Creation of 100KVA substation alongwith HTLT network at Garar Khour and Augmentation of 100 KVA Sub station to 250 KVA at Krishna Nagar Nikkian Scheme code PDDSS2526100491 under UT Capex Budget falling under the jurisdiction of SD Jourian on Turnkey

Amount

Creation of 1x100 KVA Sub station at Garar Khour Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)(Scheme Code PDDSS2526100491)

11/0.433 KV, 3 Phase 100 KVA Distribution Transformer with Bi-Mettalic Terminal Connectors (Energy Level-2) Aluminium wound with extremely fitted MCCB 200 amp with cable box and 4x4 mtrs. Suitable cable of ratings

Gapless Surge Arrester, 9 KV, 10 KA, Lightening Arrestor with Polymer housing Station Type

11 KV GO, AB Switch 3 Phase, 3 Pole, 200 amp, vertical type

11 KV Horn Gap Fuse Set 3 Phase, 200 amp

185 mm² Single core cable, 1.1KV Grade, PVC insulated stranded conductor FRLS type

ST Poles 9.0 Mtr long (ST -410 SP 33)

11 KV Polymeric Composite Disc Insulators 12KV, min following load 45 KN, Lightening impulse 75KV positive and 80KV negative, creepage distance 320mm with Fittings

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts & Bolts

Earthing of Sub-Station -Excavation of earth pitof diameter 650mm and deapth 3000mm, installation of earthing pipe of 40mm nominal bore and 4mm wall thickness and length 2.5m long as per IS 1239 GI Strip for neutral earthing of size 25mm into 3 mm for connection of transformer body, GO Set and lightening arrestor as per IS 2629/85, GI Nuts & Bolts, refilled with earth enhancement material

11 KV Polymeric composite Pin Insulators 12KV, 5KN,lighting inpulse 75KV positive and 80KV negative, creepage distance 320mm

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Wedge connectors/PG Clamps

Danger Plates with Clamps

GI Barbed wire for Anti Climbing

Cement Bottoming 1:2:4 mix as per REC Standards 0.5cum/pole

Painting of Poles Red-Oxide

Painting of Poles Aluminium Paint

Sundry items like Aluminium Lugs, Jumpers, Binding Tape Aluminium Thimbles etc.

Laying of 0.80 KM 11KV line on 9 mtr PCC Poles using ACSR Weasel at Garar Khour (Scheme Code PDDSS2526100491) (Supplying, Installation, Testing & commissioning comp Job)

PCC Poles 9.0 Mtr long (WL:300Kg )

GI Channel X-arm including clamp and braces

ACSR weasel Conductor(30 mm²)

PG Clamps for 30 mm2 ACSR Conductor

11 KV Polymer composite Pin Insulators 12KV,5KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm

11 KV Polymeric Composite Disc Insulators 12KV, min following load 45 KN, Lightening impulse 75KV positive and 80KV negative, creepage distance 320mm with Fittings

Galvanized nuts & Bolts

Danger Plates with Clamps

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Stone Pad

Aluminium Jointing Sleeves

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Erection of 1 no 11KV Tapping point for newly constructed sub station at Garar Khour (Scheme Code PDDSS2526100491) (Supplying, Installation, Testing & commissioning comp Job)

PCC Poles 9.0 Mtr long (WL:300Kg )

GI Channel/ Angle iron including clamp

11 KV GO, AB Switch 3 Phase, 3 Pole, 200 amp, vertical type (Providing, Erection, Testing and Commissioning.

30mm2 ACSR Weasel Conductor

PG Clamps for 30 mm2 ACSR Conductor

11 KV Polymer composite Pin Insulators 12KV,5KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm

11 KV Polymeric Composite Disc Insulators 12KV, min following load 45 KN, Lightening impulse 75KV positive and 80KV negative, creepage distance 320mm with Fittings (Providing, Erection, Testing and Commissioning.

Galvinized Nuts & Bolts

Danger Plates with Clamps

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete (Providing, Erection, Testing and Commissioning.

Stone Pad

Laying of 2.0Km. LT line ( 3 Phase 4 wire) on 8 meter PCC poles using ACSR weasel at Garar Khour (Scheme Code PDDSS2526100491) ( Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

PCC Poles 8.0 Mtr long (WL: 200 Kg)

GI U-Clamps for Shakle Insulators

ACSR Weasel conductor(30 mm²)

16 KN polymer shackle insulators

Galvanized nuts & Bolts

Danger Plates

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Stone Pad

Aluminium Jointing Sleeves

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

LT Line Spacers

Augmentation of 100 KVA Distribution Sub station to 250 KVA sub station at Krishna Nagar ( Nikkian) ( Scheme Code PDDSS2526100491)

11/0.433KV, 3 Phase 250KVA Distribution Transformer with Bi-MettalicTerminal Connectors ( Energy level-2) copper wound and with LV Cable Box having detachable Aluminium Gland plate

Transformer bed

LT Distribution Box for 250 KVA DTR with MCCB for incomer and switch Fuse units for outgoing circuits

Gapless Surge Arrester, 9 KV, 10 KA, Lightening Arrestor with Polymer housing Station Type

11KV GO , AB Switch 3 Phase, 3 Pole, 200 Amp, vertical type

11KV Horn Gap Fuse Set 3 Phase, 200 Amp

240mm2 Single core Cable, 11KV Grade PVC Insulated Stranded Conductor FRLS type

ST Poles 9.0 Mtr long (ST -410 SP 33)

Galvanised Nuts and bolts

Earthing of Sub-Station -Excavation of earth pitof diameter 650mm and deapth 3000mm, installation of earthing pipe of 40mm nominal bore and 4mm wall thickness and length 2.5m long as per IS 1239 GI Strip for neutral earthing of size 25mm into 3 mm for connection of transformer body, GO Set and lightening arrestor as per IS 2629/85, GI Nuts & Bolts, refilled with earth enhancement material

Danger Plates with Clamps

GI Barbed wire for Anti Climbing

Cement Bottoming 1:2:4 mix as per REC Standards 0.5cum/pole

Painting of Poles Red-Oxide

Painting of Poles Aluminium Paint

V K ELECTRICAL CONTRACTOR (BID ID -2472528)

VEENA CONSTRUCTION CO. (BID ID -2473290)

The Trikuta Engineer (BID ID -2447374)