PROVN OF TWO TOILETS FOR STUDENT OFFRS AT IW DIV OF SC WG AT AWC UNDER GE (AWC) MHOW

Amount

Excavating in trenches in Soft/ loose soil, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete.

Excavating in trenches in Soft / disintegrated rock n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material/soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M & L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.

M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M & L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, .complete all as specified and directed.

M & L for RCC 1:1.5:3 type A-1, using 20 mm graded stone aggregate as in column footing including raft footings, foundation, plinth beam, bases of columns etc. complete all as specified and directed.

M & L for RCC 1:1.5:3 type A1using 20 mm graded stone aggregate as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC type A-1, 1:1.5:3 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves and the like complete all as specified and directed

Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical surfaces complete all as specified and directed.

Use and waste form work rough finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars etc.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200 mm thick surface of concrete complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel beam , cantilevers, shelves etc complete all as specified and directed.

S & F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed.

Description same as per item No. 18.00 but 6 mm to 8 mm dia complete all as specified and directed.

Description same as per item No. 18.00 but 5 mm dia and over upto and including 10mm dia in stirrups spacers and binders quality confirming to TMT bar complete all as specified and directed.

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on Fair Faces of Brick Wall, Cement block wall or on Concrete Surfaces, Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed.(WPC will be measured and paid separately)

Supply only integral water proofing compound complete. Make:- Water Seal rom Acro Paints, Pidlite Industries Ltd, Accorproof from ACC

M&L for 12 mm thick rendering on brick work or concrete surfaces of internal wall in cement mortar 1:6 surface complete all as specified and directed.

M & L Preparation of newly plastered surface and apply two coat of cement base paint over coat of wall primer complete all as specified and directed.

M & L preparation on newly plastered surface apply two coat oilbound distemper over coat of wall primer complete all as specified and directed.

M&L for Sand filling under floors or in foundations including spreading, levelling, watering, consolidation, over and under the under ground cable in trenches, ducts for cable protection complete all as specified and directed.

M & L 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for flooring complete all as specified and directed.

M & L Cement concrete 25 mm thick type B-1, 1:2:4 (20mm graded aggregate) as in level course.

M & L 25mm thick Damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4 Type B 0 including necessary formwork etc complete all as specified and directed.

M & L applying evenly a coat of blow type bitumen at the rate of 1.50kg per square metre and blinding with clean dry sand @ 0.05 cu.m per sq. m complete all as specified and directed.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, 300mmx200mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

M & L Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid for table top wash basin, cutting to round oval , round or any shape for fixng of table top wash basin and also fixing of granite to wall in vertical as in partition wall to urinal etc, complete all as specified and directed.

Rounding to edges of stone slabs one edges, or two edges such as in steps, cooking platform, partition and other similar situations, complete all as specified and dorected.

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I complete all as specified and directed

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete.

S & F vitreous china wash hand basin white counter top fixed on granite slab including necessary fitting like brass waste coupling , complete assessories , PVC waste pipe including fixing of tap, waste fitting etc complete. Note :- Pillar tap shall be measured as supply only under respective item . Make : Jaquar CAT Part NO CNS-WHT-601, CERA - CLAIR 1023, Parryware- AQUARIUS Cat No C0466.

Supply only 15 mm dia Piller tap, cast copper alloy with capstain heads, fancy type chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and drected. Make : Jaquar Cat No FON-40011 , Plumber Cat No NEC-0103L, Pearl - Cat No ARI - 008

S & F 32 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and complete all as specified and directed.

Supplying, fixing, 15mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

Supplying, fixing, 20 mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

S & F 10 litre capacity PVC low level valveless, syphonic action type flushing cistern, white, with inlet, ball valve, float and handle includung 32 mm dia PVC pipe for conneting to EWC complete all as specified and directed.

S&F powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE)

S & F PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F vitreous china Urinal , Half stall type white with waste pipe and union for discharge pipe (excluding flushing cistern,flush pipe) including brass waste coupling complete all as specified and as directed.

S & F High density polythylene pipes (HDPE) of pressure rating 6 kgf/cmsq fixed complete to walls , ceilings or in floors etc complete all as specified and directed.

S & F PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed. Make - Cat part No IT-1940Mof Plumber , Catpart No HF-130 of Pearl, Cat part No ALD-CHR-583 of Jaquar

S&F CP Soap Dish with ABS dish Holder, complete all as specified and directed by Engineer-incharge. Make - Cat part No U-0913 Mof Plumber , Catpart No BAB-398 of Pearl, Cat part No AKP-35751 of Jaquar complete all as specified and directed.

S&F CP Toilet paper holder, complete all as specified and directed by Engineer-incharge. Make:- Plumber Cat Part No. U-0916 , Pearl Cat part No 18051, Jaquar cat part No CAN-1153N.

