Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹45.9 L
EMD Value
₹91,760
Closing Date
31 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE SOUTH
NO 1 GEN BHAGAT MARG PUNE 40
8886 SPL REPAIR TO BLDG NO NP 23 SINGLE NURSING OFFR ACCN AT AICTS PUNE UNDER GE SOUTH PUNE
2026_MES_793241_1
8886 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
180 days
GE SOUTH PUNE
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE SOUTH PUNE
₹91,760
Yes
10 Oct 2026
10 Oct 2026
7 Nov 2026
10 Oct 2026
31 Oct 2026
24 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of asbestos cement corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. | 555 | Sqm | - | - |
| - | Dismantiling structural steel work including doors,gates but excluding framed trusses etc all as specified and directed. | 1 | Per Quintal | - | - |
| - | S & F roof sheeting prepainted galvalume aluminium zinc coating 150 gms (AEZ 150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :- The joint between sheets and screws are also fitted with epoxy based chemical sealent) Make : TATA/JSW | 555 | Sqm | - | - |
| - | S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and directed. | 35 | Sqm | - | - |
| - | M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed. | 1,912 | Kg | - | - |
| - | M&L Preparation of New or previously untreated Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed | 100 | Sqm | - | - |
| - | M&L Preparation of Old painted Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint complete all as specified and directed. | 110 | Sqm | - | - |
| - | Taking down steel windows shutter with frame (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and as directed. | 28 | Each | - | - |
| - | S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. | 32 | Sqm | - | - |
| - | S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :-
(a) SP 20048
(b) Glazing clips 19352 | 3.3 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.08 MB
8886TenderDocs.pdf
Tender Documents • 0.62 MB
BOQ_889556.xls
BOQ • 2.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .