Construction of temporary shed for power house at Kiltan

Amount

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providiing and laying in position cement concrete of specififed grade excluding the cost of centering and shuttering All work up to plinth level 1:4:8(1Cement 4Corse sand(Zone -III) 8Grade stone aggregate 40mm nominal size)

Providing and laying cement concrete 1:5:10 (1 cement 5 coarse sand 10 graded stone aggregate 40mm nominal size) excluding the cost of centring and shuttering and reinforcement for foundation and plinth

Providing and laying factory made Precast concrete solid blocks size of 40x20x15 cm of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand

Providing and laying factory made Precast concrete solid blocks of size 40x20x15 cm of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level Cement mortar 1:6 (1 cement : 6 coarse sand)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing M.S.grills of required pattern in frames of windows , doors etc.with M.S.Flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required0.80mm thick with zinc coating not less than 275gm/m2

12mm cement plaster 1:6 (1 cement 6 M. sand) Out side

15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

SAJITHA.MN

MOHAMMED RIHAN

muhammed sahal kn