S & F brass chromium plated angle cock with wall flange 15 mm dia screwed for iron pipe or brass ferrule, complete. Make : Plumber Cat No FLP-0507. Pearl Cat part No MAP -904, Jaquar Cat part No FLR-5053N complete all as specified .

S & F 15 mm bore two way bib taps chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.. Make : Plumber Cat part No EC0209 . Pearl Cat part No BELL-455 , Jaquar Cat Part No FLR-5041N complete all as specified and directed.

S & F brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make - Cat part No U-0911 of Plumber , Catpart No BAB-400 of Pearl, Cat part No ACN1111NM of Jaquar.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by GE/Engineer-in-Charge.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete .

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F 150 mm size aluminium handles cast type, anodised ISI marked complete

S & F 200 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

M&L for Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L for 150 mm thick Hard core of broken stone/boulder , broken to gauge n exc 63 mm.complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete.

M&L 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base to foot path etc.

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S & F Concealed type Urinal sensar unit including all including necessary assessories, batteries or any type of assessorioes for workable condition , complete and connection pipe , urinal spreader, fixing to GI pipe or any PVC pipe complete all as specified and directed. Make :- Jaquar Sensor Urinal SNR-STL-51083 Sensotronic Mini Conceal Model-Sensotronic Cat Part No - SNR-STL-51083. Johnson Urinal Sensor MUS 1 Sensor Taps, Cat Part No- T1933C.

M & L Precast cement concrete block Type B1 1:2:4 (20 mm graded aggregate) masonry with solid blocks exc 10 cm in width and grouting and setting in cement mortar 1:6 complete all as directed and specified.

S & F Machine pressed precast concrete intelocking paver block any shape & size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade set with grey cement and pigment including packing of side with PCC 1:2:4 complete all as specified and directed.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 150 mm internal dia of pipe complete all as specified and directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe of size 150 mm internal dia of pipe grade 'A' confirming to IS-651-1980 laid in trenches and jointed cement kmortar 1:1 complete all as specified and directed.

S & F Joist, channel, angle or tee , square or rectangular sections, beam , etc fixed indipendently including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting plates with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).Note :- Fabrication like cutting , welding, bending , or any other nature of work shall be at site or shop including in above rate.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed.

S & F Anodised aluminium sanp grid frame work of size 605 x 605 mm for flase ceiling Slope or Flat securing with 4 mm dia GI wire of 1.20 mtr centre to centre tying to roof members or bolting with self taping screws including all necessar y arrengements complete all as specified and directed.

M & L 4 mm thick Non asbestos fibre cement building boardsof size 600 x 600 mm fixed or laid to Aluminium frame work with screws ,staples on snap grid as in slope or flat ceiling complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly complete all as specified and directed for one light / fan/ bell controlled by one ,one way switch 5/6 Amps. Make :- V Marc, Polycab, Havell's, RR Kabel

Description same all as per item No 85.00 here in before but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch.

M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed . Make :- V Marc, Polycab, Havell's, RR Kabel

Supply and fixing modular metal flush box 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V . Make:- Anchor , Legrand,Crabtree (Havell's)

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F modular switch 1 way 16 A , 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F switch socket combination modular type multipurposes 6/16 A, 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed. Make:-Havells cat part No- cat No :-LUMILINEPLUSBS 20WLED865SPCSS / WIPRO cat part No :- D532065 /Bajaj Cat part No:-BCLSB20WH

Supply and fixing wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED fitting 2 feet long complete all as specified and directed. Make:- Havells cat part No- cat No :-LUMILINEPLUSBS 10WLED865SPCSS / WIPRO cat part No :- D531065 /Bajaj Cat part No:-BCLSB10WH

S & F LED street light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed. Make:- Havells Cat No. ENDURACITYLITEPLATPLUSSL 30WLED757SASYBOPC / WIPRO cat part No :-LR02-291-XXX-57-XX / Bajaj Cat part No:-169887

Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity complete all as specified. Make : L&T Cat No :-DBSPN008DD HPL Cat pt No- DBECOTDD08 / Indo Asian Cat No-811806

Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB20400C HPL Cat pt No- TSPNC40 / Indo Asian Cat No-811152

Supply only MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB10320C HPL Cat pt No- TSPC6-32 / Indo Asian Cat No-811129

S&F exhaust fan AC single phase 230 volt 300 mm sweep, 900 RPM with louver complete all as specified and directed. Make:- Bajaj Model Supreme Plus Cat No.-70069 / Havells model Turbo Force SP / Usha Model Turbo Heavy Duty

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

S & laying reinforced precast concrete cable cover class LV, type 1 flat, size 250x150mmx40mm.

Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 10 sqmm, 2 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade complete all as specified laid in tenches / laid under floor or fixed with walls/ on poles/ in ducts/ in GI pipes etc including taking down existing complete all as directed at site. Make:- Finolex,RPG(Asian),RR Kable, Universal

Jyoti enterprises

Robin Associates