Loading
Loading…
Loading…
Tender Value
₹90.1 L
EMD Value
₹1.8 L
Closing Date
1 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TELE JAT
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender
Definition of similar work : Work of supply, installation, testing and commissioning of networking system through OFC or Copper Cable or Microwave or Wireless or Leased lines using Router/Switches/hubs/LAN Extenders or Wireless LAN/IP DSLAM. OR AMC of networking system through OFC or Copper Cable or Microwave Wireless Leased lines using Router/Switches/hubs/LAN Extenders or Wireless LAN/IP DSLAM. Note A1: For the following equipment's a. SDH/STM/PDMUX/IPMPLS/VOIP b. Control equipment c. ISDN/IP based exchange d. CCTV/Video surveillance system e. Integrated security system f. Networking equipment g. Train information display board/ Coach guidance system /IPIS/GPS CLOCKS h. secured communication system at level crossing gates i. VSAT J. MTRC 1. The equipment shall be procured from: a) If there is any RDSO approved source, then the equipment to be procured from the RDSO approved source or its authorized dealer/distributor b) If there is no RDSO approved source but there is TEC ap approved source, source, then the equipment to be procured from the TEC approved source or its authorized dealer/ distributor c) If there is no RDSO or TEC approved source then the equipment to be procured from the OEM OEM or or its its authorized dealer/ distributor 2. Make, Model, Specification of the offered equipment along with OEM authorization if the tenderer is other than OEM shall be submitted along with the tender. 3. MOU with RDSO approved Source or TEC approved source or the OEM, covering Supply, installation, testing, commissioning of system including after sales support required during warranty period shall be submitted along with the tender.
34 conditions · 17 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Provision of alternative control office in the JAT division
433_TELE_38_25_26
433_TELE_38_25_26
Open
Works - General
3 Months
Jammu, Jammu And Kashmir
₹0
₹1.8 L
1 Jul 2026
9 Jun 2026
17 Jun 2026
111 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 90,13,631.94 | ||
| — | 4.00 | — | — | ||
| "Supply of 2 Mb Programmable Primary Digital drop insert multiplexer as per RDSO Specs. IRS TC- 68/2004 (Amnd.1) or latest with conference facility and other stipulation to tender documents and fully wired for 30 channel complete with power supply card, remote control, supervision facility and all other accessories, installation material, manuals etc. It should have facilities to accommodate data interface card in multi drop mode and should be able to support cards needed for video conferencing and ISDN. It shall support NMS installed at Test Room and may operate local/remote location of entire section. It also includes submission of all technical documents, manuals and supply of all miscellaneous items which will be required for final testing and commissioning of system. The above MUX should be equipped with following circuits: - i) 2 wire/ 4 wire E&M VF circuits ( minimum 16 nos ckts) ii) Subscriber loop circuits ( minimum 4 nos ckts) iii) Exchange loop interface circuits (minimum 8 circuits ) iv) This also includes connecting all pigtails, optical patch cords etc to the SDH equipments. This also includes connection of SDH and primary MUX equipment with all interface cards to the 48V Bus including supply of wires and connectors termination of all evens on DDF taking PVC cable over runway or a wall and termination of VF interface circuit to the Krone type. MAKE PUNCOM. INSPECTION: RDSO FOR SUPPLY PORTION." | — | — | — | 11,91,322.28 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing, wiring & commissioning of Layer-2 managed Switch (24 ports 10/100/1000 BASE-Tports, 4x 1G SFP+ ports) as per RDSO Specification No RDSO/SPN/TC/83/2020 Revision 2.0 or latest .Switch must be TTP registered and certified .INSPECTION:RDSO | — | — | — | 2,60,180.3 | |
