Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹75,000
Closing Date
15 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION Vimanapura Post Bangalore - 560 017
OUTSOURCING OF PRODUCTION OF ELECTRICAL LOOM BOARD ASSEMBLIES FOR THE LCA MK1A PROGRAM
9480
A/OPEN TENDER/ESP/LCAMK1A-207/1/24
Works
Bangalore Complex- Aircraft Divn
₹0
₹75,000
15 Oct 2024
3 Sept 2024
3 Sept 2024
15 Oct 2024
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION, BANGALORE COMPLEX POST BAG NO. 1788, VIMANAPURA POST, BANGALORE-560 017 INDIA Phone: +91 80 22321585, Fax +91 80 22315188 Web Site: www.hal-india.com
ANNEXURE-I TECHNICAL BID
Tender Ref No. A/OPEN TENDER/ESP/LCAMK1A-207/1/24 Dtd 03.09.2024 Tender Due Date: 23-09-2024
Scope of Supply OUTSOURCING OF PRODUCTION OF ELECTRICAL LOOM BOARD ASSEMBLIES FOR THE LCA MK1A PROGRAM. (ON PACKAGEWISE L1 OFFER BASIS)-(OPEN TENDER - TWO BID SYSTEM)
Name of the Tenderer / Bidder
Quotation Reference Number
TECHINCAL BID Vendor need to upload this compliance sheet of Technical Bid for evaluation of Tender (TECHNICAL BID)
PLEASE INDICATE YOUR RESPONSE TO THE FOLLOWING TERMS AND UPLOAD AS A PART OF TECHNICAL BID. BIDDERS TO ENSURE NO PRICES ARE INDICATED IN THIS SHEET OR ANY WHERE IN THE TECHNICAL BID EVEN IN THE FORM OF PDF, IN CASE PRICES ARE ENTERED IN TECHNICAL BID, THE OFFER WILL BE SUMMARILY REJECTED. PRICES SHOULD BE ENTERED ONLY IN PRICE BID.
A For Manufacturing and Supply of Loom Assemblies (Supplier Scope of Work) Category (Essential/ Desirable) Indicate "Complied/Not Complied" Vendor's Remarks if any
1 APPLICABLE DOCUMENTS: Supplier shall comply with the following documents during fabrication and supply. Supplier shall follow the latest revision levels that are applicable at the time of fabrication: -LCA WIRING MANUAL / VENDOR CATALOGUE/DOCUMENT ON ELECTRCIAL LOOM FABRICATION. -LCA MK1A DRAWINGS, MATERIAL SCHEDULE AND CABLE LIST -LCA BOARD DRAWINGS -PRODUCTION QUERY DISPOSITIONS -ROUTE CARDS Essential
2 WORK SCOPE: -All Production of looms that shall be ordered will be manufactured and tested in conformance with applicable documents mentioned in this SSOW by the supplier. - All project materials used in the manufacture of the cable assemblies like cables, sleeves, labels, connectors, back shells, switches, lacing cord, tie-wraps, brackets, etc will be supplied by HAL. - Non Project Consumables like cotton thread, masking tape, cleaning agent, acetone etc to be borne by the supplier. - Hand tools like wire strippers/blades (for light weight cables and conventional cables), crimping pliers, locators, dies, banding tools, nippers, knives/hot knives/hot tweezers, scissors, industrial multimeters, IR/Megger meters, hot air guns, soldering stations, power supplies etc and equipments like computer, laser printer etc to be borne by the supplier. The list of tools/specification details shall be provided by HAL. Essential
3 NATURE OF WORK AND PROCESS SPECIFICATIONS: (i) Printing on wires shall be made by Laser Wire Marking i.a.w with the printing files provided by HAL. (ii) Printing on sleeves shall be made by Thermal transfer printer i.a.w with the printing files provided by HAL. (iii) Printing on labels shall be made by Thermal transfer printer i.a.w with the printing files provided by HAL. (iv) Stripping of wires shall be made i.a.w LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012. (v) Solder Sleeve shall be made i.a.w LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012. (vi) Termination of single & multi core wires shall be made i.a.w LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012. & Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011. (vii) Splices shall be made i.a.w LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012. & Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011. (viii) EMC coding of wires shall be made i.a.w Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011. (ix) Protective sleeve shall be made i.a.w Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011. (x) Back shell and Moulded parts i.a.w Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011 (xi) Connector and End finalizations shall be made as per standards referred in LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012.. (xii) Electrical Connections shall be made as per LCA MK1A Drawings and cable list. (xiii) POTTING for Submerged Connectors shall be made as per HAL-ARDCLCA_ELE_051 (xiv) Bonding and Earthing surface preparation shall be made as per HALARDC-LCA-ELE-184 (xv) HAL/ARDC/LCA-MK1A/ELE/010 shall be referred for fabricating and finalising Arinc818 video cables with Octonet contacts. (xvi) Authenticated copy of printing files will be provided by HAL for printing on wires/cables, sleeves, labels. Note: Supplier shall follow the latest revision levels that are applicable at the time of fabrication. Essential
4 TESTING AND INSPECTION: Looms acceptance Test shall be performed at Supplier's facilities. Supplier shall perform inspection along the manufacturing process, in order to confirm to requirements of applicable documents. -Visual inspection -Wiring continuity -High voltage test, where applicable -500 VDC Insulation test -Electrical bonding test, where applicable Supplier shall establish and maintain a quality control system. Supplier shall prepare the documents as per QAP. Supplier shall prepare the process sheets and obtain due approval from HAL Continuity and Megger checks are to be carried out by Supplier after every loom fabrication Essential
5 FIRST ARTICLE INSPECTION: Supplier shall perform, to the satisfaction of HAL, First Article Inspection (FAI) on each relevant part, sub-assembly and assembly of such first Production of looms in accordance with the First Article Inspection procedures and requirement set forth by Quality Assurance of HAL. Essential
6 TOOLING: Supplier shall be required to buy, Fabrication, Assembly and Inspection Tooling that shall be capable of producing looms. Procurement of Instruments and Equipment, hand tools and manufacturing of loom board to carryout LCA MK1A looms is at Suppliers expense and no cost to be accounted to HAL. Supplier shall use calibrated tools / test equipment for loom manufacturing /testing. The Supplier shall use Loom Board drawings (updated to the latest engineering information) hard copy and a computer file duly vetted by HAL QC in concurrence with certifying agencies. Essential
7 Availability of tools and equipment at 70% -80% level is a acceptance criteria. Supplier should give an undertaking to procure balance 20-30% of tools and equipment required for execution . Essential
8 MANPOWER REQUIREMENTS: The Supplier undertakes to employ only suitable skilled (Electrician should hold soldering process certification), competent and qualified personnel in performing the Supplier’s allocated tasks according to the terms of the Agreement. Essential
9 QUALITY ASSURANCE: Any clarification during the fabrication of the looms to be intimated by the supplier to HAL for clarification and work to be continued only on receiving the disposition, to avoid unnecessary rejections/snags. Supplier shall rework (to confirm the applicable Manufacturing and Assembly drawings) in-case of any non-conformance on product, at its own expense. In the event of rejection of a Product, HAL will issue a Part Disposition Report. Supplier shall investigate the cause of the rejection and shall immediately commence corrective action. Essential
10 QUALITY REQUIREMENTS: a. All the acceptance criteria and inspection requirements to be followed by Supplier shall be as per Quality Assurance Plan of HAL QA approved by ORDAQA/DGAQA, for manufacturing of MK1A Looms Assemblies which will be provided before the placement of P.O. b. Vendor shall supply certified assembly with Accepted Tags, Work done Test report , COC in co-ordination with HAL QA/ ORDAQA and shall ensure that the completed and accepted assemblies are packed and stored together and appropriately protected to prevent damage during transportation for moving to the next stage. c. Work order system as per work order Number of Route card should be maintained by Vendor to ensure traceability which would be subject to scrutiny by HAL d. First Article Inspection (FAI) for 21 Nos. Looms assembly of 1stAircraft: FAIR shall be done in accordance with AS9102. FAI done by the firm shall be inspected, verified and clearance to be taken from M/s HAL- QA in concurrence with DGAQA before undertaking batch production. e. Execution of operations involved in Route Card as per the standards and Drawing. Vendor has to establish their own QASP for Special process soldering in line with QASP-22 and AFQMS Issue II 2018 requirement. f. Operations like stripping, crimping etc. mentioned in the route cards are to be carried out only by the trained technicians approved by HAL and Special Process like Soldering to be carried out by IPC or equivalent certified technicians as per AFQMS issue II 2018 requirements. g. Approval of Quality in charge / personnel by HAL QA in concurrence with ORDAQA /DGAQA before starting of inspection by Vendor QC and carrying out 100% Inspection of stages by HAL Approved vendor Quality personnel for Loom Assemblies as per Route Card and Drawings and final inspection stages in coordination with HAL QA/ORDAQA wherever applicable as per QAP for manufacturing of MK1A Looms. h. Vendor shall have QMS approvals such as IS09001:2000/AS9100 Rev D for their facilities. i. Vendor shall ensure a clean Lab environment (temperature and humidity control, illumination, dust-free and pest-controlled atmosphere). j. Potting compounds must be stored below the specified temperature of 80°F/26°C k. Use of shelf life expired items is prohibited and a designated place shall be identified for the storage of such items. l. Dedicated storage facilities for items supplied. m. Controlled environment for storage of items as defined in build documents. n. NABL accreditations for calibrations for measuring &testing equipment, soldering machine, Crimping Tools etc. only to be used for fabrication, testing and Inspection Loom assemblies. o. Loom Boards: For fabrication of Loom assemblies, all 21 Nos. of Loom Boards has to be cleared by HAL QC in concurrence with DGAQA. p. All project consumables including soldering materials will be supplied by Aircraft division only will be used for fabrication of loom assemblies. Essential
11 CHANGE: Any Design changes directed by HAL prior to the delivery date of a Product shall be implemented by Supplier prior to delivery of such Product to HAL in accordance with the mutually agreed delivery date specified in the respective purchase order. Essential
12 DELIVERY OF PRODUCTION OF LOOMS: Upon successful completion of all the FAI on a Production of looms, Supplier shall deliver the respective looms to HAL. Each Loom shall be packed separately with proper protection. The harnesses plugs shall be covered with plastic cover. Each Production shall bear a nameplate containing the Looms part number and Serial Number, and shall be accompanied by the following documentation: 1. Certification of Conformance (COC) 2. List of Non-Conformance Reports 3. All applicable test results Essential
The blank box highlighted in yellow colour shall be filled by the Vendor and uploaded the dully filled format with authorised seal and Signatory along with commercial quote Bid of the above E-Tender mandatorily.
DEFINITIONS & INTERPRETATIONS
HAL / COMPANY : Means Aircraft Division - HAL, who is interested to appoint a Supplier for the tendered service.
BIDDER / TENDERER : The firm / Agency who submits the bid / tender against this Invitation for Tender (IFT)
SUCCESSFUL BIDDER or TENDERER / Supplier / Vendor: The Bidder/Tenderer, whose bid/tender is accepted by HAL for award of Contract.
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION, BANGALORE COMPLEX POST BAG NO. 1788, VIMANAPURA POST, BANGALORE-560 017 INDIA Phone: +91 80 22321585, Fax +91 80 22315188 Web Site: www.hal-india.com
ANNEXURE-II COMMERCIAL TERMS AND CONDITIONS
Tender Ref No. A/OPEN TENDER/ESP/LCAMK1A-207/1/24 Dtd 03.09.2024 Tender Due Date: 23-09-2024
Scope of Supply OUTSOURCING OF PRODUCTION OF ELECTRICAL LOOM BOARD ASSEMBLIES FOR THE LCA MK1A PROGRAM. (ON PACKAGEWISE L1 OFFER BASIS)-(OPEN TENDER - TWO BID SYSTEM)
Name of the Tenderer / Bidder
Quotation Reference Number
Tenderer / Bidder Details
1 Name of the Tenderer / Bidder M/s.
2 Nature of Organization (Govt. / Public Limited Co. / Pvt. Limited Co. / Partnership / Proprietary)
3 Address of Registered Office
4 Address in Bangalore
5 Contact Person & Designation with Mobile No.
6 Telephone No.
9 Please confirm whether the bidder is Unregistered / Registered / Composition Scheme in GSTN
10 GSTIN No. (Copy to be Submitted)
11 PAN No. (Copy to be uploaded)
12 Whether the Bidder is MSE as per MSMED Act (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by SC/ST? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by Woman Entrepreneur? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Bidders who wants to avail privileges given to MSME vendors, should have UAN. Copy of the Udyog Aadhar certification shall be submitted to consider such privileges to MSMEs.
13 Pl. indicate whether the bidder is blacklisted or delisted. (Bidders who are blacklisted or delisted from any PSU / Govt. Departments will not be eligible to participate for bidding)
14 Whether the Bidder is a Registered Vendor with any of the HAL Divisions.
If 'Yes', please confirm the name of HAL Divisions where you have registered and provide the details such as Vendor Registration No. & Category and UPLOAD related documents to support your claim.
15 Pl. confirm the address to which PO to be placed in the event of acceptance of your tender after bid evaluation.
16 Bidder shall indicate their GeM (Government e Marketplace) Seller ID.
17 Please upload your Bank details in NEFT/RTGS/ECS format duly authorized by concerned Branch Manager of the Bank.
BANK DETAILS (Copy of cancelled cheque leaf to be Submitted) Bank Account No.
Name of the Bank
Type of Account
COMMERCIAL COMPLIANCE MATRIX
PLEASE INDICATE YOUR RESPONSE TO THE FOLLOWING TERMS AND UPLOAD AS A PART OF TECHNICAL BID. BIDDERS TO ENSURE NO PRICES ARE INDICATED IN THIS SHEET OR ANY WHERE IN THE TECHNICAL BID EVEN IN THE FORM OF PDF, IN CASE PRICES ARE ENTERED IN TECHNICAL BID, THE OFFER WILL BE SUMMARILY REJECTED. PRICES SHOULD BE ENTERED ONLY IN PRICE BID OF E PROCUREMENT WEB PORTAL.
Sl. No. Instructions Remarks Bidder Compliance
1.1 BID QUALIFYING CRITERIA (ESSENTIAL):
1.1.1 DETAILS OF CONSTITUTION OR LEGAL STATUS OF THE TENDERER: The Bidder should be a Company/Firm/Proprietorship having valid GSTN Registration and PAN in India. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.2 Bidder shall be an Indian Vendor or else their tender will be rejected. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.3 Bidder shall have Mandatorily CLASS III DSC from the authorised agency and got Registered with HAL E-portal to participate in the Open Tender. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.4 Bank Gaurantee,Indemity Bond, Insurance Policy: 1.Indemnity bond for Rs.18 Crs in favour of Aircraft Division, HAL covering the cost of material, which should be valid till completion of supplies +60 days. 2. Comprehensive Insurance policy covering potential risk to the HAL Aircraft Division supplied material including fire, theft, damages /loss of material etc. for an amount equal to estimated cost of material, which should be valid till completion of supplies+60days.such insurance policy will be assigned to Aircraft Div, HAL. 3.A BG for an amount, which depends on maximum value of materials held with subcontractor(Max.Rs.1 Lakh). Proforma for Bank Guarantee/Indemnity Bond /Insurance towards material supplied by HAL will be provided by us. Essential-To Note & Confirm
1.1.5 The Bidder shall sign the legal instruments like Omnibus Non-Disclosure Agreement (NDA) as per the HAL prescribed format (Refer Annexure - IV) against supply of drawings, process sheets, documents etc Including soft and hard copies by HAL for submission of competitive quote in the HAL E-Portal. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.6 Earnest Money Deposit (EMD): The bidder shall be required to deposit earnest money of Rs. 75,000/- (Rupees Seventy Five Thousand only) for Indian Bidders. The EMD shall be submitted in Demand Draft/Banker’s Cheque/Wire Transfer only in favour of Hindustan Aeronautics Limited, payable at Bangalore and enclosed in a cover with tender reference and due date super scribed, and should reach the following address or the requisite amount to be Wire Transferred before Tender Closing date & Time. Deputy General Manager [External Source Department], Hindustan Aeronautics Ltd., Aircraft Division, Bangalore Complex, Bangalore-560017.India Ph : 080-22322243/1519 For Wire transfer, please make use of the following bank details: ACCOUNT NAME: HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION ACCOUNT NO: 39187601793 IFSC CODE : SBIN0001114 BANK NAME : STATE BANK OF INDIA, HAL BRANCH However EMD is exempted for PSUs, Other entities in the Govt Sector, MSEs Exempted by Govt Policy and foreign vendors. Vendor has to submit relevant documents MSME, Udyog Aadhaar etc., for claiming exemption. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.6 Integrity Pact: IP is applicable only if quoted value exceeding Rs. 5 Crores (or such amount amended from time to time) i. Bidder shall submit duly signed Integrity Pact (Either Standalone IP (Format B1) or Omnibus IP (Format B2)) on or before Indent due date and time, strictly as per the format (without any material change/deviation) soft copy is enclosed with the RFQ Annexure V-B1 & V-B2. ii. Bidder can select either Standalone IP or Omnibus IP for signing with HAL. iii. Bids/offers without duly signed Integrity Pact (Either Standalone IP or Omnibus IP) will be summarily rejected and will not be considered for further evaluation. iv. Duly signed Integrity Pact (Either Standalone IP or Omnibus IP) with any material change/deviation (from HAL’s approved format) will not be considered. If you have already submitted omnibus IP against HAL’s previous indent then it is not required to submit fresh IP. However previous Indent reference number with complete details should be indicated. v. All pages to be initialled by Buyer and Bidder/Seller. To Note, Confirm & upload the relevant documentary evidence.
vi. Independent External Monitors (IEM's) has been appointed by the Central Vigilance Commission, a statutory body. Name and E-mail ID of IEM's at present is as below. Name: Shri Gangaram Aloria, (IEM) E-Mail ID: [email protected] Name: Shri Rajiv, (IEM) E-Mail ID: [email protected] vii. The bidder is required to submit his bids/offers and duly signed Integrity Pact (Either Standalone IP or Omnibus IP) directly to HAL at following address, and not to IEM. Deputy General Manager(Purchase) Hindustan Aeronautics Limited, (Aircraft Division) Post Bag 1788 Vimanapura Post BENGALURU 560 017 viii. The bidder may approach the nominated IEM only for Integrity Pact related issues. Bidders may seek all clarification on specific Tender/RFQ/NIT related queries on-line only from the Contact Person, within the specified period as mentioned in the Tender Notification.
1.1.7 Experience:
a Vendor shall provide performance feedback from any one of their customer with contact details to whom similar Capacity of PRODUCTION OF ELECTRICAL LOOM BOARD ASSEMBLIES which have been supplied in the last 5 years. For this condition, Exemption not applicable for Start ups & MSE vendors. Essential-To Note, Confirm & upload the relevant documentary evidence.
b HAL reserves the right to verify the information by the vendor. In case the information is found to be false/ incorrect, the offer shall be summarily rejected. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.8 Submission of BID (Techno Commercial) by any Unregistered Vendor of Aircraft Division, such Vendor will be assessed by the Technical Team during Technical Evaluation stage. Based on the outcome of the assessment report of the Technical Committee Vendor shall be Qualified/approved for opening of Commercial Bid. Noted & Confirmed
COMMERCIAL TERMS AND CONDITIONS
1.2.1 PRICE: The bidder is required to indicate prices in Indian Rupees against individual items. Price quoted should be on F.O.R. Destination basis, for delivery at Stores at Aircraft Division of HAL Bangalore 560017 inclusive of all charges including transit insurance as applicable. Noted & Confirmed
1.2.2 FIRM PRICES: Unless the RFP/RFQ states otherwise, prices quoted will be deemed as firm and fixed during firm and fixed during the validity of Order/Contract. Accordingly, subsequent claims for price increases or alteration of any of the terms of the Order / Contract shall not be raised unless HAL agrees to consider on merit. Noted & Confirmed
1.2.3 GST & OTHER TAXES : GST and / or other taxes as applicable should be distinctly shown alongwith the prices quoted also indicating HSN/SAC codes as applicable. GST, wherever liveable and intended to be claimed from HAL should be distinctly shown as “Extra” as provision given in the “Commercial Quote format” in case of E-procurement Tender and for Normal Tender shall be indicated as “Extra” in the Quotation. Where this is not done no claim for taxes will be admitted at a later stage on any ground whatsoever unless such claim arises due to a change in GST/ Tax Law/ Rules subsequent to submission of Bid. Noted & Confirmed
1.2.4 VALIDITY OF THE QUOTATION: Unless otherwise stated in the RFP/RFQ, Price quoted should remain valid for a minimum of 120 days from the closing date of Tender enquiry to account for processing of Bids and internal approval by HAL Noted & Confirmed
1.2.5 TENDER DUE DATE: The due date for submission of quote is as given in the Request for Quotation through E Procurement web portal. Please note that the due date for submission generally will not be extended. If extension is required, vendor has to provide request for extension 5 days before the due date, failing which extension will not be done. Noted & Confirmed
1.2.6 SUBMISSION OF TENDER: Bidders are requested to submit their proposals (Technical and Price bid) online at E Procurement web portal. Tenders submitted other than E Procurement web portal will not be considered and will be rejected (No Hard copies of Technical and Price bid should be submitted). HAL is not responsible for delays / problems faced if any with internet, etc. Hence you are requested to submit the bids on-line well before the tender due date and time. Noted & Confirmed
1.2.7 LATE TENDER: Bids received after the due date and time specified in the tender shall be rejected in competitive Tenders. This applies even if there might be genuine reasons for such non-submission/non receipt of of Bids within the date/time as per the RFP/RFQ. Noted & Confirmed
1.2.8 TENDER EVALUATION: i) Evaluation is based on package basis ( all lines from sl.no.1 to 21 together). ii) Bid with lowest price conforming to the specification will be considered for placement of order. iii) If two or more bidders quote the same price, HAL reserves the right to seek revised offer from the same bidders and placing order on revised L-1 offer. If same situation prevails then HAL reserve the right to place order on any of them. iv) In respect of two bid system, technical bid will be opened on the tender opening date. After technical evaluation, the Commercial bids of those bidders who are technically acceptable will be opened. Noted & Confirmed
1.2.9 INSPECTION: Loom Board Assemblies shall be inspected by HAL Aircraft Division’s Inspector (or by a Third Party Inspection agency chosen by HAL or by a Committee formed by HAL) at Vendor’s works or at HAL as decided by HAL. The outcome of the inspection (Accept/Reject/Rework) will be final and binding on the Vendor. The Vendor shall facilitate and support inspection if it is conducted at its premises based on advance intimation by HAL. Even though PDI or other stage inspections might be involved, the final inspection and acceptance will be at HAL Aircraft Division or applicable as per supplier scope of work Noted & Confirmed
1.2.10 ACKNOWLEDGEMENT : Once the Order is placed by HAL, within 7 calendar days, an acknowledgement of the same shall be sent to HAL to confirm Acceptance of the Order including Specification, Quantity, Price, Payment Terms, delivery schedule, etc. as indicated in the Order. If Acceptance as above is not given within 7 calendar days, it will be deemed to have been accepted. In order to avoid future disputes, vendors are encouraged to go through the Order and its Terms & Conditions carefully and intimate HAL if any of the contents are not in line with what was quoted and/or in line with what was negotiated and agreed with HAL. Noted & Confirmed
1.2.11 DAMAGE/LOSS TO MATERIAL/ASSETS: In the spirit of a Bailor-Bailee relationship in case material, tools, etc. are supplied by HAL, the Vendor shall take due care of these assets to prevent loss, damage, theft, pilferage, etc. due to man-made or natural causes. However, normal wear and tear of these assets while in usage will not be considered as damage for the above purpose. Vendor is strongly urged to procure Insurance Policy to cover the risk of loss/damage to materials and assets issued by HAL. Noted & Confirmed
1.2.12 REJECTION ALLOWANCE & RECOVERY: The maximum permissible rejection allowance will be 5% of the quantity on Order (or the final quantity deliverable as per any subsequent amendment, Short-Closure or Termination) or One (1) , whichever is higher. Raw material cost will be deducted on the basis of Detail Parts cost. This quantity will be converted into an equivalent allowable value. If the cumulative rejection in value terms is within the allowable value, HAL will supply additional material free of cost to the extent to cover the rejection. HAL Aircraft Division has the right to recover the cost of raw material as indicated in the above commercial quote format from the subcontractor .( Detail part basis as per PDO given by HAL Quality Inspector). All rejected materials will be returned to HAL, , Aircraft Division by the subcontractor at his own expense on F.O.R basis. Rejection of Kit of Parts is not permitted as KoP being supplied by HAL. Incase of rejections, landed cost of the component at HAL shall be recovered from the outstanding bills The Raw material cost indicated in the RFQ is tentative. The exact loaded material cost on rejection will be recovered at the point of payment as per the actual loaded material type and respective current material purchase price. Noted & Confirmed
1.2.13 QUALITY AND WORKMANSHIP: The Vendor shall ensure that the items/tools/components supplied by them shall be of the highest quality and workmanship and as per the drawings & specification provided by HAL. Wherever orders are placed in accordance with particular specification/drawing requirement, it will be deemed to be an undertaking by the Vendor that they have fully acquainted themselves with various drawings / specifications/standards thereof. Noted & Confirmed
1.2.14 WARRANTY The Items supplied shall be free from any defects/poor workmanship and shall be guaranteed for Quality/ satisfactory performance for a period of 12 months from date of final acceptance by HAL. Any defect or deviations or shortfall against the Technical Specifications of the item Warranty period shall be rectified by the Vendor at its own cost. HAL at its option may insist on the vendor furnishing a Performance Bank Guarantee (PBG) for 10% of the value of the Order to cover HAL’s risks during the Warranty period. Such PBG in HAL’s format should be valid till 60 days after the last item is delivered. Post the Warranty period or post the expiry of the PBG as applicable, any rework or rectification to address defects noticed should be undertaken by the vendor on mutually agreed terms. Noted & Confirmed
1.2.15 Delivery : The vendor need to demonstrate that required tools and equipments to produce looms board assemblies within 02 months of issue of confirmed Purchase order. First Article Inspection (FAI) for 21 Nos. Looms assembly of 1st Aircraft: FAIR shall be done in accordance with AS9102. FAI done by the firm shall be inspected, verified and clearance to be taken from M/s HAL- QA in concurrence with DGAQA before undertaking batch production. T0= Date of PO/Loom kits/ Raw Material/any technical inputs from HAL whichever is latest. 01 set = 01 no qty of each 21 assemblies. FAI : T0+12 Weeks - 01 set = 01 No FAI each for all 21 assemblies Batch1: T0+24 Weeks- 02 sets = 02 Nos each for all 21 assemblies Batch2: T0+36 Weeks- 02 sets = 02 Nos each for all 21 assemblies Batch3: T0+48 Weeks- 02 sets = 02 Nos each for all 21 assemblies Batch4: T0+56 Weeks- 03 sets = 03 Nos each for all 21 assemblies In case FAI and batch supplied together, then the LD will be calculated considering Batch Quantity delivery Schedule lead time from date of Raw material loading as per PO delivery terms of the Batch quantity.. (Note: The delay attributable to HAL in giving the clearance of Stage Inspection at Vendor place by QC HAL, Aircraft Division wherever as applicable will be waived off, to that extent Vendor has to produce evident Proof of Written (or) documentary evidence for relaxation of such claims applicable for FAI and Batch Quantity). In the event of an order HAL reserves the right to a) To recover Liquidated Damages (LD) at the rate of 0.5% of the value of the item(s)delivered late for each week of delay subject to a maximum of 5 % of the value of the item(s) delayed. LD = V×[D/7]×0.5% or 5% of V, whichever is less, where V is the value of item(s) delayed and D is the number of days of delay. b) Claim reimbursement under the Risk Purchase clause c) To Short-Close/Terminate the Order Noted & Confirmed
1.12.16 TECHNICAL ASSISTANCE: Vendor shall take responsibility for successful integration, proving and qualification of the product to the satisfaction of the certification authorities. For this purpose vendor undertakes to send to HAL (without any cost to HAL) technical personal required by HAL / certification authorities. Noted & Confirmed
1.12.17 PACKING: Each items will be suitably packed in order to withstand transport hazards and also during storage period. Batch number and date of manufacture should be labelled on each part. Noted & Confirmed
1.12.18 HAL reserves the right to carryout on-site visits/audits and shall have unhindered access to shop floor, stores, bonded area and also at his sub vendors, if any. Project Review Meetings (PRM) will be conducted at regular intervals. Noted & Confirmed
1.2.19 EXTENSION OF TIME: If an extension of delivery schedule is desired, the vendor shall apply in writing to HAL citing valid reasons for extension, preferably at least 15 days prior to the scheduled date of delivery of the next item/batch as applicable. If HAL at its sole discretion agrees to the request, a mutually agreed revised schedule will be made and documented. If no request for extension of schedule is made as above, no later request for waiver of LD, etc. will be entertained by HAL. Noted & Confirmed
1.2.20 REPEAT ORDER: The additional Quantity up to 100% or less can be placed as repeat order within a period of 12 months from the last PO supply at the same initial PO unit cost. Noted & Confirmed
1.2.21 Vendor will be responsible for collection of kits from HAL with proper identification, packing and transportation in coordination with HAL. Vendor to check the kits with planning schedule and confirm the items before packing. Vendor is also required to supply finished items to HAL Aircraft Division , HAL, Bangalore Noted & Confirmed
1.2.22 PAYMENT TERMS: RC: 100 % Payment on acceptance of Electrical Loom Board Assemblies by HAL Quality Inspector at HAL Aircraft Division, B'lore. To facilitate the Vendor's Payment, it is requested to furnish the required bank details to make payments through RTGS. NRC: All the NRC items shall be returned in good condition along with on completion and acceptance of last batch of each Items order quantity. 100% Payment will be made on supply and acceptance of NRC Items by HAL Quality Inspector after completion and acceptance of respective Electrical Loom board Assemblies order quantity. NRC (Non Recurring Cost/Development cost) cost specifically developed for Loom Board Assemblies as indicated in the Commercial quote format as provision is made in the additional notes highlighted in yellow colours. Vendors have to indicate the NRC cost specifying the Tender Sl No and respective Part Number along with applicable Taxes and Duties. The NRC Taxes shall be Explicitly indicated in percentage. In case if the Vendor has not indicated the applicable NRC Taxes or not given any qualification for applicability of taxes, such quotes shall be considered as "Inclusive of all Taxes and Duties". The NRC Cost quoted shall include the specific Jig/Fixture/Gauges etc., Part Number for Identification/Accounting and regularization of payment. The NRC cost quoted by the vendor and Paid by HAL shall become the property of HAL. Such NRC Items (Jigs/Fixtures/Gauges etc.,) shall be returned to HAL Aircraft Division on completion and acceptance of last batch quantity of the respective Item of the PO in a good condition duly certified by HAL QC, Aircraft Division, B'lore and 100% payment will be made only on receipt of NRC Item at HAL and acceptance of HAL QC. HAL reserves the right to place the repeat order for future requirement at the unit price quoted excluding NRC/Development cost applicable for only Proved Parts. Noted & Confirmed
1.2.23 APPROPRIATION : Whenever under this Order/contract any sum of money is recoverable from the Vendor, HAL shall be entitled to recover such sum by the following means sequentially until the entire claim is covered. a) Deduction from payables under the present Order b) Deduction from payables under any other Order placed by the HAL Division that placed the present Order c) Deduction from payable under any Order placed by any other Division of HAL If the entire claim cannot be covered by the above, the vendor shall make a direct payment to HAL through Bank transfer for the balance amount. If this not done, then HAL will invoke the Indemnity Bond for recovery through legal process. Notwithstanding the remedies available as above, HAL reserves the right to come to a negotiated settlement With the vendor in case the circumstances so warrant. Noted & Confirmed
1.2.24 Vendor shall establish and maintain a proper system at their premises for monitoring and managing the Inventory and Production including Part Rejection Order ( PRO ) and Tagging. Noted & Confirmed
1.2.25 RISK PURCHASE: 23. In case the vendor fails to deliver items as per the specifications, scope, quality or schedules as per the Order, the vendor shall compensate HAL for the additional costs incurred by HAL in arranging for the supplies which are in default. Prior to invoking this clause, HAL will issue a Notice stating its intention to go ahead with alternative arrangements and the obligations of the vendor. In case a resolution to the issue is not proposed by the vendor within 15 days or if that proposal is unacceptable, HAL will initiate action to Short-Close or Terminate the Order and go ahead with making alternative arrangements including prospecting other vendors. In this case, the vendor shall be liable to pay HAL the difference between the price at which such alternate arrangement will be made and the price as per the Order/Contract with the vendor for the items undelivered or delivered with non-compliances. This is in addition to other claims and remedies available to HAL including the imposition of Liquidated Damages. Noted & Confirmed
1.2.26 SUB-CONTRACTING: The Vendor shall not sub-contract the scope of work under the Order in whole (or to an extent large enough) to any other party in such a manner as to make itself equivalent to an agency or intermediary. In case more than 25% of the scope of work (SOW) in terms of value is proposed to be sub- contracted to a single third party, prior written consent of HAL shall be taken. If the vendor will subcontract any portion of the SOW to a third party and the value of such subcontracting will be Rs. 2 (Two) crores or more, the vendor should be ready to sign a tripartite Integrity Pact (HAL, vendor and the sub-contractor) if so demanded by HAL and in a format specified by HAL. Noted & Confirmed
1.2.27 INDIAN MICRO & SMALL ENTERPRISES (MSES): As per the directives of Govt. of India, Ministry of Micro, Small and Medium Enterprises amendments to Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 vide order No. 21(22)-2018-MA dtd 9th Nov 2018. L1 vendor is Non-MSE & tendering quantity is dividable: If one or more MSE Vendors fall within the price band of L1+15% and agree for L1 price the supply of 25% of tendered quantity (rounded to lesser integer) will be shared among MSE’s L1 Vendor is Non-MSE & tendering quantity is undividable: If MSE vendor quoting price falls with in the price band of L1+15% and agrees for L1 price the full tendered quantity will be awarded to MSE vendor. L1 vendor is MSE full tendered quantity shall be awarded. The vendor must certify whether they belong to Micro and Small Enterprises (MSEs), if so they should enclose the relevant supporting documents specified by Ministry of MSME and also indicate whether the enterprise is owned by the Scheduled Caste or the Scheduled Tribe entrepreneurs. In absence of these information & supporting documents, the vendor will not be considered under MSEs. Noted & Confirmed
1.2.28 WAIVER OR TRANSFER OF THE CONTRACT : The supplier shall not waive the contact or transfer it to third parties, whether in part or in whole, nor waive any interest that is included in the contract without prior written permission of the company. Noted & Confirmed
1.2.29 MODIFICATION: Any Modification of or addition to the contract shall not be binding unless made in writing and agreed by both the parties. Any minor changes in nomenclature including changes in drawing number, part number, Higher Issues, change in dimensions or change in material specification or etc against above RFQ Parts does not entail an increase in unit SMH by more than 5% vendor should absorb the changes voluntarily with out additional cost / claim for the applicable Order Quantity for the material supplied by HAL. Noted & Confirmed
1.2.30 MATERIAL CHANGE IN INFORMATION: Vendor shall always inform any material changes in the information already declared/furnished by them at the time of registration or afterwards, within 30 days of such material change in information. Non-compliance in this regard may result in de-registration of the Vendor. In the case of serious breaches, the Order is liable to be terminated at HAL’s discretion. Noted & Confirmed
1.2.31 CONFIDENTIALITY : Vendor is given the drawings/ process sheets and other documentation for manufacture of the components required by HAL Aircraft Division. The documents issued to Vendor are strictly confidential. Vendor should keep them in safe custody. The information contained in the documents should not be divulged to any other person(s) or entities. Vendor is solely responsible to prevent any loss of these documents. No extra copies of the documents should be made other than for essential and legitimate purposes, in any case ensuring confidentiality. Any violation by Vendor of these instructions will make Vendor liable for penal action under section 3 and 5 of the Official Secrets Act, 1923. HAL may insist on signing of a Non-Disclosure Agreement in this regard. The drawings shall be the property of HAL and shall not be used for any purpose other than the purpose intended under the Order/Contract. Where technical inputs/assistance is provided to the Vendors by HAL to facilitate work, such inputs shall also be treated as confidential information and safeguarded accordingly. Vendor shall not directly deal with HAL’s customers for the items deliverable to HAL under this Order unless expressly instructed to do so by HAL. Noted & Confirmed
1.2.32 PARALLEL ORDER/CONTRACT: Nothing in this Order/ contract precludes HAL from entering now or hereinafter into any Order/contract with others for manufacturing and supply of same or similar goods. Noted & Confirmed
1.2.33 TERMINATION OF CONTRACT: In the event of HAL Aircraft Division not being satisfied with the performance of the Vendor for any reason including breach of contract, or for HAL’s own convenience, HAL Aircraft Division shall be entitled to terminate the Order/contract, after giving 30 days’ notice in writing to the Vendor by registered post. In case of a termination for convenience of HAL, the compensation payable to the vendor shall be worked out on a fair and equitable basis and then agreed mutually through negotiation. In case the termination is warranted for reasons entirely attributable to the vendor, no compensation shall be payable, but HAL shall be entitled to claim remedies as available under the present Order. Further, upon termination, the Vendor shall ensure the following at its own expense and within 30 days after the termination is formally completed. a) All the materials supplied by HAL, except what is allocable on a pro rata basis to the deliveries completed before the date of receipt of the Notice of Termination, to be returned to HAL. This shall include unused raw materials, semi-finished items and finished items ready to be delivered. b) All the other assets (Tools, Jigs, Fixtures, Inspection equipment, etc.) supplied by HAL or fabricated by the vendor using HAL funds to be returned to HAL c) All the documents (in soft and hard copies) supplied by HAL to be returned to HAL d) All spare copies of documents, soft copies in vendor IT system to be permanently erased/destroyed. e) For enabling HAL to make alternative arrangements for supply of the items, the vendor shall transfer drawings, documents, process sheets, methodology, etc. to HAL including IP rights (if involved) for use by HAL. In case the termination is for HAL’s convenience, the parties will negotiate the terms of such transfer. f) In case the vendor has sub-contracted a portion of its scope of work, all of the above stipulations to be understood to include the materials, documents, etc. issued to/available with the sub-contractors of the vendor also. Noted & Confirmed
1.2.34 ARBITRATION: All disputes related to this Order shall at first instance be resolved through friendly negotiations. If the dispute cannot be resolved thus, the matter shall be referred to Arbitration as follows. (a) FOR VENDORS OTHER THAN GOVERNMENT ENTITIES AND MSMES All disputes or differences whatsoever arising between the parties out of or relating to the construction, meaning and operation or effect of this Contract or the breach thereof shall be settled by Arbitration in accordance with the Rules of Arbitration of the Indian Council of Arbitration (ICA) and the award made in pursuance thereof shall be binding between the parties. (b) FOR A VENDOR WHO IS A GOVERNMENT ENTITY In the event of any dispute or difference relating to the interpretation and application of the provisions of commercial contract(s) between Central Public Sector Enterprises (CPSEs)/ Port Trusts inter se and also between CPSEs and Government Departments/Organizations (excluding disputes concerning Railways, Income Tax, Customs & Excise Departments), such dispute or difference shall be taken up by either party for its resolution through AMRCD (Administrative Mechanism for Resolution of CPSE’s Disputes) as mentioned in DPE OM No.05/0003/2019-FTS-10937 dated 14/12/2022 as amended and the decision of AMRCD on the said dispute will be binding on both the parties. (c) APPLICABLE ONLY FOR MSME VENDOR The Micro, Small and Medium Enterprises Development (MSMED) Act, 2006 provides parties to a dispute (where one of the parties is a Micro or Small Enterprise) to be referred to Micro and Small Enterprises Facilitation Council if the dispute is regarding any amount due under Section 17 of the MSMED Act, 2006. If a Micro or Small Enterprise, being a party to dispute, refers to the provisions in MSMED Act 2006, these provisions shall prevail over the Indian Arbitration and Conciliation Act, 1996 which is in force from time to time. Noted & Confirmed
1.2.35 WORK AND PAYMENT DURING ARBITRATION Work under the contract and related activities including payments can, if reasonably possible, continue by mutual agreement during the arbitration proceedings. Noted & Confirmed
1.2.36 JURISDICTION: The Court at Bangalore, Karnataka only shall have jurisdiction to deal with and to decide any legal matter whatsoever arising out of this contract. This contract shall be governed by and subject to and interpreted and construed in accordance with the Laws of Republic of India, which are in force from time to time. Nothing in this contract shall entitle the Parties to this contract to exercise the rights, privilege and powers conferred under this contract in any manner which will contravene the Laws of India. Noted & Confirmed
1.2.37 FALL CLAUSE: During the validity of the present Order, the vendor shall not sell or offer to sell the items deliverable under this Order to any other buyer at prices lower than those agreed in this Order. In case it comes to the notice of HAL that this condition is breached, HAL, if it so chooses, will notify the vendor accordingly and seek the benefit of such lower prices which shall be passed on to HAL without demur. Such benefit will arise from the date on which sales at the lower prices is made/ offered by the vendor to any other buyer. Noted & Confirmed
1.2.38 EXPORT LICENSE: Foreign Vendors making proposals should ensure availability of export license as per their Govt. Regulations for export to India. Vendor shall be required to obtain and maintain all Export/Import licenses and permits etc., as the case may be, required for performing supplies/ services against this tender. Obtaining export license shall be entire responsibility of the Vendor. The Vendor shall ensure that HAL has unrestricted rights to export its products incorporating the item supplied by the vendor to any county. Noted & Confirmed
1.2.39 AGENTS/AGENCY COMMISSION: The vendor confirms and declares that the vendor has not engaged any individual or firm, whether Indian or Foreign whatsoever, to intercede, facilitate or in any way to recommend to HAL or any of its functionaries, whether officially or unofficially, to the award of the contract/ order to the vendor; nor has any amount been paid, promised or intended to be paid to any such individual or firm in respect of any such intercession, facilitation or recommendation. The Vendor agrees that if it is established at any time to the satisfaction of HAL that the present declaration is in any way incorrect or if at a later stage it is discovered by HAL that the vendor has engaged any such individual/firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before or after the signing of the contract/ purchase order, the vendor will be liable to refund that amount to HAL. The vendor will also be debarred from participating in any RFQ/Tender for new projects/ program with HAL for a minimum period of five years. HAL will also have a right to consider cancellation of the contract/ order either wholly or in part, without any entitlement or compensation to the vendor who shall in such event be liable to refund to HAL, all payments made by HAL in terms of contract/ order along with interest at the rate of 2% per annum above SOFR (Secured Overnight Financing Rate) (for foreign vendors) and MCLR of State Bank of India plus 2% (for Indian vendors) as on the date of payment. HAL will also have the right to recover any such amount from any contracts/ order concluded earlier with HAL. Noted & Confirmed
1.2.40 IMMUNITY TO THE GOVERNMENT OF INDIA : It is expressly understood and agreed by and between Vendor & HAL that HAL is entering into this contact solely on its own behalf and not on behalf any other person or entity. In particular, it is expressly understood and agreed that Government of India is not a party to this contract and has no liabilities, obligations or right hereunder. It is expressly understood and agreed that HAL is an independent legal entity with power and authority to enter into contracts solely on its own behalf under the applicable laws of India and general principles contract law. Vendor expressly agrees, acknowledges and understands that HAL is not an agent, representative or delegate to the Government of India. It is further agreed and understood that Government of India is not and shall not be liable for any acts, omissions, commissions, breaches or other wrongs arising out of the contract. Accordingly, Vendor hereby expressly waives, releases and foregoes any and all actions, including counterclaims, impleader claims or counter claims against the Government of India arising out of this contract and covenants as to any manner, claim cause or action whatsoever arising out of or under this contract. Noted & Confirmed
1.2.41 INTELLECTUAL PROPERTY (IP) RIGHTS, ETC.: a) Vendor agrees that HAL shall be the sole owner of all Intellectual Property (IP) generated in the performance of this Contract by or on behalf of the Vendor with the aid of either funding and/or technical inputs from HAL (hereinafter referred to as ‘Foreground IP’). To the extent that Vendor’s sub-contractors perform any part of the Contract, the Vendor shall ensure that any Foreground IP arising from such work shall be assigned to HAL. Vendor shall share with HAL all documentation necessary for HAL to exercise its rights to Foreground IP. If required by HAL, Vendor shall assist HAL in registering the Foreground IP in favour of HAL. b) Vendor grants to HAL an irrevocable, non-exclusive, world-wide, royalty-free license to sell, offer for sale, use, and distribute HAL Products incorporating the item(s) supplied by the vendor under this Order which item(s) may contain Background IP of the vendor. Background IP shall mean and include all pre-existing inventions and IP necessary for HAL to exercise its rights to Foreground IP. c) Vendor shall indemnify and protect, at its own cost, HAL in respect of cost/claims/liabilities (including attorney’s fees and associated costs of legal proceedings) arising from any violation of Intellectual Property Rights of any third party with respect to Supplies/Services provided by the vendor. If HAL or HAL’s customer/s are unable to put to use the Supplies/Services or a portion thereof as a result of violation of the Intellectual Property of any third party, the vendor shall within reasonable time at vendor’s own cost either, (i) Procure for HAL and HAL’s Customer/s the right to continue using the Supply/Service or, (ii) Replace or modify the Supplies/Services so that it becomes non-infringing or, (iii) Compensate HAL for the damages suffered by HAL arising due to inability to put to use the supplies/ services or a portion thereof. d) In case the supplier receives a requirement/ request for supply or repair of deliverables of this contract directly from any third party including HAL’s customers, such request shall be forwarded to HAL. Intellectual Property for the purpose of this clause includes inventions, discoveries and improvements; know-how, works of authorship, technical data, drawings, specifications, process information, reports and documented information; and computer software (including without limitation, source code, object code, source code listings and object code listings that would enable the software to be reproduced or recreated), topology of integrated circuits, databases or any other such results of intellectual activity. Noted & Confirmed
1.2.42 INVOLVEMENT OF ANY AGENTS AND MIDDLEMEN: No involvement of Agents or Middlemen in India or abroad in any capacity whatsoever is permitted at any stage in relation with this tender and the resultant contract. Subcontractor shall confirm that he has not appointed any agent in India to promote this contract and that no commission etc. is payable to any such agent in connection with this contract. Subcontractor shall also confirm that he has neither paid nor will pay any commission, fee or any such charges to any agent in connection with the award and execution of this contract. Should it be subsequently proved that such a commission, fees or charge has been paid, contrary to the foregoing, buyer shall be entitled to terminate this contract forthwith. The buyer shall also be entitled to recover from the seller an amount equal to the commission, fees or any such charge proved to have been paid. HAL has not appointed / authorized any person / agent to deal with the subcontractors in respect of the said contract. In case, if someone claims and interacts with the subcontractors it shall be duty of the subcontractors to bring such instances to the notice of HAL Management. It is expressly understood and agreed by and between Sub Contractor & purchaser that purchaser is entering into this contact solely on its own behalf and not on behalf any other person or entity. In particular, it is expressly understood and agreed that Government of India is not a party to this contract and has no liabilities, obligations or right hereunder. It is expressly understood and agreed that purchaser is an independent legal entity with power and authority to enter into contracts solely on its own behalf under the applicable laws of India and general principles contract law. Sub Contractor expressly agreed acknowledges and understand that purchaser is not an agent, representative or delegate to the Government of India. It is further agreed and understood that Government of India is not and shall not be liable for any acts, omissions, commissions, breaches or other wrongs arising out of the contract. Accordingly, sub-contractor hereby expressly waives releases and foregoes any and all actions, including counterclaims, impleader claims or counter claims against the Government of India arising out of this contract and covenants as to any manner, claim cause or action or this whatsoever arising out of or under this contract. Noted & Confirmed
1.2.43 EXIT CLAUSE: Exit criteria: The contract/order may be terminated under the following circumstances: i) In the event of unsatisfactory performance by the vendor during the contract period, or any of the information provided by the vendor is found to be untrue, or vendor is found to have attempted to influence any person involved with the contract through unethical means, the contract shall be terminated with 03 month’s advance notice without any financial implication to HAL. Notwithstanding the foregoing, in cases where it is found that a vendor is engaged in unethical practices, they shall be barred from participating in the future contracts for a period of 02 years. ii) If there is change in HAL requirement, contract shall be terminated with 01 months advance notice. The liability of HAL in this case will be agreed mutually. In the event of termination of contract by either party the vendor shall ensure the following: a) IPR’s are transferred to HAL to enable HAL to proceed on the work with other Vendor. Vendor also will render all assistance till the other vendor fully take over the balance work. b) Transfer title and deliver all or any part thereof of the supplies, materials, work-in-progress, finished Products, Tooling, drawings and data produced or acquired by vendor specifically for the Product being terminated. c) Supply of products and its components / spares at least for a period of 05 years from the date of such termination. d) The vendor is declared bankrupt or becomes insolvent. e) The delivery of material is delayed due to causes of Force Majeure by more than (03 months). f ) Based on the decision of the Arbitration Tribunal. Noted & Confirmed
1.2.44 FORCE MAJEURE: Neither party will be liable to the other for any act done or prevented from so doing by virtue of the occurrence of force majeure conditions such as war, general mobilization of troops, strikes, lockouts in factories, fire, earthquakes and floods, embargoes or stoppage of deliveries by Government. Noted & Confirmed
1.2.45 A designated coordinating officer should be nominated by Vendor who will be single point of contact for coordinating the project with HAL. Please indicate following: Contact person name Postal address, email ID for future correspondence / clarifications and also provide email and phone no of CEO/MD/GM/Proprietor Noted & Confirmed
The blank box highlighted in yellow colour shall be filled by the Vendor and uploaded the dully filled format with authorised seal and Signatory along with commercial quote Bid of the above E-Tender mandatorily.
DEFINITIONS & INTERPRETATIONS
HAL / COMPANY : Means Aircraft Division - HAL, who is interested to appoint a Supplier for the tendered service.
BIDDER / TENDERER : The firm / Agency who submits the bid / tender against this Invitation for Tender (IFT)
SUCCESSFUL BIDDER or TENDERER / Supplier / Vendor: The Bidder/Tenderer, whose bid/tender is accepted by HAL for award of Contract.
PRICE BID SHOULD BE SUBMITTED THROUGH E-PROCUREMENT
HINDUSTAN AERONAUTICS LTD.,
AIRCRAFT DIVISION
PRICE BID / COMMERCIAL QUOTE FORMAT
TELEPHONE: 080 - 22322243/22321519 HAL GSTIN : 29AAACH3641R1Z3
NATURE OF WORK: OUTSOURCING OF PRODUCTION OF ELECTRICAL LOOM BOARD ASSEMBLIES FOR THE LCA MK1A PROGRAM (ON PACKAGEWISE L1 OFFER BASIS) (OPEN TENDER -Two Bid System)
TENDER REFERENCE NO: A/OPEN TENDER/ESP/LCAMK1A-207/1/24 Dtd 03.09.2024 Tender Due Date: 23-09-2024
VENDOR NAME : VENDOR ADDRESS :
VENDOR QUOTE REF: QUOTATION DATE:
VENDOR GSTIN: UDYAM REGISTRATION NO:
TYPE OF ENTERPRISE MEDIUM/ MICRO/SMALL WOMEN ENTER PRISES (YES/NO)
OWNER OF THE ENTERPRISE BELONGS TO SC /ST OR OTHERS GEM SELLER ID
TReDS REGISTRATION NO: SAC NO FOR SERVICE RENDERED
CONTACT PERSON & PHONE NO: E-MAIL ID
Sl No. Part No Description Part Make Raw Material Cost per Part (Approximately in Rs.) Operation Nos. Qty Vendor quote Total Cost
Total Taxable Value (A) 0
Add : Statutory Taxes & Duties (i.e., GST wherever as Applicable)
CGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( B ) 0.00% 0
SGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( C ) 0.00% 0
IGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( D ) 0.00% 0
GRAND TOTAL - ( Sum of A+B+C+D) 0
Validity of Quotes
Delivery Lead Time & Liquidated Damages
Terms and Conditions Annexure-I & II, Scope of Work & Commercial bid notes (Acceptable / Not acceptable)
1. Your Quote is Subject to the following Terms & Conditions: i) The scope of work involves the production of 21 Loom Board Assemblies which will be manufactured and tested in the conformance with applicable documents mentioned in the Supplier scope of work. All project materials used in the manufacture of the cable assemblies like cables, sleeves, labels, connectors, back shells, switches, lacing cord, tie-wraps, brackets, etc will be supplied by HAL. ii) Non Project Consumables like cotton thread, masking tape, cleaning agent, acetone etc to be borne by the supplier. iii). Hand tools like wire strippers/blades (for light weight cables and conventional cables), crimping pliers, locators, dies, banding tools, nippers, knives/hot knives/hot tweezers, scissors, industrial multimeters, IR/Megger meters, hot air guns, soldering stations, power supplies etc and equipments like computer, laser printer etc to be borne by the supplier. The list of tools/specification details shall be provided by HAL.
2) The Raw Material will be supplied by HAL and Vendor has to make their own arrangement to collect the Raw material & deliver the Finished Assembly to HAL-Aircraft Division (External Source Department) B'lore. Required item will be manufactured from the material as per the specification and grade indicated in the drawings enclosed.
3) Bidders as requested to submit their proposals (Technical & Commercial Bids) online @ HAL e procurement web portal. The Vendor has to Upload the duly filled and authorised signed copy of TECHNICAL BID (ANNEXURE-I) and COMMERCIAL TERMS AND CONDITIONS COMPLIANCE (ANNEXURE II) along with Price Bid/ commercial Quote Bid of the above E-Tender Mandatorily for Evaluation of offer Technically by TEC. The blank box highlighted in yellow colour of the Annexure I & Annexure II and price bid shall be filled by the Vendor. Any Vendor quote technically Dis-Qualified by TEC such Price Bid will not be opened.
4) HAL reserved the Right to place order on Packagewise L1 Offer basis considering all RFQ 21 items. In case, any vendor quote partially or not quoted for all the 21 items such quotes are liable for Dis-Qualification.
5) Bank Gaurantee,Indemity Bond, Insurance Policy: 1.Indemnity bond for Rs.18 Crs in favour of Aircraft Division, HAL covering the cost of material, which should be valid till completion of supplies +60 days. 2. Comprehensive Insurance policy covering potential risk to the HAL Aircraft Division supplied material including fire, theft, damages /loss of material etc. for an amount equal to estimated cost of material, which should be valid till completion of supplies+60days.such insurance policy will be assigned to Aircraft Div, HAL. 3.A BG for an amount, which depends on maximum value of materials held with subcontractor(Max.Rs.1 Lakh). Proforma for Bank Guarantee/Indemnity Bond /Insurance towards material supplied by HAL will be provided by us for sucessful L1 vendor.
6) Delivery : The vendor need to demonstrate that required tools and equipments to produce looms board assemblies within 02 months of issue of confirmed Purchase order. First Article Inspection (FAI) for 21 Nos. Looms assembly of 1st Aircraft: FAIR shall be done in accordance with AS9102. FAI done by the firm shall be inspected, verified and clearance to be taken from M/s HAL- QA in concurrence with DGAQA before undertaking batch production. T0= Date of PO/Loom kits/ Raw Material/any technical inputs from HAL whichever is latest. 01 set = 01 no qty of each 21 assemblies. FAI : T0+12 Weeks - 01 set = 01 No FAI each for all 21 assemblies Batch1: T0+24 Weeks- 02 sets = 02 Nos each for all 21 assemblies Batch2: T0+36 Weeks- 02 sets = 02 Nos each for all 21 assemblies Batch3: T0+48 Weeks- 02 sets = 02 Nos each for all 21 assemblies Batch4: T0+56 Weeks- 03 sets = 03 Nos each for all 21 assemblies In case FAI and batch supplied together, then the LD will be calculated considering Batch Quantity delivery Schedule lead time from date of Raw material loading as per PO delivery terms of the Batch quantity.. (Note: The delay attributable to HAL in giving the clearance of Stage Inspection at Vendor place by QC HAL, Aircraft Division wherever as applicable will be waived off, to that extent Vendor has to produce evident Proof of Written (or) documentary evidence for relaxation of such claims applicable for FAI and Batch Quantity).
7) Payment Terms: RC: 100 % Payment on acceptance of Electrical Loom Board Assemblies by HAL Quality Inspector at HAL Aircraft Division, B'lore. To facilitate the Vendor's Payment, it is requested to furnish the required bank details to make payments through RTGS. NRC: All the NRC items shall be returned in good condition along with on completion and acceptance of last batch of each Items order quantity. 100% Payment will be made on supply and acceptance of NRC Items by HAL Quality Inspector after completion and acceptance of respective Electrical Loom board Assemblies order quantity. NRC (Non Recurring Cost/Development cost) cost specifically developed for Loom Board Assemblies as indicated in the Commercial quote format as provision is made in the additional notes highlighted in yellow colours. Vendors have to indicate the NRC cost specifying the Tender Sl No and respective Part Number along with applicable Taxes and Duties. The NRC Taxes shall be Explicitly indicated in percentage. In case if the Vendor has not indicated the applicable NRC Taxes or not given any qualification for applicability of taxes, such quotes shall be considered as "Inclusive of all Taxes and Duties". The NRC Cost quoted shall include the specific Jig/Fixture/Gauges etc., Part Number for Identification/Accounting and regularization of payment. The NRC cost quoted by the vendor and Paid by HAL shall become the property of HAL. Such NRC Items (Jigs/Fixtures/Gauges etc.,) shall be returned to HAL Aircraft Division on completion and acceptance of last batch quantity of the respective Item of the PO in a good condition duly certified by HAL QC, Aircraft Division, B'lore and 100% payment will be made only on receipt of NRC Item at HAL and acceptance of HAL QC. HAL reserves the right to place the repeat order for future requirement at the unit price quoted excluding NRC/Development cost applicable for only Proved Parts.
8) The maximum permissible rejection allowance will be 5% of the quantity on Order (or the final quantity deliverable as per any subsequent amendment, Short-Closure or Termination) or One (1) , whichever is higher. Raw material cost will be deducted on the basis of Detail Parts cost. This quantity will be converted into an equivalent allowable value. If the cumulative rejection in value terms is within the allowable value, HAL will supply additional material free of cost to the extent to cover the rejection. HAL Aircraft Division has the right to recover the cost of raw material as indicated in the above commercial quote format from the subcontractor .( Detail part basis as per PDO given by HAL Quality Inspector). All rejected materials will be returned to HAL, , Aircraft Division by the subcontractor at his own expense on F.O.R basis. The Raw material cost indicated in the RFQ is tentative. The exact loaded material cost on rejection will be recovered at the point of payment as per the actual loaded material type and respective current material purchase price.
9) Any minor changes in nomenclature including changes in drawing number, part number, Higher Issues, change in dimensions or change in material specification or etc against above RFQ Parts does not entail an increase in unit SMH by more than 5% vendor should absorb the changes voluntarily with out additional cost / claim for the applicable Order Quantity for the material supplied by HAL.
10) The Statutory taxes as applicable (i.e,G S T) at the time of delivery to be indicated Explicitly in percentage as provision given in the above commercial quote format coloured with Yellow. In case if the Vendor has not indicated the Tax line structure in % or left blank or not given any qualification for applicability of taxes as provision given in the additional notes below, such quotes shall be considered as "Inclusive of all Taxes and Duties" and vendor will not be eligible to make any claim in this regard at a later stage.
11) The RFQ quantity indicated is tentative, which may Increase/Decrease from time to time based on our LCAMK1A production Programme The Vendor shall submit the competitive offer considering the 5 Years anticipated requirement in addition to the above RFQ Quantity. The quotes of the Vendor shall be firm and fixed valid for 5 years period for the future additional quantiles after successful proving and supply of initial order as establish source.
12) Identical Prices: In case Two or more bidder quotes the same price HAL reserves the right to seek revised offer from the same bidders or resolve the tie through a real-time reverse auction process and placing the order on the revised L1 offer. In case if the same situation prevails again then HAL reserve the right to place order on any one of them. When counter terms and conditions have been offered by a bidder HAL shall not be deemed to be governed by such terms and condition unless specific written acceptance there of has been given by HAL.
13) The offer is valid unless otherwise specified in the quote should remain valid for our acceptance for a minimum of 120 Days from the closing date of Tender.
14) Post Tender Correction: If the bidder request for any post Tender correction after opening of the Tender, such Tender is liable for Rejection or Disqualification.
15) The Net price quoted by the Vendor should be after taking in to consideration realizable value of scrap, end-pieces, non-reusable mandrels, etc., generated through job work. This is applicable for the raw material supplied by HAL. The scrap, end-pieces, non-reusable mandrels, etc., generated from the Job work shall be disposed by paying statutory levies as applicable. The relevant documents and reference of scrap disposal record shall be kept for the Verification of HAL or Competent Authorities Scrutiny/Audit.
16) Vendor can enter "0" Values for partial Regrets for Line Wise Items, since the cells accept only "numerical values" and In case if they want to regret the whole Tender, "Regret" can be qualified in the additional notes as provision given below.
17) Integrity Pact (IP) : The Vendor has to Compulsorily submit the duly signed Integrity Pact as per the Prescribe format of HAL only if where the order Value is > 5 Crore before placement of PO. The vendor will subcontract any portion of the SOW to a third party and the value of such subcontracting will be Rs. 2 Crores or more, the vendor should sign and submit a tripartite Integrity Pact (HAL, vendor and subcontractor) in a format to be specified by HAL
18) HAL reserves the right to place Repeat Order up to 100% of the value & quantity of the original order for any additional quantity requirement after placement of the original order (or) within 12 months from the date of completion of the original order.
19) The other general terms and conditions will be indicated in Annexure- II. The Vendor should submit the Commercial Quote taking in to consideration of all the Annexures and Scope of Work as as referred in the RFQ
20) In case you are not submitting an offer against this enquiry, the drawings & other documents enclosed shall be returned positively.
21) Supplier (Vendor) should have Security Clearance issued by concerned Police Authorities and should have clear Police Verification Report (PVR) at all times in their possession to be issued to the Purchaser (Vendee) on specific demand.
22) Deviation Statement: Company will appreciate submission of offer based on the terms and conditions in the "RFQ" & “Scope of Service”, etc. to avoid wastage of time and money in seeking clarifications on technical / commercial aspect of the offer. Any deviation in reference to Commercial Terms & Conditions and its justifications must be submitted in the Deviation Statement format as per Annexure - V of RFQ Document only.
23)Risk Purchase: In case the supplier fails to execute the order in time either in terms of quality and quantity, HAL reserves the right to procure from elsewhere at the risk and the cost of the supplier and any extra expenditure incurred due to this purchase is payable by the supplier. In case the order is not executed to the entire satisfaction of HAL the Performance Bank Guarantee shall be forfeited. Besides intimation of risk purchase action.
24) Confidentiality: For the purpose of this Tender/Contract/Agreement ,The Bidder/Contractor/Supplier shall not store, copy or disclose HAL's data and information whether in written, machine readable or other tangible form or disclosed orally, that is of value to HAL. Also Bidder/Contractor/Supplier agrees to use HAL's data only for the purpose under this Tender/Contract/Agreement, restrict disclosure to any other person or entity or Third party and shall safeguard the provided data including from Cyber security risks etc. Bidder/Contractor/Supplier should promptly return within 90 Days HAL's data in original media and should not keep HAL's data, upon expiry of Tender/Contract/Agreement or early termination of Contract /Agreement and certify that HAL's data has been deleted permanently. Non- Adherence to this confidentiality clause by The Bidder/Contractor/Supplier shall be treated, as a material breach of this Tender/Contract/Agreement. The provisions of this clause shall survive and remain in force notwithstanding the termination or expiry of this Contract/ Agreement
25) Bidders are advised, in their own interest, to ensure that their bids are submitted well before the "Due Date & Time of Bid-Submission" of the Tender as HAL's "e-Procurement System" at https://eproc.hal-india.co.in will not allow submission of bids once the closing date and time of the Tender (i.e., Due Date & Time of Bid-Submission) is reached. HAL shall not be responsible, if bidder is not able to submit the bid on account of failure in network / internet connect. Quotation sent by any other modes like e-mail/Fax/Courier/Post/ Hand drop will be not be considered for evaluation. For general correspondence kindly mail to [email protected]
26) Register on TReDS Platform: “HAL is registered on TReDS Platform (Trade Receivables Discounting Systems), as being promoted by Government of India directive. It is suggested that all the MSMS vendors to take note of the same and consider for registering on any TReDS platform and avail the platform services which is being made available as per the Government Initiative.”
Important Note:
HAL has not appointed any agent in India or outside India for procurement of any items and deals directly with Vendors. In case any individual or firm approaches you posing themselves as an authorized agent of HAL. It is requested that you should not entertain such claim and in addition inform immediately to CM (External Source Department) Aircraft Division, HAL, Bangalore" .
Additional Notes if any:
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION, BANGALORE COMPLEX POST BAG NO. 1788, VIMANAPURA POST, BANGALORE-560 017 INDIA Phone: +91 80 22321585, Fax +91 80 22315188 Web Site: www.hal-india.com
ANNEXURE-III PRE-QALIFICATION CRITERIA (PQC)
Tender Ref No. A/OPEN TENDER/ESP/LCAMK1A-207/1/24 Dtd 03.09.2024 Tender Due Date: 23-09-2024
Scope of Supply OUTSOURCING OF PRODUCTION OF ELECTRICAL LOOM BOARD ASSEMBLIES FOR THE LCA MK1A PROGRAM. (ON PACKAGEWISE L1 OFFER BASIS)-(OPEN TENDER - TWO BID SYSTEM)
Tenderer / Bidder Details
1 Name of the Tenderer / Bidder M/s.
2 Nature of Organization (Govt. / Public Limited Co. / Pvt. Limited Co. / Partnership / Proprietary)
3 Address of Registered Office
4 Address in Bangalore
5 Contact Person & Designation with Mobile No.
6 Telephone No.
9 Please confirm whether the bidder is Unregistered / Registered / Composition Scheme in GSTN
10 GSTIN No. (Copy to be Submitted)
11 PAN No. (Copy to be uploaded)
12 Whether the Bidder is MSE as per MSMED Act (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by SC/ST? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by Woman Entrepreneur? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Bidders who wants to avail privileges given to MSME vendors, should have UAN. Copy of the Udyog Aadhar certification shall be submitted to consider such privileges to MSMEs.
13 Pl. indicate whether the bidder is blacklisted or delisted. (Bidders who are blacklisted or delisted from any PSU / Govt. Departments will not be eligible to participate for bidding)
14 Whether the Bidder is a Registered Vendor with any of the HAL Divisions.
If 'Yes', please confirm the name of HAL Divisions where you have registered and provide the details such as Vendor Registration No. & Category and UPLOAD related documents to support your claim.
15 Pl. confirm the address to which PO to be placed in the event of acceptance of your tender after bid evaluation.
16 Bidder shall indicate their GeM (Government e Marketplace) Seller ID.
17 Please upload your Bank details in NEFT/RTGS/ECS format duly authorized by concerned Branch Manager of the Bank.
BANK DETAILS (Copy of cancelled cheque leaf to be Submitted) Bank Account No.
Name of the Bank
Type of Account
COMMERCIAL COMPLIANCE MATRIX
Sl. No. Instructions Remarks Bidder Compliance
1.1 BID QUALIFYING CRITERIA (ESSENTIAL):
1.1.1 DETAILS OF CONSTITUTION OR LEGAL STATUS OF THE TENDERER: The Bidder should be a Company/Firm/Proprietorship having valid GSTN Registration and PAN in India. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.2 Bidder shall be an Indian Vendor or else their tender will be rejected. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.3 Bidder shall have Mandatorily CLASS III DSC from the authorised agency and got Registered with HAL E-portal to participate in the Open Tender. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.4 Bank Gaurantee,Indemity Bond, Insurance Policy: 1.Indemnity bond for Rs.18 Crs in favour of Aircraft Division, HAL covering the cost of material, which should be valid till completion of supplies +60 days. 2. Comprehensive Insurance policy covering potential risk to the HAL Aircraft Division supplied material including fire, theft, damages /loss of material etc. for an amount equal to estimated cost of material, which should be valid till completion of supplies+60days.such insurance policy will be assigned to Aircraft Div, HAL. 3.A BG for an amount, which depends on maximum value of materials held with subcontractor(Max.Rs.1 Lakh). Proforma for Bank Guarantee/Indemnity Bond /Insurance towards material supplied by HAL will be provided by us. Essential-To Note & Confirm
1.1.5 The Bidder shall sign the legal instruments like Omnibus Non-Disclosure Agreement (NDA) as per the HAL prescribed format (Refer Annexure - IV) against supply of drawings, process sheets, documents etc Including soft and hard copies by HAL for submission of competitive quote in the HAL E-Portal. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.6 Earnest Money Deposit (EMD): The bidder shall be required to deposit earnest money of Rs. 75,000/- (Rupees Seventy Five Thousand only) for Indian Bidders. The EMD shall be submitted in Demand Draft/Banker’s Cheque/Wire Transfer only in favour of Hindustan Aeronautics Limited, payable at Bangalore and enclosed in a cover with tender reference and due date super scribed, and should reach the following address or the requisite amount to be Wire Transferred before Tender Closing date & Time. Deputy General Manager [External Source Department], Hindustan Aeronautics Ltd., Aircraft Division, Bangalore Complex, Bangalore-560017.India Ph : 080-22322243/1519 For Wire transfer, please make use of the following bank details: ACCOUNT NAME: HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION ACCOUNT NO: 39187601793 IFSC CODE : SBIN0001114 BANK NAME : STATE BANK OF INDIA, HAL BRANCH However EMD is exempted for PSUs, Other entities in the Govt Sector, MSEs Exempted by Govt Policy and foreign vendors. Vendor has to submit relevant documents MSME, Udyog Aadhaar etc., for claiming exemption. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.6 Integrity Pact: IP is applicable only if quoted value exceeding Rs. 5 Crores (or such amount amended from time to time) i. Bidder shall submit duly signed Integrity Pact (Either Standalone IP (Format B1) or Omnibus IP (Format B2)) on or before Indent due date and time, strictly as per the format (without any material change/deviation) soft copy is enclosed with the RFQ Annexure V-B1 & V-B2. ii. Bidder can select either Standalone IP or Omnibus IP for signing with HAL. iii. Bids/offers without duly signed Integrity Pact (Either Standalone IP or Omnibus IP) will be summarily rejected and will not be considered for further evaluation. iv. Duly signed Integrity Pact (Either Standalone IP or Omnibus IP) with any material change/deviation (from HAL’s approved format) will not be considered. If you have already submitted omnibus IP against HAL’s previous indent then it is not required to submit fresh IP. However previous Indent reference number with complete details should be indicated. v. All pages to be initialled by Buyer and Bidder/Seller. To Note, Confirm & upload the relevant documentary evidence.
vi. Independent External Monitors (IEM's) has been appointed by the Central Vigilance Commission, a statutory body. Name and E-mail ID of IEM's at present is as below. Name: Shri Gangaram Aloria, (IEM) E-Mail ID: [email protected] Name: Shri Rajiv, (IEM) E-Mail ID: [email protected] vii. The bidder is required to submit his bids/offers and duly signed Integrity Pact (Either Standalone IP or Omnibus IP) directly to HAL at following address, and not to IEM. Deputy General Manager(Purchase) Hindustan Aeronautics Limited, (Aircraft Division) Post Bag 1788 Vimanapura Post BENGALURU 560 017 viii. The bidder may approach the nominated IEM only for Integrity Pact related issues. Bidders may seek all clarification on specific Tender/RFQ/NIT related queries on-line only from the Contact Person, within the specified period as mentioned in the Tender Notification.
1.1.7 Experience:
a Vendor shall provide performance feedback from any one of their customer with contact details to whom similar Capacity of PRODUCTION OF ELECTRICAL LOOM BOARD ASSEMBLIES which have been supplied in the last 5 years. For this condition, Exemption not applicable for Start ups & MSE vendors. Essential-To Note, Confirm & upload the relevant documentary evidence.
b HAL reserves the right to verify the information by the vendor. In case the information is found to be false/ incorrect, the offer shall be summarily rejected during pre bid meeting/ Technical Bid / Commercial bid stages Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.8 Submission of BID (Techno Commercial) by any Unregistered Vendor of Aircraft Division, such Vendor will be assessed by the Technical Team during Technical Evaluation stage. Based on the outcome of the assessment report of the Technical Committee Vendor shall be Qualified/approved for opening of Commercial Bid. Noted & Confirmed
1.1.9 Pre-Bid meeting: Pre-Bid meeting is mandatory and vendors must attend on or beofore 21.10.2024 to discuss any Technical Clarification noticed by the Vendor for better understanding for submission of Competitive Quote and also to assess the vendor for qualification to issue engineering data after satisifying all essential parameters only as mentioned in the PQC by HAl team . The Vendor has to give prior confirmation by E-mail for attending the Pre-Bid meeting with furnishing the Representative names and Government ID proof for attending the Pre-Bid Meeting putting request to DGM (ES) to email id ([email protected]) & contact No: 080-22322243/1519. Essential
1.1.10 The Models/Drawings/HAL standards and process for submission of competitive quote will be shared through encrypted DVD only through returnable gate pass ( DVD should be return to HAL compulsorily) on Bidders who are attending pre bid meeting and fulfilling all essential parameters mentioned in the PQC. Vendor should submit duly signed with authorised seal of the company with respect to mandatory Pre-Qualification Criteria (Annexure-III) To that extent Vendor shall sign the Omnibus NDA ( authorised person only should sign) as per HAL prescribed format which uploaded in the Tender documents of the e-procurement portal (Refer Annexure IV). Essential-To Note, Confirm & upload the relevant documentary evidence.
TECHINCALCOMPLIANCE MATRIX
A For Manufacturing and Supply of Loom Assemblies (Supplier Scope of Work) Category (Essential/ Desirable) Indicate "Complied/Not Complied" Vendor's Remarks if any
1 APPLICABLE DOCUMENTS: Supplier shall comply with the following documents during fabrication and supply. Supplier shall follow the latest revision levels that are applicable at the time of fabrication: -LCA WIRING MANUAL / VENDOR CATALOGUE/DOCUMENT ON ELECTRCIAL LOOM FABRICATION. -LCA MK1A DRAWINGS, MATERIAL SCHEDULE AND CABLE LIST -LCA BOARD DRAWINGS -PRODUCTION QUERY DISPOSITIONS -ROUTE CARDS Essential
2 WORK SCOPE: -All Production of looms that shall be ordered will be manufactured and tested in conformance with applicable documents mentioned in this SSOW by the supplier. - All project materials used in the manufacture of the cable assemblies like cables, sleeves, labels, connectors, back shells, switches, lacing cord, tie-wraps, brackets, etc will be supplied by HAL. - Non Project Consumables like cotton thread, masking tape, cleaning agent, acetone etc to be borne by the supplier. - Hand tools like wire strippers/blades (for light weight cables and conventional cables), crimping pliers, locators, dies, banding tools, nippers, knives/hot knives/hot tweezers, scissors, industrial multimeters, IR/Megger meters, hot air guns, soldering stations, power supplies etc and equipments like computer, laser printer etc to be borne by the supplier. The list of tools/specification details shall be provided by HAL. Essential
3 NATURE OF WORK AND PROCESS SPECIFICATIONS: (i) Printing on wires shall be made by Laser Wire Marking i.a.w with the printing files provided by HAL. (ii) Printing on sleeves shall be made by Thermal transfer printer i.a.w with the printing files provided by HAL. (iii) Printing on labels shall be made by Thermal transfer printer i.a.w with the printing files provided by HAL. (iv) Stripping of wires shall be made i.a.w LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012. (v) Solder Sleeve shall be made i.a.w LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012. (vi) Termination of single & multi core wires shall be made i.a.w LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012. & Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011. (vii) Splices shall be made i.a.w LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012. & Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011. (viii) EMC coding of wires shall be made i.a.w Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011. (ix) Protective sleeve shall be made i.a.w Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011. (x) Back shell and Moulded parts i.a.w Wiring Manual Report No: HAL/ARDC/LCA/ELE/088 Issue: Nil, Amendment: Nil, dated 01/10/2011 (xi) Connector and End finalizations shall be made as per standards referred in LCA/MDS/D184/12 Issue: Nil, Amendment: Nil, dated 30/6/2012.. (xii) Electrical Connections shall be made as per LCA MK1A Drawings and cable list. (xiii) POTTING for Submerged Connectors shall be made as per HAL-ARDCLCA_ELE_051 (xiv) Bonding and Earthing surface preparation shall be made as per HALARDC-LCA-ELE-184 (xv) HAL/ARDC/LCA-MK1A/ELE/010 shall be referred for fabricating and finalising Arinc818 video cables with Octonet contacts. (xvi) Authenticated copy of printing files will be provided by HAL for printing on wires/cables, sleeves, labels. Note: Supplier shall follow the latest revision levels that are applicable at the time of fabrication. Essential
4 TESTING AND INSPECTION: Looms acceptance Test shall be performed at Supplier's facilities. Supplier shall perform inspection along the manufacturing process, in order to confirm to requirements of applicable documents. -Visual inspection -Wiring continuity -High voltage test, where applicable -500 VDC Insulation test -Electrical bonding test, where applicable Supplier shall establish and maintain a quality control system. Supplier shall prepare the documents as per QAP. Supplier shall prepare the process sheets and obtain due approval from HAL Continuity and Megger checks are to be carried out by Supplier after every loom fabrication Essential
5 FIRST ARTICLE INSPECTION: Supplier shall perform, to the satisfaction of HAL, First Article Inspection (FAI) on each relevant part, sub-assembly and assembly of such first Production of looms in accordance with the First Article Inspection procedures and requirement set forth by Quality Assurance of HAL. Essential
6 TOOLING: Supplier shall be required to buy, Fabrication, Assembly and Inspection Tooling that shall be capable of producing looms. Procurement of Instruments and Equipment, hand tools and manufacturing of loom board to carryout LCA MK1A looms is at Suppliers expense and no cost to be accounted to HAL. Supplier shall use calibrated tools / test equipment for loom manufacturing /testing. The Supplier shall use Loom Board drawings (updated to the latest engineering information) hard copy and a computer file duly vetted by HAL QC in concurrence with certifying agencies. Essential
7 Availability of tools and equipment at 70% -80% level is a acceptance criteria. Supplier should give an undertaking to procure balance 20-30% of tools and equipment required for execution . Essential
8 MANPOWER REQUIREMENTS: The Supplier undertakes to employ only suitable skilled (Electrician should hold soldering process certification), competent and qualified personnel in performing the Supplier’s allocated tasks according to the terms of the Agreement. Essential
9 QUALITY ASSURANCE: Any clarification during the fabrication of the looms to be intimated by the supplier to HAL for clarification and work to be continued only on receiving the disposition, to avoid unnecessary rejections/snags. Supplier shall rework (to confirm the applicable Manufacturing and Assembly drawings) in-case of any non-conformance on product, at its own expense. In the event of rejection of a Product, HAL will issue a Part Disposition Report. Supplier shall investigate the cause of the rejection and shall immediately commence corrective action. Essential
10 QUALITY REQUIREMENTS: a. All the acceptance criteria and inspection requirements to be followed by Supplier shall be as per Quality Assurance Plan of HAL QA approved by ORDAQA/DGAQA, for manufacturing of MK1A Looms Assemblies which will be provided before the placement of P.O. b. Vendor shall supply certified assembly with Accepted Tags, Work done Test report , COC in co-ordination with HAL QA/ ORDAQA and shall ensure that the completed and accepted assemblies are packed and stored together and appropriately protected to prevent damage during transportation for moving to the next stage. c. Work order system as per work order Number of Route card should be maintained by Vendor to ensure traceability which would be subject to scrutiny by HAL d. First Article Inspection (FAI) for 21 Nos. Looms assembly of 1stAircraft: FAIR shall be done in accordance with AS9102. FAI done by the firm shall be inspected, verified and clearance to be taken from M/s HAL- QA in concurrence with DGAQA before undertaking batch production. e. Execution of operations involved in Route Card as per the standards and Drawing. Vendor has to establish their own QASP for Special process soldering in line with QASP-22 and AFQMS Issue II 2018 requirement. f. Operations like stripping, crimping etc. mentioned in the route cards are to be carried out only by the trained technicians approved by HAL and Special Process like Soldering to be carried out by IPC or equivalent certified technicians as per AFQMS issue II 2018 requirements. g. Approval of Quality in charge / personnel by HAL QA in concurrence with ORDAQA /DGAQA before starting of inspection by Vendor QC and carrying out 100% Inspection of stages by HAL Approved vendor Quality personnel for Loom Assemblies as per Route Card and Drawings and final inspection stages in coordination with HAL QA/ORDAQA wherever applicable as per QAP for manufacturing of MK1A Looms. h. Vendor shall have QMS approvals such as IS09001:2000/AS9100 Rev D for their facilities. i. Vendor shall ensure a clean Lab environment (temperature and humidity control, illumination, dust-free and pest-controlled atmosphere). j. Potting compounds must be stored below the specified temperature of 80°F/26°C k. Use of shelf life expired items is prohibited and a designated place shall be identified for the storage of such items. l. Dedicated storage facilities for items supplied. m. Controlled environment for storage of items as defined in build documents. n. NABL accreditations for calibrations for measuring &testing equipment, soldering machine, Crimping Tools etc. only to be used for fabrication, testing and Inspection Loom assemblies. o. Loom Boards: For fabrication of Loom assemblies, all 21 Nos. of Loom Boards has to be cleared by HAL QC in concurrence with DGAQA. p. All project consumables including soldering materials will be supplied by Aircraft division only will be used for fabrication of loom assemblies. Essential
11 CHANGE: Any Design changes directed by HAL prior to the delivery date of a Product shall be implemented by Supplier prior to delivery of such Product to HAL in accordance with the mutually agreed delivery date specified in the respective purchase order. Essential
12 DELIVERY OF PRODUCTION OF LOOMS: Upon successful completion of all the FAI on a Production of looms, Supplier shall deliver the respective looms to HAL. Each Loom shall be packed separately with proper protection. The harnesses plugs shall be covered with plastic cover. Each Production shall bear a nameplate containing the Looms part number and Serial Number, and shall be accompanied by the following documentation: 1. Certification of Conformance (COC) 2. List of Non-Conformance Reports 3. All applicable test results Essential
The blank box highlighted in yellow colour shall be filled by the Vendor and uploaded the dully filled format with authorised seal and Signatory along with commercial quote Bid of the above E-Tender mandatorily.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
e-Tender-Notification-OPEN-TENDER.DOC-NEW.pdf
TENDER_DOCUMENT • 0.14 MB
ANNEXURE-I-TECHNICAL-BID-LCAMK1A-207-NEW1.xlsm
TENDER_DOCUMENT • 0.02 MB
ANNEXURE-II-COMMERCIALTERMSANDCONDITIONS-LCAMK1A-207.xls.xlsm
TENDER_DOCUMENT • 0.04 MB
ANNEXURE-VI-IP-Omnibus.doc
TENDER_DOCUMENT • 0.08 MB
RTGS-NEFT-FORMAT.doc
TENDER_DOCUMENT • 0.03 MB
ANNEXURE-V-DEVIATION-STATEMENT.doc
TENDER_DOCUMENT • 0.04 MB
COMMERCIALQUOTEFORMAT-LCAMK1A-207-OPEN-TENDER-NEW1.xlsm
TENDER_DOCUMENT • 0.03 MB
ANNEXURE-IV-Omnibus-NDA-Outsourcing-2024.doc
TENDER_DOCUMENT • 0.07 MB
ANNEXURE-III-PRE-QUALIFICATION-CRITERIA-NEW.xlsx
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .