Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹8.3 LAdmitted-Finance | -15.01% | ₹8.3 L | L1 | Admitted-Finance |
| 2 | L2₹8.7 LAdmitted-Finance | -11.10% | ₹8.7 L | L2 | Admitted-Finance |
| 3 | L3₹8.9 LAdmitted-Finance | -8.55% | ₹8.9 L | L3 | Admitted-Finance |
Tender Value
₹9.8 L
EMD Value
₹19,566
Closing Date
9 Mar 2026, 1:00 pmClosed
Executive Engineer
12, Cavalry Lane, Engineering Department, University of Delhi, Delhi-110007
Improving illumination level on the pathway and badminton Court and removing the darks spots of back side of residential Area of Jubilee Hall, University of Delhi
2026_DU_900466_1
CEET-7347
Open Tender
Electrical Works
30 days
North Campus
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Registrar, University of Delhi
₹19,566
24 Mar 2026
26 Feb 2026
10 Mar 2026
26 Feb 2026
9 Mar 2026
26 Feb 2026
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as reqd.
Providing and laying earth connection from earth eletrode with 6 SWG dia G.I. wire in 15mm dia G,I, pipe from earth electrode including connection with G.I. thimble excavation and re-filling as reqd.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as reqd.
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 Grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required
Upto 35 sq mm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as reqd
4x16 sq mm
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground ( 75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as reqd
63mm dia (OD-63 mm & ID -51 mm nominal)
Supply, installation, testing and commissioning of pre-wired, 150 watt, street light delievering 120 lumens/watt, IP 66 protection, PDC housing and high impact resistance (IK07) glass cover lumimiare 220-220V, 50 hz on existing street light pole/wall including all accessories and connection etc as required. (Philips make, Cat no. BRP335 LED180 CW R5C FG PSU S1 V1 or equivalent Model of Thorn/Trilux)
Supplying of one number PVC insulated and PVC sheathed/XLPE aluminium conductor armoured power cable of 1.1kV grade of size 4 x 16 sqmm etc as required
Supplying of one number PVC insulated and PVC sheathed/XLPE copper conductor un armoured power cable of 650/1100 kV grade of size 3C x 2.5 sqmm etc as required
Supply, installation, testing and commissioning of pre-wired, 150 watt, Flood light Pressure die-cast aluminium housing with high impact resistance (IK07) glass cover IP 66 protection, 130 lm/w, 220-240 V, 50 Hz on existing street light pole/wall including all accessories and connection etc as required. (Philips make, Cat no. BVP 192 LED 177 CW NB FG A1 PSU GR or equivalent Model of Thorn/Trilux)
Supplying and Fixing of 500 mm long Over hang following arm bracket made out of suitable dia G.I. pipe and suitable for 70 mm dia G I Pole including nut bolts etc as required (Make: Bajaj/Transrail/Jindal/Tata
Double Arm Bracket
Single Arm Bracket
Supply, Testing and commissioning of foolowing size HOT dip galvanized octagonal steel pole made out of 3mm thick sheet PCD 200 mm, having bottom 130mm A/F & top 70mm A/F with built in connector box of size 500 mm length, M.S. base plate of size 200mm x 200mm x12mm thick to accommodate the fitting on existing RCC foundation i/c S/F of 4 Nos. M-16 x 450mm long J Type (EN-8 grade) G.I. foundation bolts & nuts with 3 Nos. and 2 Nos. washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes (a) 6mm thick pheenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door ( b) S/F of Teriminal block suitable for 16 sq. mm conductor 4 Nos. & shorting links - 5 Nos. on DIN Chneels (c) Terminal suitable for 6 SWG GI Wire/ 1.5 sq. mm wire (d) 6Amp SPMCB 10 KA 'C' Series - 1 No. i/c mounting on DIN Channel. This includes making of foundation of size 1200 mm x 400mm x400mm made of cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 40 mm nominal size) with provision of IN and OUT slot for cable entry including excavation of and refilling etc. as required (Make : Bajaj/ Transrail/Jindal/Tata)
5 Meter height
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.49 MB
BOQ_946483.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid