Construction of New PWD Rest House and 2 Nos. 550 Sqft. Class-IV Residence at village Patauda in Jhajjar District (Providing EI Estate and Street Light only)

Amount

HSR Items

[23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA

[23.22.3.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 3.3. Supply and erection of sheet steel enclosures 1pole/2 pole/4 pole on wall/on existing pedestal complete as required. TPN enclosure suitable for TP , TPN or FP MCB

[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole

[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.

[24.5.2.2]MISCELLANEOUS ITEMS 2.2. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 50/40 mm outer dia/ inner dia

[24.8.1]RCC FOUNDATIONS FOR OCTAGONAL POLES 1. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 3m high pole

NS Items

Supply and erection of MS Saddle and clamps duly galvanised, on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work.

Supply and Erection of Decorative Flox pole height 3 mtr. of GLOWMAC Make having Model No.GL-PL-Flox or its equivalent make of Twinkle, Mayfair, Vipin ST lower part having 114 mm dia and 1 Mtr. height upper part of the pole having 2 Mtr. height and 60 mm dia painted in 3 layer of Primer EPOXY Primer and 3rd layer of PU paint respectively base plate having 340 mm dia x 10 mm thick with service window out 4 way connector 40 amp. suitable for 10 sqmm wire with 6 amp. single pole MCB complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply and Erection of Decorative Post Top fixture of GLOWMAC Make having Model No.GL-PT-Mini Allegro or its equivalent make of Twinkle, Mayfair, Vipin ST 374 mm width and height of fixture is 305 mm which is suitable for 60 mm mounting fitting made with corrosion resistant die cast aluminium, rubber gaskets with TTN diffuser is used with 40 / 50 Watt LED fixed inside. Decorative casting parts are PU painted in three layer coating in which 1st layer with primer, 2nd layer with EPOXY primer and 3rd layer with PU Paint complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply and Erection of LED Flood Light 150 Watt fitting Bajaj Make GLEAM F 165 L WH SY PC SD V2 or its equivalent model and specifications of Wipro / Phillips / Jaquar / Orient Make with pressure die cast aluminium housing, IP-66 reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work

Supply and Erection of Underground cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work. Make: - Polycab / RR / Grandlay i) 16 Sqmm 4 core Ard. Cable

VIJAY KUMAR CONTRACTOR

M/S PANJETA ELECTRICALS

Mandeep Singh

Balraj Singh Contractor

DEVENDER KUMAR CONTRACTOR

kunwar electricals