SPECIAL REPAIRS TO BLDG NO P168 AND REPLACEMENT OF ROOF SHEETING TREATMENT AND MISC WORK AT CERTAIN BUILDINGS DUE TO DAMAGE CAUSE BY CYCLONE TAUKTAE NATURAL CALAMITY AT KENDRIYA VIDHALAYA I UNDER AGE BR II AND AGE EM II OF GE NW VASCO

Amount

SPECIAL REPAIRS TO BLDG NO. P-168 UNDER AGE B/R - II OF GE (NW) VASCO

Taking down cement plaster on brick work or stone walls etc including racking out of joint , hacking for key scrubbing down with water etc.

M&L for Rendering in 15 mm thick on fair faces of brick work in layers, first layer 10 mm thick in cm 1:6 and second finishing coat 5 mm thick in cm 1:4 mixed with water proofing compound as per manufacturers instructions and finished even and fair on external surfaces. Note : WPC shall be measured and paid separately.

M&L for rendering 10mm thick on other than fair faces of brick or concrete surface of wall in CM 1:6 be finished even and smooth (without using extra lime or cement)

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS15489:2004., alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm over new surface complete all as specified.

Supplying only Integral waterproofing compound

M&L two coats of distemper oil emulsion over a coat of alkali-resistant priming paint on new plastered walls surfaces complete all as specified.

M&L for complete removal of existing treatment, washing, rubbing down and stopping of distempered surfaces and applying two coats of distemper oil emulsion over a coat of alkali-resistant priming paint on old plastered walls all as specified.

Dismantling, floor, hearth or wall tiling including CM, bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

M&L for PCC 1:2:4 type B0 using 20 mm graded aggregate ,25mm thick as in leveling sub base

M&L for Vitrified light shade ceramic tiles 10mm thick (square / Rectangle) polished, area of each tiles n.exc.0.36sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed or bedding layer of mortar 20mm thick CM 1:4 for laying floor finishes.

All as item No. 1.10 above for work on vertical surfaces such as skirting, dados and risers to step etc in setting 10 mm thick CM 1:3

M &L Non -skid coloured ceramic joint free tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed in CM 1:4

All as item No. 1.13 above for work on vertical surfaces such as skirting, dados and risers to step etc in setting 10 mm thick CM 1:3

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:3 on fair face of brick or concrete surface

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

M&L for Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted all as specified and as directed.

S & F 35mm thick 2nd class hardwood factory made Plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial Ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of railand stiles as per IS 1003 (Part I) kiln seasonel and chemically pressure trated

M&L for applying two coat of Synthetic enamel paint for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed.

S&F Factory made solid PVC molded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc.,

S&F, 75mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21

S&F aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified.

S&F aluminium anodised barrel tower bolts, extruded section of size 100mm long all as specified.

S&F aluminium handles cast type anodised 150 mm size.

S&F aluminium handles cast type anodised 100 mm size.

S & F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed.

S&F 140mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring.

S&F fixing aluminium powder coated sliding window using alumimium section weighing not less than 0.49 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with aluminium anodised snap beads, screws and fixed alongwith same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for aluminium wiremesh shutters etc (The rate is inclusive of all fixings and fittings of builders hard ware such as wirmesh locking arrangements etc complete all as directed by Engineer-in-Charge).

S&F fixing aluminium powder coated ventilators using alumimium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodised snap beads, screws and fixed alongwith with 5mm thick frostes/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh hinges, bow handles, locking arrangements etc complete all as directed by Engr-in-Charge.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) all as specified and as directed.

M & L for 75 mm thick plain cement concrete in 1:3:6 mix, type C2 using 40mm graded stone coarse agregate as in plinth protection.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm dia including breaking the existing pipe complete all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm dia including breaking the existing pipe complete all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floors or trnches 75mm dia including breaking the existing pipe complete all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors 110mm dia including dismantling the existing pipe and taking out of trenches complete all as specified.

Supply and Fix in repairs PVC (SWR) bend any radius with access door suitable for 110mm dia pipes.

Supply and Fix in repairs PVC (SWR) bend any radius with access door suitable for 75mm dia pipes.

Supply and Fix in repairs PVC (SWR) Vent cowl suitable for 110mm dia vent pipe.

M & L for taking up or down old steel tubing of 15mm dia and connections including cleaning for refixing or removal to store

M & L for taking up or down old steel tubing of 20mm dia and connections including cleaning for refixing or removal to store

S & F of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all as specified complete.

(a) 20mm dia bore

(b) 25mm dia bore

S&F 25 mm dia Ball valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule fixed in repairs.

S&F 25 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe fixed in repairs.

S&F 15mm dia pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes all as specified and as directed fixed in repairs.

S&F 20mm dia bib taps fixed in repairs, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed

S&F 20mm dia Stop valve fixed in repairs,Fancy type, CP, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union all as specified and as directed

S&F in repair PVC connection 450mm long of superior quality as specified.

S& F Brass chromium plated stainless steel towel rail, 20 mm dia 'D' type, 60 mm long between flanges and fixed in repairs.

S & F Grating round 140mm size of PTMT (Minimum weight 50gms) complete all as specified and as directed fixed in repair

S&F Vitreous china Wash Hand Basin, white, flate back of size 550x400mm excluding taps, waste, chain and plug and porcelain stopper out including brackets.fixed in repairs.

S & F Vitreous china wash down water closet (pedestal pattern ) white (excluding fixing bolts flushing cistern and flush pipe ) in repairs

S&F PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe etc., and connected to water closet as per manufacturers instruction and as directed by the Engineer-in-Charge including removal of existing cistern etc.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S & F for roof trusses (framed) , trused purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc.all as specified.

M&L Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thickof an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified.

S&F for 1mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and stright flashings (length and grith as fixed) with grade of Zinc coating 275 complete

MS screw bolts machine made fitted with washers length nexc 5 cm and dia 16 to 20mm.

M & L Preparation of new steel surfaces over 10cm width or girth and priming with red oxide primer and painting with synthetic enamel painting two coats.

Dismantling boarding, any description, fixed in any position with nails

Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

S&F aluminium snap grid frame work for false ceiling all as specified

S&F 12mm thick semi perforated particle board tiles for insulation and accoustic purposes, 60 X 60 cm in size, fixed with screws and on aluminium snap grid .complete all as specifed.

S&F Hangers 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by mean s of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

REPLACEMENT OF ROOF SHEETING/ TREATMENT AND MISC WORK AT CERTAIN BUILDINGS DUE TO DAMAGE CAUSE BY CYCLONE TAUKTAE (NATURAL CALAMITY) AT KENDRIYA VIDHALAYA-I UNDER GE (NW) VASCO

Refixing of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.

M&L flat iron as in wind tie for roof including securing bolt including all necessary drilling,bolting or riveting etc and similar work conforming to Fe -290 Gde -E-165

M&L preparing new steel surfaces with two coat of sythetic enamel paint over a coat of red oxide of any description n.exc10cm in width or girth,when unconnected with other painted in different tint and all as specified and as directed

M & L rendering 10 mm thick,plaster in CM 1:4 on internal wall of bricks or concrete, finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 15 mm thick,plaster in CM 1:6 on External wall of bricks or concrete, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surface of wall and applying two coats of cement base paint over a coat of white wash.

M&L for preparing of existing treatment and applying one coat of oil bound distemper over a coat of alkali resistant priming paint.

Dismantling existing water tank of exc 250 ltr but n.exc 1000 Ltrs capacity and removing to store.

Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipes etc exc. 500 ltrs but n. exc 1000 ltr capacity, removing the dirty water, sludge and other depositions to a distance not exceeding 50 mtr to make the tank totally dirtfree and finally cleaning the water tank with fresh water till water becomes clear to entire satisfaction of Eng-in-Charge and as specified in particular specification and refixing of float valves all as specified and directed

S&F PVC Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in repairs all as specified.

S&F 20mm dia brass ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed as directed Engr- in -Charge.

S&F CPVC tank adaptor 25mm bore fixed to PVC tank completed

Taking up or down steel water tubing 15mm bore and connections, including cleaning for re-fixing

All as in item No. 2.14 above, but 20mm bore pipe.

Supplying & laying CPVC water tubing outer dia 20mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floors.

All as in item No. 2.16 above, but 25mm bore pipe.

Demolition of laterite stone masonary walls built in Cm and removing thr debries to a distance n.exc 500 mtr as directed

M&L for pre-cast cement concrete 1:3:6 block masonary with grade C 1(20mm gradedstone aggregate with solid block wall built in cement mortar1:6

SPECIAL REPAIRS TO BLDG NO. P-168 UNDER AGE B/R - II OF GE (NW) VASCO (INTERNAL ELECTRIFICATION)

Taking down carefully copper/ aluminium point wiring of any type, batten or conduit, (Light, Fan, Socket or power) complete incl fittings and making good the disturbed surfaces of walls, ceiling etc in cm and applying two coats of white /colour washing/ distempering etc to match the existing surface complete all as directed by Engineer - in- Charge.

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/ colour washing / distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

(a) One light /Tube point controlled by one, one way switch 06 Amps

(b) One ceilling fan/exhaust fan point controlled by one, one way switch 05/06 Amps

(c) One bell point controlled by one, one way switch 05/06 Amps

(d) One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 05/06 Amps switch

(e) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No. 5.00 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed.

Supply & fixing switch piano modular type, 06 Amps, one way, 1 module 240 volts complete all as specified & directed.

Supply & fixing of bell push, modular type 06 Amps, 01 module 240 volts complete all as specified & directed.

Supply and fixing bell, AC, 230 volts, single pole, ding dong type size compete all as specified & directed.

Supply & fixing switch socket combination flush type, 16 Amps single ploe, one way 240 volts complete all as specified & directed.

Supply & fixing switch socket combination modular type, 16 Amps 3 module 240 volts complete all as specified & directed.

Supply & fixing switch socket outlet 2/3 pin, 06 Amps modular type 3 module 240 volts complete all as specified & directed.

Supply & fixing switch socket combination 3 pin, 06 Amps flush type 240 volts complete all as specified & directed.

Supply and fixing ceiling fan regulator, electronic, type, rotary 0 to 04 steps, hum free, AC, 230 volts, 100 watts duty ISI Marked with and including modular white surround complete all as specified & directed

Supply and fixing ceiling fan regulator, modular type steps, hum free, AC, 230 volts, 120 watts 2 module ISI Marked with and including modular white surround complete all as specified & directed.

Supply & fixing lamp holder (Angular/Straight), insulated body, with back plate for batten fitting complete all as specified & directed

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

Supplying and fixing LED integrated batten T-5 indoor decorative aluminium extruded T-5 LED Battens intergarted type durable batten and including LED tube 220-240 AC, 50 Hz 18 watts and all accessories pre wired including provision of flexible cord of size 23/0.0076 of required length from ceilling rose to tube light fitting complete all as specified & directed

S & F Endura flat panel ultra slim (Edge-Lit) 36 Watt LED Edge - lit luminiare suitable for armstrong/ grid ceiling complete with seperate electronic driver, 36 Watt LED 6000 K product code LHECDIL71L1W036 diffused type optics fixture size 595 x 595 MM.

M & L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings, brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

Supply & fixing MCB , SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing Isolator, SPN, AC, 240 volts of 40 to 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing Isolator, TPN, AC, 415 volts of 100 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Supply & fixing Sheet Metal Enclosures TPN, 4 way, 415 Volt, Double door for housing MCB's/ Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity. Make;- Havells/C&S /Legrand

Supply & fixing Sheet Metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps capacity 240 volts 'B' series 10KA and making connections complete all as specified & directed including taking out old u/s any capacity.

Supply and fixing 6 Sqmm flat twin core, 1100 Volts grade, heavy duty, Aluminium stranded conductor cable served with PVC inner sheathing and overall PVC insulated for service connections and gripped with PVC clamps and including taking out the existing unserviceable cable etc complete all as specified and directed.

M & L for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, steel earth plate connected with GI wire 4.0 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 5 of SSR part I connecting to main swith board/ Main DB including excavation earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel, wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 06 mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed

Taking down carefully ceiling fan/exhaust fan of any capacity all as specified and directed.

Supply only LED Bulb 12 watt 240 volt

S & F white modular cover plate with frame of 01 module

S & F white modular cover plate with frame of 02 module all as specified and directed.

S & F white modular cover plate with frame of 03 module all as specified and directed.

S & F white modular cover plate with frame of 04 module all as specified and directed.

M/S Kartik Enterprises

Leela Enterprises

Deepti Engineering Works

M/S DUBAL CONSTRUCTION

Super Construction

M/S P S BABU

M/S. M M S ENTERPRISES

SHIVRAJ CONSTRUCTIONS

Tara Construction

M/S jvsr constructions