CA NO. GE AF NO.1/GUR-37/2023-24 REPAIR/MAINTENANCE OF SERVICING OF INTERNAL ELECTRIC, POINT WIRING, CEILING FAN , EXHAUST FAN, COPPER STRIPS EARTHING AND ALLIED WORKS FOR LIGHTENING PROTECTION SYSTEM, EARTHING , LIGHENING ARRESTER AND CONNECTED WOR

Amount

Taking down carefully point wiring of any type, size and description (light, fan, socket outlet etc.) including removal of battens, pipes, sockets, switches, ceiling roses, light fittings etc, complete and making good the disturbed surfaces to match with existing, complete all as specified and as directed.

M & L for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 20 mm dia fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete suitable for the following :-

One light/fan point controlled by one on way switch

One socket outlet 05 Amps on the same board

One socket outlet 05 Amps on independent board

One bell/buzzer point controlled by on bell push

One light point controlled by two 2- way switches with cables 1.5 sqmm size.

-Ditto- as per item No. 2.00 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20X12 mm PVC casing-n- copping and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing the specified and directed for the following :-

One light/fan point controlled by one on way switch

One socket outlet 05 Amps on the same board

One socket outlet 05 Amps on independent board

One bell/buzzer point controlled by on bell push

One light point controlled by two 2- way switches with cables 1.5 sqmm size.

-Ditto- as per item No. 4.00 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and as directed.

S&F in replecement of Modular switch, one way 6 Amps , 1 module complete all as specified and as directed.

S&F in replecement of Modular Socket , 6 A-2/3 Pin combined 2 module complete all as specified and as directed.

S&F in replecement of Modular switch socket combination 16 Amps 6 pin 3 module complete all as specified and as directed.

S&F in replecement of Modular switch, one way 16 Amps , 1 module complete all as specified and as directed.

S&F in replecement of Modular Bell push 6 Amps , 1 module complete all as specified and as directed.

S&F in replecement of Modular Fan step Regulator ,120 W-2 module complete all as specified and as directed.

S&F in replecement of switch 2 way 6Amps, 1 Module. Make : Anchor/Cona/Indoasian/Roma.

S&F in replecement of Switch piano, single pole one way 5 Amps 240 volt capacity flush type all as specified. Make : Anchor/Cona/Indoasian/Roma.

S&F in replecement of 3 pin 5 Amps socket flush type multi purpose 2 in 1 type (2 pin and 3 pin) and all as specified and directed. Make : Anchor/Cona/Indoasian/Roma.

S&F in replecement of 5 pin, 5 Amps switch & socket combination flush type multipurpose 2 in 1 ( 2pin & 3 pin) complete all as specified and as directed.

S&F in replecement of Switch piano, single pole one way 16 Amps 240 volt capacity flush type complete all as specified and as directed.

S&F in replecement of 3 pin 15/16 Amps socket flush type multi purpose 2 in 1 type (2 pin and 3 pin) complete all as specified and as directed.

S&F in replecement of 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and as directed.

S&F in replecement of ceiling rose, 5 Amps surface type 240 volts bakelite three terminal complete all as specified and as directed.

S&F in replecement of Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and as directed.

S&F in replecement of electric bell ding dong AC 230 volt single pole complete all as specified and as directed.

S&F in replecement of fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep complete all as specified and as directed.

S&F in replecement of Switch flush type , 05 Amp single pole , two way complete all as specified and as directed.

S&F in replecement of Modular White cover plate with frame for 3 module complete all as specified and as directed.

S&F in replecement of Modular White cover plate with frame for 4 module complete all as specified and as directed.

S&F in replecement of Modular White cover plate with frame for 6 module. Make : Anchor/Cona/Indoasian/Roma.

S&F in replecement of Modular White cover plate with frame for 8 module

Taking down old and unserviceable sub main wiring of any size and description and removable the same from site and making good the disturbed surfaces/portion of walls etc. all as directed.

M&L for concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe 25 mm dia medium grade and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases for conduit including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible multi stranded copper cable as earth continuity conductor in green color all as specified and as directed.Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit.(b) Make disturbed surface good to wall/floors .

M&L for concealed sub main wiring of two run with 06 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe 25 mm dia medium grade and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases for conduit including one run of 6.0 Sqmm single core PVC insulated, FRLS , flexible multi stranded copper cable as earth continuity conductor in green color all as specified and as directed. Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit.(b) Make disturbed surface good to wall/floors .

M&L for sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-n-coping/conduit pipe as per site requirement medium grade and accessories of suitable size and fixed on wall/ceiling including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed.

M&L for sub main wiring of two run with 06 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-n-coping/conduit pipe as per site requirement medium grade and accessories of suitable size and fixed on wall/ceiling including one run of 6.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed.

Taking down main switches, distribution boards etc of any type and capacity along with the existing boards, and removing the same from site and making good the disturbed surfaces/portion of walls etc. all as directed. Note : DB boxes will be maeasured and paid separately in respective of BOQ item

S&F SPN 2 way sheet metal enclosures for flush/surface mounting distribution board Single door, 240 volts without bus bar complete all as specified and as directed.

S&F SPN 4 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F SPN 6 way sheet metal enclosures for flush/surface mounting distribution board single door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F SPN 8 way sheet metal enclosures for flush/surface mounting distribution board single door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F SPN 12 way sheet metal enclosures for flush/surface mounting distribution board single door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F TPN 4 way sheet metal enclosures for flush/surface mounting distribution board single door, 415 volts factory made and tested complete, suitable for mounting MCBs with cable lugs complete all as specified and directed

S&F TPN 06 way sheet metal enclosures for flush/surface mounting distribution board single door, 415 volts factory made and tested complete, suitable for mounting MCBs with cable lugs complete all as specified and directed

S&F TPN 08 way sheet metal enclosures for flush/surface mounting distribution board single door, 415 volts factory made and tested complete, suitable for mounting MCBs with cable lugs complete all as specified and directed

S&F in replacement of MCCB DB double door type TPN upto 4 way vertical type without MCB/MCCB complete all as specified and as directed by Engr-in-charge.

S&F in replacement of MCCB DB double door type TPN upto 8 way vertical type without MCB/MCCB complete all as specified and as directed by Engr-in-charge.

Taking down unsv MCBs from distribution boards etc of any type and capacity , and removing the same from site and making necessary connections complete all as directed. Note : New MCBs will be maeasured and paid separately in respective of BOQ item

S&F in replacement of MCB SP of rating, 06 to 32 Amp,240 volt, 10 KA 'B' Series complete all as specified and as directed.

S&F in replacement of MCB SP of rating, 40 Amp,240 volt, 10 KA 'B' Series complete all as specified and as directed.

S&F in replacement of MCB SNP of rating 06 to 32 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and as directed.

S&F in replacement of MCB SPN of rating 40 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and as directed.

S&F in replacement of MCB SPN of rating 63 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and as directed.

S&F in replacement of MCB TPN of rating 63 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and as directed.

S&F in replacement of MCB TP of rating 63 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and as directed.

S&F in replacement of 40 Amps RCCB A-type (DP-2M) 240 Volt, 50 Hz , 10 KA short circuit capacity and breaking capacity 100 mA complete all as specified and as directed.

S&F in replacement of 63 Amps RCCB A-type (DP-2M) 240 Volt, 50 Hz , 10 KA short circuit capacity and breaking capacity 100 mA complete all as specified and as directed.

Taking down unserviceable MCCBs from MCB DB VTPN board and making necy cable connections complete all as specified and directed .

S&F in replacement of MCCB 3 Pole 415 V. fixed type, 100 Amps with breaking capacity 16 KA complete all as specified and as directed.

S&F in replacement of MCCB 3 Pole 415 V. fixed type, 125 Amps with breaking capacity 16 KA complete all as specified and as directed.

Taking down old rusted and unserviceable metal sunken box of any size and description and removable the same from site and making good the disturbed surfaces/portion of walls etc. all as directed.

M&L in replacement of metal flush box for fixing of switches for 2/3 module as per sample including all finishes all as specified. Make : Anchor/Roma/Legrand.

M&L in replacement of metal flush box for fixing of switches for 4 module as per sample including all finishes all as specified. Make : Anchor/Roma/Legrand.

M&L in replacement of metal flush box for fixing of switches for 6 module as per sample including all finishes all as specified. Make : Anchor/Roma/Legrand.

M&L in replacement of metal flush box for fixing of switches for 8 module as per sample including all finishes all as specified. Make : Anchor/Roma/Legrand.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion

Taking down of serviceable ceiling fans/wall mounted fan/exhaust fans and refixing the same on same position including cleaning and painting after the work is over.

M&L for opening ceiling fan any type & any sweep, cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge with and including provision of insulating material varnishing with good quality varnish including replacement of all unserviceable parts such as safety pin, fan clamp with rubber bush,bearings and twin core flexible copper wire etc complete all as specified and as directed by Engr-in-charge.

M&L for opening Wall fan any type, any make and of any sweep, cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge after providing all required insulating material varnishing with good quality varnish including replacement of all unserviceable minor parts such as safety pin, bearings, rotary switch with thread complete all as specified and as directed by Engineer-in-Charge.

M&L for opening of 400/450 mm sweep exhaust fan any type and any make cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge after providing all required insulating material varnishing with good quality varnish including replacement of all unserviceable minor parts such as safety pin, bearing, bush and capacitors complete all as specified and as directed by Engineer-in-Charge.

M&L for opening of 300 mm sweep exhaust fan any type and any make cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge after providing all required insulating material varnishing with good quality varnish including replacement of all unserviceable minor parts such as safety pin, bearing, bush and capacitors complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix in replacement of copper wound motor suitable for 300/400 mm sweep wall mounted Fan complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of copper wound Fan motor for exhaust Fan metal body 300mm sweep complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of copper wound Fan motor for exhaust Fan metal body 400/450 mm sweep complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of copper wound Fan motor for Ventilating Fan PVC body 200mm sweep with front lock & capacitor complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of copper wound Fan motor for pedastal Fan 400/450 mm sweep complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of gear system suitable for 300/400 mm sweep wall mounted Fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of rotary switch suitable for 300/400 mm sweep wall mounted Fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of PVC body complete suitable for 300/400 mm sweep wall mounted Fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of frame and clamp with rubber complete set suitable for 300/400/450 mm sweep exhaust fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of louvers for metal body 300 mm sweep exhaust fan for kitchen as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply & Fix in replacement of louvers for metal body 400/450 mm sweep exhaust fan for kitchen as per matching to existing complete all as specified and as directed by Engineer- in Charge.

M&L for opening and cleaning of existing kitchen exhaust fan including blades of any type any make with oil and dirt removing solution and refixing back to existing location complete all as specified and as directed by Engineer- in Charge.

Supply and fixing in replacement of anti sucide fan rod 12 mm dia made out of high density mild steel 300mm long as per approved sample.

M&L in replacement of nut and bolt (not less than 2.5 inches) and 0.25 inches dia with suitable size rubber reel for hanging of ceiling fan complete all as specified and directed.

M&L in replacement of PVC canopy of any size and shape suitable for existing ceiling fan make complete all as specified and directed.

M&L in replacement of blades of 1200 mm sweep made of aluminium sutiable for ceiling fans complete all as specified and directed.

Supply and fixing in replacement of fan stator with copper winding as per sample and make the ceiling fan serviceable all as specified and directed

Supply and fixing in replacement of fan stator housing with bearing as per sample and make the ceiling fan serviceable all as specified and directed

Supply and fixing in replacement of ceiling fan hanging clampwith rubber bush complete as per sample all specified and directed

Supply and Fixing in replacement of ceiling fan shaft and make the ceiling fan serviceable complete all as specified and directed.

Supply and fixing in replacement of fan capacitor/condensor 1.5 MFD, 240 volt of ceiling fan/exhaust fan/wall mounted fan complete all as specified and as directed. Make : Tibcon/Havells

Supply and fixing in replacement of fan capacitor/condensor 2.5 MFD, 240 volt of ceiling fan/exhaust fan/wall mounted fan complete all as specified and as directed. Make : Tibcon/Havells

Supply and fixing in replacement of fan capacitor/condensor 3.15 MFD, 240 volt of ceiling fan/exhaust fan/wall mounted fan complete all as specified and as directed. Make : Tibcon/Havells

Supply and fixing in replacement of fan capacitor/condensor 4.0 MFD, 240 volt of exhaust fan complete all as specified and as directed. Make : Tibcon/Havells

Supply and fixing in replacement of Fan blade for wall fan 300/400mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply and fixing in replacement of Fan blade for ventilating fan 200/300mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply and fixing in replacement of Fan blade for metal exhaust fan 300 mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply and fixing in replacement of Fan blade for metal exhaust fan 400/450 mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

M&L for painting to ceiling fan/Exhaust fan any sweep complete, in-situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.complete all as specified and as directed..

Supply and fixing in replacement of hylam sheet round corner of size as required at site, complete all as specified and as directed by Engr-in-Charge. Note:- cost of cuttung of hylam sheet is deemed to be fit in the quoted amount

Supply and fixing in replacement of on wall , Plug and socket in sheet steel enclosure with Single pole & earth , suitable for 20 Amp with providing MCB SP 20 Amp suitable for single phase AC supply complete all as specified and as directed.

Supply and fixing in replacement of switch Modular one module one way 06 Amp complete all as specified and as directed by Engineer-in-charge. Make:- Legrand/crabtree/Simon.

Supply and fixing in replacement of bell switch Modular one module 10 Amp complete all as specified and as directed by Engineer-in-charge. Make:- Make:- Legrand/crabtree/Simon.

Supply and fixing in replacement of switch Modular one module two way 06 Amp complete all as specified and as directed by Engineer-in-charge.Make:- Legrand/Crabtree/Simon.

Supply and fixing in replacement of switch Modular one module one way 16 Amp complete all as specified and as directed by Engineer-in-charge.Make:- Make:- Legrand/crabtree/Simon.

Supply and fixing in replacement of Modular type socket outlet shuttered two module combined 6/16 amps multipurpose complete all as specified and directed by Engineer-in-charge.Make:- Legrand/crabtree/Simon.

Supply and fixing in replacement of Modular type socket outlet shuttered two module 5 pin 6 amps multipurpose complete all as specified and directed by Engineer-in-charge.Make:- Legrand/crabtree/Simon.

Supply and fixing in replacement of Modular Electronic Fan regulator 5 stepped type 02 module complete all as specified and as directed by Engineer-in-charge. Make:- Legrand/crabtree/Simon.

Supply and fixing in replacement of Modular Electronic Fan regulator 4 stepped type 01 module complete all as specified and as directed by Engineer-in-charge. Make:- Legrand/crabtree/Simon.

Supply and fixing in replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. Make : Anchor/Cona/Havells.

Supply and fixing in replacement of 3 pin 05 Amps switch socket combination, box type multipurpose 2 in 1 type (3 pin 5 Amps ) all as specified and directed. Make : Anchor/Cona/Havells.

Supply and fixing in replacement of 3 pin 15 Amps switch socket combination, box type multipurpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified and directed.Make : Anchor/Cona/Havells.

Supply and fixing in replacement of 12 watt ball type LED lamp, 230 volt suitable for recess mounting light fittings. Make:- Havells/Orient/ Bajaj/Philips/CG/Syska

S&F in replacement of 4 ft 18/20 watt Decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly, energy complete all as specified and by Engr-in-charge. Make:- Havells/Orient/ Bajaj/Philips/CG

S&F in replacement of 2 feet 09 W slim LED battern (cool day light) Basic all purpose surface and wall mounted with polycarbonate housing & integrated with electronic driver..Make:- Havells/Orient/ Bajaj/Philips/CG

S&F in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 9W LED Lamp B22 base complete with all accessories as per sample , complete all as specified and as directed by Engr-in-Charge.Make: Havells /Orient/Syska

S&F in replacement 36 W LED recess mounting fitting(2' x 2') CRCA powder coated having polycarbonate diffuser powedered by independent electronic LED driver haing IP 20 protection,CCT 6000 K,230/240 VAC,lumen efficacy > 140 lm/w including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.Make:- Havells/ Philips/ GE/Bajaj

Supply and fixing in replacement of 3 Pin plug top 16 Amps complete all as specified and as diercted by Engineer-in charge.

Supply and fixing in replacement of 3 Pin plug top 6 Amps complete all as specified and as diercted by Engineer-in charge.

Supply and fixing in replacement of of socket type fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep all as specified and directed.

Supply and fixing in replacement of 36 watt FTL fitting with 25 watt LED street light fitting including with suitable size mounting bracket complete all as specified and directed by Engr-in-charge. Make : Havells/Crompton/Bajaj.

supply and fixing in replacement of PVC rawl plug of size 6 mm dia upto 50 mm length as per requirement complete all as specified and specified and directed.

supply and fixing in replacement of thread type dry wall MS screws of size 6 mm dia upto 50 mm length as per requirement complete all as specified and specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1 : 3 : 6 type C1( Using 20 mm graded crushed stone aggregate) for foundation / concrete blocks / earthing chamber / chamber cover complete all as directed by Engineer-in-charge at site.

M& L in replacement of test point terminal block made out of gun metal or phosphorous bronze of size 75x75x25 mm drilled & screwed including 3 hole,8mm dia 25mm long hexagonal head with nuts & washers complete as specified and directed.

S &F in replacemen air temination, single pointed aluminium rod 12mm dia and 300mm long all as specified and directed.

S &F in replacemen air temination, single pointed copper rod 12mm dia and 300mm long all as specified and directed.

S&F in replacement of 50 mm bore GI tubing, light grade galvanized with all fitting and fixed to walls and ceilings or laid in floors for earthing strip protection complete.

S&F in replacement of 15 mm bore GI tubing, medium grade galvanized with all fitting and laid in trenches complete.

S&F in replacement of 15 mm bore GI tubing, medium grade galvanized with all fitting and fixed to walls and ceilings or laid in floors of complete.

S&F in replacement gun-metal, globe or gate valves, with iron wheel head, screwed both ends to iron pipe and fixed to 15 mm bore pipe complete.

S&F in replacement gun-metal, globe or gate valves, with iron wheel head, screwed both ends to iron pipe and fixed to 20 mm bore pipe complete.

M&L for colour coding of earthing pit cover and indication plate with rod with the following colour:- Red for chemical earth pit. Yellow for conventional earth pit. The numbering/marking of earth pit will be in capital black colour and is to be done as directed by Engineer -in- Charge.

M& L For industrial salt for earthing pit recharging all as directed by Engineer in charge

M& L For technical grade Magnisium Sulphate for earthing pit recharging all as directed by Engineer in charge

M & L for testing of earth resistance value of existing earthing pits once in a month with digital type earth tester at different locations of 13 BRD/16 BRD area up to the entire satisfaction of AF personnel & submitting the earth result all as directed. Note : Testing of all earth pits will be carried out on monthly basis and the same will be measured in presence of Air force staff.

Tightening and fixing in position loose hanging copper/aluminium strip of any size on wall or building roof using new insulators of porceline of approved size and fixing existing Aluminium/copper strip on the same as existing.(Insulators will be measured and paid separately against the item in the schedule)

Supply and fix in replacement of Copper Strip of size 20 X 3 .15mm buried/laid in trenches/fixed on wall/tower etc complete all as specified.

Supply and fix in replacement of Copper Strip of size 25 X 3 mm buried/laid in trenches/fixed on wall/tower etc complete all as specified.

Supply and fix in replacement of Copper Strip of size 32 X 6 mm buried/laid in trenches/fixed on wall/tower etc complete all as specified.

Supply and fix in replacement of flexible Copper Strip of size 20x3 mm thickness complete all as specified.

M & L for copper brazing with copper strip/copper rod complete all as specified.

Supply & Fix in replacement of PVC insulater supporter with nut bolts / screws for fixing of copper / aluminium strips / GI strips on walls/PCC blocks etc .

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers , of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of GI strip protected by 40 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement of Aluminium Strip of size 25 X 3 .15mm buried/laid in trenches/fixed on wall/tower etc complete all as specified.

Supply and fix in replacement of GI Strip of size 25 X 3 .15mm buried/laid in trenches/fixed on wall/tower etc complete all as specified.

M& L char coal for earthing pit recharging all as directed by Engineer in charge

M & L for earthing of equipments with copper plate earth electrode 60cmx60cmx3.15 mm thick buried directly in ground (earth pit not less than 3.00 mtr below ground level with top edge of plate not less than 2.25m. below ground level) brazed with copper strip 20x3 mm size 7.0 mtr long and connected to copper strip of any size by means of copper bolts, nuts, check nuts and washers complete all as specified and directed.

Note:- The rated quoted is deemed to the inclusive of the followings:- (a) The excavation and earth work (filling in, ramming in layers, watering etc as directed) in any type of soil for earth pit (pit size 1.20x 1.20x3.0mtr). (b) Perforated GI tubing (ISI marked) light grade 50mm bore 7.0 mtr long for strip protection and watering. (c) Common salt charcoal dust in alternative layers of 15cm, up to 60cm above the top of copper plate all as directed (Salt - 300Kg, Charcoal dust - 500 Kg). (d) Earth chamber of internal size 600mmx600mmx600mm, built in PCC (1:3:6) type C2 bed 15cm thick at bottom, brick work in CM 1:6 upto 45cm over PCC bed and PCC (1:3:6) type C1 coping 15cm above, embedded with MS angle 50mmx50mmx3mm frame work duly painted with anti corrosive bituminous paint, with and including RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with XPM (weight not less than 4Kg per Sqm) having lifting arrangement duly painted in green and making earth pit as directed. (e) On testing, after completion, if the earth resistance < 2 Ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained. (f) GI tubing, bib tap etc for provisioning of continuous water supply at earthing pit will be measured and paid seperately under respective schedule of the contract.

M & L for chemical earthing complete with copper plate earth electrode 90cmx60cmx5 mm thick buried directly in ground (earth pit not less than 4.00 mtr below ground level with top edge of plate not less than 3.25 mtr below ground level) brazed with copper strip 50x6 mm size 7.5 mtr long and connected to copper strip of any size by means of copper bolts, nuts, check nuts and washers complete all as specified and directed.

Note:- The rated quoted is deemed to the inclusive of the followings:- (a) The excavation and earth work (filling in, ramming in layers, watering etc as directed) in any type of soil for earth pit (pit size 1.20x 1.20x4.0mtr). (b) Perforated GI tubing (ISI marked) light grade 80mm bore 7.0 mtr long for strip protection and watering. (c) Common salt charcoal dust in alternative layers of 15cm, up to 90cm above the top of copper plate and one layers of 15cm Magnesium sulphate (MgSo4) all as directed (Salt - 500Kg, Charcoal dust - 1000 Kg & MgSo4 - 150 Kg). (d) Earth chamber of internal size 600mmx600mmx600mm, built in PCC (1:3:6) type C2 bed 15cm thick at bottom, brick work in CM 1:6 upto 45cm over PCC bed and PCC (1:3:6) type C1 coping 15cm above, embedded with MS angle 50mmx50mmx3mm frame work duly painted with anti corrosive bituminous paint, with and including RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with XPM (weight not less than 4Kg per Sqm) having lifting arrangement duly painted in green and making earth pit as directed. (e) On testing, after completion, if the earth resistance <2 ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained. (f) GI tubing, bib tap etc for provisioning of continuous water supply at earthing pit will be measured and paid seperately under respective schedule of the contract.

Supply & Fixing of Nut, M6 (Stainless steel) as per matching/ existing complete all as specified and directed by Engr-in-Charge.

Supply & Fixing of Bolt, M6 x 25, Hex Head (Stainless steel) as per matching/ existing complete all as specified and directed by Engr-in-Charge.

Supply & Fixing washers, M6 x 25, Hex Head (Stainless steel) as per matching/ existing complete all as specified and directed by Engr-in-Charge.

M & L in replacement of testing point box of size 100 x 100 x 50 mm depth as per sample complete all as specified.

M & L in replacement of earhing pit GI funnel as per sample complete all as specified.

M & L in replacement of 15 mm PVC bib tap as per sample complete all as specified.Make : ISI marked.

Taking down and up any type of copper/aluminium strip of any size and type on wall or building roof for execution of misc works on roof and the same has been to be fix after completion of civil work. (Insulators,nut bolts with washers and any type of strip will be measured and paid separately against the item in the schedule)

M&L for painting to test point box of size 100 x 100 x 50 mm depth all as specified and directed

Supply, Installation, Testing and Commissioning in replacement of Waterless Maintenance Free Grounding System Based on Conductive Earthing Electrode and having following specification :-  Dimensions L*D (MM): 3000*80 with 16mm solid conductor (Pure Copper)  Conduction: Non Ionic Movement of Ions,  Multi Point Dissipation Contacts,  Environment: Ph Neutral Internal Material,  Relative Density: 890-990 kg/m3,  3000 times more effective than Bentonite  Electrolytic Corrosion Resistance: >86% reduction in corrosion  Short Circuit Current (Tested): Peak: 40 KA RMS: 22 Kilo Amps for 1 Sec  Mechanical Strength: >Grade 25 Concrete  High Fault Current Test Withstand: 1686 V for 500 ms  Standards: IEEE 80:2000 & BS 7430  Warranty: 5 Years  On testing, after completion, if the earth resistance < 1 ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained. Make: KRATONITE / KE ELEPHANT / ITPC-METCHEM / OBO / ASHLOK

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc. and getting out Hard/dense soil complete.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm complete.

Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

M&L for common burnt clay bricks designation sub class 'B' for stacking for bricks around the earth pits including civil work complete all as specified and directed.

M&L for laying of coarse aggregate(broken stone boulders) 40mm size in continuous bed of thickness 20mm and soft ramming to consolidate the aggregate to form a compact layer of aggregate around Earth pits and carefully demercating the surrounding in length by breadth, to facilitate percolation of rainwater rendering the surface where aggregate are laid, safe for operation during rainly season by naturally facilitating a insulating surface all as specified.

Note:- (a) Any material required to be replaced for complaint rectification other than insulation tape, thimbles and as specified in complaint item shall be measured and paid seperately under respective supply only item. (b) The cost of unit rate per item shall also include the cost of stationery required for recording complaint, complaint slips and its reports as directed by Engineer-in-charge. (c) All the complaint registered (except point wiring / sub-main wiring and connected S&F items) before 0930 Hrs of every day shall be rectified on same day upto 1700 Hrs. Any delay in complaint rectification a penalty shall be recovered @ Rs.100/ per complaint per day. (d) The items supplied by contractor as supply only shall be taken on charge by deptt. (e) All T&P required to electrician deployed by the contractor for complaint rectification shall be provided by the contractor at his own cost. (g) Any disturbed surface during execution of work shall be made good as existing. Nothing extra shall be paid in this respect. The quoted rate are deemed to be included the same cost. (h)The amount of Rs 2,56,885/- against Schedule of Credit on Page No 125 to 126 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

GILL ENGINEERS

Bluemax Associate