PROVN OF TOILET NEAR BLDG NO 165 AT NIC VEHIVLE PARKING SHED NEAR BLDG NO P 165 AND P 166 AT NTS COVERED PARKING SHED WITH FENCING NEAR P 165 AT NTS COMPOUND WALL AT CERTAIN LOCATIONS IN OLD CAMP AT AFSSR DHOLPUR STONE AT CERTAIN LOCATIONS IN OLD CAM

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Rolling and consolidating formation surface with 8 to 12 tonne power roller to required gradient and camber etc complete all as specified and as directed

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M&L for hardcore of gauge n exc. 63mm, with broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and as directed.

M&L for Damp proof course 40mm thick in PCC (1:2:4), type B0 (using 12.5mm graded crushed stone aggregate) with WPC (WPC shall be measured and paid separately) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam etc complete all as specified and as directed.

M&L for formwork to soffits of suspended slab such as roof slab, floor slabs, landing and similar work not exceeding 200 mm thick (horizontal or slopping ) etc complete all as specified and as directed.

M&L for formwork to soffits to edges of concrete flats, teads, breaks in floors, window, cills, concrete railing opening in concrete walls, floors and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide etc complete all as specified and as directed.

M&L for providing reinforced cement concrete M-20 design Mix (using 20 mm graded crushed stone aggregates) as in Slabs supported on walls, roof beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed.

M&L MS TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking bending sprirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for TMT bars 5 mm dia and over, upto and including 10 mm dia as in stirrups, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring etc complete all as specified and as directed.

M&L for PCC (1:3:6), type C1 (using 20mm graded crushed stone aggregate) as in plinth protection etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately.

Supply only WPC complete all as specified and as directed.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete ceiling surfaces etc complete all as specified and as directed.

M&L for preparing Newly Plastered surfaces of Walls by brooming down or steel wire brushing and scraping down and repair with putty wherever required and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for new plastered or unplastered surfaces of walls/ceiling by applying 3mm thick birla white cement wall care putty to get smooth & levelled surface for applying next treatment complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of distemper oil emulsion , white or tinted over a coat of primer (on prepared surfaces with birla white cement wall care putty in previous respective items) on wall/ceilings complete all as specified and as directed by Engineer-in-Charge.

M&L for formwork to sides chullah hoods, chajja, trough and similar items including edges etc complete all as specified and as directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (Nominal mix) (using 20 mm graded crushed stone aggregates) as in chajja etc complete all as specified and as directed.

M&L for Glazed ceramic ware coloured printed tiles 300x 450 x 6 to 8 mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to match the surface laid over and including 12 mm thick rendring in CM 1:4 on any faces of brick work for fixing wall tilesover and including bedding layer of cement mortar complete all as specified and as directed.

M&L for joint free non skid skretch proof stain resistant coloured ceramic tiles 400 X400 X 7 to 9 mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor laid over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed by Engineer-In- Charge.

M&L for 25 mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate for floor ,finishing the surface even & smooth without using extra cement complete all as specified & as directed by Engr -in charge.

M & L for 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls concealed band or laid under floors etc complete all as specified and as directed by Engineer-in-Charge.

All as per item Non30 here-in-before but 20mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade fixed to walls in any position or laid in floor/earth with dash true nut and bolt at every 2mtr length including) including all fittings and incl taking down old / unsv PVC pipes incl bengs & sockets complete all as specified and as directed by Engineer-in-charge.

S&F 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade fixed to walls in any position or laid in floor/earth with dash true nut and bolt at every 2mtr length including) including all fittings and incl taking down old / unsv PVC pipes incl bengs & sockets complete all as specified and as directed by Engineer-in-charge.

S&F 110mm bore PVC (SWR) bends any radius With or without access door complete all as specified and as directed by Engr-in-charge.

S&F 75mm bore PVC (SWR) bends any radius With or without access door complete all as specified and as directed by Engr-in-charge.

S&F Vitreous China wash down water closet (EWC) (Pedestal pattern) white as approved including all accessories like seat cover, CP Health faucet and CP jet complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F wash hand basin vitreous china white glazed oval type Size 550x400mm including, CP waste coupling and waste pipe brackets and cutting on granite top for and pinning in ends of brackets and etc complete in all respect complete all as specified and as directed by Engineer-in-Charge.

S & F bib tap chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S & F pillar tap chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S & F stop cock/angle valve chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S & F CP brass shower rose 125mm size with or without shivel joints incl CP Shower Arm minimum 200mm long fixing with 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S & F Aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

S&F PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts and washers etc complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous China Urinal of size 375x390x590mm flat back large including partation with CP waste coupling, waste pipe and CP spreader with CP connection pipe complete all as specified and as directed.

S&F Aluminium anodized powder coated Window/Ventilator Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/central Rail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate.

S&F PVC solid door frame 50mmx95mm made out of 5mm wood grain colour prelam PVC sheet reinforced with MS square tube complete all as specified and as directed by Engineer-In- Charge.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick wood grain colour prelam Moulded PVC sheet on the front face and 2 mm prelam PVC sheet on back face as per specification and drawing in SSR complete all as specified and as directed by Engineer-In- Charge.

S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-Charge.

S&F stainless steel 75 mm long butt hinges for PVC door shutters and frames complete all as specified and as directed by Engineer-in-Charge.

S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soil complete all as specified and as directed by Engr-In- Charge.

Removing excavated soil to a distance exc 1.50 Km mtr but not exceeding 5.00 KM mtr and depositing where directed etc complete all as specified and as as directed by Engineer in Charge.

S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI marked triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, complete all as specified and as directed. Make-SINTEX /POLYCON /Polywell.

S&F 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, any type as per site requirement complete all as specified and as directed.

S & F 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed.

Spreading and levelling in well layers not exc 25 cm thick including watering as required etc complete all as specified and as directed

M&L for reinforced concrete pipes, class NP3, laid and jointed complete with collars Salt glazed stoneware drain pipes 150mm size laid in trenches and jointed complete all as specified and as directed by Engineer in charge.

M&L for cement concrete 1:3:6 Type C2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes 300mm bore size after they are laid and tested complete all as specified and as directed by Engineer in charge.

M&L for cement concrete 1:2:4 Type B2 using 40mm graded stone aggregate as in foundations of manholes etc complete all as specified and as directed.

M&L for Pre cast cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate set in cement mortar 1:4 as in Manhole covers , shelves, Drain cover and similar items complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds, mitred/ stopped ends etc complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified and directed.

M & L for sand filling under floor or in foundation including watering and consolidation all as specified and as directed by engr-in- charge.

M&L for granite (Black) stone slab 18-20mm thick machine cut and machine polised, in skirting, Kitchen platform /dado, in floor etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge.

M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads etc complete all as specified and directed by Engineer-In-Charge

M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment complete all as specified and directed.

M & L for PCC 1:2:4 type C-2 (using 20 mm agg. ) as on roof flooring using WPC complete all as spd and directed.

M&L for rendering 10 mm thick in CM (1:3) with wpc on RCC Chajja / Facia over 20mm thick in CM 1:4 as dubbing coat etc complete all as specified and as directed.

M&L APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed.

M&L two coat of aluminium paint over top surface of water proofing membrane etc complete all as specified and as directed.

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 80 mm thick, M- 40 grade to match with grey cement and pigment etc complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded in mortor complete all as spd and directed.

Fixing only machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M- 35 grade to match with grey cement and pigment etc complete all as specified and as directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance and all as directed.

Excavation in post holes (or similar holes) in Hard /Dense soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed.

S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified.

M&L for preparation of new surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specifed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge.

S&F pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge.

M&L for 20 to 25 mm thick Kota stone slab flooring (Machine cut) of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring complete all as specified and as directed.

M&L for factory made pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.

M&L for preparation of new stone, concrete , cement surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a priming paints plaster coat of complete all as specified and as directed.

M&L for 40mm thick cement concrete 1:2:4 Type B1 using 12.5mm graded stone aggregate as in flooring, foundations, mass concerte etc complete all as specified and as directed.

M&L for Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

S&F Framed mild steel work as in posts/ struts in fencing including cutting tops to shape, drilling holes,bolting,rivetting flat etc. complete conforming to Fe-290 gde E165 complete all as specified and as directed.

S&F 10 mm dia Machine made screw bolts with hexagonal or square head at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut exc 5 and not exc 10 cm long complete all as specified and as directed.

S & F 10mm dia MS bars as in strainers for chain link fencing including necessasary welding and fixing to angle iron complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts etc. complete all as specified and as directed.

Supply only Chain link MS galvanised fencing , any size or type complete all as specified and as directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

M&L for RCC Pre-cast Cement Concrete 1:2:4 (12.5mm graded stone aggregate) as in Louvres and Jallies, 40mm thick (measured solid) with all mouldings including Reinforcement with 4.0mm dia Mild Steel Bars/ Wire and setting in Cement Morter 1:4 complete all as specified and as directed. NOTE : Cost of Mild Steel Bars/Wire as Reinforcement will deem to be included in the Quoted Unit Rate.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, mixed with water proofing compound complete all as specified and as directed. Notes : WPC shall be measured and paid seperately.

M&L for preparing newly Rough Cast plastered surfaces of Walls or new plastered wall surfaces and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.and fixed with L-type or J-type or cranked hook bolts in lieu of screw

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick backing coat in CM 1:4 to receive stone/tiles to vertical surface complete all as speified and as directed.

M&L for 16-20 mm thick dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25sqm area and not exceeding 0.5 sqm fixed with and including two number MS/SS clamps to be fixed to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment, complete all as specified and as directed. Note : MS/SS clamp measured and paid separately in approriate items.

Supply & fix MS clamps (combination of L shape and T shape) of flat 40/50mm wide x 3/4mm thick , overall 150mm long fixed with nut bolt minium 40mm L made to shape in each slab complete all as spd and as dircted by Engr-in-Charge.

M&L Cutting holes in brick walls/ stone wall ex half brick but not exc full brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as requiredcomplete all as specified and directed.

M&L for 4mm dia galvanised iron or steel wire fixed to wall with complete fittings including fastners, complete all as specified and as directed by Engr-in-Charge.

Supply, laying, jointing and testing of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLS Grade cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk-in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for the following :-

One light point controlled by one, one way switch with cables 1.5 Sqmm size all as specified and as directed.

One Ceiling fan/Exhaust fan point controlled by one, one way switch with cables 1.5 Sqmm size all as specified and as directed.

One 5 pin socket oulet 5/6 amps on same board including single core stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth dolly complete all as specified and as directed.

Supply and fix in repairs switch piano, flush type single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed.

Supply and fix of 12 watt 2 ft decorative box type fitting with coloured end caps for LED tube etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block and testing complete all as specified and as directed.

Supply and fix MCB, DB , SPN 8 way suitable for single phase 240 volts with 100 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCB's single/double pole complete all as specified and as directed.

Supply and fixing of MCB signle pole 5-30 Amps 230 volts 'B' series complete all as specified and as directed.

shiv shanker enterprises

M/s GANJOO AND CO

P R Constructions

Chaudhary Constructions

Orbital Infra Power

M/S GEETANJALI ENTERPRISES