INSATLLATION OF PSA PLANT IN CIVIL HOSPITAL HISAR (PDG E.I. INTERAL ONLY)

Amount

COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) Wiring for Light/Fan/call bell point in 1.5 sum FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. (Her 23.1.1) Group C (Her 23.1.1.3)

Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sum FRLS copper wire and 1 no 1.5 Sam FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch required MS Box etc complete as required (HSR 23.1.4) Group C (HSR 23.1.4.3)

Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sum FRLS copper wire and 1 no 4 Sam FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required (HSR 23.1.5) Group C (HSR 23.1.5.3)

Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (HSR 23.6.6) MS Pipe of 20 mm dia. (HSR 23.6.6.1)

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labor and material required for the job complete in all respects.(HSR 23.8.10) 6 Modules (HSR 23.8.10.4)

12 Modules (HSR 23.8.10.6)

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. (HSR 23.8.11) 5 amp 1 way switch (HSR 23.8.11.1)

15 amp 1 way switch (HSR 23.8.11.3)

5 amp Socket (HSR 23.8.11.4)

15 amp 6 pin Socket (HSR 23.8.11.5)

Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work. (HSR 23.9)

Supply, erection and fixing of 12 mm thick ply wood board having a circular /rectangular hole etc as required including the cost of making hole, nuts and bolts, painting and other petty material with all labor etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. (HSR 23.13)

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR 23.22.1) 4 pole MCCB 200 to 250 amp, 25 KA (HSR 23.22.1.11)

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- (HSR 23.22.5) 40 amp to 63 amp. MCB's TRIPLE POLE (HSR 23.22.5.6)

LT CABLE (HSR 24.2) Laying of underground cable in pipe /existing open/closed trench etc as (HSR 24.2.4) 16 Sq mm to 35 sqmm 2 to 4 Core (HSR 24.2.4.2)

185 sqmm to 240 sqmm 3 to 3½ Core (HSR 24.2.4.4)

(Q) Earthing (HSR 24.1) Earthing with tinned copper earth plate 600 x 600 x 6 mm thick including accessories and providing masory enclosures with cover plate having locking arrangment and watering pipe etc (but without charcoal or core and salt) etc complete as required . (HSR 24.1.5)

Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode. (HSR 24.1.5)

providing and fixing of 25 mm x 5 mm copper strip on surface or in recess for connection etc as required with all labour and materials (HSR 24.1.9)

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 24.2.7) 10 sqmm to 16 sqmm Cable 2 to 4 Core (HSR 24.2.7.2)

120 sqmm to 185 sqmm Cable 3 to 32 Core (HSR 24.2.7.5)

RCC FOUNDATIONS FOR DG SET (HSR 24.7) Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1.8x1.0m) Unit: per cum Note: As size and dynamic load of DG sets vary from manufacturer to manufacturer, item of DG set foundation have been included on the basis of cubic contents of RCC. 250 KVA DG Set (HSR 24.7.5)

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. (HSR 23.22) Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 200 to 250 amp, 25 KA (HSR 23.22.1.11)

SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings (HSR 23.22.8) 300 amp 415 volts (HSR 23.22.8.4)

Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- (HSR 24.2.2) 50 Sq mm to 150 sqmm 2 to 4 Core. (HSR 24.2.2.3)

185 sqmm to 240 sqmm 3 to 3½ Core (HSR 24.2.2.4)

HDPE Pipe: S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. (HSR 24.5.2) DWC/HDPE pipe 145/123 mm outer dial inner dia

Non Schedule items:- Supply of Under Ground LT Power Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Havell's/ Grandlay/ RR Kabel. 16 Sqmm 4 Core Ard. Cable

50 Sqmm 3.5 Core Ard. Cable

185 Sqmm 3.5 Core Ard. Cable

Supply and erection of Double door sheet, steel superline/ Powerline/ Loadline TPN Vertical distribution boards suitable for TP/ FP veritcal MCCBs 25 KA MCCB upto 125 amp as incomer (but without cost of MCCBs) fitted with busbars, Neutral links,& Blanking plates complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (C&S/ Indoasian/Siemens). 4 Way Vertical

Supply and erection of 40 W LED batten with aluminium base heat shink complete of Dura Batten 50000 Bussiness Hours, 4600 Lumens. complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work. (Make:- Bajaj/ Havell's/ Philpls/)

Supply and erection of AC Ceiling fan without regulator 36/48" (900/1200mm) complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Havell's Model Orion and equivallant make Orient.

Supply of 1 KVA UPS invertor online with 1 hour backup complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- ELNOVA/ Microtek/ Etone.

S/E of 150 W LED Flood light luminaries with high power LED Minimum 110 lumens per watt Luminaries with secondary optics made in pressure die cast aluminum housing and Heat sink in aluminum extrusion with IP-65/66 with front toughened glass including the all petty material & labour for errection, complete in all respect of upto the entire satisfaction of the Engineer-in-Charge of the work. Make: Philps/ Bajaj/ Wipro/ Havell's.

Suppy of exhaust fans of 12" (300 mm) approved make complete in all respect. Make:- Havell's/ Orient make.

M/S SHIV ELECTRICAL AND CONSTRUCTIONS