Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-AOC BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L1 | Accepted-AOC Due to lowest bidder | |
| 2 | L2₹42.8 L+₹1.3 L (3.05%)Rejected-Finance WARD NO 02 LAKHUWALI PO THE PILIBANGAN DISTT HANUMANGARH RAJASTHAN 335803 | HANUMANGARH | RAJASTHAN | 335803 | L2 | Rejected-Finance Due to not lowest bidder | |
| 3 | L3₹46.6 L+₹5.0 L (12.0%)Rejected-Finance NEW ABADI KISHANPURA SURATGARH 335804 DISTT SRIGANGANGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L3 | Rejected-Finance Due to not lowest bidder | |
| 4 | L4₹47.8 L+₹6.2 L (15.0%)Rejected-Finance WARD NO 26 OLD 36 NEW NEAR FIRE BRIGADE OFFICE RCP TAL COLONY ROAD SURATGARH 335804 SRI GANGANAGAR RAJ | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | L4 | Rejected-Finance Due to not lowest bidder |
Tender Value
₹49.4 L
EMD Value
₹98,820
Closing Date
13 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) BIKANER
GE (N) BIKANER RAJASTHAN
SPL REPAIR TO CERTAIN BLDGS AND PROVN OF TOILETS SENTRY POST NORTH CAMP AT VARIOUS LOCATIONS AT MFFR UNDER GE N BIKANER
2023_MES_618986_1
GE (N) BKN-TOKEN/59/2023-24
Open Tender
Miscellaneous Works
Item Rate
270 days
MFFR Mahajan
As per Tender Documents
6 documents required · 6 mandatory
₹500
GE (N) BIKANER
₹98,820
Yes
13 Jan 2024
15 Sept 2023
21 Oct 2023
15 Sept 2023
13 Oct 2023
30 Sept 2023
Amount
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge complete all as specified and as directed by Engr-In-Charge.
Dismantling structural steel work including doors, gates but excluding framed truss complete all as specified and as directed by Engr-In-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips including providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick/stone masonry built in CM. complete all as specified and as directed by Engr-In-Charge.
Dismantling Wall and ceiling boards or insulation boards with Frame Of Mild Steel , any thickness,any description, including cover fillets complete all as specified and as directed by Engr-In-Charge.
Taking up or down steel tubing 15 mm bore with connections for cleaning for refixing or removing to complete all as specified and as directed by Engr-In-Charge.
Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to complete all as specified and as directed by Engr-In-Charge.
Dismantling100mm cast iron /PVC pipes fixed to walls or laid in trenches in any position complete all as specified and as directed by Engr-In-Charge.
Dismantling water tanks and removing to store exc 500 and nexc 1000 ltrs complete all as specified and as directed by Engr-In-Charge.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etcor notexceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes,, etc and getting out in loose/soft soil complete all as specified and as directed by Engr-In-Charge.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each layer complete all as specified and as directed by Engr-In-Charge.
Removing excavated soil not exceedind 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engr-In-Charge.
M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including base of manholes complete all as specified and as directed by Engr-In-Charge.
M&L for Brick work with fly ash bricks old size straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-In-Charge.
M&L non skid ceramic tiles 7 to 8 mm thik (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-In-Charge.
M&LVirified Ceramic tiles light shade 10 mm thicks (square/rectangular) area of each tile exceeding 0.42sqm but not exceeding 1 sqm, in floors on 15mm thick screeding in CM 1:6 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-In-Charge.
M&L for Glazed ceramic coloured tiles in vertical surface 300x 200x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on 10mm thick screeding in CM 1:4 complete all as specified and as directed by Engr-In-Charge.
M & L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in CM 1:3 complete all as specified and as directed by Engr-In-Charge.
M&L 100mm thick for PCC 1:2:4 type B-0 (12.50mm graded stone aggregate) for roof covering complete all as specified and as directed by Engr-In-Charge.
M&L for PCC 1:3:6 type B-1 using 20mm graded aggregate as in bed blocks of hold fasts complete all as specified and as directed by Engr-In-Charge.
M&L for 15mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed by Engr-In-Charge.
M&L for 15mm thick Rendering in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed by Engr-In-Charge.
M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of oil Bound Distemper white or tinted over a coat of white wash complete.
M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over a coat of white wash complete.
M&L for Preparing old plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over a coat of white wash complete.
M&L for Preparing old plastered or unplastered surfaces of walls and applying two coats of oil Bound Distemper white or tinted over 3 mm coat of birla white putty a coat of white wash complete.
M&L for 5 mm thick Rendering in cement mortar 1: 3 on fair faces of ceiling wall concrete surfaces, finished fair and even without using extra cement complete.
M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats ceiling surface of white wash or tinted over a coat of primer complete.
M&L for Preparing old surfaceplastered or unplastered surfaces of walls and applying two coats ceiling surface of white wash or tinted over a coat of primer complete.
Material & Labour for complete removal a of existing treatement by sanding machine applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engr-In-Charge.
M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone agregate as sub base of floors complete all as specified and as directed by Engr-In-Charge.
M&L Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortor 1:6 n.exc 3 m in length complete all as specified and as directed by Engineer-in-Charge.
S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the steel frame at site as per specification.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engr-In-Charge.
Supply only liquid water proofing compound complete all as specified and as directed by Engr-In-Charge.
S&F 3mm sheet glass, ordinary quality and glazing with oil putty in squre n exc 0.5sqm in each pane but forsted complete all as specified and as directed by Engr-In-Charge.
Providing cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in cills, bed block, copings,bed plates, bond stone, etc including weathering, slightiy rounded or chamfered angles and throating as directed including necessary form work complete.
M&L for preparation new or previous untreated steel & iron surfaces of any description over 10cm in with or grith and applying two coats of synthetic enamel paid over & including a coat of red oxide primer complete.
M&L 5cm thick sand stone slabs in shelves, chajjas, shelves etc n exc 2m in length set and pinted in CM 1:4 complete all as specified and as directed by Engr-In-Charge.
S&F Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, and including waste Pipe and waste Coupling complete.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.
S&F PVC (SWR) pipes, single socketed,in any length with rubber ring joints, fixed to walls, 75mm bore complete.
S&F PVC (SWR) bends any radius, 110mm bore complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) couplers, 110mm bore complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm in CM 1:4 mortar complete.
M&L for 15mm bore steel water tubes, medium grade. ISI marked, galvanised with all fittings, fixed to walls and ceilling or laid in floors complete.
M&L for 20mm bore steel water tubes, medium grade. ISI marked, galvanised with all fittings, fixed to walls and ceilling or laid in floors complete.
S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and as directed by Engr-In-Charge.
S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and as directed by Engr-In-Charge.
S&F Bib taps cast copper alloy Chromium Plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and as directed by Engr-In-Charge.
S&F pillar tapes, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete.
S&F angle valve cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete.
S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.
S&F in repairs Vitreous China wash down water closet pan, pedestal pattern, coloured, fixed in repairs including PVC seat cover black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixing bolts and making connections to flushing cistern complete
S&F Vitreous china squatting pan of orissa pattern, white of size 580x440mm with integral foot rest and P or S trap in cluding provision of lime concrete bedding min 150mm thick (1:2:5) inc taking out old WC complete all as specified and as directed by Engr-In-Charge.
S&F Health Faucet with stand kob and 1 mtr long flexibele pipe with connection to EWC complete all as specified and as directed by Engr-In-Charge.
S&F waste fittings 32 mm bore, brass, chromium plate for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete.
Soakage wells exc, in any type of Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, with stone patti cover in Masonry/ Filling with brick bats complete of size 1.2 M dia X 3.0 M deep complete all as specified and as directed by Engr-In-Charge.
S&F Tower Rail 600 mm long of Stainless Steel fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed by Engr-In-Charge.
S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (Minimum weight 210 gms) complete all as specified and as directed by Engr-In-Charge.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engr-In-Charge.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and as directed by Engr-In-Charge.
S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed by Engr-In-Charge.
S&F Aluminium alloy, anodised, sliding door bolt 250 mm long, with haps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-In-Charge.
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and as directed by Engr-In-Charge.
S&F Extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete all as specified and as directed by Engr-In-Charge.
M&L for Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in packing under and hunching against the sides of pipes, without bedding layer, after they are laid and tested in 150 mm dia of pipe complete all as specified
S&F Salt glazed stone were drain pipes, grade ‘A’ 150 mm bore (internal dia) laid in trenches over existing concrete bedding and jointed complete all as specified and as directed by Engr-In-Charge.
Cutting into existing manholes or connecting new, drains making good existing benching or forming channel and reforming benching with cement and sand mortar 1:4 or PCC 1:2:4 type B-1 smooth finished and reforming benching as in 150 mm dia of pipe complete all as specified and as directed by Engineer-in-Charge
M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, , finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.
Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete (reinforcement to be measured separately)
M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.
M&L 18-20 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L 18-20 mm thick machine cut kota stone slab as in skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate of profile 125x60mm complete all as specified and as directed by Engr-In-Charge.
MS work as in hold hast complete all as specified and as directed by Engr-In-Charge.
S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate of profile 105x60mm complete all as specified and as directed by Engr-In-Charge.
S&F 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers complete all as specified and as directed by Engr-In-Charge.
S&F 2nd class hard wood 35mm thick Plain, framed, Glazed shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers complete all as specified and as directed by Engr-In-Charge.
M&L for painting to new wooden surface over 10cm width or girth with two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-In-Charge.
S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. With glazing bar dovtailed or welded including one shop coat of primer complete all as specified and as directed by Engr-In-Charge.
S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. Without glazing bar dovtailed or welded including one shop coat of primer complete all as specified and as directed by Engr-In-Charge.
MS work as in framed work such as grills, gratting, guard bars, etc confirming to Fe-410-0 complete all as specified and as directed by Engr-In-Charge.
S&F 3mm thick Sheet glass , ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engr-In-Charge.
S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engr-In-Charge.
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St-240, conforming to Fe- 290 Gde E-165 complete as directed by Engineer-in-Charge and all as specified.
Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 Gde E-165 all as specified and as directed by Engineer-in-Charge.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5 cm and dia of shank 5 to 10 mm complete all as specified and as directed by Engineer-in-Charge.
M&L for framed worked as in doors or gates of angle or other section with gusset angle chowkhat , plates,rails braces, staging of tank, etc. incl all necessary drilling,welding,bolting or riveting etc. complete and door for hanging and fastening and fixing complete Fr-290 (Gde-165) comp. all as specified .
S & F Pre-painted galvatume ( Sand Colour ) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of sand colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-In-Charge.
S & F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of sand colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as complete all as specified and as directed by Engr-In-Charge.
Supply and fixing anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of mild steel anodised coating main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with mild steel anodiised coating angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with mild steel anodiised coating angle of size 35 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 6 mm thick cement fiber board fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc complete all as specified and as directed by Engineer-in-Charge.Make of mineral fibre Board : Everst board .
S& F Harrison rails,mild steel,curtain rod chromium plated with fixing brackets, stops, rollers complete all as specified and as directed by Engr-In-Charge.
M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-In-Charge.
Anodised aluminium Shutter for doors, windows, ventilators with including frame one or more rebates including joining cleat, Deko Grill , Partitions etc for fixing etc. complete all as specified
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including waste pipe 32 mm bore flexible complete all as specified and as directed by Engr-In-Charge.
S& F Turbo Air Ventilators Made size 24''x32'' SS Top vent made from 0.5 mm Aluminum Alloy blade bottom made from SS (0.5 mm thick ) with bearing cylindrical assembly manufactrured from MS Seamless pipe with zinc coating With fitted on FRP doom for mounted thicknes 1.5 mm sheet fixing in Existing Corrugated sheet to align with existing roofing to ensure leakge free operation without any structurel change
Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge.
