Construction of Panel Room for C And D waste processing plant in Solid Waste Management Plant Bhausingh Panki.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by engineer- in- charge; 2.1.1 all kinds of soil .

1:6:12 (1 cement :6 coarse sand (zone-III ): 12 graded Brick aggregate 40 mm (nominal size)

Brick work with common burnt clay (non modular) bricks of class 150 in foundation and plinth in : Cement mortar 1:4 (1Cement: 4 C-Sand )

12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand )

Cement Concrete flooring 1:2:4 (1 cement : 2 coarse : 4 graded stone aggregate ) finished with a floating coat of neat cement, including cement slurry etc. all complete (40mm thick with 20mm nominal size stone aggregate)

Providing and fixing hand rail of approved size by welding etc. to steel ladder ralling, staircase railing and similar works, including applying priming coat of approved steel primer. M.S.Tube

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Supply & Fixing of 150MM Ventilating Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton, Havells, Bajaj or Equivalent AB

Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work

Supply and fitting of ceiling fan Usha , khetan , Bajaj I.S.I including all complete

Supply and wiring of submain with two number 4 sq.mm PVC insulated 1100 V grade single core aluminium conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq.mm multistrend copper conductor cable as earth continuty wire drawn in conduit.

704 Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. Confirming to IP 66 Protection complete in all respects CAT- AAA

Supply & fixing steel tubular pole 7.50 Metre long designated 410 SP-6 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect.

Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect.

S&F of 63 Amp. DP MCB (10 KA)

Supply and erection of 63 Amp. TPN tap off box on rising mains complete with HRC fuses etc. complete in all respect.