SE/GC/TIN/C48/2019-20

Amount

Chipping of plastered surface and roughing the wall and floor surface and clearing the debris from site including cost of all materials, labour, lead, lift, T&P etc. Complete.

Special plastering with C.M. 1:3, with chemical (crack filler paste) 10mm thick including cost of all materials, curing, labour, lead, lift etc., complete.

Supplying and Laying of 25mm PVC pipes as per IS 1239/PART I/90 with necessary specials in the trenches with proper alignment as directed by site engineer including Cost of all materials, lead, lift, labour, transport etc Complete.

Supplying and Laying of 20mm dia PVC Pipe finolex(or) equivalent with necessary Specials including Cost of all materials , lead, lift etc Complete.

Supplying & fixing in position 25mm dia Gun metal gate valve heavy type of approved make & quality conforming to IS Specification including the cost of all materials, labour, lead,lift, T&P, transport etc complete.

Supplying and fixing in position of 15/12mm dia brass chromium plated screw down tap (water Tap) heavy type of approved make & quality conforming to IS Specification including the cost of all materials, labour, lead,lift, T&P etc complete.

Supplying and Laying & fixing of 110mm dia PVC Pipe 6kg/sqcm for sewer line with proper alignment with necessary Specials including Cost of all materials , lead, lift,labour, transport etc Complete.

Supplying and Laying & fixing of 2"dia PVC pipes 6kg/sqcm for waste water line with necessary specials with proper alignment as directed by site engineer including Cost of all materials lead, lift, labour, transport, etc Complete.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour for open PVC light point / fan point (For electronic regulator) (SD-17).

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 75mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD-39).

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box.(SD-133).

Supplying and fixing of 4’ 40w flu. Fitting complete with copper choke and condenser with teak wood round blocks on wall or ceiling with flu. Tube with PVC unsheathed copper leads from terminals to the fitting with tube. (SD 88)

Supply and fixing of 23 CM SL Bracket with fancy glass shade with 11W CFL bulb. (SD 82)

Supplying and fixing of sweep (48") AC ceiling fan with regulator with 300mm down rod on the existing clamps of approved quality of Higher End Havells Crompton/ usha/bajaj including cost of all materials, lead, lift etc complete.(SD-111).

Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only. (S.D-144)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V on 7/20 G.I bearer wire for service connection mains.

Supply and fixing of 2 of 4 Sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade service connection GI pipe of 25mm dia (Class B) bend at both ends with necessary angle iron upright and end supports for mains with including lead, lift, etc., complete.(SD 69)

Supplying of Godrej 6 lever lock for front door including cost of materials, lead, lift, etc., complete.

Supplying and fixing of rain water down fall pipe of 110mm dia PVC pipe 4 Kg/Sq.Cm, including PVC bend, Elbow, clip, screw wherever necessary,cost of all materials lead, lift, labour, transportation etc., complete.

Paving the approved quality of anti skid ceramic tiles of size 305x305x6mm, over a base layer of CM 1:3, 20mm thick pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift etc., complete.

Dadooing the wall with best approved quality glazed tiles of size 300x200x6mm, over a base layer of CM 1:2, 12mm thick pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc., complete.

GST 12% as per Govt. Norms