Repair and Renovation(G-1)

Amount

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.1

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.3

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.4

Providing designation 75-A brick work in C.M. (1:6) in super-structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. BCD 5.2.3

Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. BCD 5.3.2.1

Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in BEAM with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. BCD 5.3.11

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns,roof slab,beam BCD 5.3.17

5.3.17.6 COLUMN

5.3.17.3 ROOF SLAB

Providing T.M.T. Reinforcement FE 500 of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (APPROVED BRAND - TATA/ SAIL) BCD 5.5

5.5.4 8MM DIA. = 30 % OF TOTAL

5.5.6 B 12 MM -16 MM DIA. DIA. = 40 % OF TOTAL

Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I . BCD 5.7.6

Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. BCD 5.7.15

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty with all complete as per building specification and direction of E/I.BCD 5.6.10

Providing P.C.C. M-15 with nominal mix of (1:2:4) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, , mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. BCD 5.3.1.2

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying 25 mm thick kotah stone slab flooring of approved texture,size and colour over-do- all comp. (iv) 600x600 mm size. BCD 5.6.19

Providing and laying 25 mm thick kotah stone tiles in risers of steps,skirting and pillars of approved texture,size and colour over-do- all comp. (iv) 600x600 mm size. BCD 5.6.20

Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I BCD 5.7.3

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the urface evn and smooth. DSR 13.26

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over a new surface including preparing the plastered surface by rubbing smooth, with pumice stone or fine sand paper applying putty wherever required scalfolding. washing of floors and taxes. all complete as per building specification and direc tion of E/I.BCD 5.8.21

Providing and applying white cement based putty of average 1 mm thickness over plastered surface to prepare the urface evn and smooth. DSR 13.80

Finishing walls with textured exterior paint of required shade --do-- all comp. DSR 13.45.1

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) BCD 5.5.12

Providing and fixing glazing in aluminium doors,windows ventilators shutters and partition etc. with EPDM rubber/neoprene gasket-- direction of E/I. With float glass pannes of 4mm thickness. DSR 21.3.1

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning,removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) BCD 5.8.41

Providing two coats of painting with synthetic enamel paint with one coat of primer of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. BCD 5.8.45

Supplying, fitting, and fixing 32 mm thick good quality dreessed and well seasoned sal wood with 25 mm thick panels -do -as per building specification . BCD 5.4.27

Providing two coats of painting with synthetic enamel paint with one coat of primer of approved shade and make over wooden surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. BCD 5.8.31

Providing and fixing Fan Hooks of 16 mm dia M.S. Bar 1m long ----- complete as per direction of E/I. BCD 5.5.13

CARRAIGE OF MATERIALS

(I)CEMENT+STEEL

(II)SAND

(III)STONE CHIPS

(IV)BRICKS

Water proofing of old and new roof slab :- providing and laying water proofing treatment on roof slab by applying two components,factory designed ----do---- all comp. BCD 5.12.1

EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I .5.1.1/BCD

Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) 5.1.10/BCD

Providing designation 75- A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.6.1/BCD

Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including , mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. 5.3.1.1/BCD

Providing designation 75-A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.2.11/BCD

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, BCD 5.3.17.1

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. 5.8.24/BCD

Providing earth work in filling in compound by carriage all complete as per direction of E/I 5.1.8/BCD

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 16.53/DSR

Supplying,fitting and fixing 40x40x4 mm IS2062 Grade A M.S. angle,hoisting, welded with 6 mm dia. And 75 mm long M.S rods,anchorage fixed in concrete steps at the time of casting including taxes all complete as per direction of E/I. 5.5.23/BCD

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Energy 1.3.2 Group B Pg No-66

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Energy 1.5 Pg No-66

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.Energy 1.7 Pg No-67

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

1.7.11 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required..Energy 1.21 Pg No-69

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Energy 1.24 Pg No-70

1.24.1 5/6 A switch

1.24.4 3 pin 5/6 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Energy 1.25 Pg No-70

Supplying and fixing suitable size GI/PVC box of 121mm x 173mm x 48mm (6"x8") (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. Energy 1.30 Pg No-71

Supplying and fixing following three pole and neutral sheet. MCB distribution board.415 V …. As required 4 way (8+12), TPN, vertical type, MCB DB, double door Energy 2.10.3 Pg No-77

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Energy 2.12.1 Single pole Pg No-78

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.Energy 2.14.1 Pg No-78 40A TPN

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal/ coke and salt ) as required Energy 3.2 Pg No-80

Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.Energy 3.7 Pg No-80

Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.Energy 4.2 Pg No-82

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.Energy 4.4 Pg No-82

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)Energy 4.7 Pg No-82

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)Energy 4.8 Pg No-82

Providing and fixing of 1200 mm Ceiling Fan M-772 Pg No-52

Providing and fixing of 50/60 watt LED Flood Light Energy 9.2.2 Pg No-89

Providing and fixing of wall/ceiling light fixtures with 15/16W CFL lamp. Energy M-856 Pg No-54

Supplying fitting and fixing vitreous white glazed earthen ware I.W.C of Parry,Hindustan or any other I.S.S. approved make -----direction of E/I. 580 mm long with 12.5 lit low level PVC Cistern

providing and fixing C P.V.Cpipes -----direction of E/I.

25 mm dia nominal bore

External work - 40 mm dia nominal bore

providing and fixing on wall face unplasticised -PVC moulded fittings/accessories ------- direction of E/I.

single Tee with door (110x110x110 mm)

Single pushfit coupler

providing and fixing on wall face unplasticised - rigid P.V.C pipes -110 mm dia..

Supplying fitting and fixing vitreous white glazed earthen ware wash hand Basin of Hindustan,Parry or any other I.S.S. approved make -----direction of E/I. Flat Back or standing Corner 25mm to 40 mm nominal bore 3.2.5

Making connection of G.I.distribution branch with G.I. main -------direction of E/I. 25mm to 40 mmnominal bore.

Providing and fixing gun metal non return valve of approved quality -------direction of E/I. 25mm nominal bore DSR 18.19.1

Providing and fixing gun metal full way valvevalve of approved quality-------direction of E/I. 25mm nominal bore

Supplying,fitting and fixing the following items complete with all materials -------direction of E/I. mirror 600x450 mm 3.1.21

Providing and fixing C.P.brass bib cock of approved quality-------direction of E/I. (15 mm nominal bore) Bib cock long thread

Polythene water storage tank of mark with cover and suitable locking system in double layer

Providing and fixing factory made PVC door frame of size 50x47 mm with a wall thickness of 5mm --do-- all comp.

Providing and fixing 30 mm thick factory made panel PVC door shutter --do-- all comp.

Providing and laying rectified glazed ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Making plinth protection 50 mm thick of cement concrete (1:3:6) over 75 mm dry brick ballast ---- all complete as per direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Supplying,fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20X'10X2 mm. at 100mm. Centres and braced with M.S. flat diagonals 20 X 3mm, with top and bottom rails of T. iron 40x40x6mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification arrd direction E/I.BCD 5.5.14 Pg No-120.

Extra earthwork in hard soil (vide classification of soil item -B) all complete as per specification and direction of E/I.

Providing designation 75A one brick flat soling joints filled with local sand --- direction of E/I.

Providing R.C.C. M-200 with nominal mix of (1:1½:3) in Stiffner-- with approved quality of stone chips 20 mmto 6 mm size graded and clean coarse sand -- all complete as per specification and direction of E/I.

Providing 125 mm thick reinfoced Brick work in C.M.(1:4) --- direction of E/I.

Providing 12 mm thick Plaster in C.M (1:4) with clean coarse sand of F.M.1.5 -- all complete as per specification and direction of E/I.

Providing 1.5 mm cement punning -- all complete as per specification and direction of E/I.

Providing M.S.footrest including fixing manholes with 20x20x10 cm concrete Block 1:3:6 as per standard design

Provioding and Fixing S.W.intercepting trap in man holes with stiff mixture of cement mortar 1:1 including testing of joints etc. complete 150 mm dia

Providing and fixing soil,waste and vent pipes , Sand cast iron S&S pipe 100 mm dia

Constructing Soak Pit 1.2x1.2x1.2 m Filled With Bricks Bat Including S.W Drain Pipe 100mm Dia All Complete Job

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.3.1 Group A

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit, 2 way modular switch,modular plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27.1 1 or 2 Module (78mmX78mmX45mm)

Providing and fixing of wall/ceiling light fixtures with 9/10 w CFL/LED lamp.

Supplying all materials, labour and tools and equipment for drilling 125 x 115 mm dia bore well in any kinds of soil and rocks by using D.T.H. super rig machine and ball hammer technology including all technology inclusive of mobilization, demobilization of rigs air compressor all accessories of rigs tools and plant labour etc. all complete job including transportation charge cost of flushing charge, geographical investigation etc. all complete

(a) 0.00m Up to 30.00m depth below G.L. In Rural Areas (DWSD 118)

(b) 30.000m Up to 120.00m depth beyond . In Rural Areas

Basic rate of 125mmdia Blue UPVC Casing pipe Confirming to I.S.I . latest revision IS(12818)/2016 C.M.L. No-5543459 (DWSD 108)

Supplying all materials, labour and inserting UPVC blue pipe 125 mm internal dia casing pipe for protecting the bore hole in over burden up to hard surface as per IS 12818-1392 with latest revision all complete job with taxes as per specification and direction of E/I. (DWSD 125)

Supplying labour cement and calcium chloride or bentonite solution and equipment’s for grouting Casing pipe (DWSD 127)

Supplying labour ,cement and calcium chloride or betonies solution and equipment’s for grouting to casing pipe after lowering in the bore etc .all complete as per specification and direction of E/I(DWSD 126)

Supplying labours and equipment’s including 125mm dia G.I. Cap & fitting and fixing over the casing pipe of bore well properly and taking it out as per direction of E/(DWSD 128)

Supplying materials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mmx450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mmx475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I (Annexure I Attached)

Supplying submersible pumps set conforming to IS 8034 and motor conforming to IS:9283 ------do----- submersible pump set 100 mm dia. Upto 20 stage -2.0 HP

Goods & Services Tax (G.S.T.) @ 18%

Labour Cess @ 1%

AADARSH CONSTRUCTION (BID ID -642878)