Electrical works EPF office in 2nd Floor GMTD Shillong

Amount

Supplying of following size PVC sheathed PVC insulated armoured aluminium conductor XLPE UG cable of 1.1KV Grade as per standard specifications etc., as reqd.(M/s Havells or Superior make)

a) 3½core50sqmm

Laying of following size PVC sheathed PVC insulated armoured aluminium conductor UG cable of 1.1KV Grade on surface of wall including saddling, painting / in existing cable duct including opening and closing of cover, making good the damages etc., as reqd.a) 3½core50sqmm

Supplying and making of following size End termination with brass compression gland along with lugs for alu cond. UG Cable etc as required a) 3½core50sqmm

Supplying and Fixing 10-60A 3phase 4 wire Digital Energy meter suitable for working on 440V 50Hz AC supply in existing SMC Meter box etc as reqd (M/s L&T model WR301BC7D10 or superior make)

Supplying and Fixing of SMC box on surface of wall suitable for above 60A Digital Energy meter etc as reqd (M/s Syntax or superior make)

Supplying and Fixing of following size copper wire, cable in existing conduit/ casing and capping, supplying and fixing of casing and capping, PVC flexible pipe etc., as reqd a) 2x1.5sqmm

b) 2x2.5sqmm

c) 2x4sqmm

d) 4x10sqmm

e) 4x16sqmm

f) 25mm PVC casing/capping

g) 32mm PVC Flexible pipe

h) 6 SWG GI wire from Raising main to TPN switch

Supplying and Fixing of 100A TPN switch with porcellain fuse units in MS enclosure suitable for working on 440V 3phase 50Hz power supply including cable terminations with suitable size lugs etc as required (M/s Havells or Superior Make )

Supplying and fixing following rating 2pole, 4 pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required (M/s MDS or Superior make) a) 63A 4 pole

b) 40A 2 pole

Supplying and fixing 6A/16A/32A rating, 240 V, 10 kA, “C” curve, single pole miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required(M/s MDS or Superior make)

Supplying Fixing of Bus bar chamber box with 100A 4pole 3 phase and Neutral Aluminium bus bar along with accessories etc as required (M/s Indo Asian model CPPI 1025 or superior make)

Checking and restoration of faults in light point wiring, lighting circuit wiring, light fittings, fans, switch boards, MCB boards including testing, retermination of wiring, tightening of lose connections in DB and restoring supply and commissioning etc.as required ( in 2nd Floor as per existing inventory verified in coordination with Engineer in charge)

Checking and Rectification of faults in power circuit wiring for 5A, 15A, sub main wiring, MCB boards, including testing, retermination of wiring, tightening of lose connections in DB and restoring etc.as required ( in 2nd Floor as per existing inventory verified in coordination with Engineer in charge)

Supplying & fixing of following switches, sockets, angle Holder, vertical holder, LED Lamps, Electronic ballast, FL tube, phenolic sheet, etc suitable of working on 230V, Single phase AC supply etc, as reqd (M/s Anchor or superior make) a) 5/6 amps switch

b) 15/16 A switch

c) Bell Push

d) pin 5/6 A socket outlet

e) 6 pin 15/16 A socket outlet

f) PVC Batten straight/Vertical lamp holder

g) PVC Batten Angle lamp holder

h) Electronic Ballast for FL fitting

i) 36w 4ft FL tube

j) 9W LED Lamp

k) 3mm phenolic hylum sheet 10''x7''/ 6"x8"/5"x7"/4"x6" size with screws

l) Closing of False Ceiling with 6mm Marching color sheet of size 300mmx600mm aprox

Supplying and fixing of 230mm sweep exhaust fan along with external Mesh guard suitable for working of 230V 50Hz Ac supply including removing of old faulty fans etc as required (M/s Havells Almonard/Crompton or superior make )

Supplying and fixing of 38mmx5mm MS flat for fixing of exhaust fans including drilling hole, painting etc as required

Supplying and fixing of 20W 4ft LED fitting suitable for working of 230V 50Hz Ac supply directly on ceiling etc as required (M/s Phillips/Bajaj/ Havells or superior make )

Dismantling of 15 ltr geyser units along with accessories including Closing of geyser power point with hylum sheet, handing over to Engineer in charge etc as required

Dismantling and shifting of 2x40W/1x40W box type fitting on ceiling including making good the damages etc as reqd

Dismantling and shifting of 2x40W/1x40W box type fitting on ceiling including making good the damages etc as reqd

Making hole in 230mm depth wall for cable entry including plastering and making good the damages etc as reqd

Power supply connection from Existing MV panel, Removing of cable connection from the old Distribution box including checking of power supply to power and lighting MCB DB, arranging for power shut down and re-commissioning etc as reqd

Making clearing of duct from panel room to raising main including removing of soil accumulated, debris along with duct aprox 18mtr length including removing and re-fixing of duct cover etc as reqd