete all as specified.

M&L for rendering 15 mm thick in cement mortar 1:3 mixed with water proofing compound (ISI marked) on fair faces of brick/stone masonry or concrete surfaces in sunken portion/roof treatment, with Neeru finish including two coat of acrylic polymer treatment as per manufacturer's instruction (Make: CICO, or equivalent as approved)) complete all as specified.

M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint, complete all as specified & directed.

Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.

S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

M&L for 18/19mm thick block board, Grade 2 quality, interior grade, commercial type and both faces covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick and all around side faces is covered with decorative lipping, complete as in cup board shutter and fixed with wooden frame work, complete, all as specified & directed.

M&L for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, fixed with screws, sectional area exc 13 sqcm and not exc 25 sqcm as in cupboard chowkhat & frame fixed with glue, pinned at joints and fixed with screws,complete, all as specified & directed.

M&L for 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in pelmet box, shelves, Kitchen cabinets etc complete all as specified & directed.

S&F brass body magnetic catches with striking plate including letting in complete, all as specified & directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws.

M&L for add extra for 6mm thick external teak wood lipping 18/19mm and fixed with nails.

Supply & fixing hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F aluminium handle, 100mm size, cast type, anodized (ISI marked) complete all as specified.

S&F in repairs factory made steel windows/ventilator glazed & gauged (combination) with side hung/top hung shutters including box type/projecting type hinges and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete including cooler opening arrangement in window & guard bars, complete, all as shown in drg No. CEBZ/TD/11 Sheet 1/7 to 7/7.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete, all as specified & directed.

S&F in repairs 22mm bore MS powder coated tubular curtain rail, fixed to PVC rawl plugs with chromium plated brass screws, complete, all as specified & directed.

S&F in repairs MS powder coated brackets for tubular curtain rail 22 mm bore, fixed to PVC rawl plugs & chromium plated brass screws, complete all as specified.

M&L for 16 to 18mm thick Granite (of any type) slab of approved shade as in steps, jambs, pillars, window cills, cooking platform and the like , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing as per local trade practice) over & including 15mm thick screed bed (bedding layer) in CM 1:4 all as specified & directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Supply & laying CPVC pipe of 15mm bore, SDR 11 & plain CPVC SDR fittings in trenchesetc. Complete, all as directed.

Taking up or down steel water tubing and connections of 20 mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Supply & laying CPVC pipe of 20 mm bore, SDR 11 & plain CPVC SDR fittings in trenchesetc. Complete, all as directed.

Taking up or down steel water tubing and connections of 25 mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Supply & laying CPVC pipe of 25 mm bore, SDR 11 & plain CPVC SDR fittings in trenchesetc. Complete, all as directed.

S&F 25 mm bore Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe, complete, all as specified & directed.

S&F 20 mm bore Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe, complete, all as specified & directed.

All as per description of serial item No. 47 above but fixed in repairs.

S&F in repairs 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, ISI marked, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F in repairs 15mm bore Stop valve, cast copper alloy, fancy type chromium plated, ISI marked, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F 15 mm bore bib tap, cast copper alloy, ISI marked,chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule.

S&F brass chromium plated shower rose 125mm size with or without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.

All as per description of serial item No. 52 above but fixed in repairs.

S&F soap dish, vitreous china, white, approximate size 160x160x90mm fixed to plugs with chromium plated (CP) brass screws.

S&F brass tubular towel ring, chromium plated with flange (Cat Part No T-6002A1 of make – Parryware or equivalent from other specified make in PS.

S&F in repairs brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.

S&F in repairs brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.

S&F PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, PVC connection etc, complete all as specified & directed.

All as per description of serial item No. 60 above but fixed in repairs.

All as per description of serial item No. 62 above but fixed in repairs.

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink.

S&F in repairs stainless steel Kitchen plate rack of overall minimum size 765x920x220mm deep of approved make, with partitions for small/large plates etc made out of 0.63mm thick stainless steel sheet, fixed with rawl plug and CP steel screws all as directed.Note : Weight of rack shall not be less than 8.00 Kg.

Taking down rainwater pipes , waste pipe or gas pipe (any size or pattern), in any position, including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store, complete, all as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified& directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified& directed.

S&F 110mm bore PVC (SWR) bend, any radius with access door.

S&F 75 mm bore PVC (SWR) bend, any radius with access door.

S&F 75mm bore PVC (SWR) vent cowl.

S&F PVC (SWR) Gully trap 150/110mm, setting in PCC and jointing with solvent cement, complete all as specified & directed.

S&F PVC (SWR) floor trap/multi trap, plain with PTMT grating including jointing with solvent cement, diameter of outlet 75mm, complete.

S&F mild steel framed work such as grills, guard bars, barred iron doors, cooler stand, framework of water tanks and similar works, conforming to Grade E-165 (Fe 290), including welding etc. complete all as specified & as directed.

Demolition of cement concrete (unreinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.

M&L for reinforced cement concrete 1:2:4 , type B1 grade using 20mm graded crushed stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span and the like including necessary formwork, complete, all as specified & directed.

M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

All as per serial item No. 77 here-in-before but 8mm dia.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete, all as specified & directed.

Surface dressing not exc 15cm deep in any type of soil.

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in soft/loose soil.

All as per serial item No. 83 here-in-before but depth exc 1.5m and not exc 3m.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete.

M&L for cement concrete (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement. Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 complete all as specified & as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc 20mm, lime or sand stone.

M&L for 40mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in damp proof course on horizontal surface using water proofing compound including necessary formwork. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for 50mm thick sand stone slab, set and jointed over joist, etc, complete in cement mortar 1:4 complete, all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:4 on roof top surfaces, finished even & smooth without using extra cement complete all as specified & directed.

M&L for APP modified polymeric water proofing membrane, 3 mm thick having centre core not less than 100 micron high molecular high density polythelene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.2 Kg/Sqm over bitumen primer conforming to IS-3384 @ 0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @ 1.2 Kg/Sqm over APP membrane with all overlaps, complete, all as specified & directed.

M&L for 40mm thick (Minimum consolidated thickness) type B0 using 12.5mm graded stone aggregate as in padding even and smooth without using extra cement with existing slope with 'V' shaped grooves 6mm wide and 10mm deep @ 0.40 Sqm of each panel on top of padding and filled with mastic bitumen of 1:1 proportion, complete, all as specified & directed.

Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick. Note :- Soil obtained from excavation under serial item No. 76 here-in-before shall be used for filling under floors.

M&L for 75 mm thick PCC (1:4:8), type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 5mm thick in cement mortar 1:4 over 10mm thick rendering in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

S&F factory made solid PVC door frame of size 75mmx45mm made out of 5mm wood grain printed single piece extruded PVC profile reinforced with MS square tube in opening & edges shall be painted to match with printed sheet as per specifications.

S&F factory made solid panel PVC moulded door shutter with particle board core, 28 to 30mm thick (styles) with 2 raised panel design with 2 mm thick moulded PVC sheet on front face & 2mm thick plain colour PVC frame sheet on back face and fixing in frame at site, complete, all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified

S&F aluminium handle, 150mm size, fabricated type, anodized (ISI marked) complete all as specified.

S&F factory made pressed steel ventilator conforming to IS-1038 with top hung shutters including box type hinges with steel peg stay and handles complete, dovetailed, welded including fixing of lugs in PCC 1:2:4, type B-1 & making good walls & cills to match the existing surface, complete, all as specified & directed.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the surfaces, complete all as specified.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified.

M&L preparation of newly plastered surfaces of walls and applying three coats of white wash over & including 1mm thick white wall care putty , complete, all as specified & directed.

M&L preparation of newly plastered surfaces of ceiling surfaces and applying three coats of white wash over & including 1mm thick white wall care putty , complete, all as specified & directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & as directed.

S&F vitreous china wash hand basin, white, flat back of size 630mm x 450mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.

S&F 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule.

S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.

S&F 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F 15mm bore angle stop valve fancy type of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F soap dish, PVC coloured of approved pattern complete, all as specified & directed.

S&F brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F Jet spray chromium plated brass for EWC with & including PVC connection 1.50m long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F brass chromium plated shower rose 125 mm size with swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified & directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified & directed.

S&F 110 mm bore PVC (SWR) junction single (single ‘T’), equal or unequal with access door.

S&F 110 mm bore PVC (SWR) vent cowl.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed.

M&L for 1:3:6, type C1 using 20mm graded crushed stone aggregate) as in coping, bed blocks, holdfast etc, including weathering slightly rounded or chamfered angles and throating including use & waste of form work, complete, all as specified & directed.

M&L for 40mm thick sand stone slabs, set and jointed over joist etc in CM 1:4 as in base of water tank including 25mm thick PCC 1:2:4, type B0 using 12.5mm stone crushed aggregate (for providing bottom base of PVC tank) complete, all as specified & directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete.

Formwork to edges of concrete flats, roofs, floors etc and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces.

Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete.

M&L for reinforced cement concrete 1:2:4, type B1 using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like.

M&L for reinforced cement concrete 1:2:4, type B1, using 20 mm graded crushed stone aggregate as in beam, cantilevers, bressummers, lintels over 1.5m clear span, etc, complete, all as specified & directed.

M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for preparation of newly plastered surfaces of wall surfaces & applying three coats of white wash complete all as specified.

S&F 15mm bore, pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes.

Extra for forming fair finished drain or channel 55 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. (Note: Only Inner girth shall be measured.)

M&L for 75 mm thick PCC 1:2:4 type B2 using 40mm mm graded crushed stone aggregate as in flooring, finished even and fair, complete, all as specified & directed.

M&L for loose filling with aggregates of broken bricks of gauge 80 to 150mm in soakage pits, soakage well, complete, all as specified & directed.

Supply and laying 100 mm bore cast iron,pipes with spigot and socket ends centrifugally cast, class LA in any length, laid in trenches or floors complete all as specified.

S&F salt glazed stone ware drain pipes of 100mm bore, grade `A’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified.

S&F salt glazed stone ware drain pipes of 150mm bore, grade `A’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified.

S&F salt glazed stone ware drain pipes of 200mm bore, grade `A’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified.

Material and labour for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to SGSW drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and as directed.

All as per description of serial item No. 145 above but for 200mm bore pipe.

S&F 110 mm bore Cast iron vent cowl.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings, laid in trenches/fixed to wall, completed, all as specified.

M&L for precast RCC 1:2:4, type B1 grade using 20mm graded crushed stone aggregate as in manholes covers, cover slabs of drains and similar works including placing in position and set in CM (1:4) complete all as specified & directed.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in coping, benching rounded or chamfered on ends including necessary formwork.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, necessary welding etc. conforming to Grade E-250 quality `A’ all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.

Removal of excavated soil/ material to a distance exc 1.5 KM but not exc 5 KM and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

Excavation in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in soft/ loose soil.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L for factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

S&F mild steel framed work using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet for ridges of 0.50mm thick of an colour having tensile strength of 550 MPs as in roof covering/claddingto wall, fixed with self tapping screws, complete all as specified & directed..

S&F in repairs stainless steel Kitchen plate rack of overall minimum size 920 mmx785 mmx285 mm deep of approved make, with partitions for small/large plates etc made out of 0.63mm thick stainless steel sheet, fixed with rawl plug and CP steel screws all as directed.Note : Weight of rack shall not be less than 8.00 Kg.

S&F rolled mild steel work as in Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment including necessary welding etc. conforming to Grade E-165 (Fe 290) all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long and dia of neck 5 to 10 mm complete all as specified.

M & L for point wiring complete with 1.5 sqmm single core multi stranded copper conductor ISI marked PVC insulated unsheathed cable 1100 volts grade drawn through and including PVC non metalic rigid conduit & conduit accessories not less than 20mm dia concealed in Wall / roof / ceiling with PVC sleevel dash fasteners / wooden gutties and cadmium plated screws as per IS including sunk type MS anodized terminal boxes with 3 mm thick PVC laminated sheet concealed in wall etc including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly for one light/fan point controlled by one, one way, SP, 5 Amps switch

All as per description of item No. 163 above but for one socket outlet 5 pin, 5 Amps on the same board

All as per description of item No. 163 above but for one socket outlet 5 pin, 5 Amps on the Independent board

All as per description of item No. 163 above but for one socket outlet 5 pin, 15 Amps controlled by 15 Amp awitch with 2.5 Sqmm cable.

S & F switch piano, flush button, 15 Amps, single pole one way complete all as specified and directed.

M&L socket outlet 15 amps, 6 Pin, flush type complete all as specified and directed

S & F switch piano, flush button, 5 Amps, single pole one way complete all as specified and directed.

M&L socket outlet 5 amps, 5 Pin, type complete all as specified and directed.

S&F Batten lamp holder, PVC / polycarbonate type wirth back plate suitable for batten fittings. Make: SSK Code No PC 577 or equivalent from CONA/ ANCHOR

S / F ceiling rose, surface bakelite 65x 17.5 mm, three terminal complete all as specified and directed.

S&F LED tube light fitting retrofit batten in acrylic linear tube single LED tube light including 1 x 18/20 W LED retrofit bar professional CW 6500 K cover channel, bipin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling (1x 18 watt), 230V for rose complete all as specified and directed. Make: Bajaj Code No BLRB-DB 118 & BLRB 18W CW or equivalent fromPhilips / Crompton greaves

S&F Exhaust fan 300 mm sweep with louvers, fancy type, 230 volts, 50 Hz along with necessary connection and fittings, including making round hole of appropriate size in wall for mounting exhaust fan with louvers, making good the disturbed surfaces with existing finishes , complete all as specified and directed. Make: -Crompton / Bajaj / Havells.

S&F LED mifror light fitting, 1x 5W, attractive wall / ceiling mõunted type with metallic channel and white reflector, suitable for mirror fittings with complete with all accessories pre-wired andiincluding connecting up with twin core twisted flexible copper conductor cable. with suitable size for connection from ceiling rose to mirror light fitting complete all as specified and directed. Make: Bajaj Model No BCLSB 05 WH LED or equivalent from Havells /Crompton greaves.

Supply, Installation, testing and commisioning of water heater storage type, 25 Ltrs capacity, electric suitable for single phase, 50HZ, AC supply, 5 star rating , including minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC shethed, three pin plug top complete all as specified and directed. Make: Bajaj/Crompton/Racold.

S&F LED light fittings, 1x 10 W bulk head luminaries, with lamp etc complete with all accessories and including connecting up with three core copper conductor cable of suitable size of 230V, 50 Hz, including taking down old existing unserviceable bulk head light fitting of any type and size, complete all as specified and directed. Make: Bajaj Code No BIBWP 10W LED or equivalent from Havells /Crompton greaves

MITTAL ENTERPRISES

VIPRABANDHU CONSTRUCTIONS

M/s Kishan Gopal Agarwal