Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹24.2 L |
Tender Value
₹32.7 L
EMD Value
₹65,500
Closing Date
9 Mar 2026, 3:00 pmClosed
KUMAR CHAITANYA
SE CIVIL BSPTCL
4TH FLOOR VIDYUT BHAWAN PATNA
Anjani Kumar
CE CIVIL BSPTCL
Construction of boundary wall in Northern & Southern of switchyard at GSS Chandauti, Gaya.
124962
04/PR/BSPTCL/2026-07
Open Tender
CIVIL
Patna
• NAME OF BIDDER
• ADDRESS
• CONTACT NO. AND EMAIL ID
CIVIL
PERCENTAGE
L1
1
10 documents required · 10 mandatory
₹5,900
Processing Fee: 590
₹65,500
14 May 2026
13 Feb 2026
9 Mar 2026
14 Feb 2026
9 Mar 2026
14 Feb 2026
Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar
Demolishing cement concrete work including disposal of material within 50 metres lead: 1:3:6 or richer mix
Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead
Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead including all lifts , all complete as per approved disign and direction of E/l
63 CM (25) UNDER -REAM Making 63 cm (25) dia under ream at required with hand auger of approved quality in ordinary soil (vide classification of soil ifem - A) true to plumb and without eccentri city in my stage of opration and disposal of the excavated earth up to 50 mts lead including all lifts , all complete as per approved design and direction of (E/l)
Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete
Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l
Providing & laying in position Specified grade of reinforcement cement concrete excluding the cost of centring ,shuttering,finishing and reinforcement-All work up to plinth level. (a) 1:1.5:3( 1Cement:1.5Coarse Sand:3gradede stone aggregate 20mm,nominal size.
Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.(a) 1:1.5:3(M20)
Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V
Cement plaster in course sand 12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand)
Providing 15 mm cement plaster on rough side of single or half brick wall of mix -1:6 (1 cement: 6 coarse sand)
Providing and fixing in position of Reinforcement for RCC work including straightening,cutting,bending and binding etc.Thermo-Mechanically Treated bars(FE-500)-10 mm
Providing and fixing in position of Reinforcement for RCC work including straightening,cutting,bending and binding etc.Thermo-Mechanically Treated bars(FE-500)-12 mm
Providing and fixing in position of Reinforcement for RCC work including straightening,cutting,bending and binding etc.Thermo-Mechanically Treated bars(FE-500)-8 mm
Centring and shuttering including strutting, propping etc. And removal of form for lintels, beams, Plinth Beam, griders, bressumers and cantilevers.
Centring and shuttering including strutting, propping etc. And removal of form for Columns,Pillars, Piers, Abutments, Posts and Strut
Centring and shuttering including strutting,propping etc. and removal of form for.Foundations, footings, bases of columns etc. for mass concrete
Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as requiredIn gratings, frames, guard bar, ladders, railings, brackts. gates & similar works.
Providing galvanized steel barbed wire
Labour for fixing and fitting barbed wire fencung in six rows horizontal and two rows diagonal
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement Primer
Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)
Painting with aluminum paint of approved brand and manufacture to give an even shade. (a) over new steel work(Two or more coats)
Providing labour for cleaning the heap of Garbage ,throwing of demolished materials beyond provided carriage of 50m,cutting of roots of tree during exacavation etc. purning of branches before/after the work as per site.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Dismantling expanded metal or R.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead.
Description
Carriage cost of materials
Bricks (1Km + 7 km)
Local sand (1 km + 2 Km )
Coarse sand (15Km )
Stone chips (43 Km )
In fig
Local Sand
Coarse sand
Aggregate
aoc.json
Purchase Order
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
F2 Terms & Conditions final.docx
NIT • 0.40 MB
F2 Terms & Conditions final.docx
NIT • 0.40 MB
NIT 04 2026.pdf
NIT • 0.64 MB
Chandauti Gaya Boundary wall BOQ ..xlsx
NIT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .