Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC NO 3D MANDHAVEIL KALLAKURICHI TALUK DISTRICT 606 202 | KALLAKURICHI | TAMIL NADU | 606202 | ₹15.9 L | L1 | Accepted-AOC L1 accepted |
| 2 | L2₹15.9 LRejected-Finance | ₹15.9 L | L2 | Rejected-Finance Highest Value |
| Sl No | Description | Qty | Unit | MMRAVI L1 | selvaraj L1 |
|---|---|---|---|---|---|
| 1.00 | Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification | 52 | M3 | 265 ₹13,780 | 265 ₹13,780 |
| 2.00 | Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification | 8 | M3 | 5,745 ₹45,960 | 5,745 ₹45,960 |
| 3.00 | Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc. Centering for soffits of RCC slabs plain surface including strutting upto 3 meter height using mild steel sheet of size 90cmx60cmx10 gauge with MS angles of size 25mmx2mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced upto 90cm c/c and supported casurina props or 10cm to 13cm dia spaced at 0.750cm c/c complying withstandard specification. Footing, side wall & Grade Beam | 45 | M2 | 715 ₹32,175 | 715 ₹32,175 |
| 4.00 | For Coloumn | 31 | M2 | 1,245 ₹38,595 | 1,245 ₹38,595 |
| 5.00 | For Roof | 47 | M2 | 940 ₹44,180 | 940 ₹44,180 |
| 6.00 | Supplying and fabrication placing in postion of M.S. (or) RTS rods for required size and length as directed by the departmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification | 1,600 | kg | 95 ₹1.5 L | 95 ₹1.5 L |
| 7.00 | Reinforced cement concrete 1:1/2:3 mix using 20mm ISS metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification | 19 | M3 | 8,745 ₹1.7 L | 8,745 ₹1.7 L |
| 8.00 | Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standard specification. | 20 | M3 | 495 ₹9,900 | 495 ₹9,900 |
| 9.00 | Brick work in following Cement Mortar using best quality ground mould chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally, other type of bond shall be done as directed by the Executive Engineer in charge. | 35 | M3 | 7,865 ₹2.8 L | 7,865 ₹2.8 L |
| 10.00 | Supply and applying of two coat of putty using 3mm thick including cost and conveyance all material to site directed by departmental officers etc, complete complying with standard specifications. | 72 | M2 | 275 ₹19,800 | 275 ₹19,800 |
Tender Value
Refer Docs
EMD Value
₹19,000
Closing Date
12 Jan 2026, 3:00 pmClosed
EXECUTIVE OFFICER, VADAKKANANDAL TOWN PANCHAYAT
EXECUTIVE OFFICER, VADAKKANANDAL TOWN PANCHAYAT
Construction of Community Toilet Ward no.17 Akkarayapalayam New Colony in Vadakkanandal Town panchayat.
2026_DTP_639950_1
A1/265/2025
Open Tender
Civil Works
90 days
VADAKKANANDAL TOWN PANCHAYAT
refer the tender notice
1 document required · 1 mandatory
₹0
₹19,000
19 Mar 2026
7 Jan 2026
13 Jan 2026
7 Jan 2026
12 Jan 2026
7 Jan 2026
Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification
Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification
Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc. Centering for soffits of RCC slabs plain surface including strutting upto 3 meter height using mild steel sheet of size 90cmx60cmx10 gauge with MS angles of size 25mmx2mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced upto 90cm c/c and supported casurina props or 10cm to 13cm dia spaced at 0.750cm c/c complying withstandard specification. Footing, side wall & Grade Beam
For Coloumn
For Roof
Supplying and fabrication placing in postion of M.S. (or) RTS rods for required size and length as directed by the departmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification
Reinforced cement concrete 1:1/2:3 mix using 20mm ISS metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standard specification.
Brick work in following Cement Mortar using best quality ground mould chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally, other type of bond shall be done as directed by the Executive Engineer in charge.
Supply and applying of two coat of putty using 3mm thick including cost and conveyance all material to site directed by departmental officers etc, complete complying with standard specifications.
Plastering with cement mortar 1:3 mix to 12mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
Plastering with cement mortar 1:5 mix to 12mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.
Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of 300x200x6 mm sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm
Supply, fabricating & fixing in position of M.S door of size 0..90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.
Supply and fixing in position of RCC Jolly of size 0.45 x 0.45m including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.
Supply and fixing of MS Grill Gate for Entrance including cost and conveyance of all materials to site and all other labour charges etc., to complete as per std., specification.
Supply and fixing in position of indian make colour water closet of size 58 cm (23inches) oriissa pan type with P or S trap and with sand cushion and etc., complete with necessary connection including cost and conveyance of all materials to site and all labour charges etc., complete as per statard specification
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings...
Manufacturing Supplying and fixing of stainless Steel Hand rails for staircase near wet raiser using 50mm dia 304L Grade Stainless steel pipe of 1.60m thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia 1.60m thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stailess Steel circular base plate of 304 Grade. The rate is inclued for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, eletrical charges, ect, complete complying with standard specification.
Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers.
Supplying and fixing in position best Indian make Aluminium anodised TOWEL RAIL of approved quality and size 60cm long and 20mm dia with brackets of same material including fixing with necessary teak wood plugs C.P. Screws etc., complete as directed by the departmental officers.
Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.
Supply and fixing of manhole cover including cost and conveyance of all materials to site and all other labour charges etc., to complete as per std., specification.
Supply and delivery of 2 HP( 50 x 60 lpm x m ) Openwell submersible motor with pump set including all labour charges etc., complete.,
Supply and delivery of 2 HP single phase panel board with automatic including cost & conveyance of all materials to site and all labour charges etc,. complete.
Supply and delivery of MS kiosk of size 0.75mx0.45mx0.75m made up of MS angle of size 50mmx50mmx3mm around covered with 18 gauge MS sheet and kiosk door made up of MS plates of size 25mmx3mm including, locking arrangements and labor charges etc., complete
Labour charges for erection of 1.50 HP Submersible motor including cost of all charges etc, complete
Supply and Fixing of 2000 Lit Capasity HDPE Tank including cost and coveyance of all charges etc., complete
Wiring with 2 x 2.5 sq.mm PVC unsheathed Sc.alu. cable of 650V grade in suitable TW Fillets on wall and ceiling with PVC accessories and with TW switch box with painting of suitable colour light point and Fan point. SD 16
Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb, wire and making good of the concealed portion with suitable colour SD 83
Towards cost and supply of GI Pipe 40 mm dia from app company including of all charges etc.
Towards labour charges for Laying and Jointing of GI pipe and Specials including all charges etc., complete complying with standard specification..
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_766203.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid