SPECIAL REPAIR TO BLDG NO KHY-17, PROVN OF 02 X TOILET BLOCK AND CEMENTED PATHWAY AT JUTOGH CANTT UNDER GE JUTOGH

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in hard/dense soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. and getting out complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L for 40mm thick Damp proof course horizontal surfaces incl necessary form work in PCC (1:2:4) type B-0 (using 12.5 graded crushed stone aggregate) mixed with water proofing compound as per manufacturers recommendation complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping to retaining wall/ steps/ perapet/ base of railing post hold fast block or similar work and finished the surface with existing and including form work complete all as specified and directed .

M&L for 75mm thick PCC 1:3:6 type C-2, using 40mm graded crushed stone aggreate as in plinth protection, the plinth protection shall be laid in alternate bays finishing the surface even and smooth without using extra cement complete all as specified and directed.

Returning filling in including spreading, levelling watering & well ramming in layers n. exc. 25 Cm thick in each layers complete all as specified and directed.

Removing excavated material to a distence n exc 50m and depositing where directed at a level n exc. 1.50 M above the starting point for any type of soil complete all as specified and directed.

S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L MS TMT bars, 5mm dia and over upto and incl 10mm dia as in stirrups, spacers, binders etc cut to shape requred, incl cranking spirally for hooping for columns, hooking ends binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long and dia of neck exc 12 but not exc 20mm complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment steel conforming to Fe-410 Gde E-250 quality 'A' complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surface of walls, mixed with water proofing compound @3% as per manufacturer's instructions, finished even and fair complete all as specified and directed. Note: WPC shall be measured and paid separately as supply only.

Supply only water proofing compound as approved complete all as specified and directed.

M&L for mooram/ red bajri filling in floor or paving laid in layers not exc 15cm thick including spreading, levelling and watering complete all as specified and directed.

M&L for broken stone hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in sub base finishing concrete surfaces even and rough to receive top layer complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350x250x7mm/ 450X350x7mm thick laid pattern as decided by Engr-in-Charge as in skirting dado riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tile laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for preperation of new plastered or previously unplastered surface of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or Gde E-165 complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 1000 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc., complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed complete all as specified and directed

S&F 20mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia of pipe, complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over and incl one coat of red oxide primer complete all as specified and directed.

S&F galvanised mild Steel water tubes,15 mm bore with all fittings, medium grade, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F galvanised mild Steel water tubes, 20 mm bore with all fittings, medium grade, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15 mm bib taps fancy type cast copper alloy chromium plated with crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F 15mm dia stop valve, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S & F of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F CP brass jet spray (health faucet) with flexible pipe 1.50m long fixed to EWC suitable for 15mm bore of pipe fixed complete all as specified and directed

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges ccomplete all as specified and directed.

S&F wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.

S& F 15mm dia PVC connection pipe with PTMT nuts of length 600mm long complete all as specified and directed.

S&F vitreous china wash water closet pan ( Pedestal pattern) white fixed in floor including P or S trap, connecting to drain (or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and directed.

S&F plastic water closet seat, white/coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 10 litres cap PVC low level valve less syphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified

S&F 32mm bore low density polythelene pipe (LDPE) of pressure rating 6Kgf/Sqcm complete fixed to walls and ceiling or laid in floors complete all as specified and directed

M&L for 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement outlet complete all as specified.

S&F PVC (SWR) pipes, 110mm dia single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed

S&F PVC (SWR) pipes, 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed

S&F PVC (SWR) bends 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F 110 mm bore, PVC (SWR), junction single, (Single T) equal or unequal fixed with approved adhesive complete all as specified and directed.

S & F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with 'L' or 'J' type hooks and washers in roofs with grade of Zinc coating 120 gm per sqm complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type C-21 complete all as specified and directed.

S&F aluminium extruded alloy handles fabricated type anodised 125mm long complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in landings, cover slabs ( for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 including demoltion of reinforced cement concrete complete all as specified and directed. Note: Reinforcement shall be measured and paid for separately.

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed.

M&L for concrete bed to drain pipe in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110mm bore pipe complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, comlete all as specified and directed.

M & L for walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in roof kerb or mud stops, rounded and chamfered in edges, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) removing of rubbish outside premices, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc, all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in filling of mass concrete for sub base including finishing the surface even and fair complete all as specified and directed.

M&L for granite (of any type) 20mm thick one side machine polished in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but n exc 4.0 Sqm each (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.

Taking down shutters exc 1.0 sqm but n exc 2.0 Sqm each and removing from site site including making good the distrurbed surfaces complete all as specified and directed.

S&F in repair second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 35mm thick (factory made) glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed.

S&F for 25 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roof, ceiling, partition, facia, barge, soffit etc (except flooring and skirting) complete all as specified and directed.

S&F factory made 35 mm thick IInd class hardwood Glazed & skeleton shutters, open rebated & prepare to receive gauze, divided into squares, with plain, chamfered and rounded,mitred and rebated sash bars, any numbers size of members of shutter as specidied in SSR Part-I section 8 (clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

Dismantling of boarding any description, fixed in any position with nails for cupboards complete all as specified and directed.

S&F GI metal suspended ceiling system OREO GI lay in plain of 600 x 600 x 0.5mm (TEGULAR) edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified & directed.

S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads etc in squares n.exe 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F Butt hinges 50 mm size medium weight cold rolled mild steel and fixed complete all as specified and directed.

M&L for 2nd class hard wood small fittings such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours, articles n exc 200 cucm each compete all as specified and directed.

S&F mild steel barrel tower bolt 200mm long stove enameled black with bright bolt complete all as specified and directed

S&F 300mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 150mm long mild steel pressed handle stove enameled black oval type complete all as specified and directed

S&F 125mm long mild steel pressed handle stove enameled black oval type complete all as specified and directed

S & F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair curtain rods of 20mm dia, mild steel PVC coated including fixing brackets, stopes, rollers etc. complete all as specified and directed.

Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.

Taking up or down 20mm bore, steel water tubing & connections complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repair 15mm dia stop valve, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S & F in repair 20mm bore Stop valves cast copper alloy, chromium plated, screwed down high pre-ssure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed

S& F in repair 15mm dia PVC connection pipe with PTMT nuts of length 450mm long complete all as specified and directed.

Dismantling water tanks exc. 500 ltrs & n. exc. 1000 ltrs capacity and removing from site complete all as specified and directed

S&F in repair vitreous china wash water closet pan ( Pedestal pattern) white fixed in floor including P or S trap, connecting to drain (or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 600x480mm including brackets, CP brass coupling, CP pillar tap 15mm dia and PVC waste pipe complete all as specified and directed

S & F in repair 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repair soap dish chromium plated of size 180mm x 160mm x 90mm thick any type, fixed to wall with brass screws and cup washer complete all as specified.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges ccomplete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channels and drains including necessay form work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified and directed.

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

S&F mild steel barrel tower bolt 150mm long stove enameled black with bright bolt complete all as specified and directed

Dismantling of cast iron / reinforced concrete drain pipe 75 mm to 100 mm dia jointed in cement mortar and taking out of trenches or wall if required, complete all as specified and directed.

S&F PVC (SWR) pipes, 75mm dia single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed

S&F 110 mm bore PVC (SWR) reducer, single, equal or un-equal of any length incl jointing with solvent cement as required complete all as specified.

S&F PVC (SWR) vent cowl of size 75 mm bore complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of of white / approved shade over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing old surface of steel & iron surfaces of any description over 10 cm in width or girth , and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint of any tint on external wall surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, preparation of surfaces for further treatment and applying two coats of oil bound distemper (white/Approved shade) over a coat of wall care putty (2-3mm thick), complete all as specified and directed .

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer on plastered surface complete all as specified and direceted.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern in roof covering, compete all as specified and directed.

S&F plain, galvanised, 0.63mm thick,mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings and facia board ornamental type (length and girth as fixed) complete all as specified and directed.

Dismantling timber scantlings over 40 sq cm in section in any position (unframed work) complete all as specified and directed.

M&L for IInd class hard wood timber scantling clean sawn secured with nails timber framed and fixed in framed work complete all as specified and directed

M&L for IInd class hard wood timber scantling clean sawn secured with nails timber framed and fixed in framed work but except timber, complete all as specified and directed

M&L for Mild steel sheet eaves gutters, 1mm thick 150mm dia galvanised class 3, half roundwith rounded edges incl suitable bracket for gutter and required PVC pipe of 110mm dia, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade with grey cement and no pigment set, complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC Casing-N-Caping with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 130.00 here-in-before but for one 3/5 pin socket 5 Amp on same board complete all as specified and directed

All as per item No 130.00 here-in-before but for one 3/5 pin socket 5 Amp on independent board with 2.5 Sqmm wire and 2.5 Sqmm earth wire, complete all as specified and directed

All as per item No 130.00 here-in-before but for 3 pins socket outlet 15A independent with 4 sq mm wire and 4 sqmm earth wire complete all as specified and directed.

S&F switch piano flush type, 5 Amps, single pole one way complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5A (multi purpose) complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5/15A (multi purpose) complete all as specified and directed

S&F switch piano flush type, 15 Amps, single pole one way complete all as specified and directed

S&F ceiling rose, PVC/ Polycarbonate isolated body, surface backlite, 65x50mm three terminals complete all as specified and directed

S&F batten holder PVC/ Polycarbonate type with base/ back plate suitable for LED Lamp, incl 9 watt LED bulb, B-22, pin type 230 Volts, complete all as specified and directed

S&F skylight recess mounting type 36W, LED 2'x2' luminaire, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed.

S & F LED tube light fittings 20W (4 feet,5700K) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings incl taking down old unserviceable light fittings of any type and any size complete all as specified and directed.

S&F in repairs LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed.

M&L for submain wiring with 2X10 Sqmm+1X6.00 Sqmm earth wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly drwan in and including heavy duty PVC casing-n-caping 25mm dia incl dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. Note: Two run of 10sqmm and 1 Run of 6sqmm wire and 1 Run of PVC casing-n-caping shall be measured as One RM.

S & F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.

S&F MCB SPN 40-63 amp rating 240V, 10KA incl all termnials, fitting etc incl taking down old complete all as specified and directed.

S&F MCB SP 6-40 amp rating 240V, 10KA incl all termnials, fitting etc incl taking down old complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 280/300m sweep, 900 RPM with, blades, and frame and louvers shutter with fastner nut bolts washer etc complete including electrical connection with copper cable from ceiling rose to exhaust fan including taking down old exhaust fan to MES store yard complete all as specified and directed.

M/S Shiv Kumar

JASWANT SINGH ANAND

NIRMAL SINGH BHOGAL AND SON

M/S JOHN VASSELLY

M/S Jaswant Kumar Aggarwal