Improvement of Rural WSS for village Mirpur Kalan in Block Sardulgarh Distt Mansa Repair of S and S Tank Repair of Pump Chamber Repair of OHSR Head Works water connection to house hold Repair of existing connection Distribution Syst

Amount

Earth work excavation in ordinary soil, exclusive of compensation of earth

Extra for laying earth/fly ash as per specifications for compaction in 20 cm layers and dressing but excluding cost of rolling.

Earth work in excavation in foundations, trenches etc.in all kinds of soil where pick jumper work is notinvolved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation including disposal of surplus spoils as direct lead 30 mtr

Cement Concrete 1:6:12 with 40mm gauge stone aggregate

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling.

12.5 mm thick cement plaster 1:4

White washing (3 coats) inside

Finishing walls with exterior decorative cement based paints such as snocem Robbiacem etc. on new work two coats to give an even shade.

Applying pink primer including painting 2 coats excluding priming coat with synthetic enemel paint in all shades on wood work metallic or plastered

Hollock wood, doors, shutter, windows, shutter including hinges, screws, chocks, cheats, stops, cords etc. complete fixed in position i)

Panelled,glazed or glazed and panelled (double Leaf)

35 mm thick

Cost of aluminium fitting complete for doors and windows such as tower bplts ,handels and screws excluding sliding bolt)

For Shutter area above 0.50 sqm

Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, lock-notch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.

Doors and Window frame of size 118 mm x60 mm with 40 mm wide single rebate weighting 3.43 Kg per meter

Suppling and fixing of ISI Marked CI D joint (Complete with nut bolts and rubber ring) as per IS : 8794 for repair of pipe line including cutting jointing and testing etc but excluding cost of excavation complete

Providing & fixing C.I./DI flanged end.,stem of ss(AIS 1410)and Bronze(Gun Metal ) working part sluice valve ISI marked 14846 -2000 .including jointing testing and cost of Nut Bolt and insertion sheet ,all carriage complete(with the approval of engineer- in-charge)

Class PN-1 as per ISI

Providing, String out P . V. C Pipes ISI Marked as per ISI- 4985 (Premium Make or Equivalent) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including specials complete as per specifications and excavation of pipe line by Mechanically, minimum cover on pipe One meter(6kg/cm2 pressure)

Construction of masonary Sluice Valve Chamber excluding sluice valve cover as per standard design and drawing of public health deptt.

Size(0.60x0.60m)

Providing & fixing of 200 mm i/d floating arm including S.V., Survival bend, drum, extended rod with hand wheel bractes and guiders complete in all respects.

Supplying and fixing steel ladder for out side DOM complete in all respects

Providing and fixing CI FT assembly with Nut bolt etc Complete in all respects (80 mm I/d)

Making conection New pipe line to existing pipe line including excavation,specials such as tee bend socketelbow etc complete in all respect.

Providing house hold connection incuding laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel, spindle, 15mm i/d GI pipe 2.50 Mtr. and 15 mm i/d MDPE pipe 2 meter (length on average basis) 3" i/d UPVC clamp, ISI marked G.M. ferruleas per IS:2692 connection of 15mm I/D ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm % 150mm) Union Copplings, GI hooks etc.cutting threading making hole in wall and testing in treanches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1,28.36,28.34 B,30.65 B)

Repair of existing House Hold connection Providing and laying, jointing, fixing, testing GI Pipe lines including cost of Specials such as tees, bends, sockets, elbow etc. cutting, threading and testing in trenches, ISI Marked G.M. ferrule 15 mm i/d as per IS:2692, drilling and tapping cost iron pipe lines of all diameters and screwing in ferrule,GI Nipple including excavation complete in all respect

Credit for old Floating arms

DHARAMPAL CONTRACTOR