Construction of a waiting room and meeting hall at Police Lines, Varanasi Commissionerate.

Items

CIVIL WORK Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar. (DSR 2023, SI No. 15.7.4)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below. (DSR 2023, SI No. 15.12.2)

Levelling & neatly dressing of site (site level to be 300mm up from the road level) (DSR 2023, SI No. 2.36)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.(all kinds of soil ). (DSR 2023, SI No. 2.6.1)

P&L of PCC of grade 1:3:6 (where 1 is cement, 3 is coarse sand & 6 is coarse aggregate) excluding cost of centering & shuttering. (DSR 2023, SI No. 4.1.5)

P&L in position ready mixed or site batched design mix. All works upto plinth level with Concrete of M25 grade with minimum cement content of 330 kg/cum cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer- in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (DSR 2023, SI No. 5.33.1.1)

P&F form-work for sub-structure

P&F form-work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

P&L brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in cement mortar of grade 1:4 (where 1 is cement & 4 is coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc.in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50 and for all lift.

Providing and laying in position machine batched and machine mixed mix M 25 grade cement concrete for reinforced cement concrete work using cement content as per appropriate design including pumping of concrete to site of laying but excluding the cost of centering shuttering finishing and reinforcement including admixtures in recommended proportion.

P&F form-work for super structure (DSR 2023, SI No. 5.9.6)

P&F form-work for beam / lintel / sunshade (DSR 2023, SI No. 5.9.21)

P&F form-work for slab. (DSR 2023, SI No. 5.9.20)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (DSR 2023, SI No. 5.22.6)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in. (DSR 2023, SI No. 6.4.1)

P&L 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) (DSR 2023, SI No. 13.4.1)

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 2023, SI No. 13.80)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. (DSR 2023, SI No. 13.85.3)

Wall painting with acrylic emulsion paint (upto 2 coats), having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (DSR 2023, SI No. 13.82.2)

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. (DSR 2023, SI No. 13.45.1)

P&L vitrified floor tiles of sizes 600mm x 600mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (DSR 2023, SI No. 11.41.2)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.11.41A.2 Glazed vitrified floor tiles polished finish of size, Size of the Tile 600 x 1200mm. (DSR 2023, SI No. 11.41A.2.2)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.Size of the Tile 300x300. (DSR 2023, SI No. 11.37A)

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1cement : 4 coarse sand): 25mm thick. (DSR 2023, SI No. 11.26.1)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent). (DSR 2023, SI No. 11.56.1)

P&F ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (35 mm thk. including ISI marked SS butt hinges with necessary screws) (DSR 2023, SI No. 9.20.1)

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (DSR 2023, SI No. 9.23)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250 x 10 mm. (DSR 2023, SI No. 9.74.1)

Providing and fixing bright finished brass handles with screws etc. complete: 125 mm. (DSR 2023, SI No. 9.81.1)

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (DSR 2023, SI No. 9.82)

Providing and fixing chromium plated brass 100 mm mortice latch and lock with6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR 2023, SI No. 9.88)

Providing and fixing factory made door frame (single rebate) made out of solid foam PVC extruded profile of minimum 60 mm width and minimum 30 mm thickness, having homogenous fine cellular structure and integral smooth outer skin. The frame's vertical and horizontal members to be metered cut and joined together with PVC solvent adhesive/ cement and both corners strengthened with fully threaded steel screws (of required size) fixed diagonally. The door frame is to be fixed to door jambs using 6 Nos. SS 304 grade minimum 8 mm Dia CSK Phillips stainless steel self tapping screws/fasteners with PA6 grade polyamide sleeves both of required size, and gap if any between the door frame and the jamb must be filled with clear silicon, complete as per direction of the Engineer-in-Charge. (DSR 2023, SI No. 9.123)

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2,10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note :- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). (DSR 2023, SI No. 9.147.A1.1)

P&F false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bollts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bollts of required size and other end of angle hanger fixed with intermediate G.I. channells 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.l. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceilling section and perimeter channel with the help of dry wall screws of size 3,5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with Fully Perforated Gypsum Pllaster Board of size 1200 x 2400 * 12.5mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 sides tapered and backed by acoustical tissue with NRC value not less than 0,60. (DSR 2023, SI No. 12.45.4)

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). (DSR 2023, SI No. 22.3)

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: pattern of 300x300 mm square 3 mm deep. (DSR 2023, SI No. 22.7.1)

Electrical Work. Package: (C1) Internal EI - SH:I (IEI) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed in medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C. (DSR 2022, SI No. 1.10.3)

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit,and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C. (DSR 2023, SI No. 1.55.3)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. (DSR 2022, SI No. 1.14.1)

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DSR 2022, SI No. 1.14.2)

2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire. (DSR 2022, SI No. 1.14.3)

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (for wiring of Ckt+Power+ AFAS +CCTV ). 20 mm. (DSR 2022, SI No. 1.21.1)

25 mm (DSR 2022, SI No. 1.21.2)

32 mm (DSR 2022, SI No. 1.21.3)

Supplying and fixing Two module stepped type electronic fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (DSR 2022, SI No. 1.25)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (DSR 2022, SI No. 1.26)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (DSR 2022, SI No. 1.31)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (DSR 2022, SI No. 1.32)

Supplying and fixing 2 nos 3 pin 5/6 amps modular socket outlet , 1 No. 15/16 amps modular switch & 2 No. blanking Plate on the modular plate & switch box including connections With modular plate etc. as required. (computer point) (DSR 2022, SI No. 1.24)

Supply, Installation testing & commissioning of 20 W Surface mounting type LED Luminaire capable to deliver min 2000 lumens outout, IP 20 protection ,colour temperature minimum 4000 - 4500 K having efficacy not less than 100 lm/W,rated life of L 70 @ 50000 hours, CRI ≥ 80 ,THD ≤10%, CRCA powder coated housing , inbuilt electronic driver , minimum SPD 2.5 KV including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. as required. BRAND-PHILLIPS - FULL GLOW METAL SURFACE (MR)

Supply, Installation testing & commissioning of wall mounting type 10 W LED Luminaire, IP 20 ,colour temperature 5500 - 6500 K having efficacy not less than 100 lm/W,rated life of L 70 @ 50000 hours, CRI ≥ 80 ,THD ≤ 10%, CRCA / aluminium body, inbuilt electronic driver, including wiring with1.5 sq.mm FRLS PVC copper wire along with white pvc sieeve , clips, & loop earthing etc. as required. (mirror light in toilets) BRAND-PHILLIPS CHROME MODEL - 48043 (MR)

Supplying installation testing & commissioning of 15 W Surface / recess mounting type LED Down lighter Luminaire, IP 20 , Mechanical Protection of IK 02, colour temperature 5500-6500 K having efficacy not less than 100 lm/W,CR ≥ 80 ,Surge Protection of 2.5 kV , aluminum diecast housing, inbuilt electronic driver, including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. as required. BRAND-PHILLIPS - FULL GLOW METAL SURFACE (MR)

Supplying, installation, testing and commissioning of 300 mm sweep medium duty exhaust fan suitable for to operate on 230 V single phase AC supply in the existing opening i/c making fixing arrangment / making the opening to suit the size of the exhaust fan and connection with 3 core 1.5 sq. mm FRLS PVC insulated copper conductor single core cable as required. (PSR)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply,earthing etc. complete as required. (DSR 2022, SI No. 19.1)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 25A modular socket outlet and 25A modular SP MCB "C" curve including connections,painting etc. as required. (MR)

SH:II ( MCB & DB'S) Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door. (DSR 2022, SI No. 2.4.1)

6 way(4 + 18), Double door. (DSR 2022, SI No. 2.4.2)

8 way (4 +24), Double door (DSR 2022, SI No. 2.4.3)

Supplying and fixing 5 A to 32 A rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole (DSR 2022, SI No. 2.10.1)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, Residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 Amps (DSR 2022, SI No. 2.14.1)

40 Amps (DSR 2022, SI No. 2.14.2)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, MCB, in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 Amps (PSR)

63 Amps (DSR 2022, SI No. 2.13.2)

TERMINATION Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 4 x 10 sqmm (25 mm) (DSR 2022, SI No. 9.1.32)

4 x 16 sqmm (DSR 2022, SI No. 9.1.33)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 x 50 Sq mm (Alu) (DSR 2022, SI No. 9.1.22)

3.5 x 25 Sq mm (Alu) (DSR 2022, SI No. 9.1.20)

MV Cabling, Cable Tray Supplying and Laying of XLPE insulated, PVC sheathed aluminium conductor 1.1 KV grade armoured U.G.Cable of following sizes on surface/in existing cable tray/in existing pipe/ in surface/recess etc. as required. 3.5 c x 50 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cable (MR)

3.5 c x 25 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cable (MR)

4 c x16 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed copper conductor cable. (PSR)

4 c x 10 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed copper conductor cable. (MR)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with M.S. suspenders including bolts& nuts, painting suspenders etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness (DSR 2022, SI No. 1.10.3)

CCTV, Networking Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel/ PVC conduit as required.1 run of cable (Note: for data, CCTV) 1 run of cable. (DSR 2022, SI No. 1.53.1)

RJ-45 Socket (MR)

Supply, Installation, Testing & Commissioning of WALL mounted 600mm x 800mm size 4U network rack , with accessories, 150/150 Vertical cable manager double sided, Mounting Hardware 5/15Amp PDU , ventilation fan and standard accessories etc as required (MR)

24+2 Port 10/100/1000 Switch : 8*10/100/1000mbps POE port; 4*10/100/1000mbps (MR)

Supplying, Installation, Testing and Commissioning of 19 inch 1U Patch Panel for 8 x RJ45 connection module , zig-zag IO placement for better alien cross talk The information Outlet should establishing of transmission channels of class E with up to 4 plugged connections, complies with Category 6 requirements of the standards ISO/IEC 11801 ed. EN 50173-1, 24 Nos. I/O must be loaded from day one in each Patch panel etc complete as required. (MR)

Supply, Installation, Testing & Commissioning of UTP Cat 6 Patch cord. Should confirm or exceed the EIA/TIA 568 C.2-1 standards for CAT 6, 26 AWG Factory molded slim white boots on RJ 45 plugs at both ends, Option for colour – Grey, Blue, Red & Green & cross over cable. Patch cord material should be LSZH and IDC based technology. Patch cord should have provision to mount external color codes and additional physical patch lock & key mechanism to avoid loose connection situations. 1 Mtr. (MR)

2 Mtr (MR)

CCTV System SITC of 2MP Dome camera with 1/2.8-inch CMOS, Effective pixels 1920 (H) x 1080 (V), 30fps, Sensitivity (Measured according to IEC 62676 (1/30, F1.6 or F2.2) - 0.08 lx (color), 0.020 lx (mono), 100 dB Wide Dynamic range, Electronic Day/Night, Automatic Electronic Shutter (AES), H.265, H.264, M-JPEG Video compression, edge anylatics Object detection, object cross line,Simple motion detection and tamper detection, White balance, Backlight Compensation, Privacy Mask, Motion detection, POE IEEE 802.3af / 12VDC , 2.8 mm fixed lens, Built-in mic, MicroSD card slot for edge recording, Motion, tamper and audio detection, FTP, Dropbox and e- mail applications, IP42, IK08, 30m IR range or better , ONVIF Profile S, G & T, PoE, CE, FCC, UL certified.Sd card support up to 1 TB , i/c termination of RJ connector, mounting boxes etc. complete as required. (MR)

Supplying , installation , testing and commissioning of LED 55" UHD TV, Display Type - LED Display smart TV , Web OS, Active HDR LED Resolution, 2 channel 20WAudio Stereo System, in Built wifi, Bluetooth surround ready, HDMI port, Hear Crisp and Clear Sound, including stands, bracket, mounting arrangement etc. complete as required (MR)

Supplying , installation , testing and commissioning network recorder to a maximum of 32 IP cameras,The recorders can be installed with a maximum of 4 internal HDDs for video storage. Option of a 2 HDDs for storage, Max. capacity per HDD: 6 TB WITH RAID 5 . 1 no. E-SATA supported. . 16 alarm i/p & 6 relay o/p. Simultaneous 1/4/9/16 channels playback. H.265 / H.264 / MJPEG supported. iPhone/Android support. Maximum incoming bandwidth of 320 Mbps. Maximum recording bandwidth of 320 Mbps. 1 I/O for audio. 1 VGA & 2 HDMI outputs. CE, UL & FCC certified. including providing 02 nos 6TB CCTV HDD Specialy designed for 24*7 for 30 Days etc complete as required. MATRIX (MR)

PA System Supplying, installation, testing & commissioning of ceiling / wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required. (DSR 2022, SI No. 17.3.4)

Supply and installation of Media player, mixer amplifier with Bluetooth. Supplied with remote control. On board tuner and MP3 player. Inputs: Front panel mic. input with priority function, rear panel balanced mic. input with phantom power. Emergency input function. Dual RCA line inputs. Outputs: RCA aux out. 250W at 70/100V and 4-16 Ohms. 24V backup power input including prewired internal wiring, multiple extention 6A socket outlet, suitable nos. of exhaust fans complete, compatible with fire panel . (MR)

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Single pair, 2-core, 1.5 sqmm. (DSR 2022, SI No. 17.5.3.1)

Telephone Supply Installation, testing & commissioning 1 Nos telephone point RJ 11 with Back Box & Cover plate colour as required including termination & labling FOR Voice point (TABLE TOP) (MR)

Supplying of ISO Certified company made Krone module with base frame for electrical Works, in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted., including dressing, ferruling and punching of telephone cable with krone tool etc. as required. All as per pre approved by Engineer in charge. 10 Pairs (MR)

Supplying and laying of 10 pair telephone wire (MR)

Supplying and laying of 2 pair telephone wire (MR)

SH:III (EARTHING) Earthing with G.I. earth pipe 4.5 metre long, 50 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR 2022, SI No. 5.2)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. (DSR 2022, SI No. 5.11)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (DSR 2022, SI No. 5.15)

Street Light Supply and erection of M S swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate in position including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be fabricated by using ISI mark tube for structural purpose of following height & designation. 8.5 M (MR)

Provide & Fixing of IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with Heat dissipation fins on housing with High Power LEDs of CREE / NICHIA / OSRAM / PHILIPS make. DIffuser / Glass cover for ensuring IP65 protection for Lamp & control gear compartment, System Lumen output of 1500 - 8500 High Power LED. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards System life of 25,000 Burning Hours with 70% of initial Lumens maintained. Fixture shall be in CE Compliance. (MR)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 X 6.0 sq. mm al. arm (For Street Light ) (MR)

Termination Boxes (MR)

2P MCB 16A (MR)

SH-I (Fire Alarm) Supplying, installation, testing & commissioning of addressable manual call point complete as required. (DSR 2022, SI No. 17.2.14)

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. (DSR 2022, SI No. 17.2.15 )

Supplying and Laying of 2x1.5 sqmm. Fire alarm armoured cable 600/1000v rated with annealed copper conductor having XLPE insulation,steel wiring armouring & FRLS outer sheath complete as required. (DSR 2022, SI No. 17.5.2)

Main Panal SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:- (a)Thickness of CRCA sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided. (b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel. The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire. [c) Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only. All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar / Flexible wire for Interconnection between Main busbar and Switchgear is to be Paid Extra ) (d)Wiring between components within switchgear and Incoming / outgoing cable shall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. (e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging. (f)Floor mounted panel shall be mounted on Base frame of ISMC channel size 100 x 50 x 5 mm ( to be paid Extra ) (g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out. (h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in charge. Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulator with standard short circuit withstand capacity , high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. MCCB 1 Nos.100A 18kA,Aux.contect Nos.100A,LED Indication R,Y,B,ON,OFF,TRIP. MCB 63A FP 10 Ka 4 NOS., MCB 40A FP 10 Ka 2 NOS. BUS BAR (MR)

Construction of brick masonry inspection chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in 1:4, over CC 1:4:8 bed 150 mm thick including providing precast RCC top slab in 1:2:4 Mix (1 cement: 2 Coarse sand: 8 graded stone aggregate), with angle iron frame, inside plastering 15mm thick with CM 1:3 (1 cement::3 fine sand) finished very smooth with floating coat of neat cement & making benching and channelling in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate) neatly finished complete as per standard design and as per drawing and specifications. (The rate shall include necessary earth work excavation in all types of soil excluding soft and hard rock, back filling including consolidation disposing the excess earth to all leads curing, finishing etc., and back filling and completion) 600mm (L)X600 mm (W)X600 mm(D) For Electrical Cables (MR)

450mm (L)X450 mm (W)X450 mm(D) For LV Cables (MR)

Provide & Fixing rigid PVC Pipe (IS:4985 mark) class II/ (2.5 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 200 mm dia. (MR)

160 mm dia (MR)

Sanitary Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (DSR 2023, SI No. 17.78)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (DSR 2023, SI No. 17.7.1)

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern ,with fittings,standard size C.P.brass flush pipe,spreaders with unions and clamps (all in C.P. brass)with wste fitting as per IS:2556,C.I. trap with outlet granting and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls wherever require: single half stall urinal with 5 litre P.V.C. automatic flushing cistern. (DSR 2023, SI No. 17.5.1)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board, 610x510 mm bowl depth 200 mm. (DSR 2023, SI No. 17.10.2.1)

Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms (DSR 2023, SI No. 17.70.2)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm (DSR 2023, SI No. 17.32.4)

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (DSR 2023, SI No. 17.69.1)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR 2023, SI No. 17.71)

Providing and fixing toilet paper holder : C.P. brass (DSR 2023, SI No. 17.34.1)

P & F Health Faucet with 1.0 meter long flexible pipe for water closet with C.P. Copper Tube flange of approved make. (MR)

Water Supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes (DSR 2023, SI No. 18.7.2)

25 mm nominal dia Pipes (DSR 2023, SI No. 18.7.3)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External Work . 32 mm nominal dia Pipes. (DSR 2023, SI No. 18.9.4)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (In Shaft & Terrace Floor ) (DSR 2023, SI No. 18.18.3)

Drainage Providing & fixing PVC pipe confirm to IS -4985 and suitable for 6 kg/sqcm. This shall include connection from fixtures to all fittings conforming to IS:7834, supports from wall/ceiling, clamps & hangers cutting & making good the walls & floor where ever required. Jointing shall be done complete with PVC solvent cement. Including 1:2:4 concrete all round the pipe with bedding. Making, cutting & chasing in walls / floor, upto 63 mm dia waste pipes & fittings. Making good the same by using 1:1 Cement mortar. 110 mm OD (MR)

160 mm OD (MR)

Providing & Fixing of PVC injection moulded SWR floor trap inline with top tile & strainer having 50 mm water seal as per IS : 14735, including cost of PVC SWR height raiser to be fixed over floor trap with one inlet of 110 mm. Including cutting & making good the walls & floors. The jointing shall be done with complete with PVC solvent cement. 110 mm inlet & 110 mm outlet (MR)

Providing and fixing clean out cap plug (FCO ) for cleaning of same material composition as per item no. 1 above ( 100 mm dia) (MR)

Providing, fixing, testing & commissioning of uPVC inlet fitting with maximum 3 inlets 40, 50 & 75 OD size, fixed to uPVC traps including jointing complete with all civil work. (MR)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :(Civil Dsr vol-1) All Kind of Soil. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. (DSR 2023, SI No. 2.10.1.2)

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 2023, SI No. 19.4.2.1)

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. (DSR 2023, SI No. 19.30.1.1)

Inside dimensions 500x700 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. (DSR 2023, SI No. 19.30.1.2)

Fire Fightin - PUMP (A) Supplying,installation,testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Terrace Pump). (B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming toIS:1520. (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts,3 phase 50Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. (D) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibrationpads. 450 lpm at 35 m Head. (DSR 2022, SI No. 18.4.2)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 150 mm dia. (DSR 2022, SI No. 18.7.8)

Supplying and fixing single headed internal hydrant valve with Instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type A) with blank gun metals/stainless steel cap and chain as required : Single handed stainless steel. (DSR 2022, SI No. 18.9.2)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required: 100 mm dia. (DSR 2022, SI No. 18.11.5)

150 mm dia (DSR 2022, SI No. 18.11.6)

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required: 150 mm dia (DSR 2022, SI No. 18.14.7)

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 150 mm dia. (DSR 2022, SI No. 18.15.3)

Supplying and fixing 63 mm m long RRL hose pipe with 63 mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required: Stainless Steel (Grade 304) (DSR 2022, SI No. 18.16.2)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585(20 mm) nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 M (DSR 2022, SI No. 18.17.1)

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304) (DSR 2022, SI No. 18.18.2)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 2 way-100 mm dia M.S. Pipe. (DSR 2022, SI No. 18.19.1)

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shades as required : (DSR 2022, SI No. 18.20)

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (DSR 2022, SI No. 18.22)

PORTABLE FIRE EXTINGUISHERS Supplying & fixing of CO2 type fire extinguisher, 4.5 KG capacity (ISI marked IS:2878 & TAC approved) complete with internal chrge and wall bracket, along with supply of all materials and labour for proper completion of work. (UPPWD SOR 2018 / 1132)

Supplying & fixing of ABC type 6.0Kg capacity (ISI marked IS: 15683 & TAC approved) complete with internal chrge and wall bracket, along with supply of all materials and labour for proper completion of work. (UPPWD SOR 2018 / 1131A)

Supplying & fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, innitially filled with fine river sand, water as per directions of Engineer-in-Charge. (UPPWD SOR 2018 / 1133)

Insatllation and making of Signages as per design of Architect. Size 12x8 Inch (MR)

Insatllation and making of Signages as per design of Architect. Size 6x6 Inch (MR)

Please Enable Macros to View BoQ information