Urgent repairing work along with Supply and fixing of various materials to overcome emergency situations of different sites under MMCES2/PWD.

Amount

Supply & delivery of 1.1 KV, XLPE insulated 1100V grade as per IS 7098 (part-1) 1988 armoured sheathed Aluminium conductor cable as mentioned below. (Make- Polycab/Havells/Gloster/RR Kabel as approved by EIC)

(i) 4 core 300 sqmm

S & Laying of 10'' Hume pipe with connecting socket as required.

Charges for cuttings of Pitch road & PCC road on an avg depth of 2.5ft and 3 ft width with Co. Own equipment for laying 10'' dia hume pipe for cable crossing and mending good damages with proper concrete mixture to original finish as per direction of EIC.

S & installation of 4' x 4' and 3'' thick RCC slab for covering the existing road side drain for safety purpose as per direction of EIC.

S & F of 40x40 mm MS Angle frame fixed with bullet fastnut or making hole on the wall & fixing the same for holding cables with making hole, S & F suitable nuts-bolts, metal saddle etc. as required, mending good damages and painting.

Supplying & Fixing GI waterproof type looping cable box size 275x250x100 mm deep having 2 mm thick comprising of one NL on porcelain insulator, one 4 way terminal, one compression type brass cable gland for upto 2/4- core 16 sqmm PVC/A 15 cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Charges for dismantling one no. 9 mtr octagonal pole and one no. 9 mtr ST pole with all set manually or using hydra and supply to the section office as per direction of EIC.

Supplying and fixing 415 V Four Pole 250A MCCB of Breaking capacity 25kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

S & f of 25sqmm cupper cable/wire (approved make) suitable size for fixing the above MCCB into the existing VTPN DB inplace of outgoing spreader link as per situation and as per direction of EIC.

S and D of recessed mounted type (2'x2') LED Down light fittings for fixing on fall ceiling with the clipping arrangement and mending good damages to original finish. (Make- Philips-RC370B LED36S-6500 G6 L60W60 PSU OD V3/Bajaj/wipro)

Note: 1) All the above rates should be quoted inclusive of all taxes & duties, District charges, Riverine charges and LWC as applicable, with cost of maintenance, servicing, supply & replacement of spares for 1 (one) years from the date of commissioning. 2) The Agency must procure the materials from the manufacture/OEM or their authorised sales Channel so that the standard warranty/support of the manufacturerer/OEM becomes applicable to the product to be delivered and installed by them. Documents that authenticate such procurement from the manufacturer/OEM or from their authorised sales Channel and standard warranty/support should be sent from the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill. If any refubrished materials are supplied and installed, penal action will be taken as per existing rule. Before execution of the work the prospective bider has to submit layout drawing as per design of OEM dully approved by the OEM. 3) Total is rounded off to the nearest rupees.

M S KAMAL SHAW (BID ID -6962603)

M/S SREE GURU CONSTRUCTION (BID ID -6944182)