PROVN OF CHAIN LINK FENCING UNDER ZONE-I, PROVN OF 02 X WATER STORAGE CHERRY, SPL REPAIR TO TOILET AND STORE OF BLDG NO P-575 WITH MISC WORKS AT JAIPUR MIL STN

Amount

Taking down cement plaster or cement lime plaster on brick / stone surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified.

,---ditto--- all as per srl item No 3 above but except bricks complete all as specified.

M & L Brick work with sub-class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L brickwork with sub class B brick straight or curved on plan exc 6m means radius built in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M & L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement.

M & L for preparation of new plastered or unplastered wall surfaces and applying two coats of cement base paint on wall

M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer complete all as specified and directed. (Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.)

M & L for preparation of old surface of walls and applying two coat of cement paint of any tint all as directed.

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified and as directed by Engineer-in-Charge.

M&L for including sand paper gentle rubbing to obtain smooth surfaces and applying two coats of oil bound distempering white or tinted using hand roller/brush on Wall Surface including all necessary arrangement for execution of work ,complete all as specified and as directed by Engineer-in-Charge.

M & L for preparation of old plastered or unplastered decorated surfaces and applying two coat of white wash on ceiling

Dismantling of cement concrete tiles,glazed tiles, terrazo tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish outside MD land complete all as specified and directed.

M&L Non- skid joint free coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. with coloured cement to match the shade of tile laid over & incl 15 mm screed thick in CM 1:6 complete all as specified and directed.

M&L coloured Glazed ceramic tiles (300x450 x 7mm thick), in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed .

M&L Non- skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. using approved chemical adhessive coloured cement to match the shade of tile complete all as specified and directed.Note (Adhessive shall be measured & paid seperately)

M&L coloured non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed in C:M (1:6) complete

M&L for granite (of any type), 16mm to 18mm work (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M & L machine cut kota stone slab flooring 20-25mm thick,size of kota stone 450x450 mm over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M & L machine cut kota stone slab flooring 20-25mm thick,size of kota stone 1200mm*600 in single piecesmm over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F rolled mild steel work as in Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the lenght directed) and similar work conforming to Fe-290 GdeE-165.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete

S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming toIS 1161-1979 graded St-240

M&L preparation of new steel surface of any description n. exc 10cm in width or girth when un connecting to other painting surface and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified

M&L for preparation of newly steel surface of any description n exc 10cm in width and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all specfied and directed.

M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering

M&L for prearation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified

M&L plain cement concrete type B1 1:2:4 ( 20mm graded aggregate) as in lintels, cills steps, seismic and other similar bands , copings, kneelers, apex stone bed plates , kerb ,water troughs and like including weathering, slightly rounded or chamfered angles and throating as directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar

M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in base.

M&L Sand filling under floor, spreading and levelling in layers 25 mm thick .

M&L 60 mm thick PCC intrelocking tiles rubber moulded precast concrete with grey cement & no pigment conforming to IS 15658-2006 with M-35 Grade any shape and size as directed by Engineer In-charge

M&L 60 mm thick PCC intrelocking tiles rubber moulded with colour pigment precast concrete conforming to IS 15658-2006 with M-35 Grade any shape and size as directed by Engineer In-charge

M&L Precast PCC type D-1, (1:3:6) using 20mm graded stone aggregate as in Curve stone etc.

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary.

,---ditto--- all as per srl item No 39 above but without glazing bar

S & F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples

S /Or 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane.

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame complete all as specified and directed.

Taking down resecuring or easying and refixing in same opening of old door shutters of any description exc 1 Sqm but n exc 2 Sqm in size.

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 300mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate

S & F 150mm long mild steel pressed handles oval type stove enamelled black complete

S & F 125mm long aluminium handles, cast type anodised complete

S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete

S & F 125mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete

Dismantling old unserviceable RCC / PVC water tank & removal from site complete all as directed capacity exceedind 250 ltr and not exc 500 ltrs

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I, Make - Sintex or eqivalent

S & F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms). Make- Prayag or equivalent

S&F vitreous China white single piece WC (European type) incl inbuilt vitreous china cistern size 360X640X680mm strap 220 all as specified and directed . Cat No :SLS6853-S Make : Jaquar or equivalent

S&F in repair vitreous china wash basin , white flat back size 550X400 mm including brackets , 32 mm dia waste coupling of PTMT (min weight 450 gms) 25mm dia PVC waste pipe 75 cms long with necessary fixing arrangement ,fancy type pillar tap cast copper alloy with capstan head cromium heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts complete.

S&F vitreous china urinal half stall type white with 32mm dia waste coupling of PTMT (min wt 45gm) 25mmdia PVC wast pipe necessaty fixing arrangements and ,urinal speader of PTMT for fixing of 15mmdia pipe(min wt 60 gm )

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.

S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms)

S&F in repair waste coupling of PTMT (half or full threaded) complete

S&F shelf of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12CM wide with chromium plated bracket guard and railing 60 CM long complete all as specified.

S&F 15mm bore fancy type stop valve / angle valve of cast copper alloy chromium plated screwed down, high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair bib taps 15mm bore short body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : F330003) Make : Hindware

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft /loose soil

Excavating in trenches , n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc.or for shafts, wells, cesspits, manholes, peirs holes, laying of cable or pipe line etc.n exc 10sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed

M&L cement concrete Type D2 1:4:8 ( 40 mm graded Aggregate ) in foundations,filling and mass concrete complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed

Hardcore Broken stone or boulders of gauge exc 63 mm n exc 100 mm,deposited,spread and levelled in layers n exc. 15 cm thick,watered and rolled/ rammed to a true surface complete all as specified and directed

M&L cement concrete type D-2 ,1:4:8 75 mm thick (40 mm graded aggregate) complete all as specified and directed

Glazed Ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick on fair face of brick work or concrete CM 1:4 complete all as specified and directed

excavating in post hole holes (or similar holes) each n exc 0.5 cum getting out ,returning ,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm soft/loose soil watering ,and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed

S&F 40 mm dia. stop valve,cast copper alloy,screwed down,high pressure ,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

M&L precast cement concrete type B1 1:2:4 (20 mm graded aggregate ) set in cement mortar 1:4 in landing,cover slabs (for manholes etc.) chullah hoods,chajjas,water troughs,mangers,shelves and similar articles with plain faces complete all as specified and directed

M&L for 40 mm thick cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement

Mild steel TMT bars 10 mm dia and over,cut to length, bend to shape required,including cranking ,bending spirally for hooping for column,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips

M&L formwork(rough finished) on flat surface of concrete foundation,footings,bases of column,raft and raft beams,sides and soffits (if any ) of foundation and plinth beams;and similar work;vertical or to batter complete all as specified and directed

cement concrete type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using ex-tra cement ,including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed

Dismantling wrought iron or mild steel fencing work of any description complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Fixing only mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed ,drilling holes,notching for wires etc.flat iron fillets (for securing wire mesh etc)fixed to fencing post, conforming to Gde E-165(Fe-290)

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) fixed to fencing posts , conforming to Gde E-165 (Fe 290).

S&F Mild Steel Round bars 10 mm dia and over, cut to length,bend to shape required ,including bend to shape required ,including cranking,bending as a tie bars fixed to fencing posts including necessary welding where required as per site requirement Fe290 (Gde-E-165) complete all as specified and directed

S & F mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment complete all as specified and as directed conforming to Fe-410 W complete all as specified and directed

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Supply only chain link fencing shall be measured and paid for separately.

Supply only mild steel galvanized chain link fencing 4mm dia of mesh wire, mesh size 100x100mm including line wires complete all as specified and as directed.

M&L preparation of old steel surface and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed

S&F galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directed.

S&F 2 mm thick fibre glass reinforced translucent plain sheeting with self fixed screw, coach screw and washer in roof ,wall etc all as specified and as directed

M&L preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and as directed

S&F mild screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one one hexagonal or square nut n exc 5cm long complete all as specified and as directed

Labour only for boring under road/ drain /PCC path by mannual method for inserting the 25mm dia GI tubing complete all as specified and as directed

M&L for supplying, laying, connecting and testing 25mm bore steel water tubes medium grade galvanised with all fittings laid in trenches or fixed in wall or ceiling or laid in floor complete all as specified and directed

S&F 25mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for Point wiring with 1100 volt grade 1.5sqmm (nominal area) single core PVC insulated FRLS multi-stranded copper conductor cable (Phase - Red, Neutral - Black) drawn through and including rigid non-metallic PVC concealed conduit medium grade of suitable size but not less than 20mm dia, with all fittings, concealed in wall/roof /floor including cover plates (inner and outer) suitable for housing switches/ sockets/ regulators etc. along with necessary metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for :- One light point controlled by one switch 6 Amps 1 way.

