WBPWD/SE/SWEC/NIQ65/2024-25

Amount

PART-A [BJRCY Girls Hostel Sabarkone, Taldangra]

SECTION -A Supply of 150mm dia PVC pipes & fittings schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I) standard length of 6 Mtr (Page 13, Item 19(II)A Sanitary & plumbing 2017)

Supply of 150mm Dia PVC strainer of approved make with adater conforming to I.S. 12818 specification . Standard length of 6 Mtr (Page 52, Item 6(IV)A Sanitary & plumbing 2017)

Supply of 150mm Dia Steel cutter piece with socket/CI plug cutter with bottom plug. (Page 53, Item 9 Sanitary & plumbing 2017)

Supplying, fitting and fixing in position 150mm Dia G.I. pipes of TATA make for underground works with all necessary accessories (Page 3, Item 2 Sanitary & plumbing 2017)

Supply, fitting and fixing 150mm Dia G.I. cap at top (Page 54, Item 18 Sanitary & plumbing 2017)

Supply of 32mm Dia PVC pipes & fittimgs schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I). Standard length of 3 Mtr (Page 13, Item 19(III)A Sanitary & plumbing 2017)

Supply of 150mm dia Flange schedule 50 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I) (Page 16, Item 19(III)G Sanitary & plumbing 2017)

Packing the angular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2mm to 5mm or the size approved by the E.I.C. including cost of all materials labour and equipment complete. (Page 55, Item 24 Sanitary & plumbing 2017)

Supply of 150mm heavy duty supporting clamp in two halves made of M.S. flat for holding 50mm N.B. Column pipe (Page 07, Item No-30 W.R.D.D. Schedule rates 2018)

Supplying of 50mm NB heavy duty supporting clamps in two halves made of MS flats for holding 80mm NB column pipes (Page 08, Item No-32 W.R.D.D. Schedule rates 2018)

Supply of 50mm Dia galvanised iron socket with I.S.I mark. (Page 103, Item 2 Sanitary & plumbing 2017)

Supply of 50mm Dia long screw (150mm long) (Page 108, Item 12 Sanitary & plumbing 2017)

Supply of 50mm Dia G.I. plain equal elbow of approved brand and make. (Page 105, Item 7 Sanitary & plumbing 2017)

Supplying of 50 mm Dia Medium quality G.I pipe (Page 102, Item 1 Sanitary & plumbing 2017)

Supply of 50 mm Dia G.I. plain tee of approved brand and make (Page 106, Item 8 Sanitary & plumbing 2017)

Supply of 50mm Dia G.I. bend. (Page 105, Item 6 Sanitary & plumbing 2017)

Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete lowering of pipes, strainers, blind pipes etc. complete. (b) For depth upto 250 meter for 150mm dia. Tube well with top enlargement of 250mm dia. (upto 50 metre). (i) First 50 metre. (Page 50, Item 2(b)(i) Sanitary & plumbing 2017)

Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete lowering of pipes, strainers, blind pipes etc. complete. (b) For depth upto 250 meter for 150mm dia. Tube well with top enlargement of 250mm dia. (upto 50 metre). (ii) Next 50 metre. (Page 50, Item 2(b)(ii) Sanitary & plumbing 2017)

Labour charges for lowering of pipe, strainers, blank pipe etc. and fitting, fixing the same including cutting, threading where necessary complete including bucket washing and other incidental works in this connection. (iii) 150mm dia G.I. Housing pipe. (Page 16, Item No-2 W.R.D.D. Schedule rates 2018)

Washing and developing tube well with air compressor pump and engine for 8(eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. (Page 55, Item 20 Sanitary & plumbing 2017)

Charges of mobilisation of drilling equipments, tools and plants etc. and transportation of departmental materials from sub-divisional store to work site and returning excess departmental materials if any, to sub-divisional store after completion of work. (Page 17, Item No-6 W.R.D.D. Schedule rates 2018)

Supplying & Installation of 1 phase electro motor pump set suitable for solar operation covering 1 years warranty for the following condition including loading-unloading and transportation etc. 1 HP ISI marked 1 phase 230 V pump-motor set having discharge at required head as bellows: (ii) Submersible pump-motor set for LDTW ISI marked as per IS:8304 with flow range of 53-77 m^3/ day at 30-44 mtrs head. (WRIDD solar S/n-9-c-iii dated- 16/07/2018)

Supply, transport, installation of Power Conditioning Unit including MPPT, Data Logger and IP54 enclosed inverter unit qualifying IEC61683- Enviroment standard, safety standard suitable for 1 phase AC motor, IGBT based high voltage switching inverterwith MPPt technology, to take care the variation of sunlight and will be suitably mounted inside the metal encloser. Inverter should have protection against dry run, over current, under current, over voltage, under voltage, short circuit etc. System should be able to run at low sunshine and minimum 7-8 hours a day to run should be possible during normal sunshine condition. Inverter should have option to auto start for any short trip off due to low light/cloudly situation except for dry run. Inverter should be provided with a display to show the various parameters by the user such as voltage, current, solar panel dc voltage, inverter IGBT temperature, output AC voltage, output frequency, pump flow (direct or calculated metod), irradiation etc. The system should be capable to store the data at a set interval and transfer it in a pen drive through USB port. It should also monitor and save total run time total water pumped etc. There for 1 HP capacity motor pump set. (WRIDD solar S/n-4 dated- 16/07/2018)

Supply, transport, installation and commissioning of MNRE/IEC approved solar module of multicrystaline cell with minimum efficiency of 15 % and fill factor more than 70% laminated between sheet of Ethylene Vinyl Acetate (EVA) and high transmissivity 3.2mm tempered glass, framed in anodized aluminium frame. The power output of individual PV modules in PV array, under STC, should be minimum 300Wp with adequate provision for tolerances. Modules supplied with the SPV system should have certificate as per IEC 61215 specification or equivalent national or international standard. Modules must qualify to IEC 61730 part I and part II for safety qualification testing and salt mist corrosion testing as per IEC 61701/IS 61701 and having warranty for uotput wattage, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Necessary test certificate should be supplied. (c) for1 HP grid system solar water pumping system (with multicrystalline PERC/bifacial spv module of Tata,Panasonic or Lubi solar- 1590 Wp with 320/325/330/335 Wp SPV panel.

Supplying, transport, installation of weather proof manual tracking structure made of MS channels, angles and pipes etc. duly IS marked channels and angles (IS 808) to hold SPV module with MS heavy duty pipe not less than 125mm as per IS 1239 and plate of IS 226. Structure like canopy supported with aRCC column to be installed to limit land requirement with a height of placement of panel for free human movement and natural air cooling will be happening to get the maximum efficiency from the modules. This structure should be designed considering all the possible loads on the solar panels and on the structure itself including wind load with basic wind velocity 150 km/hr. The steel structure of suitable size is to be protected with minimum 80 micron galvanization and provided with dual axis manual tracking arrangement three times in a day and seasonal tilting are to be provided to face the sun optimally. The weight of module structure having 6 module structure of 320/325/330/335 Wp SPV panels should not be less that 191 kg. (WRIDD solar S/n-2i dated- 16/07/2018)

Foundation of module mounting structure suitable and stable reinforced cement concrete foundation for dual axis manual tracking SPV module structure as per approved drawing (b) for six module structure having maximum capacity of 1980 Wp. (WRIDD solar S/n-3 dated- 16/07/2018)

Foundation of water tank mounting structure suitable for 2000 lts water tank at 2.5 mtr hight from the base level with table reinforced cement concrete foundation

Supplying, fitting and fixing of UV rated Copper cable laid inside HDPE conduit and other accessories as per following with necessary connection with the solar PV modules, MPPT, etc (i) 4.0 Sq.mm single core multi studs-10 mtrs (minimum), (ii) 6.0 Sq.mm single core multi studs-5 mtrs (minimum), (iii) Lugs, HDPE pipes, flexible pipes, saddle, cable tie etc. For 5 HP per structure. (WRIDD solar S/n-5 dated- 16/07/2018)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe including excavation of soil for installation of each electrode and filling and ramming and (hot dip) MS flat on wall/floor with GI saddle as requiredand connection to equipments incl. drilling holes with bolts, nuts, washer etc. complete. (WRIDD solar S/n-6 dated- 16/07/2018)

Supplying, fitting and fixing conductor air terminal made 20mm dia 1000mm long GI pipe (ISI medium) having 5nos. Discharge prongs of 4 SWG GI (hot dip) wire at top duly soldered with 7/16 standard GI (hot dip) wire (4 mtr. Long), 20mm dia X 125mm long galvanized bolt, double nut, doublr washer including socketing at both end standard GI (hot dip) wire by crimping sockets/thimbles and S&F 40mm dia GI pipe (ISI medium) protection (3 mtr. long) to be filled with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.65 mtr. (WRIDD solar S/n-8 dated- 16/07/2018)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 1000 litre capacity (P-37, It-6) with establish on civil construction, consisting earth work in excavation of foundation trenches in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom,(payment to be made on measurement of finished quantity), single BFS, Ordinary cement concrete of 1:1.5:3 ratio with grated stonechips, 125mm thick brick work with 1st class bricks in; cement mortal (1:4), Net cement panning, incl. supplying, fitting and fixing of 80mm dia. PVC pipes of approved make (medium duty) conforming to ASTMD-1785 and complete in all respect as per drawing & direction.

Labour for punching hole in plastic water storage tank upto 50 mm dia. (P-38, It-13)

Labour for hoisting plastic water storage tank (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 2 nd story from G.L (P-37, It-10)

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). (P- 6, It-7 [a])

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

(a) For Exposed Work PVC Pipes (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Socket (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Elbow (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Tee (Dia) 15 mm

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, C.I. heavy brackets with two coats of approved paint. (i) 600 mm X 450 mm X 200 mm

Supplying, fitting and fixing pedestal of approved make for wash basin (white)

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 50 mm dia (P-4 , It-4)

Supplying fitting fixing fabricated GI Kiosk Box one side openable of size 1000mm X 600mm X 650mm mounted by 4 nos legs and frame made of GI angle 65 X 65 X 6mm. All sides are cover with 3mm GI sheet on the frane of GI angle 25 X 25 X 3mm with back side cover made of 1.5mm thick GI sheet and providing GI channel door made of 25 X 25 X 3mm GI channel inside the box for fitting the electrical equipment with locking arrangement.

Testing and commissioning of the scheme after completion of all works. (WRIDD solar S/n-10 dated- 16/07/2018)

Display board of the work as per E.I.C. incharge.

SECTION -B SITC of Automatic RO water purifier Machine with Uv protection and TDS controller on wall has a high purification capacity of 80-100 L/hr , Max duty cycle per day 500 LPD with filter change alarm for enhanced safety, Durable Stainless steel body. Dimension[ 505(L)*360 (W)*746(H)] code 11079 (Make: Kent/Bluestar/LG)

SITC of Automatic Water cooling machine of double tap (One for normal water other for cold water) of 40 liter capacity. Make: Blue Star

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand: Polycab/Finolex/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. nency fittings as required

i) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket, 16A Modular type switch, without plug top, 16A switch type SP MCB on 4 Module GI Modular type switch board with 4 Module top cover plate (Brand approved by EIC) flushed in wall incl. S & F switch board and top cover plate and making necessary connections as required

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes.

Shed and protection cell by fabricated G.I. angle strips with net covering and shed over the top with sheet

SECTION-C SITC of Automatic Sanitary Napkin Vending Machine on wall has a capacity of 100 nos pads (230V, 50Hz), having 1.2mm thick powder coated MS enclosure (23*6*31 inch) H*W*L of AVM100 weight approx 18kg. Coin accepted INR 1, 2 & 5 (customisable)

SITC of Automatic Sanitary Napkin Incinerator/Dispoal Machine on wall has a capacity ranging from 100 to 250 nos pads; capacity/cycle: 7-8 pads (230V, 50Hz electric supply), having 1.2mm thick CRCA steel enclosure (16*8.5*10 inch) H*W*L of INC100 weight approx 10kg. Internal housing: 4mm insulation, auto cut-off system with MCB protection, Heater:1000 watt, insulated magnetic doors with total air tight cabinets, Smoke outlet: Top by steel pipe 1.2m comes free with the machine

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand: Polycab/Finolex/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. nency fittings as required

i) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket, 16A Modular type switch, without plug top, 16A switch type SP MCB on 4 Module GI Modular type switch board with 4 Module top cover plate (Brand approved by EIC) flushed in wall incl. S & F switch board and top cover plate and making necessary connections as required

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes.

Supply of leak proof M/L/XL/ extra large super hygine sanitary napkin with fast absorvance.( whisper,stayfree,go girl,nine,Pari)

PART-B [BJRCY Girls Hostel Haludkanali, Ranibandh ]

Supply of 150mm dia PVC pipes & fittings schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I) standard length of 6 Mtr (Page 13, Item 19(II)A Sanitary & plumbing 2017)

Supply of 150mm Dia PVC strainer of approved make with adater conforming to I.S. 12818 specification . Standard length of 6 Mtr (Page 52, Item 6(IV)A Sanitary & plumbing 2017)

Supply of 150mm Dia Steel cutter piece with socket/CI plug cutter with bottom plug. (Page 53, Item 9 Sanitary & plumbing 2017)

Supplying, fitting and fixing in position 150mm Dia G.I. pipes of TATA make for underground works with all necessary accessories (Page 3, Item 2 Sanitary & plumbing 2017)

Supply, fitting and fixing 150mm Dia G.I. cap at top (Page 54, Item 18 Sanitary & plumbing 2017)

Supply of 32mm Dia PVC pipes & fittimgs schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I). Standard length of 3 Mtr (Page 13, Item 19(III)A Sanitary & plumbing 2017)

Supply of 150mm dia Flange schedule 50 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I) (Page 16, Item 19(III)G Sanitary & plumbing 2017)

Packing the angular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2mm to 5mm or the size approved by the E.I.C. including cost of all materials labour and equipment complete. (Page 55, Item 24 Sanitary & plumbing 2017)

Supply of 150mm heavy duty supporting clamp in two halves made of M.S. flat for holding 50mm N.B. Column pipe (Page 07, Item No-30 W.R.D.D. Schedule rates 2018)

Supplying of 50mm NB heavy duty supporting clamps in two halves made of MS flats for holding 80mm NB column pipes (Page 08, Item No-32 W.R.D.D. Schedule rates 2018)

Supply of 50mm Dia galvanised iron socket with I.S.I mark. (Page 103, Item 2 Sanitary & plumbing 2017)

Supply of 50mm Dia long screw (150mm long) (Page 108, Item 12 Sanitary & plumbing 2017)

Supply of 50mm Dia G.I. plain equal elbow of approved brand and make. (Page 105, Item 7 Sanitary & plumbing 2017)

Supplying of 50 mm Dia Medium quality G.I pipe (Page 102, Item 1 Sanitary & plumbing 2017)

Supply of 50 mm Dia G.I. plain tee of approved brand and make (Page 106, Item 8 Sanitary & plumbing 2017)

Supply of 50mm Dia G.I. bend. (Page 105, Item 6 Sanitary & plumbing 2017)

Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete lowering of pipes, strainers, blind pipes etc. complete. (b) For depth upto 250 meter for 150mm dia. Tube well with top enlargement of 250mm dia. (upto 50 metre). (i) First 50 metre. (Page 50, Item 2(b)(i) Sanitary & plumbing 2017)

Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete lowering of pipes, strainers, blind pipes etc. complete. (b) For depth upto 250 meter for 150mm dia. Tube well with top enlargement of 250mm dia. (upto 50 metre). (ii) Next 50 metre. (Page 50, Item 2(b)(ii) Sanitary & plumbing 2017)

Labour charges for lowering of pipe, strainers, blank pipe etc. and fitting, fixing the same including cutting, threading where necessary complete including bucket washing and other incidental works in this connection. (iii) 150mm dia G.I. Housing pipe. (Page 16, Item No-2 W.R.D.D. Schedule rates 2018)

Washing and developing tube well with air compressor pump and engine for 8(eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. (Page 55, Item 20 Sanitary & plumbing 2017)

Charges of mobilisation of drilling equipments, tools and plants etc. and transportation of departmental materials from sub-divisional store to work site and returning excess departmental materials if any, to sub-divisional store after completion of work. (Page 17, Item No-6 W.R.D.D. Schedule rates 2018)

Supplying & Installation of 1 phase electro motor pump set suitable for solar operation covering 1 years warranty for the following condition including loading-unloading and transportation etc. 1 HP ISI marked 1 phase 230 V pump-motor set having discharge at required head as bellows: (ii) Submersible pump-motor set for LDTW ISI marked as per IS:8304 with flow range of 53-77 m^3/ day at 30-44 mtrs head. (WRIDD solar S/n-9-c-iii dated- 16/07/2018)

Supply, transport, installation of Power Conditioning Unit including MPPT, Data Logger and IP54 enclosed inverter unit qualifying IEC61683- Enviroment standard, safety standard suitable for 1 phase AC motor, IGBT based high voltage switching inverterwith MPPt technology, to take care the variation of sunlight and will be suitably mounted inside the metal encloser. Inverter should have protection against dry run, over current, under current, over voltage, under voltage, short circuit etc. System should be able to run at low sunshine and minimum 7-8 hours a day to run should be possible during normal sunshine condition. Inverter should have option to auto start for any short trip off due to low light/cloudly situation except for dry run. Inverter should be provided with a display to show the various parameters by the user such as voltage, current, solar panel dc voltage, inverter IGBT temperature, output AC voltage, output frequency, pump flow (direct or calculated metod), irradiation etc. The system should be capable to store the data at a set interval and transfer it in a pen drive through USB port. It should also monitor and save total run time total water pumped etc. There for 1 HP capacity motor pump set. (WRIDD solar S/n-4 dated- 16/07/2018)

Supply, transport, installation and commissioning of MNRE/IEC approved solar module of multicrystaline cell with minimum efficiency of 15 % and fill factor more than 70% laminated between sheet of Ethylene Vinyl Acetate (EVA) and high transmissivity 3.2mm tempered glass, framed in anodized aluminium frame. The power output of individual PV modules in PV array, under STC, should be minimum 300Wp with adequate provision for tolerances. Modules supplied with the SPV system should have certificate as per IEC 61215 specification or equivalent national or international standard. Modules must qualify to IEC 61730 part I and part II for safety qualification testing and salt mist corrosion testing as per IEC 61701/IS 61701 and having warranty for uotput wattage, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Necessary test certificate should be supplied. (c) for1.5 HP grid system solar water pumping system (with multicrystalline PERC/bifacial spv module of Tata,Panasonic or Lubi solar- 1590 Wp with 320/325/330/335 Wp SPV panel.

Supplying, transport, installation of weather proof manual tracking structure made of MS channels, angles and pipes etc. duly IS marked channels and angles (IS 808) to hold SPV module with MS heavy duty pipe not less than 125mm as per IS 1239 and plate of IS 226. Structure like canopy supported with aRCC column to be installed to limit land requirement with a height of placement of panel for free human movement and natural air cooling will be happening to get the maximum efficiency from the modules. This structure should be designed considering all the possible loads on the solar panels and on the structure itself including wind load with basic wind velocity 150 km/hr. The steel structure of suitable size is to be protected with minimum 80 micron galvanization and provided with dual axis manual tracking arrangement three times in a day and seasonal tilting are to be provided to face the sun optimally. The weight of module structure having 6 module structure of 320/325/330/335 Wp SPV panels should not be less that 191 kg. (WRIDD solar S/n-2i dated- 16/07/2018)

Foundation of module mounting structure suitable and stable reinforced cement concrete foundation for dual axis manual tracking SPV module structure as per approved drawing (b) for six module structure having maximum capacity of 1980 Wp. (WRIDD solar S/n-3 dated- 16/07/2018)

Foundation of water tank mounting structure suitable for 2000 lts water tank at 2.5 mtr hight from the base level with table reinforced cement concrete foundation

Supplying, fitting and fixing of UV rated Copper cable laid inside HDPE conduit and other accessories as per following with necessary connection with the solar PV modules, MPPT, etc (i) 4.0 Sq.mm single core multi studs-10 mtrs (minimum), (ii) 6.0 Sq.mm single core multi studs-5 mtrs (minimum), (iii) Lugs, HDPE pipes, flexible pipes, saddle, cable tie etc. For 5 HP per structure. (WRIDD solar S/n-5 dated- 16/07/2018)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe including excavation of soil for installation of each electrode and filling and ramming and (hot dip) MS flat on wall/floor with GI saddle as requiredand connection to equipments incl. drilling holes with bolts, nuts, washer etc. complete. (WRIDD solar S/n-6 dated- 16/07/2018)

Supplying, fitting and fixing conductor air terminal made 20mm dia 1000mm long GI pipe (ISI medium) having 5nos. Discharge prongs of 4 SWG GI (hot dip) wire at top duly soldered with 7/16 standard GI (hot dip) wire (4 mtr. Long), 20mm dia X 125mm long galvanized bolt, double nut, doublr washer including socketing at both end standard GI (hot dip) wire by crimping sockets/thimbles and S&F 40mm dia GI pipe (ISI medium) protection (3 mtr. long) to be filled with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.65 mtr. (WRIDD solar S/n-8 dated- 16/07/2018)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 1000 litre capacity (P-37, It-6) with establish on civil construction, consisting earth work in excavation of foundation trenches in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom,(payment to be made on measurement of finished quantity), single BFS, Ordinary cement concrete of 1:1.5:3 ratio with grated stonechips, 125mm thick brick work with 1st class bricks in; cement mortal (1:4), Net cement panning, incl. supplying, fitting and fixing of 80mm dia. PVC pipes of approved make (medium duty) conforming to ASTMD-1785 and complete in all respect as per drawing & direction.

Labour for punching hole in plastic water storage tank upto 50 mm dia. (P-38, It-13)

Labour for hoisting plastic water storage tank (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 2 nd story from G.L (P-37, It-10)

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). (P- 6, It-7 [a])

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

(a) For Exposed Work PVC Pipes (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Socket (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Elbow (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Tee (Dia) 15 mm

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, C.I. heavy brackets with two coats of approved paint. (i) 600 mm X 450 mm X 200 mm

Supplying, fitting and fixing pedestal of approved make for wash basin (white)

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 50 mm dia (P-4 , It-4)

Supplying fitting fixing fabricated GI Kiosk Box one side openable of size 1000mm X 600mm X 650mm mounted by 4 nos legs and frame made of GI angle 65 X 65 X 6mm. All sides are cover with 3mm GI sheet on the frane of GI angle 25 X 25 X 3mm with back side cover made of 1.5mm thick GI sheet and providing GI channel door made of 25 X 25 X 3mm GI channel inside the box for fitting the electrical equipment with locking arrangement.

Testing and commissioning of the scheme after completion of all works. (WRIDD solar S/n-10 dated- 16/07/2018)

Display board of the work as per E.I.C. incharge.

SECTION-B SITC of Automatic RO water purifier Machine with Uv protection and TDS controller on wall has a high purification capacity of 80-100 L/hr , Max duty cycle per day 500 LPD with filter change alarm for enhanced safety, Durable Stainless steel body. Dimension[ 505(L)*360 (W)*746(H)] code 11079 (Make: Kent/Bluestar/LG)

SITC of Automatic Water cooling machine of double tap (One for normal water other for cold water) of 40 liter capacity. Make: Blue Star

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand: Polycab/Finolex/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. nency fittings as required

i) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket, 16A Modular type switch, without plug top, 16A switch type SP MCB on 4 Module GI Modular type switch board with 4 Module top cover plate (Brand approved by EIC) flushed in wall incl. S & F switch board and top cover plate and making necessary connections as required

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes.

Shed and protection cell by fabricated G.I. angle strips with net covering and shed over the top with sheet

SECTION-C SITC of Automatic Sanitary Napkin Vending Machine on wall has a capacity of 100 nos pads (230V, 50Hz), having 1.2mm thick powder coated MS enclosure (23*6*31 inch) H*W*L of AVM100 weight approx 18kg. Coin accepted INR 1, 2 & 5 (customisable)

SITC of Automatic Sanitary Napkin Incinerator/Dispoal Machine on wall has a capacity ranging from 100 to 250 nos pads; capacity/cycle: 7-8 pads (230V, 50Hz electric supply), having 1.2mm thick CRCA steel enclosure (16*8.5*10 inch) H*W*L of INC100 weight approx 10kg. Internal housing: 4mm insulation, auto cut-off system with MCB protection, Heater:1000 watt, insulated magnetic doors with total air tight cabinets, Smoke outlet: Top by steel pipe 1.2m comes free with the machine

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand: Polycab/Finolex/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. nency fittings as required

i) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket, 16A Modular type switch, without plug top, 16A switch type SP MCB on 4 Module GI Modular type switch board with 4 Module top cover plate (Brand approved by EIC) flushed in wall incl. S & F switch board and top cover plate and making necessary connections as required

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes.

Supply of leak proof M/L/XL/ extra large super hygine sanitary napkin with fast absorvance.( whisper,stayfree,go girl,nine,Pari)

PART-C [BJRCY Boy's Hostel Bagdiha, Indpur ]

SECTION -A Supply of 150mm dia PVC pipes & fittings schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I) standard length of 6 Mtr (Page 13, Item 19(II)A Sanitary & plumbing 2017)

Supply of 150mm Dia PVC strainer of approved make with adater conforming to I.S. 12818 specification . Standard length of 6 Mtr (Page 52, Item 6(IV)A Sanitary & plumbing 2017)

Supply of 150mm Dia Steel cutter piece with socket/CI plug cutter with bottom plug. (Page 53, Item 9 Sanitary & plumbing 2017)

Supplying, fitting and fixing in position 150mm Dia G.I. pipes of TATA make for underground works with all necessary accessories (Page 3, Item 2 Sanitary & plumbing 2017)

Supply, fitting and fixing 150mm Dia G.I. cap at top (Page 54, Item 18 Sanitary & plumbing 2017)

Supply of 32mm Dia PVC pipes & fittimgs schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I). Standard length of 3 Mtr (Page 13, Item 19(III)A Sanitary & plumbing 2017)

Supply of 150mm dia Flange schedule 50 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I) (Page 16, Item 19(III)G Sanitary & plumbing 2017)

Packing the angular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2mm to 5mm or the size approved by the E.I.C. including cost of all materials labour and equipment complete. (Page 55, Item 24 Sanitary & plumbing 2017)

Supply of 150mm heavy duty supporting clamp in two halves made of M.S. flat for holding 50mm N.B. Column pipe (Page 07, Item No-30 W.R.D.D. Schedule rates 2018)

Supplying of 50mm NB heavy duty supporting clamps in two halves made of MS flats for holding 80mm NB column pipes (Page 08, Item No-32 W.R.D.D. Schedule rates 2018)

Supply of 50mm Dia galvanised iron socket with I.S.I mark. (Page 103, Item 2 Sanitary & plumbing 2017)

Supply of 50mm Dia long screw (150mm long) (Page 108, Item 12 Sanitary & plumbing 2017)

Supply of 50mm Dia G.I. plain equal elbow of approved brand and make. (Page 105, Item 7 Sanitary & plumbing 2017)

Supplying of 50 mm Dia Medium quality G.I pipe (Page 102, Item 1 Sanitary & plumbing 2017)

Supply of 50 mm Dia G.I. plain tee of approved brand and make (Page 106, Item 8 Sanitary & plumbing 2017)

Supply of 50mm Dia G.I. bend. (Page 105, Item 6 Sanitary & plumbing 2017)

Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete lowering of pipes, strainers, blind pipes etc. complete. (b) For depth upto 250 meter for 150mm dia. Tube well with top enlargement of 250mm dia. (upto 50 metre). (i) First 50 metre. (Page 50, Item 2(b)(i) Sanitary & plumbing 2017)

Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete lowering of pipes, strainers, blind pipes etc. complete. (b) For depth upto 250 meter for 150mm dia. Tube well with top enlargement of 250mm dia. (upto 50 metre). (ii) Next 50 metre. (Page 50, Item 2(b)(ii) Sanitary & plumbing 2017)

Labour charges for lowering of pipe, strainers, blank pipe etc. and fitting, fixing the same including cutting, threading where necessary complete including bucket washing and other incidental works in this connection. (iii) 150mm dia G.I. Housing pipe. (Page 16, Item No-2 W.R.D.D. Schedule rates 2018)

Washing and developing tube well with air compressor pump and engine for 8(eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. (Page 55, Item 20 Sanitary & plumbing 2017)

Charges of mobilisation of drilling equipments, tools and plants etc. and transportation of departmental materials from sub-divisional store to work site and returning excess departmental materials if any, to sub-divisional store after completion of work. (Page 17, Item No-6 W.R.D.D. Schedule rates 2018)

Supplying & Installation of 1 phase electro motor pump set suitable for solar operation covering 1 years warranty for the following condition including loading-unloading and transportation etc. 1 HP ISI marked 1 phase 230 V pump-motor set having discharge at required head as bellows: (ii) Submersible pump-motor set for LDTW ISI marked as per IS:8304 with flow range of 53-77 m^3/ day at 30-44 mtrs head. (WRIDD solar S/n-9-c-iii dated- 16/07/2018)

Supply, transport, installation of Power Conditioning Unit including MPPT, Data Logger and IP54 enclosed inverter unit qualifying IEC61683- Enviroment standard, safety standard suitable for 1 phase AC motor, IGBT based high voltage switching inverterwith MPPt technology, to take care the variation of sunlight and will be suitably mounted inside the metal encloser. Inverter should have protection against dry run, over current, under current, over voltage, under voltage, short circuit etc. System should be able to run at low sunshine and minimum 7-8 hours a day to run should be possible during normal sunshine condition. Inverter should have option to auto start for any short trip off due to low light/cloudly situation except for dry run. Inverter should be provided with a display to show the various parameters by the user such as voltage, current, solar panel dc voltage, inverter IGBT temperature, output AC voltage, output frequency, pump flow (direct or calculated metod), irradiation etc. The system should be capable to store the data at a set interval and transfer it in a pen drive through USB port. It should also monitor and save total run time total water pumped etc. There for 1 HP capacity motor pump set. (WRIDD solar S/n-4 dated- 16/07/2018)

Supply, transport, installation and commissioning of MNRE/IEC approved solar module of multicrystaline cell with minimum efficiency of 15 % and fill factor more than 70% laminated between sheet of Ethylene Vinyl Acetate (EVA) and high transmissivity 3.2mm tempered glass, framed in anodized aluminium frame. The power output of individual PV modules in PV array, under STC, should be minimum 300Wp with adequate provision for tolerances. Modules supplied with the SPV system should have certificate as per IEC 61215 specification or equivalent national or international standard. Modules must qualify to IEC 61730 part I and part II for safety qualification testing and salt mist corrosion testing as per IEC 61701/IS 61701 and having warranty for uotput wattage, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Necessary test certificate should be supplied. (c) for1 HP grid system solar water pumping system (with multicrystalline PERC/bifacial spv module of Tata,Panasonic or Lubi solar- 1590 Wp with 320/325/330/335 Wp SPV panel.

Supplying, transport, installation of weather proof manual tracking structure made of MS channels, angles and pipes etc. duly IS marked channels and angles (IS 808) to hold SPV module with MS heavy duty pipe not less than 125mm as per IS 1239 and plate of IS 226. Structure like canopy supported with aRCC column to be installed to limit land requirement with a height of placement of panel for free human movement and natural air cooling will be happening to get the maximum efficiency from the modules. This structure should be designed considering all the possible loads on the solar panels and on the structure itself including wind load with basic wind velocity 150 km/hr. The steel structure of suitable size is to be protected with minimum 80 micron galvanization and provided with dual axis manual tracking arrangement three times in a day and seasonal tilting are to be provided to face the sun optimally. The weight of module structure having 6 module structure of 320/325/330/335 Wp SPV panels should not be less that 191 kg. (WRIDD solar S/n-2i dated- 16/07/2018)

Foundation of module mounting structure suitable and stable reinforced cement concrete foundation for dual axis manual tracking SPV module structure as per approved drawing (b) for six module structure having maximum capacity of 1980 Wp. (WRIDD solar S/n-3 dated- 16/07/2018)

Foundation of water tank mounting structure suitable for 2000 lts water tank at 2.5 mtr hight from the base level with table reinforced cement concrete foundation

Supplying, fitting and fixing of UV rated Copper cable laid inside HDPE conduit and other accessories as per following with necessary connection with the solar PV modules, MPPT, etc (i) 4.0 Sq.mm single core multi studs-10 mtrs (minimum), (ii) 6.0 Sq.mm single core multi studs-5 mtrs (minimum), (iii) Lugs, HDPE pipes, flexible pipes, saddle, cable tie etc. For 5 HP per structure. (WRIDD solar S/n-5 dated- 16/07/2018)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe including excavation of soil for installation of each electrode and filling and ramming and (hot dip) MS flat on wall/floor with GI saddle as requiredand connection to equipments incl. drilling holes with bolts, nuts, washer etc. complete. (WRIDD solar S/n-6 dated- 16/07/2018)

Supplying, fitting and fixing conductor air terminal made 20mm dia 1000mm long GI pipe (ISI medium) having 5nos. Discharge prongs of 4 SWG GI (hot dip) wire at top duly soldered with 7/16 standard GI (hot dip) wire (4 mtr. Long), 20mm dia X 125mm long galvanized bolt, double nut, doublr washer including socketing at both end standard GI (hot dip) wire by crimping sockets/thimbles and S&F 40mm dia GI pipe (ISI medium) protection (3 mtr. long) to be filled with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.65 mtr. (WRIDD solar S/n-8 dated- 16/07/2018)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 1000 litre capacity (P-37, It-6) with establish on civil construction, consisting earth work in excavation of foundation trenches in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom,(payment to be made on measurement of finished quantity), single BFS, Ordinary cement concrete of 1:1.5:3 ratio with grated stonechips, 125mm thick brick work with 1st class bricks in; cement mortal (1:4), Net cement panning, incl. supplying, fitting and fixing of 80mm dia. PVC pipes of approved make (medium duty) conforming to ASTMD-1785 and complete in all respect as per drawing & direction.

Labour for punching hole in plastic water storage tank upto 50 mm dia. (P-38, It-13)

Labour for hoisting plastic water storage tank (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 2 nd story from G.L (P-37, It-10)

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). (P- 6, It-7 [a])

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

(a) For Exposed Work PVC Pipes (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Socket (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Elbow (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Tee (Dia) 15 mm

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, C.I. heavy brackets with two coats of approved paint. (i) 600 mm X 450 mm X 200 mm

Supplying, fitting and fixing pedestal of approved make for wash basin (white)

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 50 mm dia (P-4 , It-4)

Supplying fitting fixing fabricated GI Kiosk Box one side openable of size 1000mm X 600mm X 650mm mounted by 4 nos legs and frame made of GI angle 65 X 65 X 6mm. All sides are cover with 3mm GI sheet on the frane of GI angle 25 X 25 X 3mm with back side cover made of 1.5mm thick GI sheet and providing GI channel door made of 25 X 25 X 3mm GI channel inside the box for fitting the electrical equipment with locking arrangement.

Testing and commissioning of the scheme after completion of all works. (WRIDD solar S/n-10 dated- 16/07/2018)

Display board of the work as per E.I.C. incharge.

SECTION -B SITC of Automatic RO water purifier Machine with Uv protection and TDS controller on wall has a high purification capacity of 80-100 L/hr , Max duty cycle per day 500 LPD with filter change alarm for enhanced safety, Durable Stainless steel body. Dimension[ 505(L)*360 (W)*746(H)] code 11079 (Make: Kent/Bluestar/LG)

SITC of Automatic Water cooling machine of double tap (One for normal water other for cold water) of 40 liter capacity. Make: Blue Star

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand: Polycab/Finolex/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. nency fittings as required

i) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket, 16A Modular type switch, without plug top, 16A switch type SP MCB on 4 Module GI Modular type switch board with 4 Module top cover plate (Brand approved by EIC) flushed in wall incl. S & F switch board and top cover plate and making necessary connections as required

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes.

Shed and protection cell by fabricated G.I. angle strips with net covering and shed over the top with sheet

PART-D[BJRCY Girls Hostel Ajodhya, Bishnupur ]

SECTION -A Supply of 150mm dia PVC pipes & fittings schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I) standard length of 6 Mtr (Page 13, Item 19(II)A Sanitary & plumbing 2017)

Supply of 150mm Dia PVC strainer of approved make with adater conforming to I.S. 12818 specification . Standard length of 6 Mtr (Page 52, Item 6(IV)A Sanitary & plumbing 2017)

Supply of 150mm Dia Steel cutter piece with socket/CI plug cutter with bottom plug. (Page 53, Item 9 Sanitary & plumbing 2017)

Supplying, fitting and fixing in position 150mm Dia G.I. pipes of TATA make for underground works with all necessary accessories (Page 3, Item 2 Sanitary & plumbing 2017)

Supply, fitting and fixing 150mm Dia G.I. cap at top (Page 54, Item 18 Sanitary & plumbing 2017)

Supply of 32mm Dia PVC pipes & fittimgs schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I). Standard length of 3 Mtr (Page 13, Item 19(III)A Sanitary & plumbing 2017)

Supply of 150mm dia Flange schedule 50 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239 (Part-I) (Page 16, Item 19(III)G Sanitary & plumbing 2017)

Packing the angular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2mm to 5mm or the size approved by the E.I.C. including cost of all materials labour and equipment complete. (Page 55, Item 24 Sanitary & plumbing 2017)

Supply of 150mm heavy duty supporting clamp in two halves made of M.S. flat for holding 50mm N.B. Column pipe (Page 07, Item No-30 W.R.D.D. Schedule rates 2018)

Supplying of 50mm NB heavy duty supporting clamps in two halves made of MS flats for holding 80mm NB column pipes (Page 08, Item No-32 W.R.D.D. Schedule rates 2018)

Supply of 50mm Dia galvanised iron socket with I.S.I mark. (Page 103, Item 2 Sanitary & plumbing 2017)

Supply of 50mm Dia long screw (150mm long) (Page 108, Item 12 Sanitary & plumbing 2017)

Supply of 50mm Dia G.I. plain equal elbow of approved brand and make. (Page 105, Item 7 Sanitary & plumbing 2017)

Supplying of 50 mm Dia Medium quality G.I pipe (Page 102, Item 1 Sanitary & plumbing 2017)

Supply of 50 mm Dia G.I. plain tee of approved brand and make (Page 106, Item 8 Sanitary & plumbing 2017)

Supply of 50mm Dia G.I. bend. (Page 105, Item 6 Sanitary & plumbing 2017)

Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete lowering of pipes, strainers, blind pipes etc. complete. (b) For depth upto 250 meter for 150mm dia. Tube well with top enlargement of 250mm dia. (upto 50 metre). (i) First 50 metre. (Page 50, Item 2(b)(i) Sanitary & plumbing 2017)

Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete lowering of pipes, strainers, blind pipes etc. complete. (b) For depth upto 250 meter for 150mm dia. Tube well with top enlargement of 250mm dia. (upto 50 metre). (ii) Next 50 metre. (Page 50, Item 2(b)(ii) Sanitary & plumbing 2017)

Labour charges for lowering of pipe, strainers, blank pipe etc. and fitting, fixing the same including cutting, threading where necessary complete including bucket washing and other incidental works in this connection. (iii) 150mm dia G.I. Housing pipe. (Page 16, Item No-2 W.R.D.D. Schedule rates 2018)

Washing and developing tube well with air compressor pump and engine for 8(eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. (Page 55, Item 20 Sanitary & plumbing 2017)

Charges of mobilisation of drilling equipments, tools and plants etc. and transportation of departmental materials from sub-divisional store to work site and returning excess departmental materials if any, to sub-divisional store after completion of work. (Page 17, Item No-6 W.R.D.D. Schedule rates 2018)

Supplying & Installation of 1 phase electro motor pump set suitable for solar operation covering 1 years warranty for the following condition including loading-unloading and transportation etc. 1 HP ISI marked 1 phase 230 V pump-motor set having discharge at required head as bellows: (ii) Submersible pump-motor set for LDTW ISI marked as per IS:8304 with flow range of 53-77 m^3/ day at 30-44 mtrs head. (WRIDD solar S/n-9-c-iii dated- 16/07/2018)

Supply, transport, installation of Power Conditioning Unit including MPPT, Data Logger and IP54 enclosed inverter unit qualifying IEC61683- Enviroment standard, safety standard suitable for 1 phase AC motor, IGBT based high voltage switching inverterwith MPPt technology, to take care the variation of sunlight and will be suitably mounted inside the metal encloser. Inverter should have protection against dry run, over current, under current, over voltage, under voltage, short circuit etc. System should be able to run at low sunshine and minimum 7-8 hours a day to run should be possible during normal sunshine condition. Inverter should have option to auto start for any short trip off due to low light/cloudly situation except for dry run. Inverter should be provided with a display to show the various parameters by the user such as voltage, current, solar panel dc voltage, inverter IGBT temperature, output AC voltage, output frequency, pump flow (direct or calculated metod), irradiation etc. The system should be capable to store the data at a set interval and transfer it in a pen drive through USB port. It should also monitor and save total run time total water pumped etc. There for 1 HP capacity motor pump set. (WRIDD solar S/n-4 dated- 16/07/2018)

Supply, transport, installation and commissioning of MNRE/IEC approved solar module of multicrystaline cell with minimum efficiency of 15 % and fill factor more than 70% laminated between sheet of Ethylene Vinyl Acetate (EVA) and high transmissivity 3.2mm tempered glass, framed in anodized aluminium frame. The power output of individual PV modules in PV array, under STC, should be minimum 300Wp with adequate provision for tolerances. Modules supplied with the SPV system should have certificate as per IEC 61215 specification or equivalent national or international standard. Modules must qualify to IEC 61730 part I and part II for safety qualification testing and salt mist corrosion testing as per IEC 61701/IS 61701 and having warranty for uotput wattage, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Necessary test certificate should be supplied. (c) for1 HP grid system solar water pumping system (with multicrystalline PERC/bifacial spv module of Tata,Panasonic or Lubi solar- 1590 Wp with 320/325/330/335 Wp SPV panel.

Supplying, transport, installation of weather proof manual tracking structure made of MS channels, angles and pipes etc. duly IS marked channels and angles (IS 808) to hold SPV module with MS heavy duty pipe not less than 125mm as per IS 1239 and plate of IS 226. Structure like canopy supported with aRCC column to be installed to limit land requirement with a height of placement of panel for free human movement and natural air cooling will be happening to get the maximum efficiency from the modules. This structure should be designed considering all the possible loads on the solar panels and on the structure itself including wind load with basic wind velocity 150 km/hr. The steel structure of suitable size is to be protected with minimum 80 micron galvanization and provided with dual axis manual tracking arrangement three times in a day and seasonal tilting are to be provided to face the sun optimally. The weight of module structure having 6 module structure of 320/325/330/335 Wp SPV panels should not be less that 191 kg. (WRIDD solar S/n-2i dated- 16/07/2018)

Foundation of module mounting structure suitable and stable reinforced cement concrete foundation for dual axis manual tracking SPV module structure as per approved drawing (b) for six module structure having maximum capacity of 1980 Wp. (WRIDD solar S/n-3 dated- 16/07/2018)

Foundation of water tank mounting structure suitable for 2000 lts water tank at 2.5 mtr hight from the base level with table reinforced cement concrete foundation

Supplying, fitting and fixing of UV rated Copper cable laid inside HDPE conduit and other accessories as per following with necessary connection with the solar PV modules, MPPT, etc (i) 4.0 Sq.mm single core multi studs-10 mtrs (minimum), (ii) 6.0 Sq.mm single core multi studs-5 mtrs (minimum), (iii) Lugs, HDPE pipes, flexible pipes, saddle, cable tie etc. For 5 HP per structure. (WRIDD solar S/n-5 dated- 16/07/2018)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe including excavation of soil for installation of each electrode and filling and ramming and (hot dip) MS flat on wall/floor with GI saddle as requiredand connection to equipments incl. drilling holes with bolts, nuts, washer etc. complete. (WRIDD solar S/n-6 dated- 16/07/2018)

Supplying, fitting and fixing conductor air terminal made 20mm dia 1000mm long GI pipe (ISI medium) having 5nos. Discharge prongs of 4 SWG GI (hot dip) wire at top duly soldered with 7/16 standard GI (hot dip) wire (4 mtr. Long), 20mm dia X 125mm long galvanized bolt, double nut, doublr washer including socketing at both end standard GI (hot dip) wire by crimping sockets/thimbles and S&F 40mm dia GI pipe (ISI medium) protection (3 mtr. long) to be filled with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.65 mtr. (WRIDD solar S/n-8 dated- 16/07/2018)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 1000 litre capacity (P-37, It-6) with establish on civil construction, consisting earth work in excavation of foundation trenches in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom,(payment to be made on measurement of finished quantity), single BFS, Ordinary cement concrete of 1:1.5:3 ratio with grated stonechips, 125mm thick brick work with 1st class bricks in; cement mortal (1:4), Net cement panning, incl. supplying, fitting and fixing of 80mm dia. PVC pipes of approved make (medium duty) conforming to ASTMD-1785 and complete in all respect as per drawing & direction.

Labour for punching hole in plastic water storage tank upto 50 mm dia. (P-38, It-13)

Labour for hoisting plastic water storage tank (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 2 nd story from G.L (P-37, It-10)

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). (P- 6, It-7 [a])

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

(a) For Exposed Work PVC Pipes (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Socket (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Elbow (Dia) 15 mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) Tee (Dia) 15 mm

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, C.I. heavy brackets with two coats of approved paint. (i) 600 mm X 450 mm X 200 mm

Supplying, fitting and fixing pedestal of approved make for wash basin (white)

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 50 mm dia (P-4 , It-4)

Supplying fitting fixing fabricated GI Kiosk Box one side openable of size 1000mm X 600mm X 650mm mounted by 4 nos legs and frame made of GI angle 65 X 65 X 6mm. All sides are cover with 3mm GI sheet on the frane of GI angle 25 X 25 X 3mm with back side cover made of 1.5mm thick GI sheet and providing GI channel door made of 25 X 25 X 3mm GI channel inside the box for fitting the electrical equipment with locking arrangement.

Testing and commissioning of the scheme after completion of all works. (WRIDD solar S/n-10 dated- 16/07/2018)

Display board of the work as per E.I.C. incharge.

SECTION -B SITC of Automatic RO water purifier Machine with Uv protection and TDS controller on wall has a high purification capacity of 80-100 L/hr , Max duty cycle per day 500 LPD with filter change alarm for enhanced safety, Durable Stainless steel body. Dimension[ 505(L)*360 (W)*746(H)] code 11079 (Make: Kent/Bluestar/LG)

SITC of Automatic Water cooling machine of double tap (One for normal water other for cold water) of 40 liter capacity. Make: Blue Star

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand: Polycab/Finolex/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. nency fittings as required

i) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket, 16A Modular type switch, without plug top, 16A switch type SP MCB on 4 Module GI Modular type switch board with 4 Module top cover plate (Brand approved by EIC) flushed in wall incl. S & F switch board and top cover plate and making necessary connections as required

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes.

Shed and protection cell by fabricated G.I. angle strips with net covering and shed over the top with sheet

SECTION-C SITC of Automatic Sanitary Napkin Vending Machine on wall has a capacity of 100 nos pads (230V, 50Hz), having 1.2mm thick powder coated MS enclosure (23*6*31 inch) H*W*L of AVM100 weight approx 18kg. Coin accepted INR 1, 2 & 5 (customisable)

SITC of Automatic Sanitary Napkin Incinerator/Dispoal Machine on wall has a capacity ranging from 100 to 250 nos pads; capacity/cycle: 7-8 pads (230V, 50Hz electric supply), having 1.2mm thick CRCA steel enclosure (16*8.5*10 inch) H*W*L of INC100 weight approx 10kg. Internal housing: 4mm insulation, auto cut-off system with MCB protection, Heater:1000 watt, insulated magnetic doors with total air tight cabinets, Smoke outlet: Top by steel pipe 1.2m comes free with the machine

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand: Polycab/Finolex/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. nency fittings as required

i) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket, 16A Modular type switch, without plug top, 16A switch type SP MCB on 4 Module GI Modular type switch board with 4 Module top cover plate (Brand approved by EIC) flushed in wall incl. S & F switch board and top cover plate and making necessary connections as required

Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc. including supplying sockets, tapes.

Supply of leak proof M/L/XL/ extra large super hygine sanitary napkin with fast absorvance.( whisper,stayfree,go girl,nine,Pari)

Swarnendu Sarkar (BID ID -5970922)

TAPAN KUMAR SARKAR (BID ID -5970848)