M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns (WPC to be measured separately as supply only)
Applying a priming coat of bitumen primer @ 0.70 ltr/sqm complete all as specified and as directed by Engineer-in-Charge
Preparing surface and cleaning of concrete slab by wire brushing and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per sq m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge
M&L for 150 micron polyethylene sheet supplied and fixed complete all as specified and as directed by Engineer-in-Charge
M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge. NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.
M&L 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with weight of cement complete all as specified and as directed by Engineer-in-Charge.
Ditto as item No 108 above but except tiles
Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store complete.
Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc complete all as specified and as directed by the Engr-in-Charge.
Taking down of unserviceable DBs/switch fuses/changeover in sheet steel enclosure complete with MCBs/Fuse/grips any capacity and removing from site and making good disturbed surface of wall, floor etc. Taking after disconnecting all cable complete all as specified and as directed by the Engr-in-Charge.
Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including new sunken box covered with and including 3 mm thick bakelite laminated sheet top cover of approved make for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.
All as per item No 113 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge
All as per item No 113 here-in-before but socket point on indpendent board complete as specifed as directed by Engineer - In - Charge
All as per item No 113 here-in-before but cable 2.5 Sqmm for 15 Amps switch socket outlet on independent board complete as specifed as directed by Engineer - In - Charge
S&F Switch piano flush type, Single pole 5 Amps, one way ISI marked, complete all as specified and as directed by Engineer-in-Charge
S&F Socket outlet 2 in 1, flush type, 3 pin, 5 Amps, ISI marked, complete all as specified and as directed by Engineer-in-Charge.
S&F Lamp holder insulated body with back plate for conduit/casing capping fittings complete all as specified and as directed by Engineer-in-Charge Make CG/Havells/Phillips.
S&F Ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge.
Supply & fix LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge.
S&F switch socket combination 5 in 1, 5/16 amp flush type fixed on laminated sheet top cover (laminated sheet top cover is including in point wiring).
S&F in replacement Fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.
S&F Decorative ultra slim linear LED lightening fixture, energy efficent 18 Watt complete all as specified and directed by engineer-in-charge.
S&F in replacement Recessed mounting LED 2x2 luminaire type :- make: CG / Phillips / GE / Wipro / Havell's/Bajaj
Sheet metal enclosure for distribution boards, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 8 ways double door , supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge.
S&F MCB suitable for 6 to 32 Amps, 240 Volt AC supply single pole and neutral with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCB single pole, 240 volts of rating 6-32 Amps, breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge
Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 2 core complete all as specified and as directed by Engineer-in-Charge
Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 mtr in depth for route of cable and getting out complete all as specified and as directed by the Engr-in-charge.
Returning, filling in soft/loose soil including spreading, leveling watering and well ramming, in layers not exc 25 cm complete all as specified and as directed by the Engr-in-charge.
Removing of surplus soil to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.
Protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class 'B' bricks complete all as specified and directed by Engr-in-charge.
Local tibba dry sand cushioning for protection of cable complete all as specified and as directed by Engineer-in-charge. Note Local approved tibba dry sand after removal of vegetations, grass and other deleterious substances shall be used for sand cushioning complete all as specified and as directed by Engineer-in-Charge
M & L GI tubing light grade for protection of cables with pole/ in ground of size 40mm dia complete all as specified and as directed by Engineer-in-Charge.
M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I.
Taking down Exhaust/fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed by Engineer-in-Charge.
Hanging only ceiling Exhaus/fan taking down vide item ser no 27 and connecting up with provn of 3 core of flexible cable of size 1.5 sqmm after complete rewinding ,over hauling, minor repair as required,painting and to make serviceable with replacement of bearing/ capacitor etc. complete all as specified and as directed by Engr-in-charge.
Gill Construction Co
M/s JUGAL KISHORE MISHRA AND SONS
M/s Shubham Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .