NIT No GE/ND-79/2024-25

Amount

B&R PORTION: Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down 20 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing from site complete all as specified and directed.

Taking up or down 25 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing from site complete all as specified and directed.

S&F 15 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F 25 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F in repair 15mm bore dia Blush Gold PVD anglular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No OPP-BGP-15053PM or equivalent of make as specified in PS.

S&F in repair 15mm bore dia 2 way bib cock with wall flange with colour Blush Gold PVD including cover plate complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No KUP-BGP-35041PM or equivalent of make as specified in PS

S&F in repair 15mm bore dia Exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, with colour Blush Gold PVD (KUP-BGP-35233NKPM) with concealed body for single lever basin mixer wall mounted (ALD-CHR-233N) incl all required accessories/ fixture to make operation complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No as mentioned above or equivalent of make as specified in PS.

S&F in repair 32mm bore dia Bottle Trap size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Blush Gold PVD incl required concealed pipe upto trap with required accessories complete in all respect complete all as specified and directed. Make : Jaquar Cat part No ALD-BGP-769L300X190 or equivalent of make as specified in PS.

S&F in repair 15mm bore dia Exposed part kit concealed stop cock & flush cock (KUP-BGP-35083KPM) with fitting sleeve, Operating lever & Adjustable wall flange with seal, with colour Blush Gold PVD incl regular body of concealed stop cock (ALD-CHR-083) suitable for 15 mm pipe line with protection cap complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No as mentioned above or equivalent of make as specified in PS.

S&F in repair Antique Copper Robe Hook complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No AQN-ACR-7791 or equivalent of make as specified in PS.

S&F in repair Hand Shower (Health Faucet) with 8 mm dia, 1 meter long flexible tube & wall hook with Blush Gold PVD with check nut and washers complete all as specified and directed. Make : Jaquar Cat Part No ALD-BGP-573PD or equivalent of make as specified in PS.

S&F in repair Toilet roll holder with stainless steel flap with Blush Gold PVD paper holder complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No AKP-BGP-35753PS or equivalent of make as specified in PS.

S&F in repair Towel rack 600 mm long with Lower Hangers, Stainless Steel of Colour : Antique Copper complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No AKP-ACR-35781PS or equivalent of make as specified in PS.

S&F in repair Soap Dispenser with glass bottle with Antique Copper colour complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No AKP-ACR-35735P or equivalent of make as specified in PS.

S & F in repair PVC connections 15mm size with PTMT steel nuts of length 450 mm complete in all respect complete all as specified and directed.

S&F in repair Aquamax Exposed part kit of Thermostatic shower mixer with 3-way diverter (KUP-BGP-35683PM) with Colour : Blush Gold PVD, incl Kubix prime bath Spout with wall flange (SPG-BGP-35429PM), with Maze overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Sttainless steel ) with rubit Cleaning Syatem (OHS-BGP-1639PD) of colour : Blush Gold PVD, incl Maze Metal hand shower 90x90mm Square Shape single flow with rubit cleaning (HSH-BGP-1655PD), Over head Shower arm 600x25x25 mm Square Shape for wall mounted Showers with Flange (SHA-BGP-455L600) Flexible tube for hand shower 8 mm dia & 1.5 M long with nuts (SHA-BGP-549D8), wall outlet with shower hook in square shape (SHA-BGP-566SPD) incl cover plate, adjusting leg, concealed diverter and all required accessories/fixture complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No as mentioned above or equivalent of make as specified in PS.

S & F in repairs Glass Shelf assembly Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs corner shelf 304 x 304 mm size with 5mm thick toughened glass complete all as specified and directed.

S&F in repair Vitreous China Counter top basin of size: 615x415x150 mm in white colour with modern design with rectangular shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete all as specified and directed. Make : Jaquar Cat Part No DRS-WHT-37601 or equivalent of make as specified in PS.

S&F in repair (SLS-WHT-6953BIUFSM) in white colour Rimless, Blind Installation Wall Hung WC with UF soft close cover, Hinges and accessories set, Size : 375x520x400 mm, incl single piece slim concealed cistern body in white finish (JCS-WHT-2400) with installation kit with flush control plate kubix (JCP-BGP-352415) of colour Blush Gold PVD incl required accessories and fixture, making all connection to make it functional incl make good complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No as mentioned above or equivalent of make as specified in PS.

Demolition cement concrete (reinforced) in ground floors and upto 4 storey of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for reinforced cement concrete type B-1 1:2:4 using 20 mm graded aggregates (Nominal Mix) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling of wall and ceiling boards of any type or any size (fibre, pulp, insulation, etc) or insulation boards / slabs/ blankets, any thickness, incl cover fillet complete all as specified and directed.

S&F mineral fibre ceiling boards 16mm thick 600 x 600 mm size including grid 25x25x1.6mm thick GI powder coated angles 25 x35x1.6mm size ‘T’ section fixed with suspenders from ceiling etc (Armstrong RH Dune 99, Aerolite) complete all as specified and directed.

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Cement concrete 75mm thick type D-2, 1:4:8 (using 40mm graded stone aggregate) in concrete sub base / floors pavings etc finished even & smooth with out using extra cement complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off the shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sqm but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Material and labour factory made prelaminated FPVC (Foamed polyvinyl chloride) door frame of size 105X40mm with wall thickness of 10mm made out of extruded rigid FPVC profile mitred joined with 06 Nos of 50mm long crew. The door frame shall be fixed to wall by using 100mm long screws through the frame with the help of Dash fasterners of 4 Nos to be provided for each vertical memeber, GI stiffeners of (U channel of size 29X9X1mm, 150mm long) -4Nos at hinge point. Frame reinforcement of U GI channel of size 46X22X0.06mm ), bottom tie rod of U GI channel size 15X15X1mm etc complete as per manufactueres specification for finished item of work complete in all respect complete all as specified and directed. Make : M/s NCL seccolor-Eco 4000 series window/ventilators / M/S Blue Valley Colour Coated steel & UPVC by M/S Blue Valley Developer Pvt. Ltd. / M/S Deccan Engineering and Fabricators.

Material and labour 35mm thick factory made prelaminated ABS (acrolynitrile Butadyne styrene) door shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20X32mm , reinforced by 32X32mm-2Nos for vertical made out of LVL(Laminated veneer lumber ), core material of 32mm thick high density craft paper honet comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the verticals for each shutter . The cost of unit rates includes the following hardware items per each shutter :- Four No's Stainless steel butterfly hinges size 100X50X3mm appx,two no's brass tower bolt of size 250mm, two no's brass door handles of size 250 mm (to be fixed to shutter with steel nut and bolts), one door stopper 75mm and brass aldrop bolt 250mm (to be fixed to shutter with steel nut and bolts). All hard ware items except handles & aldrop bolt shall be fixed with SS screws of sufficient size complete in all respect complete all as specified and directed. (hardware fitting approved by EIC) Make : M/s NCL seccolor-Eco 4000 series window/ventilators / M/S Blue Valley Colour Coated steel & UPVC by M/S Blue Valley Developer Pvt. Ltd. / M/S Deccan Engineering and Fabricators.

S&F stainless steel autocloser hinges of size 100 mm with SS screw for door complete all as specified and directed.

S & F glass made wall mounted (removable bottle) sensor fitted automatic liquid Soap Dispenser complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of approved colour, size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri / Fenesta / Ecocell

Providing and fixing Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain CNC cut Flush Door Shutter of required colour, pattern and size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws and all required brass accessories like handle, tower bolt, sliding bolt, hinges and megnetic lock of required size and pattern decided by Engineer -In-Charge including Make good the damage portion with plaster, making edges and painting by contractor on his own expense complete All asspecified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Make : Rajshri / Fenesta / Ecocell

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, incl all required hardware fitments complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Stainless steel fastener of size 150 to 200mm for fixing WPC door frame and like in position complete all as specified and ditected.

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed..

S&F 12 mm thick toughend glass door (shutter ) with hydraulic floor spring and top pivot and with set of new SS hydraulic floor spring & top pivot sufficent to operate for the glass doors with weight of 120-150 Kg incl cutting to shape, drilling holes required incl figured glass film on one side complete all as specified and directed.

S&F in repairs CP grating 125 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as specified and directed.

S&F in repair sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints but fixed to wall for 100 mm bore complete all as specified and directed.

S&F in repair sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls for 75mm bore complete all as specified and directed.

S&F in repair sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in floors for 75mm bore complete all as specified and directed.

S&F in repair Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 100 mm bore complete all as specified and directed.

S&F in repair Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 75mm bore complete all as specified and directed.

S&F in repair Cast iron branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallel branches for 100 mm bore complete all as specified and directed.

S&F in repair Cast iron branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type)or with parallel branches for 75mm bore complete all as specified and directed.

S&F in repair Cast iron vent cowl for 75 mm bore complete all as specified and directed.

S&F in repair Cast iron floor trap 75 mm bore dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 18 mm thick MDF board pre laminated both side (of approved colour) fixed with screws as in storage cabinet/Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 600 Kg /cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary Aluminium hardware fitting i.e Piano hinge ,handle, ball catchers including mortice locking arrangement, hole cap including lipping etc, and siliding rail in each Cup board complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick (approved colour) machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 20 mm thick granite (of any type) (approved colour) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, coking plateform and other similar situations complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for vitrified ceramic light shade matte finish tiles 10 mm thick (square /rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed. (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour)

All as per item No 61.00 above but in skirting including 10mm thick backing layer of cement mortar 1:3 complete all as specified and directed.

M & L for Glazed vitrified coloured tiles of 10 mm thick in glossy finish of size 2 x 4 feet (60 x 120 mm) fixed in vertical surface with 10 mm thick backing layer of good quality tile adhesive (MYK Laticrete 325+ / Roff) (qty of water should be mix as per manufacturere's instruction) fix to wall incl cleaning work (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour) complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc incl removing outside MoD land complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM (1:6) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement (incl new brick work) complete all as specified and directed.

M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using roller brush over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

S&F in repair Urinal (Back inlet) with fixing accessories, (URS-WHT-13253N) Size : 385x325x635 mm in white Colour with Sensor mini concealed type flushing valve for urinal complete set with installation box (Battery Operated) (SNR-STR-51083) complete including providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl S&F of Battery operated urinal sensor flushing and incl required accessories for making connection with urinal, brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. Make: Jaquar Cat Part Nos as mentioned above or equivalent of make as specified in PS.

S & F in repairs 12 mm thick Toughened glass edges moulded fixed/inserted to wall upto 75mm depth alongwith stainless steel clamps suitable for bottom support for hanging the partion of toughened glass and making good joints with silicon complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint using roller brush (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of Exterior Emulsion paint (APEX ULTIMA) using roller brush over one coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.50mm thick putty complete all as specified and directed.

S&F glazed and gauzed three track aluminium powder coated sliding window of any size made out of Jindal extruded aluminum window classic 18mm series as mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasket and GI fly prrofing and aluminiun powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed as per following:- (a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958 (b) Shutter : top and side with section-20606, interlocking with section-20605 and bottom with section-20604, including make good of dismantled portion complete all as specified and directed.

Supply and Fixed Aluminium powder coated decorative grill with 6.3mm thick aluminum section and 100X100mm openings , weighing not less than 1.75Kg/Sqm and anodized aluminium 'U' shape channel frame work alround the grill and fixed with steel screws complete all as specified and directed.

S&F aluminium powder coated door using Jindal aluminum sections . Door chowkhat with section(14130) size- 101.6mm x44.45mm x 2.00mm and Doorshutter : vertical style with sections(19560) size- ( 85mmx44.45mm x 2.70 mmthick) , top rail section(19563) size- 85X44.45X2.0 thick ), lock rail section(15964) size- 100X44.50X2.0thick and bottom rail sectio (15964) size 101.60 x 44.50x2.50 thick ) incl 5 mm thick glass on top panel and Partly/fully fixed with 12mm thick prelaminated particle board fixed with aluminium snap beading and rubber gasket.The each shutter will be fitted with 01 No tower bolt 200mm, 02 Nos handle D type 200 mm long and one hydraulic floor spring & mortice lock complete all as specified and directed.

S& F glazed aluminium powder coated two track sliding window(area of each window not exceeding 1.50 sqm ) made out Jindal sections Seris B with 18mmm thick shutters extruded aluminum section as mentioned below and glazed with 4 mm thick glass fixed with rubber beading/gasket and aluminiun powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed as per following:- (a) Outer frame with rectangular tube jindal section (14073) 63.50X38.1X1.7mm thick , window Chowkat bottom section with (20956)size -61.85X31.75X1.05mm thick, top and sides with section (20966) size-61.85X31.75X1mm thick (b) Shutter top and bottom rail - Jindal section (20567) size 50 x18.80 x 1.50 mm thick , shutter inter lock with section (20576) size-40X18/28 X1.60mm thick and Shutter handle section(20577) - size 40X18 X1.70mm thick.

M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone ( Note:- Size and colour of stone to be matched with existing stone) complete all as specified and directed.

M&L for Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq m area and not exceeding 0.5 sq m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment comlete all as specified and directed. Note:- Size and colour of stone to be matched with existing stone

M & L for Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 (colour of tiles should be match will existing tiles) complete all as specified and directed.

M&L for vitrified ceramic light shade tiles10 mm thick (square /rectangular) area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick Screed bed or bedding layer of cement mortar 1:4 (colour of tiles should be match will existing tiles) complete all as specified and directed.

All as per item No 85.00 above but in skirting including 10mm thick backing layer of cement mortar 1:3 complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including backing layer 10 mm thick in CM 1:3 on wall (colour of tiles should be match will existing tiles) (Colour and pattern approved by EIC) complete all as specified and directed. Note :- The work described in these items shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. Note :- Removing building materials /debris / old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land.

E&M PORTION: Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 6 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 89.00 above but One light point controlled bye two no, two way 6 Amp switch complete all as specified and directed.

All as per item No 89.00 above but One three pin socket outlet 6 amps point controlled by one no, one way switch on independent board complete all as specified and directed.

All as per item No 89.00 above but One three pin 6 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.

All as per item No 89.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

S&F in replacement of modular Switch 6 amps,one module, 230 vots, single pole, one way (ISI marked) complete all as specified and directed.

S&F in replacement modular Switch 6 amps,one module, 230 vots, single pole, two way (ISI marked) complete all as specified and directed.

S&F in replacement 16 Amp rating modular switch one way one module complete all as specified and directed.

S&F in replacement of modular socket out let 230 volts, 6 Amp - 2/3 pin combined 2 module complete all as specified and directed.

S & F in replacement of TV socket AC 220 Volt cat5/6 complete all as specified and directed .

S&F in replacement of modular socket out let 230 volts, 16 Amp - 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement of PVC plastic MCB protected socket 20 Amps with MCB SP upto 16 Amps 230 volts AC and plug top 16 Amps complete all as specified and directed.

S&F in repair modular Fan regulator 240 volts complete all as specified and directed.

S&F in replacement of ceiling rose 3 terminal / PVC / Polycarbonate, insulated body complete all as specified and directed.

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 10 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 10 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

S&F in repair submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

S&F in replacement of factory made sheet steel distribution boards, double door, SPN 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

S&F in replacement factory made sheet steel distribution boards, double door, SPN 08 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

S&F in replacement of factory made sheet steel distribution boards, double door, SPN 4 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

Supply and fixing in replacement of 240V 10KA, B curve MCB SP 6 to 32 Amps complete with connection complete all as specified and directed.

Supply and fixing in replacement of 240V 10KA, B curve MCB SP 40 Amps complete with connection complete all as specified and directed.

Supply and fixing in replacement of MCB, 240V 10KA, B curve MCB SPN 32 Amps complete with connection complete all as specified and directed.

S&F in replacement of LED Tube Lightfitting of 20 Watt 230Volt (size 4 ft) complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement of aesthetically designed muziris decorative warm white LED pictur light/mirror light of 07 W CCT-3000K fixture with bronze finish for superior feel including suitable LED lamp of 07 W having LED Lamp base complete all as specified and directed. Make: Philips Cat Part No 31402 or equivalent of make as specified in PS.

S&F in replacement of LED Grandeur three head pendant hanging light fitting warm white of 10 Watt each lamp 230 Volt , with E27 holder type and brush bronze metal base with hammered glass complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Philips Cat Part No 58072 or equivalent of make as specified in PS.

S&F in replacement of LED Grandeur single wall light fitting warm white of 10 Watt 230 Volt , with E27 holder type and brush bronze metal base with hammered glass complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: Philips Cat Part No 58071 or equivalent of make as specified in PS.

Supply and fixing in replacement LED luminaire panel light 2' X2 ', 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply & fixing in replacement of Ceiling fan complete with blades,down rods and all connected accessories operating at 230 V with 1200/1400 mm sweep. Minimum air delivery should be 210 CFM,rated 5 star with brushless direct curent (BLDC) motor,color as per site requirement.Making arrangement for hanging fans to ceiling with proper hook,nut,bolt with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-In-Charge. Note: The old U/S 1200/1400mm sweep ceiling fan to be deposited to MES store yard in safe custody.

S& F in replacement of metallic body exhaust fan heavy duty of size 300 mm sweep with new metallic body exhaust fan 300mm AC single phase 230 V 50 HZ with blades,frame and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the exhaust fan with proper nut bolt complete all as specified and directed. Note:-The old U/S exhaust fan 300mm sweep deposited to MES store yard in safe custody.

S& F plastic body fresh air/exhaust fan of size 230 mm sweep with new plastic body fresh air/exhaust fan fan 230mm AC single phase 230 V 50 HZ with blades,frame ,louvers and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the exhaust fan with proper nut bolt complete all as specified and directed.

S& F in repair plastic body fresh air/exhaust fan of size 230 mm sweep with new plastic body fresh air/exhaust fan fan 230mm AC single phase 230 V 50 HZ with blades,frame ,louvers and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the exhaust fan with proper nut bolt complete all as specified and directed. Note: The old unsv exhaust fan to be deposited to MES store yard in safe custody.

Supply & fixing of wall fan complete with blades, Frame and all connected accessories operating at 230 V with 400 mm sweep.,color as per site requirement.Making arrangement for hanging fans to wall with proper hook,nut,bolt with twin core twisted flexible copper conductor complete all as specified and directed.

Supply & fixing in repair wall fan complete with blades, Frame and all connected accessories operating at 230 V with 400 mm sweep.,color as per site requirement.Making arrangement for hanging fans to wall with proper hook,nut,bolt with twin core twisted flexible copper conductor complete all as specified and directed. Note: The old unsv wall fan to be deposited to MES store yard in safe custody

Supply and fix in replacement of hot water storage electric water heater, steel body with copper inner tank and heating element upto 2.0 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete all as specified and directed. Note: The old U/S geyser 25 Ltr deposited to MES store yard in safe custody.

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified and directed.

S&F in replacement of MCCB 4 pole 160 Amp, 415 Volts ,36kA adjustable type including thimbles, nuts, bolts ,washers etc. and connections complete all as specified and directed.

S&F in replacement of MCCB 3 pole 100 Amp, 415 Volts ,36kA fixed type including thimbles, nuts, bolts ,washers etc. and connections complete all as specified and directed.

Tanveer Associates (BID ID -3177375)

M/S SONU ENTERPRISES (BID ID -3177558)

Parveen Builders (BID ID -3177593)