| — | 1200.00 | — | — | ||
| Supply of STP (Shielded Twisted Pair)CAT 6 Cable as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0 or latest.INSPECTION:CONSIGNEE. | — | — | — | 40,800 | |
| — | 1.00 | — | — | ||
| Supply and installation of Rack mount Servers to work as IP-PBX. The server should be installed with Ubuntu Server LTS 22.04 &Asterisk 18.13.0 LTS or Latest supporting 50ports upto 500 ports. INSPECTION: RITES FOR SUPPLY PORTION. | — | — | — | 2,07,248.79 | |
| — | 1200.00 | — | — | ||
| Supply of 12 Fiber Armored Single mode Optical Fiber ITU - G 652 D. All Dielectric Self Supporting Optical Fiber Cable .Make: FINOLEX, KEC or Better.INSPECTION:CONSIGNEE. | — | — | — | 28,020 | |
| — | 500.00 | — | — | ||
| Supply and installation of I/O Box, WhiteJack Cat 6 Keystone UTP with Face Plate- Single (Keystone Jack, Square) & SMB.Make: D-Link or similar. Inspection:Consignee for Supply portion. | — | — | — | 1,38,375 | |
| — | 2900.00 | — | — | ||
| Laying of OFC/Power cable/CAT-6 cable PA Cable/Data cable and all the other types of telecom cable and all the other types of telecom cable through HDPE pipe/casing capping/fall ceiling with laying/fixing of HDPE pipe/casing capping/uPVC pipe for connecting/interfacing variouys cpmponents and system integration.This work needs to be done as per Railway Site Engineer. | — | — | — | 76,328 | |
| — | 2.00 | — | — | ||
| Excavation of cable trench of 300mm wide and 800mm deep as per approved cable route plan on concrete platform/pukka surface/Track/Pitched/stone/Rocks/ Brick paved surface/chiseling/ blasting of rocks and back filling after laying of HDPE Pipe/Telecom cable, ramming of the soil in trenches and consolidation of soil & restoration of surface. This also includes clearing of temporary obstruction on the selected routes.This work needs to be done as per Railway Site Engineer. | — | — | — | 2,03,486.34 | |
| — | 5.00 | — | — | ||
| Supply and installation of 4 Wire DTMF Type control HQ Equipment as per RDSO specs IRS-TC 60/2007 Amendment-1 or latest with mike, speaker, hand set and code generator etc. along with numeric key pad LED/LCD display and 12V/40AH Maintenance free dual battery back up with charging system, this should also comprise of mounting arrangement and wiring in control office having inter connection with test room with capability to connect and disconnect control circuits from test room as directed by Railway Site Incharge.INSPECTION: CONSIGNEE. | — | — | — | 3,61,422.1 | |
| — | 2.00 | — | — | ||
| Supply of control room equipment operated on 48 V DC, with three digit 7 segment LED display and way station calling facility up to 80 stations by pressing push button along with 20 local Telephone calling facility with microphone speaker and handset along with remote patching equipment capacity as per RDSO specification No. RDSO/SPN/TC/66/2007 with ammendment-2, including latest amendment. INSPECTION :RDSO/RITES | — | — | — | 2,61,070 | |
| — | 2.00 | — | — | ||
| Wiring, testing, installation & commissioning of control room HQ equipment for controller's use operated on 48 volt DC. (This includes supply of all materials for execution of work such as PVC casing & caping, fixing materials 10/20 pair indoor PVC cable, , wiring & masonary works except control room HQ equipment which will be procured by Railway against other SOR item & issued to contractor for execution). which will be procured by Railway against other SOR item & issued to contractor for execution).This work needs to be done as per Railway Site Engineer. | — | — | — | 2,544 | |
| — | 2.00 | — | — | ||
| Supply of Test room equipment with 19" Rack mounting 48 V DC operated directly interface with OFC 4wire circuit as per RDSO specification no. RDSO/SPN/TC/66/2007 with ammendment-2, including latest amendment.INSPECTION : RDSO | — | — | — | 2,64,154 | |
| — | 2.00 | — | — | ||
| Wiring, testing & installation of Test room equipment on 19" rack. ( (This includes supply of all materials for execution of work such as PVC casing & caping, fixing materials 10/20 pair indoor PVC cable, wiring & masonary works except Test room equipment which will be procured by Railway against other SOR item & issued to contractor for execution).This work needs to be done as per Railway Site Engineer. | — | — | — | 2,544 | |
| — | 1.00 | — | — | ||
| Supply, Installation, Configuration, Testing &Commissioning of modular router integrating 2 E1 ports with E1-to-OFC conversion, ideal for bridging legacy telecom systems with modern optical networks. It features 8 Gigabit Ethernet ports (TX/SFP), supports advanced routing protocols (RIP, OSPF, BGP), and includes built-in firewall and encryption (IPSEC, GRE, AES). With dual power supply, IP SLA, SNMP, and NetFlow support, it ensures secure, high-speed, and reliable connectivity for enterprise-grade deployments.INSPECTION : RITES | — | — | — | 2,66,090 | |
| — | 20.00 | — | — | ||
| Supply and installation of 9U, 19 inch rack for pole mount/ wall mount with Fan 230VAC 90CFM-02 Nos., AC distribution box (5 socket of 5A, Power On LED indicator, MCB)- 01 No., Shelf Cantilever 1U: 01 No. Cable Manager 1U:01 No. INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | — | — | 2,41,886.2 | |
| — | 5.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of 24 Port manageble Layer 3 Switch with 4 Nos of 10G SFP port and 24 Nos of GE port with all accessories as per Spec. No: RDSO/SPN/ TC/83/2020 Ver.2.0 or latest. Switch must be TTP registered and certified .Inspection : RDSO/RITES | — | — | — | 8,31,300.85 | |
| — | 1.00 | — | — | ||
| Supply, installation ,testing and commissioning of UPS 5 KVA capacity with battery bank for 1 hrs ( ON Line) at required load & battery trolley as per specification no RDSO/PE/SPEC/PS/ 0023, (Rev. '0') 2001 Amdt 4 or latest.INSPECTION : CONSIGNEE | — | — | — | 1,11,041.84 | |
| — | 4.00 | — | — | ||
| Supply and Installation of 19 inch 42U 600mm Depth Telecom Rack withStandard Accessories (Closed type)Front Door Glass type, all doors should be removable type.INSPECTION : CONSIGNEE | — | — | — | 1,14,571.2 | |
| — | 10.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of Layer 2 Switch having 8 Nos. 10/100/1000 Base-T PoE port with 2 Nos. of SFP port as per RDSO spec.Spec.No: RDSO/SPN/ TC/83/2020 Ver.2.0 or latest. Switch must be TTP registered and certified. INSPECTION : RDSO/ RITES | — | — | — | 2,14,128.2 | |
| — | 10.00 | — | — | ||
| Supply and installation of wireless access point dual band indoor managed/standalone access, built in antenna, two ports(1GE + 1FE), POE support. This includes all accessories make DIGISOL model DG- WM5307IAC or superior or similar. Inspection: Consignee | — | — | — | 1,58,703 | |
| — | 2.00 | — | — | ||
| Supply of 32 channel NVR as per specs No. 10.2 of RDSO specs No. RDSO/SPN/TC/65/2021 Version:6 or latest including 1 TB Surveillance HDD Inspection: Consignee | — | — | — | 69,502 | |
| — | 60.00 | — | — | ||
| Supply,Installation,Testing & Commissioning of Minimum 2MP IP Dome Camera,with HD CMOS HQ sensor minimum 1/3", Focal Length minimum 4mm (1280 x 720) or better @ 25 fps, Min IR Range 30 m.Multiprotcol Supported, Multistreaming Supported password supported,ONVIF Supported,PoE supported, Interface-RJ-45,Ethernet. ( The Camera Must be STQC Complied) Inspection by Consignee. | — | — | — | 2,49,082.2 | |
| — | 190.00 | — | — | ||
| Supply of SC/APC -LC/PC patch cord (5 meter) (3M, TE connectivity, R&M make or superior) Inspection: Consignee | — | — | — | 27,871.1 | |
| — | 190.00 | — | — | ||
| Supply of SC-APC/SC-APC patch cord (1 meter) (3M, TE connectivity, R&M make or superior) Inspection: Consignee | — | — | — | 22,712.6 | |
| — | 5.00 | — | — | ||
| Supply of cable termination panel rack for fitting of 4 Nos 32-Way U-link panel and mounting arrangemnets for fitting of isolation transformers as per instruction of site Incharge. This also includes a Copper Strip of 450x15x3 mm for Earthing pupose. Inspection: Consignee | — | — | — | 13,842 | |
| — | 20.00 | — | — | ||
| Supply of U link Panel complete with 32 Nos of U links.INSPECTION : CONSIGNEE | — | — | — | 35,468.6 | |
| — | 200.00 | — | — | ||
| Supply of U link for 32-U link panel of U link U link protel make or similar. Inspection: Consignee | — | — | — | 10,180 | |
| — | 20.00 | — | — | ||
| Installation and wiring of the U link panel above item.This work needs to be done as per Railway Site Engineer. | — | — | — | 4,035 | |
| — | 3.00 | — | — | ||
| Supply of basic material to construct unit maintenance free earth as per RDSO Specs. NoRDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No.SDO/ RDSO/E&B/001 dtd.19.09.08 . It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bondingthickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. © Copper strip of 150x25x6 mm, to terminate earth rod= 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 200x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (iii) Supply of 16 sq.mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (v) Supply of copper lug sleeve for 3/16 cable . Inspection: CONSIGNEE | — | — | — | 52,592.19 | |
| — | 3.00 | — | — | ||
| Installation of Unit Maintenance Free Earth as supplied under item no. 13.3 of Chapter 13 of SOR . It includes ( i ) Digging the earth to the required depth. (ii)Insertion of electrode. (iii) Filling of earth enhancingcompound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x150 mm to the earth electrodes. All material tools andfeatures required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness of 250 micrones to made requirement of under writer's laboratories (UL) 467-2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300mm x 25 mm x 6 mm for main equip- potential busbar,ncopper strips of 150 mm x 25 mm x 6 mm sub equip- potential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO Specn.No.RDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No.SDO/RDSO/E&B/001 or latest.Earth to be installed and commissioned as per TAN and OEM or authorized vendor will give commission certificate for commission of Maintenance Free Earth.( NOTE: EARTH TO MEEB ALL CONECTIONS MUST TO BE DONE THROUGH CAD WELDING) | — | — | — | 23,885.04 | |
| — | 2.00 | — | — | ||
| Supply of MODULAR TABLE L X D & H 1200 millimeter X 600millimeter 725 millimeter Brand : ELITZAR Brand or similar Inspection: Consignee | — | — | — | 10,000 | |
| — | 10.00 | — | — | ||
| Supply of 220V 50Hz, Power Supply Extention board with having four sockets with independent ON/OFF switch and compatible for both 5 Amp & 16 Amp plug Inspection: Consignee | — | — | — | 7,000 | |
| — | 500.00 | — | — | ||
| Supply of power cable 3 core 2.5 sq mm multi strand (36/0.3 mm dia) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for railway electrification area shall be of reputed make like Delton, LAPP, Finolex, or superior. Inspection: Consignee | — | — | — | 15,010 | |
| — | 490.00 | — | — | ||
| Supply of RJ-45 CONNECTOR of reputed make such as Dlink or better. Inspection: Consignee | — | — | — | 6,208.3 | |
| — | 1200.00 | — | — | ||
| "Supply of PVC conduit pipe (minimum 25 mm dia./1.55 mm thick, 3 metre long and ISI brand) with flexible pipes fixing /laying materials and all other accessories as per requirement. INSPECTION: CONSIGNEE FOR SUPPLY PORTION" | — | — | — | 35,904 | |
| — | 2.00 | — | — | ||
| Supply of Standard 19"" Rack mountable, -48V DC Working,Add-Drop STM-4 SDH Equipment conforming to TEC GR supply, 2 Nos. STM 4 ofAggregate L 4.2 Optical interface Modules/Cards, one each for East and West sideTX/RX and 2 nos. of STM-1S1.1 or L1.1 Optical interface modules complete with 5 mts.long Optical Patch Cords, 63E1s card with DDFs and Cable assembly for termination to DDF and minimum 8 nos. of10/100 Base-T EthernetPorts/Fast Ethernet on SDH(EoS) 10/100 Base-T interface Module/Card supporting with LCAS and GFP, Order wire subrack, DDF installation Material,Manuals and other accessories along with CompleteEngineering Order Wire (EOW)arrangement. Note : i) Itshould have necessarysoftware/Firmware for Local/remote Monitoring/Configuration of the equipments through NMS ii)Two no MCBs of appropriaterating along with necessaryconnecting cords and cables forPower Supply Module/Cardshould be supplied andinstaaled as per instruction onsiteincharge.""No.GR/SDH/-010/03JA 2011 (with latest amendment) complete with redundant power. INSPECTION: RDSO FOR SUPPLY PORTION. | — | — | — | 6,99,456.9 | |
| — | 2.00 | — | — | ||
| Installation and wiring of SDHSTM-4/ADMs primary drop insert multiplexers with all accessories, 19" rack with suitable stand/ platform made of MS angle/CC , power supply board FDF racks (Alreadyinstalled) , DDF with miniature'U' link type for 63E1s , runway ladder , etc. This includes connecting all pig tails, optical patch cords etc. to the SDH equipments. This also includes connecting the SDH and primary MUX equipment with all interface cards to the 48VBus including supply of wiresand connectors , termination ofall E1 on DDF , taking PVC cable over runway or a walland termination of VF interface circuits to the krone type | — | — | — | 41,218.88 | |
| — | 8.00 | — | — | ||
| Supply of C series MCB 2 POLE 32 AMP with metal enclosure. Make Schneider, Legrand, L&T, Havells. Inspection: Consignee | — | — | — | 4,715.04 | |
| — | 2.00 | — | — | ||
| Supply of SMPS based Battery Chargers as per RDSO Spec for Telecom use 48 volts, 25 Amps in 2+1 configuration modules of 25 Amps with ultimate expandable capacity 50 Amps, automatic switching between the modules as per RDSO Spec No. RDSO/SPN/TC/23/1999 version 4 or latest along with two potential free contacts.Inspection: RDSO | — | — | — | 2,49,281.56 | |
| — | 2.00 | — | — | ||
| Installation wiring commissioning of 48 volt / 25Amp SMPS based charger along with the power supply wiring from Power room to equipment room in ladder, wire, SPD, MCB,ladder and any other material required for installation will be arranged by the contractor. | — | — | — | 10,121.14 | |
| — | 2.00 | — | — | ||
| "Supply of maintenance free VRLA secondary cells duly charged of 48V 200AH and each 2.0V when fully charged 200AH capacity along with accessories i.e. inter sell connectivity links/float. 4 Nos.insulators for each cell 24 Nos.of cell per set as per RDSO Spec. IRS/S/93/96A with latest amendments with cuticle steel/hylem tray battery rackto install/house batteries. INSPECTION: RDSO FOR SUPPLY PORTION. | — | — | — | 1,48,354.66 | |
| — | 2.00 | — | — | ||
| Installation wiring commissioning of 48V/200AHVRLA battery set for Telecom installations | — | — | — | 6,197.44 | |
| — | 10.00 | — | — | ||
| Supply & installation of 100 pair Krone type DP Box with Krone module with complete accessories. Inspection by Consignee | — | — | — | 1,27,283 | |
| — | 8.00 | — | — | ||
| Supply of Digital Clock suitable for Office Complex with GPS Synchronization in standalone mode as per Clause 6 of RDSO SPN TC 62/2008, (Rev 3.0) Amnd. 2 or latest. Inspection: Consignee | — | — | — | 1,05,656.88 | |
| — | 60.00 | — | — | ||
| "Supply of SFP Optical/Electrical 1 Gbps or100/1000 Mbps Electrical as required. Suitable for supplied switches. INSPECTION: CONSIGNEE FOR SUPPLY PORTION" | — | — | — | 2,63,365.2 | |
| — | 1.00 | Lumpsum 195800.00 | — | ||
| "Shifting of all telecom Gears from old telcom control to New RE Control building including all circuits of Control communication, FOIS, Voice logger, Railnet, BSNL etc. and all types of cables like, OFC, PIJF, Cat6 etc. and their termination with supply and installation of Patch/ U-Link Panel with U-Link cables as required by the SSE In- charge.It also included Control communication System map of Jammu division with all details as provided by SSE Incharge.All material required for shifting & installation to be provided by Contractor" | — | — | — | 1,95,800 | |
| — | 131.22 | — | — | ||
| Preparation of cable way 150mm wide at bottom and 200mm deep in rocky area/CC road/Platform and other CC/Stony location and refilling the same (after telecom Cable laying as well as laying PVC pipe which shall be paid separately under different items of the schedule ) with concrete mixture of proportion 1:3:6 all along the trench done rocky area with contractor's own cement mixture, sand, water and other required materials and restoration of earth work as original with tiles/marvel/Granite etc.This work needs to be done as per Railway Site Engineer. | — | — | — | 34,117.2 | |
| — | 0.10 | — | — | ||
| Trenching up to depth of 1200mm with 300mm wide base in all types of soil (Normal soil, Hard soil & Black cotton soil) and backfilling after laying of HDPE pipe /OFC cable and 6 quad/PIJF cable etc. at 1200mm & 1000 mm depth respectively as per Drg No.CORE/S&T/ALD/SK/571/04 . Ramming and consolidation of soil in trenches as well as disposal of the soil if any. | — | — | — | 7,000.7 | |
| — | 200.00 | — | — | ||
| Splicing of fibres OFC Cable and making Splice joint with contractor's own splicing machine and tools and consumables. | — | — | — | 66,000 | |
| — | 11.00 | — | — | ||
| Supply of single mode single fiber 10G SFP+ module compatible with switches . INSPECTION: CONSIGNEE. | — | — | — | 34,375 | |
| — | 3.00 | — | — | ||
| Supply of Steel Almirah, Height- 1855 MM, Width- 910 MM, Depth- 430 MM etc.Inspection: Consignee | — | — | — | 49,200 | |
| — | 82.00 | — | — | ||
| Supply of Caller ID Analogue Phone Having 10 one touch key Make Beetel. (Caller ID Corded Landline Phone with 16 Digit LCD Display & Adjustable contrast,10 One Touch Memory Buttons,2Ways Speaker Phone,Music On Hold, Solid Build Quality, Classic Design) INSPECTION: CONSIGNEE FOR SUPPLY PORTION." | — | — | — | 72,387.14 | |
| — | 1.00 | — | — | ||
| Supply ,Installation, Testing and Commisioning of Hybrid IP-PBX with 1 CPU and 1 DC Power Supply with License for 8 Slots. Expandable up to 120 analog ports, 48 digital ports, 24 Analog Trunks, 999 IP Users, 99 VOIP Trunks, 40 GSM Ports, 8 T1/E1 ISDN PRI ports. The system is configured for 32 Analog Extensions, 32 Digital Ports and PRI card along with software and configuration with CORAL Exchange.Inspection By consignee | — | — | — | 1,91,878.33 | |
| — | 2.00 | — | — | ||
| Supply, Installation, Configuration, Testing & Commissioning of Router for Tier 2 Locations as per tech specs attached in Annexure -I . Inspection : RDSO | — | — | — | 11,33,713.74 | |
| — | 1.00 | Lumpsum | — | ||
| Complete Wiring of COA/FOIS in Control office .This includes all the wiring includes integration of COA/FOIS,supply of cable ties ,labelling and other miscellaneous items that is included in wiring & labelling part.This work needs to be done as per Railway Site Engineer. | — | — | — | 15,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXURE-I-TIER2ROUTERSPECS_11zon.pdf
ATTACHMENT
IRGCC2022ACS7-10.pdf
ATTACHMENT
StandardTenderDocument2022andcorrection.pdf Standard Tender Documents with correction
ATTACHMENT
SpeicalconditionsofworkSignal.pdf
ATTACHMENT
SpecialconditionTelecomm.pdf
ATTACHMENT
IRGCCApril2022andcorrectionSlip.pdf
ATTACHMENT
StandardTenderDocument2022andcorrection.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .