Proposed construction of first floor in Community Center at Rai Village, Reservation No. 56 C, Bhaindar (W) in MBMC area.

Amount

Description

ITEM NO.01 Excavation for foundation in earth, soil of all types, sand, gravel and softmurum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) SSR 150/21.02

ITEM NO.02 Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete.(Lift from 1.5m to 3.0m) SSR 150/21.04

ITEM NO.03 TRANSPORTING OF EXCAVATED MATERIALS lead 3.00 k.m. SSR C1

ITEM NO.04 Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. SSR 154/21.38

ITEM NO.05 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/granite/quartzite/gneiss metal for bed blocks, foundation block sand such other items including bailing out water,plywood/steel formwork,laying/pumping,compacting, roughening them if special finish is to be provided,finishing uneven and honey combed surface and curing etc.complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag,plastic,tarpaulin etc.(Wooden centering will not be allowed.),with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc.complete. With natural sand/V.S.I. quality Artificial Sand SSR 179/24.10

ITEM NO.06 Providing and laying Cast in situ/Ready Mix cement concrete M30 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curingetc. complete.(Excluding reinforcement and structural steel). with fully auto matic micro processor based PLC with SCADA enabled reversible DrumTypemixer/concrete Batch mixplant(Panmixer)etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 182/25.15

ITEM NO.07 Providing and laying Cast in situ/Ready Mix cement concrete M30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curingetc. complete, (Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabled reversible DrumTypemixer/concrete Batch mixplant(Panmixer)etc.complete.Withnaturalsand/V.S.I. quality Artificial Sand SSR 186/25.35

ITEM NO.08 Providing and laying Cast in situ/ReadyMix cement concrete M30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, coverblocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro process or based PLC with SCADA enabled reversible DrumTypemixer/concrete Batch mix plant (Pan mixer)etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 188/25.54

ITEM NO.09 Providing and laying Cast in situ/Ready Mix cement concrete M30 of trap/granite/quartzite/gneiss metal for R.C.C. slab sand landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible DrumTypemixer/concrete Batch mix plant (Pan mixer)etc. complete.With natural sand/V.S.I. quality Artificial Sand SSR 191/25.74

ITEM NO.10 Providing and laying Cast in situ/Ready Mix cement concrete M25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, coverblocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer)etc. complete. With natural sand/V.S.I.quality Artificial Sand SSR 193/26.07

ITEM NO.11 RCC Pipe Np 4 heavy duty non presure pipe 1000 mm diameter SSR 355/29

ITEM NO.12 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 199/26.33

ITEM NO.13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR 212/27.05

ITEM NO.14 Providing and fixing frame with/without ventilator of sizeas specified with Country cut teak wood for door sand windows including chamfering, rounding, rebating, iron hold fast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR 259/39.01

ITEM NO.15 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish, scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. SSR 239/34.09

ITEM NO.16 Providing and fixing single leaf panelled door shutter without fan light and shutter 35mm thick as per drawing consisting of T.W. top rail size 100mmx35mm and bottom and lock rail 200mmx35mm insert panel 12mm thick commercial ply faced T.W.particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. SSR 260/39.06

ITEM NO.17 FRP Door Shutter 35 mm thick Factory Made Shutter SSR 346/54

ITEM NO.18 Providing and fixing in position.(asperI.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50x38.10x1.02 mm at weight 0.547kg/Rmt .and window frame bottom track section 61.85x 31.75x1.20mm at weight 0.695kg/Rmt. Top and side track section 61.85x31.75x1.30 mm at weight 0.659kg/Rmt. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/Rmt. Inter locking section 40x18x1.10 mm at weight 0.469kg/Rmt. And handle section 40x18x1.25 mm at weight 0.417kg/ Rmt. and top section 40x18x1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixture sand fasteningssuch asroller bearing in nylon castingandself locking catch fitted in vertical sectionofshutterincluding 5mm thickplain glass with all required screwsandnutsetc, complete. With colour Anodising with box. SSR 267/39.37

ITEM NO.19 Providing and fixing in position (as per1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom tracksection92x31.75x1.30mm at weight 1.070kg/Rmt..Top and side tracks ection 92x31.75x1.30mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40x18x1.25 mm at weight 0.417kg/Rmt.Interlocking section 40x18x1.10 mm at weight 0.469kg/Rmt.and handle and top section 40x18x1.25 mm at weighto.417kg/Rmt.As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and sel flocking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc,complete. With colour Anodising with box SSR 269/39.41

ITEM NO.20 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1kg per cement bag curing the same for not less than 2 day sand keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grain sand curing for fourteen days scaffolding etc.complete. SSR 224/32.11

ITEM.NO.21 Providing internal cement plaster 12mm thick in single coatin cementmortar 1:4 without neeru finish to concrete or brick surfaces,in all positions including scaffolding and curing etc. complete. SSR 224/32.04

ITEM NO.22 Providing and laying vitrified mirror/glossyfinishtiles decorative type having size590 mmto605mmx590mmto 605mm of8to10 mmthickness and confirmingtoIS.156222006(groupBla)of approved make,shade and pattern for flooringinrequiredposition laid on a bed of 1:4 cement mortar including neat cement float,filling joints,curing and clearing etc. complete. a) Flooring SSR 233/33.40

ITEM NO.23 Providing and laying vitrified mirror/glossyfinishtileshaving size 590mm to 605mm x 590mm to 605mm of 8 to10 mm thickness and confirming toIS.15622-2006(groupBla)of approved make,shade and pattern for flooring in required position laid on a bedof1:4 cement mortar including neat cementf loat,filling joints,curing and clearing etc.complete.b) Skirting SSR 233/33.41

ITEM NO.24 Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry,curing,polishing and cleaning etc. complete. SSR 230/33.18

ITEM NO.25 Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C. Cmember sand brick work, of approved quality including fixing meshin position by necessary drilling in concrete/B.B. masonry and or tying by binding wire etc. complete. SSR 226/32.26

ITEM NO.26 Providing and laying ceramic tiles of having size 30cmx30 cm confirming to I.S.15622/2006(group DII-A) and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. SSR 231/33.24

ITEM NO.27 Providing and laying ceramic tiles of having size 30cm.x30 cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. SSR 231/33.25

ITEM NO.28 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE:For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary SSR 243/35.26

ITEM NO.29 Providing and applying priming coat on concrete/masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand paperingas required etc. complete. SSR 242/35.21

ITEM NO.30 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. SSR 242/35.23

ITEM NO.31 Providing 25 mm to 30mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. b) Both side polish SSR 232/33.33

ITEM NO.32 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10years guarantee on court fee stamp paper of Rs.500/-including ponding test etc. complete. SSR 220/31.05

ITEM NO.33 Providing and fixing false ceiling of 10 to 12 mm thick decorative board soffibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawing sand three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders). SSR 250/38.17

ITEM NO.34 Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T50mmx 40mm weighing 0.39 kg/m. at 60 cms c/c and fixed with (15x 15mm)flanges weighing 0.119kg/m suspended on 6mm dia. mild steel rod weighing 0.22kg/m fixed on wall and beams including rounding of the edges with aluminium T of 50 mmx40 mm weighing 0.39 kg/m etc. including all labour etc. complete. SSR 249/38.14

ITEM NO.35 Providing and fixing heavy duty inter locking concrete Gray paving blocks of 80mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30mm thick including skirting joints and cleaning etc. complete. SSR 235/33.50

ITEM NO.36 Providing and fixing green marble of 18 to 20mm thick for door frame/dado/window boxing etc.On C.M.1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. SSR 234/33.48

ITEM NO.37 Providing & Fixing of signage using 304 Stainless steel letters for the front & side fascia and 5mm thick acrylic molded letters, for back fascia moulded letters with height 24 inches, with necessary power supplies for connection, including profile LED back lighting (MR)

ITEM NO.38 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod, Paper holder etc. complete Spec. No.: As directed by Engineer in charge. SSR 295/42.20

ITEM NO.39 Providing and fixing 900 mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick tough ened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete SSR 281/40.07

ITEM NO.40 Providing and fixing white glazed earthen ware Wash Hand Basin of 55cm.x40cm. size including cold water pillar tap/coldand hot water pillar tap brackets,rubber plugs and brass chain,stop tap and necessary pipe connections including P.V.C. waste pipe and trap upto the outside face of the wall.Making good the damaged surface, testing etc. complete. SSR 290/41.63

ITEM NO.41 Providing cement based water proofing treat ment to terraces (Indian water proofing or alike) with brick bat slaid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M. 1:5 admixed with approved water proofing compound filling upto half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bat swith C.M. 1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jutefiberat 1Kg per bag including finishing the surfaces mooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mmx300mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper of Rs.500/ including ponding test etc. complete. SSR 219/31.04

ITEM NO.42 Providing and fixing 45cm wide mild steel ladder of 40mmx6 mm mild steel flat stringer sand steps of 18mm dia.mild steel bar for water tank including fixing it in(1:2:4)M-15 cement concrete block 60cmx30cmx30cm and painting the ladder complete. (Anti Corossive Paint) SSR 289/41.56

ITEM NO.43 Providing and fixing 20 to 25mm thick rough shahabad box type water proofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal,secrete (RMW),Algae proof or other alike water proofing liquids, raking of joints upto 35mm depth,filling the joints with 6mm size crushed metal,hand grouting with cement slurry,curingand cleaning,with 7 years guarantee on court fee stamp of Rs.100/with ponding test etc complete.(excluding Cement concrete 1:3:6 base concrete ) SSR 221/31.12

ITEM NO.44 Providing and fixing 20 to 25mm thick rough shahabad box type water proofing treatment to vertical out side faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other a like with one tile lift method,brushing the joints horizontally with cement slurry mixed with waterproofing liquid for width 30 to 35mm and sloping coping over top most tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid,curing,with 7 years guarantee on courtfee stampofRs.100/-with ponding test etc complete.(excluding Cement concrete 1:3:6 base concrete) SSR 222/31.13

ITEM NO. 45 Providing and fixing European type earthenware water closet pan of Hindustan / Perryware / Neycer / Cera or equivalant make with UPVC seat and lid with chromiumplated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) Spec. No.: Specfications Bd v 21 page 610 DSR 129/24 (b)

ITEM NO. 46 Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan of Hindustan / Perryware / Neycer / Cera or equivalant make 575 mm including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. low level flushing cistern with all necessary pipe connection etc. complete. Spec. No.: As directed by Engineer in charge. SSR 42.33

ITEM NO.47 Providing and fixing C.P.Two way BIB cock jaquar make continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge SSR 42.80

ITEM NO.48 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 ) SSR page no: 351/206

ITEM NO. 49 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. SSR 41.63

ITEM NO.50 Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. SSR 42.79

ITEM NO.51 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. SSR 41.80

ITEM NO.52 Providing and fixing earthenware lipped flat back/corner type Urinal of Hindustan /Perryware / Neycer / Cera or equivalant make with PVC 5 liters flushing system of 5 liters with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap & soil pipe connection up to the outside face of wall SSR 41.61

ITEM NO.53 Supplying & erecting Water level controller 230/415 V AC., Two way for under ground tank operation only. CSR 12-5-14

ITEM NO.54 Providing and fixing stabiliser pipe / U.P.V.C. SWR soil vent/waste pipe of Prince / Sudhakar / Kishan / Supreme or equivalent make (conforring to 15 spal) and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete. Spec. No.: As directed by Engineer in charge. DSR 135/41

a) 75 mm dia.

b) 110 mm dia.

ITEM NO.55 Supplying, fixing and testing UPVC pressure pipes (6 Kg/sqcm) confirming to IS 4985 for waste connection from wash basin, kitchen sinks to floor trap / anti syphonage pipe with solvent cement joints, including all the fittings, laid under floor / concealed etc. complete.

a) 32 mm dia.

b) 40 mm dia. SSR Page no.- 354/421

b) 50 mm dia. SSR Page no.- 354/429

ITEM NO.56 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) SSR 42.87

ITEM NO.57 Supplying and fixing of 160MM DIA Leaf trap with kurra made out of UPVC with flange and grating for rain water outlets on terrace etc., complete.

a) 160 mm dia

ITEM NO.58 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. SSR 41.80

ITEM NO.59 Providing and fixing UPVC floor clean out comprising of Plug, socket, elbow, extension piece caulked to pipe and plug with suitable inlet key for opening male threaded joint with Plug, pipe & socket.

ITEM NO.60 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.55

ITEM NO.61 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.56

ITEM NO.62 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.57

ITEM NO.63 Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.57

ITEM NO.64 Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 42.59

ITEM NO.65 Supplying, installing and testing approved make GM ball valves conforming to IS 1703 with unions etc., complete.

a) 25 mm dia (Screwed ends)

b) 32 mm dia

ITEM NO.66 Supplying and fixing approved make automatic air release valve with unions and necessary fittings complete all confirming to IS

a) 25 mm dia (Screwed ends)

ITEM NO.67 Providing and fixing diameter water meter with non-return valve including strainer, sockets/ union nut including water meter box making locking arrangement and lock. [Without chamber]. SSR 41.28

a) 25 mm dia (Screwed ends)

ITEM NO.68 water meter connection charges to MBMC

ITEM NO.69 Supplying, installing and testing water cooler of 100 liter capacity

ITEM NO.70 Providing, laying and jointing glazed stoneware pipes grade ‘A’ . with stiff mixture of cement mortar in the proportion of 1:2 (1cement :2 fine sand) including 150mm bottom pcc & Encasing of 100mm thick nominal mix cement concrete( M15)incuding shuttering,excavation to required depth and backfilling testing of joints etc. complete. . (Make = Modi Ceramics , Laxmi Balaji Ceramics , Lalchand & co.) DSR/136/45

a) 100 mm diameter

b) 150 mm diameter

c) 200 mm diameter

ITEM NO.71 Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C.supply of 3 HP with discharge 2 /4.9 Liters per second (LPS) for head of 14/36 and 50 mm suction/ 40 mm delivery pipe on provided c.c. foundation as per specification No. WP-CGP DSR 12-1-6

ITEM NO.72 Supplying and erecting strainer 75mm dia in position made of gun metal.

ITEM NO.73 Supplying, installing and testing approved make non return valve .

b) 75 mm dia

ITEM NO.74 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 8 ways for outgoing SP MCB’s on iron frame/wooden board as per specification No. SW-SWR/MCBDB DSR 5-4-15

ITEM NO.75 Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-8

ITEM NO. 76 Supplying, erecting & marking SPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-2

ITEM NO. 77 Supplying & erecting D.O.L. Starter suitable for 250V, Single phase , 50 cycles with overload element with neccessory materials. DSR 12-5-1

ITEM NO.78 Supplying and erecting kWH meter provided with maximum kW demand indicator for unbalanced load 3 phase 4 wire 50 cycles 230/440V AC supply with incorporated time switch of 30 minutes integration period and of 15 seconds tune required for decoupling, suitable to work on provided three numbers of instrument current transformers of class C accuracy with ratio 100/5 A -400/5 A complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs. DSR 6-3-5

ITEM NO.79 Supplying & erecting Static energy meter 230V, 50 cycles AC supply 5/10/20/40 A Class I accuracy I.S.I. marked with metal/polycarbonate enclosure. Meter with LCD/ LED display complete erected on polished T.W. board duly wired with required size of weather proof PVC wires duly tested for classII accuracy by electric supply company. DSR 6-3-2

ITEM NO.80 Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron frame/wooden board as per specification No. SW-SWR/MCCB DSR 5-5-1

ITEM NO.81 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. DSR 6-5-7

ITEM NO.82 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-1

ITEM NO.83 Load Manager Non DSR

ITEM NO.84 Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. DSR 6-5-2

ITEM NO.85 Supplying, erecting & marking TP MCB 80A in provided distribution board. NON DSR

ITEM NO.86 Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-14

ITEM NO.87 Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-8

ITEM NO.88 Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB DSR 6-2-11

ITEM NO.89 Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed. DSR 6-1-1

ITEM NO.90 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways, on iron frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB DSR-5-4-8

ITEM NO.91 Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB. (INCOMER) DSR 5-3-16

ITEM NO.92 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/25 A. 2 pole complete as per specification No. SW-RCCB/RCCB. (OUTGOINGS) NON DSR

ITEM NO.93 Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB (OUTGOING) DSR 5-3-3

ITEM NO.94 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-2

ITEM NO.95 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways, on iron frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB DSR-5-4-8

ITEM NO.96 Supplying, erecting & marking FP MCB 80A in provided distribution board. (INCOMER) NON DSR

ITEM NO.97 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 80A 2 pole complete.(OUTGOINGS) NON DSR

ITEM NO.98 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-2

ITEM NO.99 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways, on iron frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB DSR-5-4-8

ITEM NO.100 Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB. (INCOMER) DSR 5-3-16

ITEM NO.101 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/25 A. 2 pole complete as per specification No. SW-RCCB/RCCB. (OUTGOINGS) NON DSR

ITEM NO.102 Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB (OUTGOING) DSR 5-3-3

ITEM NO.103 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-2

ITEM NO.104 Supplying and erecting metal clad distribution board approved make 250V. 8 way,16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SW-SWR/MDB DSR 5-2-5

ITEM NO.105 Supplying, fixing and commissioning RCCB+MCB, electro magnetic type with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, 2 Pole, 1 Phase as per specification No. SW-RCCB/RCCB (INCOMER) DSR-5-4-5

ITEM NO.106 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-2

ITEM NO.107 Supplying erecting and marking Four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. DSR 5-3-24

ITEM NO.108 Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board. DSR 5-3-21

ITEM NO.109 Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron frame. DSR 5-4-23

ITEM NO.110 Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 32A, 415 / 500V erected on angle iron frame approved make. DSR 5-1-25

ITEM NO.111 Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW DSR 1-3-1

ITEM NO.112 Supplying & erecting mains with 2x2.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW DSR 1-3-6

ITEM NO.113 Supplying & erecting mains with 3x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW DSR 1-3-15

ITEM NO.114 Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 20 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.1 (FRLS) DSR 1-1-7

ITEM NO.115 Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.1 (FRLS) DSR 1-1-9

ITEM NO.116 Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box. DSR 1-7-7

ITEM NO.117 Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-1

ITEM NO.118 Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-2

ITEM NO.119 Supplying and erecting modular type switch 25A ISI mark approved make duly erected on provided plate and box with wiring connections complete. NON DSR

ITEM NO.120 Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-10

ITEM NO.121 Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-11

ITEM NO.122 Supplying and erecting modular type 3/5 pin25A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. NON DSR

ITEM NO.123 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-35

ITEM NO.124 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-36

ITEM NO.125 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-37

ITEM NO.126 Supplying and erecting White Footlight with 4 modules concealed modular box and lamp holder with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and morter / PoP as per required and duly connected in an approved manner. DSR 1-8-37

ITEM NO.127 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-39

ITEM NO.128 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-42

ITEM NO.129 Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box. DSR 1-8-25

ITEM NO.130 Supplying , erecting & terminating 3.5C x 35 sq mm, aluminium conductor, 11 kV, XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. CB-HT Non-DSR

ITEM NO.131 Supplying , erecting & terminating 3.5C x 25 sq mm, aluminium conductor, 11 kV, XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. CB-HT Non-DSR

ITEM NO.132 Supplying, erecting & terminating PVC armoured cable 4 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Non-7-2-12

ITEM NO.133 Supplying, erecting & terminating PVC armoured cable 4 core 4 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-9

ITEM NO.134 Supplying, erecting & terminating PVC armoured cable 4 core 2.5 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Non- DSR

ITEM NO.135 Supplying, erecting & terminating PVC armoured cable 3 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-7

ITEM NO.136 Supplying, erecting & terminating PVC armoured cable 3 core 4 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-6

ITEM NO.137 Supplying & erecting Siemens type brass cable glands for 2 to 4 core 2.5 sq mm /2 to 4 core 4 sq mm /2 core 6 sq mm for PVC armoured cable as per specification No. CB-GL DSR 7-7-1

ITEM NO.138 Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for PVC armoured cable as per specification No. CB-GL DSR 7-7-2

ITEM NO.139 Supplying & erecting Siemens type brass cable glands for 3 to 4 core 16 sq mm /3 to 4 core 25 sq mm /3 core 35 sq mm for PVC armoured cable as per specification No. CB-GL DSR 7-7-3

ITEM NO.140 Supplying & erecting crimping type copper lugs for cable upto 16 sq mm complete as per specification No. CB-CL/CU DSR 7-9-1

ITEM NO.141 Supplying & erecting crimping type aluminium lugs for cable 25 sq mm complete as per specification No. CB-CL/AL DSR 7-10-2

ITEM NO.142 Supplying & erecting crimping type aluminium lugs for cable 35 sq mm complete as per specification No. CB-CL/AL DSR 7-10-3

ITEM NO.143 Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 25 to 50 sq mm. cable, with necessary material as per specification No. CB-JT/LT DSR 7-4-9

ITEM NO.144 Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP).( Strip size = 25x3 mm ) DSR 9-2-3

ITEM NO.145 Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). ( Strip size = 25x3 mm ) DSR 9-2-3

ITEM NO.146 2# 2.5 sq.mm PVC insulated Flexible Cu. Wire Non-DSR

ITEM NO.147 Providing earthing with Copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification No. EA-EP DSR 9-1-2

ITEM NO.148 Providing earthing with Galvanised cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification No. EA-EP DSR 9-1-3

ITEM NO.149 Supplying & laying (including excavation) 15 cm dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). DSR 7-6-5

ITEM NO.150 Providing & constructing Brick Masonry Inspection Chamber ....................... size including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight .............. cover with frame fixed in cement concrete etc. complete. Spec. No.: Bd.V.43, Page No. 626 60cm x 45cm x 90cm C. I. lid with R.C.C. Cover. DSR 15-16

ITEM NO.151 Supplying, Erecting and Commissioning of Diesel generating set with alternator of 15 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, alongwith standard accessories, self excited self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti vibratring pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GENDG DSR 11-1-4

ITEM NO.152 Supplying, installing, testing & commissioning of 2500 VA Digital pure sine wave inverter based on IGBT technology single phase 230V,50 Hz complete as per specification no. APINV (Without batteries) DSR 3-6-4

ITEM NO.153 Supplying, installing, testing & commissioning of 1400 VA Digital pure sine wave inverter based on IGBT technology single phase 230V,50 Hz complete as per specification no. APINV (Without batteries) DSR 3-6-3

ITEM NO.154 Supplying and erecting 12 V/80AH TUBULAR Battery with battery terminal wire, duly charged complete with 36 months warranty complete DSR 3-8-1

ITEM NO.155 Supplying and erecting 12 V/135AH TUBULAR Battery with battery terminal wire, duly charged complete with 36 months warranty complete DSR 3-8-3

ITEM NO.156 Supplying and erecting 40W recess mounted batten LED luminaries complete fixture similar to bajaj model no.BLTRU 40W WH FLEXITRON VIVA Non- DSR

ITEM NO.157 Supplying & erecting 20W LED tube light with batten holder (Wall / ceiling mounted) Non-DSR

ITEM NO.158 Supplying and erecting bulkhead fitting suitable for integral LED upto 10W fixed on wall. Non DSR

ITEM NO.159 Supplying and erecting 10W LED complete fixture simillar to bajaj model- 112334 BIBWAP 10W Non DSR

ITEM NO.160 Supplying and erecting 30W STREET LED LIGHT complete fixture simillar to bajaj model- 169785 BCLST 30W Non DSR

ITEM NO.161 Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. DSR 2-12-5

ITEM NO.162 Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. DSR 2-12-10

ITEM NO.163 Supplying and erecting regular/ standard model Ceiling fan of 1400 mm. sweep complete erected in position as per specifcation no. FG-FN/CF DSR 2-13-4

ITEM NO.164 Supplying and erecting fresh air cum Exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner and marking Sr. No. and date of erection. DSR 2-13-14

ITEM NO.165 Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm DSR 2-12-12

ITEM NO.166 Supplying & erecting 20 guage G.I sheet metal CAWL rectangular / round shaped with 25 mm x 25mm x 3mm angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC DSR 2-12-18

ITEM NO.167 Supplying and erecting ‘B’ grade G.I.pipe/M.S. pipe down rod duly painted for fan complete erected with PVC two core flexible cable 24/0.2 mm copper PVC wire. (1 METER EACH) DSR 2-12-6

ITEM NO.168 Supply of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305). OBO Type No. RD 8/ALU (5021 28 6)

ITEM NO.169 Supply of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance OBO Type No. 177 30 M8(5207 46 0 )

ITEM NO.170 Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. OBO Type No. 165 MBG-8 ( 5218 69 1 )

ITEM NO.171 Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 16mm rod tapered to 10 mm aluminium rod :Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IS/IEC 62305). 3Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. OBO Type No. 101 VL3000 ( 5401 98 9 ). NON DSR

ITEM NO.172 Accessories : System consist of Fang Fix with base and clamp, on the top air terminal is erected. OBO Type No. F-FIX 16 ( 5403 20 0 ).

ITEM NO.173 Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform. 16 KG stone of 365 mm diameter, high level of stability. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked. OBO Type No. F-FIX S16 ( 5403 22 7 )

ITEM NO.174 Providing of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts . OBO Type No.251 8-10 ( 5312 03 5 )

ITEM NO.175 Providing of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. OBO Type No. 172 AR ( 5218 92 6 )

ITEM NO.176 Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS-IEC 62305)(2nos/expansion piece ). OBO Type No. 249 8-10 ST ( 5311 50 0 )

ITEM NO.177 Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 25x3 mm GI strip as specified in drawing and directed by Engineer OBO Type No. 271 8-10 ( 5317 40 1 )

ITEM NO.178 Lighting counter - To count no of lightning strike & it can record the date and time of the lightning incident also tested as per IEC 62561-6. OBO Type No. LSC I+II ( 5091 72 2 )

ITEM NO.179 Providing of Bridging cable: From flexible CU cable of 16mm2 with black colur coating, chlorinated India rubber mixture .Exclusively used for indoor & outdoor application to make continuity at terminals. OBO Type No. 853 300 ( 5331 01 3)

ITEM NO.180 Providing of Clamping shoe: Suitable to connect 8mm conductor ,quick installation with hexagonal bolts ,11mm dia attaching hole and shall be of Hot dip galvanised . OBO Type No. 319 8 (5325 30 7)

ITEM NO.181 Supply of Galvanised Steel Flat 30X3 mm thick from earth electrode directly in ground as required. Hot Dip GI strip, Cross sectional area of 90mm square. According to DIN EN 50164-2 (VDE 0185 part 202) Meets the requirement of VDE0185/305(IS-IEC 62305) Zinc coating: 500 g/m square (Approx :70 micron coating) Should be tested and use exclusively for lightning protection ,earthing system and ring equipotential bonding. OBO Type No. 5052 DIN 30X3 (5019 34 4)

ITEM NO.182 Supply of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. OBO Type no : 255 A-Fl30 FT(5314 53 4)

ITEM NO.183 Providing of flat conductor holder suitable for FL 50. Installed with 2 hexagonal bolts. OBO Type No. 166 LS 70 ( 5226 570 )

ITEM NO.184 Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. OBO Type No.356 50 ( 2360 05 5 )

ITEM NO.185 Supply of UL listed & CPRI tested maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 ( OBO Type No. 17 3000 CCER)

ITEM NO.186 universal clamp made of SS to connect rod with flat conductor ( OBO Type No. 17 25 RTC).

ITEM NO.187 Earth conductivity enhancing compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested.

ITEM NO.188 Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system (OBO Type No.UFE) .

ITEM NO. 189 Supplying and erecting 20/25mm Ø G.M.air release cock, with necessary G.I. coupling to be fitted on top of Air vessel or on wet riser as per specification No. FF-FFA/ARV DSR 13-8-16

ITEM NO. 190 Supplying and installing DANFOSS make pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification No. FF-FFA/PS DSR 13-8-18

ITEM NO. 191 Supplying and installing gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV DSR 13-7-27

ITEM NO. 192 Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No. FF-FFA/HV DSR 13-8-3

ITEM NO. 193 Supplying fire fighting R.R.L. Hose pipe, 63mm dia,15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL DSR 13-8-6

ITEM NO. 194 Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 mm x 736mm x 736 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour. DSR 13-8-23

ITEM NO. 195 Supplying G.M. branch pipe of 63 mm Ø fitted with 20 mm Ø detachable hexagonal nozzle as per specification No. FFFFA/NZ DSR13-8-10

ITEM NO. 196 Supplying and installing G.I.pipe above ground of ‘C’ class ERW with necessary fittings as per specification no. FF-PP DSR 13-6-5

100mm dia

ITEM NO. 197 Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type conf. To IS 2878 Complete erected with necessary clamp made front 50x6 mm. M. S. flat with nut & bolts grouted in wall complete. CSR 10-2-36

ITEM NO. 198 Supplying and installing, testing, commissioning of BOOSTER pump of 450 LPM at 43.2 m head, 7.00 HP or of suitable HP with suitable stages as per specification no FF-MFP/BP DSR 13-5-1

FLOW RATE- 450 LPM

ITEM NO. 199 Supplying and installing 100 mm dia end line strainer for positive suction as per specification No. FF-VL/ELS DSR 13-7-5

ITEM NO. 200 Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia. as per specification No. FF-VL/BFV DSR 13-7-14

ITEM NO. 201 Supplying and installing double flange NRV of size 100 mm dia as per specification No. FF-VL/NRV DSR 13-7-19

ITEM NO. 202 Supplying and erecting fully automatic star/delta starter suitable for 7.00 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. (Similar to L & T make MK-1 FASD model). DSR 13-5-4

ITEM NO. 203 500 cfm Inline exhaust fan for common Toilet

ITEM NO. 204 400 cfm Inline exhaust fan for common Toilet

ITEM NO. 205 300 cfm Inline exhaust fan for pumproom

ITEM NO. 206 300 cfm Inline fresh air fan for pumproom

ITEM NO. 207 G.I. sheet 0.6mm (24 gauge) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

ITEM NO. 208 Supply, fabrication, installation and testing the Flexible connections constructed of fire resistance flexible double canvas sleeve as per the approved shop drawings.

ITEM NO. 209 Supply, installation and testing of galvanised steel construction Louver dampers within ducts to be provided with suitable ducts lever and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.as per the approved shop drawings and specifications.

ITEM NO. 210 Supply, installation, testing and balancing of Air Grilles without volume control dampers for return/exhaust air in accordance with the approved shop drawings and specifications.

150mmx 150mm toilet exhuast grille