Renovation of 14 nos park near house no 320A 405A 932 988 1041 1082 1254 1465 1494 869B 908P 846 787 794 Sec 21 and 22 B and Dundhera Park ward no 4 Zone II Gurugram

Amount

NS Item

Providing laying grit wash consisting of 12mm coarse sand plaster and 5mm to 10mm Narnaul/ Dehradun etc. quarry mix with in 3 parts of cement…..

SUPPLY OF PRECAST CONCRETE RCC BENCHES HAND REST OF SIZE 1500MM MANUFACTURED BY M-30 GRADE OF CONCRETE. CONCRETEPLANKS IN RED COLOUR SIZE MMX400MMX50MM AND 1NO.OF CONCRETE PLANK IN RED COLOUR SIZE 1500MMX

Victorial Steel sitting bench of size 61"(L)x29½” (H)x 18½” (D). Seat with 5 steel pipe and back with five steel pipe of size 47mmx23mm rectangular of 16 gauge ISI mark e.r.w. spl. Pipe fixed with C.I. frame on both sides with durable nut-bolts duly welded to protect it unscrew. All duly anti rusting Red Oxide primered before P.U. bus green spray paint coating long lasting. (Including all taxes)

Supply of RH Pipe 1" dia.

Providing and laying 3/4"dia G.I pipe line.

Providing and fixing 3/4"dia Hydrant connection

Providing and fixing mono block motor 1HP and make Texmo complete in all respect

Multi Play Spiral-N-Tunnel Station Item code: ME-03 Covering Area: 30’L x 20’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5'H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no

(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade.

Leg Press: Providing designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micror thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high quality grip rubber on top end Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and selt lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitteed with in inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipments to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of

Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary

Rowing machine: Providing designing and fixing rowing machine of size 1280x800x1150 mm fabricated with main past of 114 mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base cover to be made up from virgin LLDPE

Arm and ShoulderWheel:- Providing, and fixing Arm and Shoulder Wheel of size 130 X '1200 X 1350 mm make of Green Gym or Equivalet fabricated with main post of 140 mm dia and 3.0 mm thic rest of the pipes are 40mm dia and 2.5 mm thick all pipc made up of hot roiled tubular steel and hot dippe galvanized, and powder coated using Akzo Nobel c equivalent of 80-120 micron thick. All welding joints of pip are robotic welded with joints scalloped as necessary an dressed off removing sharp edges and burrs. Zinc prime paint to be applied at all welding points prior to finishink Padals shall be made up of Nylon alloy with rounded edg of prevent any impact of injury and seat to be made fror virgin LLDPE manufactured by rotational moulding wit minimum thickness of plastic 4.00mm, colourful and resistant environmental friendly. Bearing used shall b maintenance fire, duly oiled sealed and self lubricated mad bY reputed company to be approved by Officer -in-Charge Equipment to be fitted within built limiters to preven unwanted movements. All open ends of pipe to be colourel by GI/LLDPE caps for user safety. The equipment to b fixed on ground with concrete of minimum strength M2: nd J shaped welded bolts and once the concrete is set, ft ;he equipment on to it and cover nuts and bolts with the bas Mate cover, all complete as per direction and approval o -2,ngineer-in-Charge regarding material, shape of equipment olour on metal, seat and base cover plate and fixing o equipment etc.

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Elliptica exerciser: Providing designing and fixing elliptical exercise of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2”, ¾” & vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick.

Sea-Saw (4 seater): 8’ L x 5’.5 W x 15” high. Frame is of m.s pipe 2” x 12gauge. Sitting planks is of m.s pipe 2” x 12 gauge and its cantilever & handles is of m.s pipe ¾” x 12 Guage .Sitting seats-4nos is of molded FRP material in 3mm thick with suitable PU Primer & PU Paints.

Merry-Go-Round (4 seater): 5' Dia. Main frame is of m.s sq. pipe 2" x 2" x 14 G and having suitable handle & foot-rest is of m.s round pipe 3/4" x 12 Gauge. Central pipe is of m.s pipe 3" x 12 G which further supports with m.s pipe 1” x 12Gauge with heavy duty shaft 50 mm thick & ball bearing assembly. It consists of 4 no Chair made of Molded FRP Plastic in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints.

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge & m.s rectangular pipe

Plantation complete at site in position loading & unloading supply Legestromia indica in 13"x13" poly bag, well grown

Jetropha 3' ht 13''x13'' well grown

Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm bushy in big size HDPE bag.

Supply and satcking of Bougainvilea (variety Butiana, Lady Mary Baring, Mahara, Mohan, Scrarlet Queen, Varigata, etc. 60-75 cm

Dward cana multi colour ht1" well grown in 12x12 ply bag

Providing Plumeria alba of plants height 165-180 cm with 3-4 branches and thick stem in big size HDPE bags

Supply and stacking of plants Hamelia patens of height 60-75 cm with 6-8 branches in poly bags of size 25 cm

Providing Bismarkia Palm 115 to 180 cm ht. plant well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot

Supply and stacking of plants Kaner dwarf Red 1'½'' ht, 8''polybag, spread1' well grown

Providing Euphorbia milli hybrid varieth plant having ht. 30 cm to 45 cm with multi branch full bloom fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot.

Supply and stacking of plants Tecomagaudichaudi 2'ht, 8''polybag, spread1' well grown

Chandini verigated in cement bag well grown

Harsingar 5' - 6' green cement bag well grown

Bottle palm with clear stem 3', ht. 7'-8'

Calendera 3'ht well grown

Bidder Name

Amount

M/s Sami Greenmax Landscape Pvt. Ltd.(GSTN-06AAPCS4484A1Z9)

agrisense landscape(GSTN-06AJIPS5096F1ZU)

M/s Lakshay and Company(GSTN-NA)

M/s Sami Greenmax Landscape Pvt. Ltd.

agrisense landscape

M/s Sami Greenmax Landscape Pvt. Ltd.

agrisense landscape