Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 LAccepted-AOC H NO B III 95 MOHALLA GHARTHOLI MISSION ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being lowest bid. | |
| 2 | L2₹15.9 L+₹18,698 (1.19%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹15.9 L+₹18,848 (1.20%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bid. | |
| 4 | L4₹17.3 L+₹1.6 L (10.3%)Rejected-Finance 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Other than lowest bid. | |
| 5 | L5₹17.9 L+₹2.2 L (13.8%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bid. |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
2 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN
COMPREHENSIVE MAINT AND REPAIR TO B/R ITEMS IN BHASKAR-II UNDER AGE B/R-II OF GE (SOUTH) MAMUN
2022_MES_550109_1
GE(S)/M-26/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SOUTH MAMUN
AS PER NIT
8 documents required · 8 mandatory
₹500
GE SOUTH MAMUN
₹40,000
Yes
10 Nov 2022
5 Sept 2022
10 Oct 2022
5 Sept 2022
2 Oct 2022
19 Sept 2022
Amount
M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as surface channels and drains complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6 including demolition of reinforced cement concrete, complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.
M&L for form work to flat, rough finished surfaces of concrete of chullah hoods, chajjas, balcony railing troughs and similar works (Horizontal or sloping) including edges complete all as specified and directed.
S&F pre-laminated lead free factory made 18mm (+ 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cbm and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed.
S&F 40mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.
S&F Solid PVC door frame wooden high density filament (HDF) double rebated of size 50mmx95mm processed with polymer fins and different wood fibre, fixed to opening including necessary lugs/hinges, lock strike plate etc complete all as specified and directed.
S&F 35mm thick Factory made UV wood grain printed panelled/plain PVC single piece door shutter style, consisting of frame made out of MS tube 19 guage thickness & size of 25mmx25mm for stiles, top and bottom rails. MS frame shall have a coating of steel primer, the frame shall covered with heat moulded wood grain UV printed PVC sheet tap fixed in MS frame welded to the stiles and rails with suitable PVC sheet beading and jointed togetherwith solvent cement, fixing in frame at site complete all as manufacturer's specifications and ditrected by Engineer-in-charge.
S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F "as in repair" 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F "as in repair" 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
S&F "as in repair" 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
S&F 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F "as in repair" 20mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.
S&F GI wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with wooden beading/tinned tacks/galvanized wire staples, complete all as specified and directed.
S&F "as in repair" GI wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-27/13 sheet 1/4 to 4/4.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
S&F tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube (ERW or induction butt welded ) upto 60mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.
S&F tubular purlins fixed independently made out of medium grade tube (ERW or induction butt welded ) upto 40mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, jointing plates and two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.
M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in ridge/valley , gutter or straight flashings etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or colour) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.
M&L PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) average thickness 50mm over including dismantling of existing bricks/tiles as complete all as specified and directed.
M&L for 20mm thick cement plaster on roof top in cement mortar 1:4 on concrete surfaces, finished even and smooth without using extra cement including and mixing with WPC @ 0.200ltr/ 50 Kg bag of cement, complete all as specified and directed.
M&L for 40mm thick brick tiles laid on 15mm thick cement plaster on roof top in cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane including dismantling of existing brick tiles, complete all as specified and directed.
M&L for 40mm thick brick tiles (EXCEPT TILES) laid on 15mm thick cement plaster on roof top in cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane including dismantling of existing brick tiles, complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors, complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.
M&L for 40mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors laid in panels n. exc. 2.5 Sqm with top finished the surface even and smooth using extra cement including glass dividing strips as per site requirement complete all as specified and directed
M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L interlocking paver block of any shape of 60mm thickness, M-35 Grade, (EXCEPT BLOCKS) laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Machine pressed precast coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick (table rubbed and polished) as in cooking plateform, window cills, jambs, steps and like over and including 15mm thick screed in CM 1:4 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edges full round, and making hole for gas pipe, complete all as specified and directed.
M&L for repair work of machine cut kota stone slab flooring/ treads of steps 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges (if required) complete all as specified and directed.
M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying two coats of white wash, complete all as specified and directed.
M&L for preparation of old surfaces of ceiling including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying two coats of white wash, complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and applying 2mm thick wall care putty for making the surfaces smooth and applying two coats of oil emulsion distemper, complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.
M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and making the surfaces smooth and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, including hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.
S&F 3mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed with oil putty, including hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.
M&L for preparation of new surfaces of wood & wooden of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.
M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
S&F "as in repair" 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
S&F "as in repair" PVC ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed.
S&F "as in repair" syphonic action kit for PVC flushing cistern of 10 Ltrs capacity, complete all as specified and directed.
S&F "as in repair" Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.
S&F "as in repair" CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.
S&F "as in repair" chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.
S&F "as in repair" PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F LDPE waste pipe, 32mm dia, suitable for WHBs/Sinks, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.
S&F "as in repair" stainless steel Grating doom 100mm dia, fixed in floors complete all as specified and directed.
S&F "as in repair" stainless steel Grating doom 100mm dia with waste hole, fixed in floors complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, laid or fixed to walls, including stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, laid or fixed to walls, including stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.
S&F "as in repair" stainless steel kitchen plate rack of size 750mmx900mm, made of stainless steel 1mm thick, fixed with plastic plugs and mild steel screws, complete all as specified and directed.
S&F "as in repair" Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover for pedestal pan and connecting etc, complete all as specified and directed.
S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.
S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.
Cleaning and removing all inaccessible roof and wall vegitation and plants after cutting & removing from roots and removing the same out of MoD land complete all as specified and directed.
Cleaning and removing all scale and dirt etc. from water tank and from mouths of circulating pipes without disconnecting tank of capacity exc 250 Ltrs but not exc 500 Ltrs, complete all as specified and directed.
Demolition of unreinforced cement concrete any description and in any position complete all as specified and directed.
Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
Dismantling timber scantling 40 Sqm and over in section in unframed work etc complete all as specified and directed.
Taking down roof trusses, coupled rafters or trussed beams, above 4m but n. exc. 8m length clear span complete all as specified and directed.
M&L 15mm thick rendering in CM 1:4 on brick work or concrete surfaces of wall, finished the surface even and smooth without using extra cement including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane, complete all as specified and directed.
Abrol construction co
dadwal engineers
RD Engineers
M/s Ashoka Brothers
M C ENTERPRISES
Bidder Name
dadwal engineers
Abrol construction co
RD Engineers
M/s Ashoka Brothers
M/S HIMANSHU BUILDERS
M C ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .