DEVELOPING AN ECO-RESTORATION PLAN FOR ALLIKUTTAI LAKE IN SALEM CITY MUNICIPAL CORPORATION

Amount

EARTH WORK EXCAVATION

Earth work in all soils except hard rock requiring blasting and conveying for Desilting and formation of bund with lead of 0 to 100 metre deploying earth moving machinery and tippers including benching, formation of bunds, breaking clods, sectioning etc., complete (PWD-SOR-Pg: 24/Sl: 54)

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum For Narrow Foundations - First Depth Upto 2m

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum For drain and culvert

FILLING

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification..

Supplying and filling in basement with Soling Stones unblasted 15cm cube in layers of 15cm thick including watering and ramming to consolidation - etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Quarry Dust (stone dust) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

CENTRING WORKS

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel without shuttering

Centering without strutting below 1m height

Centering for Plain surface

Centering without strutting above 1m height

Supplying & Erecting of steel centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). TNDSS NO.86 K, 86 A

Slab Lvl 5.30m to 6.30m

PLAIN CEMENT CONCRETE

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plain Cement Concrete 1:4:8 (one cement four Crushed stone sand and eight aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.

REINFORCED CEMENT CONCRETE

Providing and laying in position Standardised Concrete Mix M-20 Grade in a0.45ordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all R0.45 items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to a0.45elerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the R0.45 floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Providing and laying in position Standardised Concrete Mix M-25 Grade in a0.45ordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all R0.45 items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to a0.45elerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the R0.45 floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Foundation Basement

Upto 4.50m height (plinth level to 4.50m ht)

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Inlet and Outlet arrangements (Foundation Lvl)

Inlet (Foundation Lvl to 4.5m High

STEEL

Supplying, fabricating and placing in position Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Casting of precast cement concrete blocks of size 20 × 20 × 15mm in Plain cement concrete of mix 1:1 1/2:3 ( One cement one and half sand and three aggregate) using 20mm size hard broken stone jelly and mixing the concrete and laying the concrete in steel moulds after oiling them properly at casing yard and vibrating finishing the top surface smoothy placing the slab along with mould and plate in the casting yard removing the mould carefully after initial setting, Placing the slab in the curing bond after 24 hours from the time of casting, removing them from the curing pond after 7days of curing, stacking them in the stacking yard with in a lead of 100m and curing them from the full period by sprinking water as directed by the departmental Officers.

Casting of precast cement concrete Post of size 150x150x2400mm in Plain cement Concrte Mix of 1:1 1/2:3 ( One cement one and half rate sand Three aggregate) using 20mm size hard broken stone jelly and mixing the concrete and laying the concrete in steel moulds after oiling them properly at casing yard and vibrating finishing the top surface smoothy placing the slab along with mould and plate in the casting yard removing the mould carefully after initial setting, Placing the slab in the euring bond after 24 hours from the time of casting, removing them from the curing pond after 7days of curing, stacking them in the stacking yard [with in a lead of 100m and curing them from the full period by sprinking water as directed by the departmental Officers.

Supplying and Fixing of Chain link-2"x2" using 10 Gauge Galvanised Iron wires (Of all sizes) for fencing cost including all material, binding wire and labour charges etc. complete as per Standard specification and as directed by the departmental officers.For 10M2

Supplying and Fixing of 1000mm Dia Hume Pipe and placing in position RCC works as per design given including cost of Earthiling etc,.RCC non pressure spun pipe with socket and spigot ends as per IS 458/2003 manufactured with sulphate resistant cement with 12 mm HI -alumina lining with rubber ring joints. (TWAD-Pg:63/ Sl:12)

Sluice Gate Valve 450mm dia CI sluice valves non raising spindle types to pressure rating of 1.6 pn to be used in pump houses (long body/ long face to face) conforming to is and with 5 years warranty (TWD-Pg:65)

STONE MASONRY

Random Rubble Masonry in Cement Mortor 1:5 Mix (one cement, five sand) using new best rough and bond stones from approved quarry including cost and conveyance of all materials to site loading and unloading charges and labour charges for mixing,laying with simaltaneous pointingand curing etc. complete. complying with std. specifications

BRICK MASONRY

Brick work in CM 1:3 (one cement & Three Crushed Stone Sand (M- Sand) using ground moulded chamber bricks of size 9"X4 3/8"X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification - 100cft

Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm

Brick work in CM 1:5 (one cement & five sand) using III class country bricks of size 8 3/4"X4 1/4" X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

FLOORING

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Supply, Delivery and Laying of Manglore Roofing Tiles height of 3 to 4m level, cost and conveyance and fixing in position etc complete

PLASTRING

Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specific

Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standar

PAINTING

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty

Steel doors and windows

FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers PWD SOR Pg. No. 43 Sl.No.127 a

Fabricating Supply and fixing and position of MS doors with double leave made out of 18 gauge M.S. sheet, outer frame 35x35x5mm angle, inner frame 25x25x5mm angle, cross stiffner with MS flat 25x5mm, altrop tower bolts 2 Nos. two handles and six holdfasts completed welded and rivetted and one coat of red oxide painting including cost of all materials and labour etc., complete (TWD-1x2.1 / Pg: 91-ii)

UPVC Window supplying and fixing UPVC ( Un-PLASTICIZED Polyvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with g/1mm 125GSM and 100% corrosion free, the profiles are multi chambered section with wall thick of 2mm. The EPDM rubber (black color) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power points locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed or plain glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss.(PWD-Pg:65 / SL:269)

PLUMBING WORKS (Water Works)

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit (TWAD-Pg: 302)

Upto 60 m Depth ending below ground level

From 60 m upto 90 m Depth ending from ground level

From 90 m upto 120 m Depth ending from ground level

From 120 m upto 150 m Depth ending from ground level

Supply and delivery of 150mm PVC casing pipes of approved quality etc., complete (Pg:22)

Reaming 200 mm dia pilot bore to 350mm dia bore as directed by the TWAD Board Officer

Upto 60 m depth ending below ground level

From 60 m depth and upto 90 mt depth ending below ground level

From 90 m upto 120 m depth ending below ground level

From 120 m upto 150 m depth ending below ground level

Replacement of Underground Utilities 50mm DIA (HDPE Pipes) damaged during Earthwork excavations for pipe laying works including cost of additional earthwork excavation in all soils, including BT cutting, CCoads , removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of HDPE pipes, couplers, jointing materials and required specials, cutting, threading, conveying , aying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the TWAD board officers.

Supplying and delivery of 32mm dia GI B class pipes etc complete

Supplying and fixing of GI specials as follows

50 mmGI Pipe

50 mm GI coupling

50 mm GI elbow

50mm GI union

50 mmGI Hex nipple

50mm GM Non Return valve

50mm GM Gate valve

Bore cover

Bore clamp

32 mmGI Pipe

32 mm GI coupling

32 mm GI elbow

32 mm GI union

32 mmGI Hex nipple

32 mm GM Non Return valve

32 mm GM Gate valve

Erection of 5 HP wet type submercible Pump set with necessary 50mm dia GI pipes, Couplings 2.5sq mm copper conductor and other necessary fittings etc complete and testing the pump set for 3 days tialrun (upto 5 HP) (TWAD-PG:102-75x150)

Supply and delivery three phase 5HP Submersible pumpset 201pm x 125mtr suitable for 150mm DIA Borewell with isi mark is 8034 without panel board inloding cost and convayance of materal and transport charges etc completed (Texmor, CRI)(TWAD-PG:105-75x25)

PVC insulated and sheathed 3 core flat type copper cable 2.5sq.mm conforming to IS 694/1990

Supply and delivery of Three phase panel board with two level guard and auto start for 5HP motor including all cost and conveyance of all materials and labour charges etc. complete as per standard specifications

Supply and delivery of 63mm PVC pipe incuding cost and conveyance of all material and Transport charge etc Complete

Supply and delivery of 50mm GI pipe incuding cost and conveyance of all material and Transport charge etc Complete

Lowering 32mm GI pipe and specials to trench and laying to proper grade and alignment testing to the required pressure including conveyance of water for filling during testing.

Lowering 63mm PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Lowering 50mm GI pipe and specials to trench and laying to proper grade and alignment testing to the required pressure including conveyance of water for filling during testing.

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

ELECTRICAL WORKS

Supplying and fixing of 4 metre length single bracket pole with base plate (250x250x6mm0 76.10mm OD x 3.65 mm thick x 4000mm Length in control box with foundation hardwares. etc complete as per standard specification. As per PWD SOR 2021-22 P.No.98

Supply and Fixing of 30 W LED Street Light Fittings as per PWD SOR P.No.69

Supply and laying of 2 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.Ele. Data 2021-22 SD -197

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unshealhed SC.Cu. conductor of 1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm t

Supply and fixing of single box type 4feet 36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 87

Main Panel boards (LT Electrical Installation Works )

METERING PANEL-CT METER

Fabrication, Supply, Erection, Testing and Commissioning of CPRI certified Indoor panel board made up of 2mm thickness powder coated CRCA sheet steel with 50x6mm cu bus bar provision for all Phases and Neutral, door with industrial lock, main 3 Nos o

CT METER CONTROL.

Supplying,erecting,connecting & commissioning 250 AMPS TPN FSU metal sheet enclosure with necessary Interconnections, cable box,brackets, screws,bolts,nuts,etc.for CT METER OUTGOING CONTROL

MAIN POWER PANEL

Fabrication, Supply, Erection, Testing and Commissioning of CPRI certified Indoor panel board made up of 2mm thickness powder coated CRCA sheet steel with cu bus bar provision (Ph-50x10mm for all phases Ne-50x8mm & E-2X40x3mm) with heat shrinkable ins

LT ,1100V GRADE PVC / XLPE ARMOURED UNDERGROUND CABLE

Supply and fixing of 3.5 X 400Sqmm PVC armoured LT UG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 mt.Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD214)

Main electrical Room to EB POST

Supply and clamping , fixing of 3.5 X 185 Sqmm PVC armoured LT UG cable on post on Wall with MS Clamps (SD-211)

Main electrical Room to capacitor panel

CABLE GLANDS

Supply and fixing of brass cable gland for 3 1/2 X 400 Sqmm PVC armoured LT UG cable with earth connection. (SD-196)

Ct meter to main panel to floor panel

Supply and fixing of brass cable gland for 3 1/2 X 185 Sqmm PVC armoured LT UG cable with earth connection.

main Panel to capacitor panel

CABLE END TERMINATION

Supply and providing cable end termination of 3 1/2 X 400 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.

Ct meter to main panel to floor panel

Supply and providing cable end termination of 3 1/2 X 185Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.

main Panel to capacitor panel

EARTHING & LIGHTNING ROD

EARTHING

Earthing as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC co

Metering panel -2 & transformer yard

Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements

Supply and run of 2 of No.8 SWG G.I wire for guarding with gradle with No.8 SWG G.I wire at the equal interval of 1.5 Metre.SD 75

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / Supports on wall / floor / ground for earth connection.SD 76

Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 fee

CCTV Camera

Supply fixing and erection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification (5units / park) (PWD SOR Page (153 TO 157)

CCTV Camera (Q)

Network Video Recorder (PWD SOR PG.NO: 154)

Hard disc for NVR 4TB (PWD SOR PG.NO 155)

24 Port Patch Panel (PWD SOR PG. NO: 156)

Rack With Accessories -4U (PWD SOR PG.NO: 155)

Armoured LAN & CCTV Cable (CAT-6) (PWD SOR PG.NO 153)

(29" Led TV for display (Q)

TOTAL SOR ITEMS

NON SOR ITEMS

KIDS PLAY MATERIAL

Normal Slide 8’ Supplying and fixing of Age :- 3 to 14 Fiber Thickness: 12 mm MS Pipe: 2.5’’, 1 ¼’’, 1’’, ¾’’ Pipe Thickness: 1.6 mm MS Angle: 1 ¼’’x ¼’’ Paint: Auto Coat Dimension: 12’x2’x7’ Area Size: 18’x5’

Spiral Slide MS Pipe: 3’’, 1 ½’’, 1’’ Pipe Thickness: 2 mm FRP Thickness: 6 mm Paint: Auto Coat Dimension: 14’x6’x10 ½

Roller Slide 10’Feet Slide with PVC Roller Fiber Thickness: 12 mm MS Pipe: 2.5’’, 1 ¼’’, 1’’, ¾’’ Pipe Thickness: 1.6 mm MS Angle: 1 ¼’’x ¼’’ Paint: Auto Coat Dimension: 12’x2’x7’ Area Size: 18’x5

Seesaw 4 Seat Fiber Thickness: 4 mm MS Pipe: 3’’, 2’’, 1 ¼’’ Pipe Thickness: 1.6 mm Paint: Auto Coat

Merry Go Round MS Pipe: 1 ¼’’, 1’’ Pipe Thickness:2 Fiber Thickness: 4 Paint: Auto Coat Dimension: 5’x5’x Area Size: 6’x6’

Rainbow Ladder Dimension: 1.5’x12’ Area Size:15’x3’

Butterfly Swing Dimension: 5’x5.5 Area Size: 8’x8’

Multiplay System  Stage with Roof – 3 Nos  Bridge – 1 No  Double Slide 8’– 1 No  Swing 2 Seat – 1 No  Square Climber – 1 No  Spiral Slide 7’ – 1 No  Ladder – 1 No  Tunnel – 1 No

AERATOR & BIOHUT TECHNOLOGY

AERATOR TECHNICAL SPECIFICATIONS

AERATOR BODY with 6 nos. of plates (2 nos. Long size plates of Length 2500mm and Height 1200mm) and 2 nos. short side plates of Length 1500mm and Height 1200mm and 1 no. Top side plate of Length 2500mm and Breath 1500mm and 1 no. bottom plate of Length 2500mm and breath 1500mm. The welding shall be extrusion welding. The dimensional ratio of the aerator body is 2.5L X 1.5B X 1.2H. The number of exits port shall be 20 of dia 141mm and the number of suction ports shall be 20 nos. of dia 141mm.

SPLASH PROOF ENCLOSURE. The blower enclosure has five sides constructed of plastic plate with open bottom. The open bottom is placed over the blower and fixed to the top plate of the aerator box by fastening bolts. The side plate of the blower enclosure is provided with a plurality of circular openings for air ventilation during operation. Each of these circular openings should be provided with “L” type fittings on the inner side of plates to prevent water entry during rain periods

AERATOR INTERNALS with air distribution assembly with loop header fitted with distribution nozzles and draft tubes. 20 Nos. of Air Injection assembly with Injector, Connector, Gas Tube, Slotted Tube and Suction Tubes. Ballast Tank of suitable diameter based on the actual weight of system shall be provided.

BLOWER / ELECTRIC MOTOR High speed centrifugal blower with an aero dynamic impeller and casing for high volume air pumping. The motor shall be high speed motor with in-built or panel mounted VFD. The suction port of the blower shall be fitted with to avoid dust into the blower casing. The bottom of the blower assembly shall be provided with anti vibration pads to subside vibrations generated during high speed operations.

The Electric motor shall be permanent magnet or special high speed, horizontally mounted and further according to IEC Standard Type IE3 (High Efficiency) IP55. The power rating of the motor shall be 4KW with the maximum flow rate of 2400 Cu.m per hour, maximum pressure difference of 100mbar, minimum permitted blower speed of 12000rpm, and maximum permitted blower speed of 18900 rpm. Rated industrial voltage of 380 to 480V and rated industrial frequency of 50 to 60Hz. and rated current of 8A.

AERATOR EXTERNAL ACCESSORIES shall have 2 numbers of floats of diameter 312mm and Length 2140mm. The MOC of the floats shall be of polypropylene with end plates welded to it. The floats shall have enough buoyancy volume to keep the entire structure of aerator afloat on the water surface. 20 nos. of suction extenders of suitable length shall be provided. 20nos. of seal rings shall be provided.

AERATOR INTERNALS. BLOWER / ELECTRIC MOTOR. AERATOR EXTERNAL ACCESSORIES

BIOHUT BIOFILTER TECHNOLOGY

CIVIL WORKS – Manual Bar Screen Chamber CIVIL WORKS – SHELTER & ELECTRICAL ROOM etc.

SELF PRIMING SEWAGE PUMP

BAR SCREEN

PRIMARY CLARIFIER

BIOHUT

PIPES PVC / PP & VALVES

ELECTRICAL CONTROL CABINET & CONTROL SYSTEM

Supplay and fixing of RCC Stone Bench Seating length of the Bench: 1500 mm Seating height of the Bench: 450 mmTotal height of the Bench: 1000 mmAll components are reinforced suitably for long use and to prevent damage during handling, transportation, and erection All parts are joined together with galvanized nuts & bolts of suitable size and all bolts etc complete

PHOENIX & CO