,---ditto--- all as per Item 107 above but One Fan point controlled by one switch 6 Amps complete all as specified.

,---ditto--- all as per Item 107 above but One 3 pin 5/6 Amp socket out let on same board with other switches complete all as specified.

,---ditto--- all as per Item 107 above but One 3 pin 5/6 Amp socket out let on independent board complete all as specified.

,---ditto--- all as per Item 107 above but point wiring with 4 sqmm PVC insulated multistranded copper conductor cable suitable for one 3 pin 15/16 Amps socket outlet on independent board controlled by one switch complete all as specified.

S & F switch piano type, flush button, single pole one way, 5/6 amp complete all as specified & directed.

S & F switch piano type, flush button, single pole one way, 15/16 amp complete all as specified & directed.

S & F Socket outlet, 2-in-1, 3 pin, 6 & 16 Amp, flush type 230 V AC complete all as specified & directed.

S & F hum free electronic step fan regulator 100 W, 120-280V (socket type) including connection complete all as specified.

S & F Socket outlet, 2-in-1, 3 pin, 6 Amp, flush type 230 V AC complete all as specified & directed.

S&F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete all as specified and directed by Engr-In-Charge.

S & F MCB Distribution board, SPN 4 Way DB powder coated, CRCA steel sheet,degree of protection IP 43 - IK 09 with reversible Double Door, recess mounted for MCBs, having insulated 100 amps tinned copper bus bar, Neutral link, Earth Bar and Din rail, detachable gland plate, interconnection, earthing connection, blanking plates in unused space suitable for use on 240 V, 50 Hz supply complete all as specified & directed.

S& F MCB of C series SP, 6-32 amps, C series having breaking capacity 10 KA, ISI marked including reqd wiring with copper lugs of suitable size provided in MCB DBs 240 volts complete all as specified & directed.

S& F MCB of C series Double pole 40 to 63 amps, C series having breaking capacity 10 KA, ISI marked including reqd wiring with copper lugs of suitable size provided in MCB DBs240 volts complete all as specified & directed.

S&F in repairs LED batten 0.6m made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1000 lumens at a minimum system efficiency of 100 lumens per watt and total power consumption not more than 10 watt (including driver), have a rated system life time of 40000 burning hours at L70 and should have colour temerature of 6500K, CRI>80, THD<10% and PF > 0.95 complete all as specified and directed.

S&F in repairs LED batten 1.2m made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumens per watt and total power consumption not more than 20 watt (including driver), have a rated system life time of 50000 burning hours at L70 and should have colour temerature of 6500K, CRI>80, THD<10% and PF > 0.95 complete all as specified and directed.

S & F Sub main wiring with PVC insulated cable 2 single core 6 sq mm 1100 V grade PVC insulated FRLS multistranded copper conductor alongwith 1 single core 6 sq mm 1100 V grade PVC insulated FRLS multistranded copper conductor cable as earthwire drawn through and incl rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, concealed in wall / roof/ ceiling incl all specials like joint elbow, Tee, junction, bend etc Note : (i) Two run single core PVC insulated multistraded copper conductor (FRLS) cable conduit and one length of earth cable and one run of PVC conduit shall be measured and paid for one length (ii) Cutting through wall for concealed conduit etc shall deemed included in quoted rate.

S&F LED bulk head light fitting 9/10 watt IP 66 & IK 09 with polycarbonate body with LED driver duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed.

S&F in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00, BEE 5 star rating with brushless direct current motor (BLDC) including taking down old one and deposited to store complete all as specified & directed.

S&F in replacement exhaust fan, steel body 300mm sweep, 230 V single phase with blades, frame and louvers, after dismantling old item and deposite to store complete all as specified & directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Sh. Manoj Nagar

Shiv Construction Company

MSR INFRATECH

S.R.Enterprises