Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L2₹36.9 L+₹3.1 L (9.11%)Rejected-Finance CHOLADHARA JORAHAT 785001 ASSAM | JORHAT | ASSAM | 785001 | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹37.6 L+₹3.8 L (11.2%)Rejected-Finance A 306 SAISHA RESIDENCY PLOT NO 99 SECTOR 35 KAMOTHE RAIGAD MAHARASHTRA 410209 UDYAM MH 27 0136235 | RAIGAD | MAHARASHTRA | 410209 | L3 | Rejected-Finance BEING L3 BIDDER | |
| 4 | L4₹40.8 L+₹7.0 L (20.6%)Rejected-Finance RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | L4 | Rejected-Finance BEING L4 BIDDER | |
| 5 | L5₹42.9 L+₹9.1 L (26.9%)Rejected-Finance | L5 | Rejected-Finance BEING L5 BIDDER |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RANGIA
GE Rangia C/O 99 APO Rangia
PROVISION OF SECURITY LIGHTS AT CHANGSARI AND OTHER SANCTIONED WORKS AT RANGIA, DARRANGA, TAMULPUR AND HATTIGOR MILITARY STATION UNDER GE RANGIA
2022_MES_548327_2
8586/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
RANGIA, TAMULPUR, DARRANGA AND HATTIGOR
AS PER NIT
9 documents required · 9 mandatory
₹500
GE RANGIA
₹89,000
Yes
21 Nov 2022
18 Oct 2022
9 Nov 2022
18 Oct 2022
7 Nov 2022
26 Oct 2022
Amount
Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP–31), 9 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole with and including necessary earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 mtr, PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in the base as lean concrete and foundation upto ground level in PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) and PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) for coping of the pole including necessary form work including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all the metallic surfaces all as specified and directed by Engineer-in-Charge.
Supply and fix LED street light fitting 60 Watt 230 V AC with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP66 protection and impact resistance of IK07 complete all as specified and directed by Engineer-in-Charge.
S&F street light bracket of length 1.20 meter made of GI pipe medium grade 25 mm bore bent to shape to fixed on LT poles including MS clamps nuts bolts etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of street light thermoplastic cable junction box of size 200 x 250 x 100 mm IP 66, weather proof for outdoor installation with TPN terminal and MCB SP 6 amps suitable for cable entry upto 4 core 16/10 sqmm complete all as specified and directed by Engineer-in-Charge.
Supply, laying, testing and commissioning of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls/ floor/ trenches with fixing acessories of 16 Sqmm, 2 Core complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.
All as per serial item No.06 above but depth exceeding 1.5 m or part thereof in depth beyond the first 1.5 m in soft/loose soil complete all as specified and as directed by Engineer-in-charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge.
Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge.
M&L for sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed by Engineer-in-charge.
Supply & Laying Sub-Class B Bricks, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection, complete all as specified and as directed by Engineer-in-charge.
Supply & laying GI pipe 40 mm bore light grade for protection of UG cable, complete all as specified and as directed by Engineer-in-charge.
Supply and fix 3 core 1.5 sqmm PVC copper cable multi stranded drawn through inside pole from the bottom connector to fitting including providing necessary lugs complete all as specified and as directed by Engineer-in-charge.
Supply, installation, testing and commissioning of online UPS 20 KVA (Input : 300 V – 450 V, three phase and output : 400 V + %1 three Phase ) with following features: High frequency PWM Invertor using IGBT Mannual Bypass switch, ALPHS Numeric LCD Display with SMF, In-Built isolation transformer with 30 minutes backup with suitable size of battery and racks including FCBC (Float Cum Boost Charger) 48V-25 Amps including all specifications of FCBC as described below and as directed by Engineer-in-charge:- A. INPUT (a)Power factor 0.9 at full load (b)Efficiency 90 Typical from 50 to 100 output at nominal input voltage (c )Voltage 220V AC,Single Phase Active,Neutral Earth. (d)Frequency 40 to 65 Hz. B.OUTPUT (a)Maximum current capacity 25 Amps. (b)Allowable Voltage Rating 48 V. (c )Input AC Voltage 220 V (d)Current settings 8 steps. (e)No of bank capacity 8 Banks 48 Volts under Float mode. (f) No of banks capacity 16 Banks 24 Volts under float mode. C. ENVIORNMENTAL (a)Cooling Natural Convection cooling,Operating range 0`C TO 50`C (b)Humidity 0 to 90.4. Make - M/S Live Line Electronics / Microtek / Altech / Numeric / Vertiv (formerly Emerson)
INDICATOR DIGITAL :- (i) Power indicator (ii) Voltage indicator (iii) Frequency Meter (iv) Power Factor indicator (v) Ammeter, Temperature Meter, Digital Ammeter& Digital voltmeter. (vi)Oil level indicator Type & Suitability: Indoor Type Unbalanced Supply and Unbalance Load. (For 3 Ph. UNB Stabilizer - The unit consists of 3 nos. Single phase individually AC Servo Motor). Environment:- Ambient Temperature : Wide ambient temperature from - 20° C to 50° C.
Supply and fix Sheet metal enclosure with MCB TPN 63 Amps complete all as specified and as directed by Engineer-in-charge.
Supply, laying, testing and commissioning of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls/ floor/ trenches with fixing acessories of 16 Sqmm, 4 Core complete all as specified and directed by Engineer-in-Charge.
Supplying and laying unreinforced precast cable cover class LV type 1, flat, of size 250 x 150 x 40 mm complete all as specified and directed by Engineer-in-Charge.
Supply and fix LED street light fitting 35 Watt 230 V AC with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics having IP65 protection and Impact resistance of IK07 with 10 kV Built-in surge protection device complete all as specified and directed by Engineer-in-Charge.
Supply, laying, testing and commissioning of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls/ floor/ trenches with fixing acessories of 10 Sqmm, 4 Core complete all as specified and directed by Engineer-in-Charge.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
Supply, laying, testing and commissioning of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100Volt grade on walls/ floor/ trenches with fixing acessories of 10 Sqmm, 2 Core complete all as specified and directed by Engineer-in-Charge.
Supply and laying in trenches HDPE pipe of pressure rating 6 Kgf/cm2 for cable protection of size 25 mm bore pipe complete all as specified and directed by Engineer-in-Charge.
Dismantling and lowering down of old rusted top plate/roof sheet made out of 3.15mm thick mild sheet from pressed steel water tank on 40 feet staging carefully without making any damage to other members after necessary unscrewing bolts, nuts, etc. complete all as specified and as directed by Engineer-in-charge.
Supply, errection, hoisting and fixing of mild steel top plate/roof sheet 3.15mm thick made to required shape and drilling necessary holes for fixing of bolts & nuts and fixed on existing pressed steel water tank on 40 feet staging including necessary wire mesh jaly as required complete all as specified and as directed by Engineer-in-charge.
Refixing of serviceable top plate obtained from serial item No. 25 after properly cleaning with the help of wire brush complete all as specified and as directed by Engineer-in-charge.
Dismantling and lowering down 5 mm thick pressed steel side plates of size 1.22m x 1.22m from pressed steel water tank on 40 feet staging, carefully without damage to other members after necessary unscrewing of bolts, nuts, washers etc including separating serviceable side plates and kept in safe custody for reuse in the same work complete all as specified and as directed by Engineer-in-charge.
Dismantling and lowering down 6 mm thick pressed steel side plates of size 1.22m x 1.22m from pressed steel water tank on 40 feet staging, carefully without damage to other members after necessary unscrewing of bolts, nuts, washers etc including separating serviceable side plates and kept in safe custody for reuse in the same work complete all as specified and as directed by Engineer-in-charge.
Supply, errection, hoisting and fixing of new pressed steel side plate of 1.22mx1.22m and 5 mm thick, made to required shape and drilling necessary holes for fixing of bolts and nuts in existing pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
Supply, errection, hoisting and fixing of new pressed steel side plate of 1.22mx1.22m and 6 mm thick, made to required shape and drilling necessary holes for fixing of bolts and nuts in existing pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
Fixing only old serviceable pressed steel side plate of size 1.22mx1.22m obtained from serial item No. 28 here-in-before of 5 mm thickness with nuts, bolts and washers in existing pressed steel water tank after proper cleaning with the help of wire brush on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
Fixing only old serviceable pressed steel side plate of size 1.22mx1.22m obtained from serial item No. 29 here-in-before of 6 mm thickness with nuts, bolts and washers in existing pressed steel water tank after proper cleaning with the help of wire brush on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
M&L for fixing water level indicator comprising of CI float oval type 250 mm dia at centre, MS pulley of 150 mm dia, mild steel indicators of suitable size permanently marked stranded stainless steel rope of 10mm dia and 03 m long including connection and accessories required for smooth functioning and testing on completion including dismantling unserviceable one complete all as specified and as directed by Engineer-in-charge.
Dismantling and lowering down mild steel tie bar made out of angle iron size 65mm x 65mm x 6mm and 2.00 metre long each from pressed steel water tank on 40 feet staging without any damage to other members with necessary unscrewing of bolts, nuts and washers complete all as specified and as directed by Engineer-in-charge.
Supply, errection, hoisting and fixing mild steel tie bars made out of angle iron of size 65mmx65mmx6mm and 3.00 metre long Each and drilling necessary holes for fixing of bolts & nuts in existing pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
Fixing only serviceable tie bars obtained from serial item No 35 above duly cleaned complete all as specified and as directed by Engineer-in-charge.
Supply and fixing mild steel machine made nut and bolt 16-20 mm dia and not exceeding 5 cm long nuts and bolts with washers for fixing of steel plates, tie bars, etc. complete all as specified and as directed by Engineer-in-charge.
Supply and fixing mild steel machine made nut and bolt 11-15 mm dia and not exceeding 5 cm long nuts and bolts with washers for fixing of steel plates, tie bars, etc. complete all as specified and as directed by Engineer-in-charge.
Fixing only serviceable nuts, bolts and washers obtained from dismantled items for fixing of pressed steel plates, tie bar, roof sheets, etc. complete all as specified and as directed by Engineer-in-charge.
M&L for fixing leak proof materials comprising of lead wire, glass wool and black putty in existing pressed steel tanks to ensure water tightness after taking out old existing jointing materials by burning with blow lamps and cleaning and jointing surface complete all as specified and as directed by Engineer-in-charge.
Taking down existing unserviceable vertical pipes 100 mm bore GI pipe with all fittings (inner, outlet, washout pipes) from PS over head tank complete all as specified and as directed by Engineer-in-charge.
Suppply and fixing of medium grade GI Pipe of 100 mm dia (including all fittings) and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of painted old steel surfaces (inside surfaces of water tank) by removing all foreign particals from steel surfaces and cleaning throughly the surfaces and complete drying the surfaces and applying one coat of black bituminous paint suitable for drinking purpose in pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new steel surfaces (inside surfaces of water tank) by removing all foreign particals from steel surfaces and cleaning throughly the surfaces and complete drying the surfaces and applying two coats of black bituminous paint over a coat of primer suitable for drinking purpose in pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old painted steel surfaces of water tank (outside surfaces or replaced pressed steel sheets and tie bars and angle irons) and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new steel surfaces of water tank (out side surfaces of replaced pressed steel sheets and tie bars and angle irons) and priming with red oxide primer and applying two coats of synthetic enamel paint of existing colour complete all as specified and as directed by Engineer-in-charge.
M & L for writing the letters "PS TANK CAP 45000 Ltrs" and " SAVE WATER" on the tank having 40 feet staging with white synthetic paint on front side and "MES" on other side. size of letter shall not be less than 40 cm complete all as specified and as directed by Engineer-in-charge.
S&F cast iron sluice valve for 100 bore pipe, heavy duty, (PN-1.6), ISI mark with stainless steel/brass spindle and cast iron wheel head confirming to IS-14846 flanged both ends and including all jointing materials required viz rubber gasket 3mm thick, bots, nuts and washers including dismantling old unserviceable one complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
Technolinks
R C TRADING COMPANY
M/S NARAYAN ENTERPRISE
SHARMA ENGINEERING ENTERPRISES
M/S K D TURAIHA
M/S Rajkamal Enterprise
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .